SQL 2012 :: Error Trying To Backup
Sep 1, 2014
I'm trying to create a maintenance plan to backup one of my databases however it's failing and I'm receiving the below erorr.I am able to back up other databases without issue to the same location and I have sysadmin permissions.
Message
Executed as user: W2K8SQLSYSTEM. ...ion 9.00.5000.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 10:13:53 AM Progress: 2014-09-02 10:13:54.01 Source: {A7AE97F0-9186-4385}
Executing query "DECLARE @Guid UNIQUEIDENTIFIER
EXECUTE msdb..sp".: 100% complete End Progress Progress: 2014-09-02 10:13:54.35
[Code] .....
View 4 Replies
ADVERTISEMENT
Aug 23, 2013
On the SQL Server the Event Viewer shows the same messages and errors every evening between 22:05:00 and 22:08:00. The following information messages are shown for every database:
"I/O is frozen on database <database name>. No user action is required. However, if I/O is not resumed promptly, you could cancel the backup."
"I/O was resumed on database <database name>. No user action is required."
"Database backed up. Database: <database name>, creation date(time): 2003/04/08(09:13:36), pages dumped: 306, first LSN: 44:148:37, last LSN: 44:165:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'{A79410F7-4AC5-47CE-9E9B-F91660F1072B}4'}). This is an informational message only. No user action is required."
After the 3 messages the following error message is shown for every database:
"BACKUP failed to complete the command BACKUP LOG <database name>. Check the backup application log for detailed messages."
I have added a Maintenance Plan but these jobs run after 02:00:00 at night.
Where can I find the command or setup which will backup all databases and log files at 22:00:00 in the evening?
View 9 Replies
View Related
Jul 11, 2014
I'm trying to backup my databases to another backup server though I'm receiving the attached error.
the SQL service is logged on as "Network Service"
View 7 Replies
View Related
Aug 12, 2014
SQL server 2012, SP1
DB is in SIMPLE recovery mode (total size 124 GB). Log file Initial size is 650 MB auto growth set for 500 MB.
Below is the error I am facing.
Could not clear 'DIFFERENTIAL' bitmap in database 'DBSAPCAD' because of error 9002. As a result, the differential or bulk-logged bitmap overstates the amount of change that will occur with the next differential or log backup. This discrepancy might slow down later differential or log backup operations and cause the backup sets to be larger than necessary. Typically, the cause of this error is insufficient resources. Investigate the failure and resolve the cause. If the error occurred on a data backup, consider taking a data backup to create a new base for future differential backups.
A nonrecoverable I/O error occurred on file "//SQLDIFF/SAPCAD_DBSAPCAD.bak:" 995(The I/O operation has been aborted because of either a thread exit or an application request.).BACKUP DATABASE is terminating abnormally.
In the weekend we faced an error on the DB backup.Drive K got full because of database log file grown and we have 4 MB free space left. I have no option to increase the drive space nor the log file size.
I am unable to perform, full or differential backup for this db.
View 9 Replies
View Related
Feb 4, 2015
is it possible that this error during backup caused Sort Warning???
I sent to support of our Storage and he make result that this caused jobs which have Sort Warning....
if I checked this error on internet, i found problem with Storage or it can be also lot of fullscan and etc.
So it can be also that Order By caused some reading directly from disk and not from memory ? maybe if there is using tempdb right ?
View 3 Replies
View Related
Feb 19, 2015
Using Ola Hallengren's scripts I do a full backup of a database on a Sunday. Then differential backups every 6 hours and log backups every hour. I would like to keep a full week of backups based off the full backup done on Sunday. Is there a way for me to clear out the diff and log folders after the successful full backup on Sunday nights?
View 2 Replies
View Related
Dec 29, 2014
I'm looking to schedule a maintenance plan for my databases which I have done.I'd like this database to be copied to another folder and the name altered to include the file name and the current date time stamp.Is this possible in the scheduled maintenance plan?
View 4 Replies
View Related
Nov 3, 2014
I scheduled automatic backup process but its only showing backup of the only one .sql file in the backup folder. Other created .sql files are not backed up. Why is it so?
View 5 Replies
View Related
Feb 9, 2004
Hi,
I use the Transact-SQL BACKUP statement in Visual Basic to backup my local MSSQL Database. It give me this error
Error 3041
BACKUP failed to complete the command BACKUP DATABASE [BCFPC] to BCFPCBKP
I already created a backup device called BCFPCBKP and it is backup to the disk.
I tried to run the same BACKUP statement in SQL Query Analyzer and it worked fine. I tried to run my VB application in another PC. It worked fine when i use this command remotely. Can anyone tell me what's the problem?
Thanks in advance
regards,
M.Y. Yap
View 2 Replies
View Related
Aug 8, 2007
Hello,
I have MS SQL 2005 server with 300+ databases on it. The application is set up that way that it creates a new database as needed (dynamically). Do not ask me why - I hate this design... So, it can create 3-4 databases a day (random time).
I've scheduled full backup of all databases to run once at night, and it runs just fine. Besides that, I have scheduled tran logs backup of all databases to run every hour. This backup fails from time to time with the following error:
Executing the query "BACKUP LOG [survey_p0886464_test] TO DISK = N'D:\backups\log backups\survey_p0886464_test_backup_200708072300.trn' WITH NOFORMAT, NOINIT, NAME = N'survey_p0886464_test_backup_20070807230002', SKIP, REWIND, NOUNLOAD, STATS = 10
" failed with the following error: "BACKUP LOG cannot be performed because there is no current database backup.
BACKUP LOG is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
So, I think what happens is since my full backup of all databases are scheduled to run only once at night, and tran logs every hour, when new database is created during the day, there is no full backup for it, that is why tran logs backup fails. Becuase after the failure, if I run full backup again, then tran log runs just fine afterwards.
I am new to MS SQL Server, I am mostly working with Sybase IQ. Do you know if I can "trigger" full backup every time when new database created to avoid tran lof failure?
Or is it possible to schedule full backup to run if tran log backup fails?
Any advice will be much appreciated.
View 1 Replies
View Related
Oct 21, 2014
I'm wondering if I can take native SQL log backup in addition to DPM backups. We're using DPM for both databases (daily) and logs (every 15min). So, if I take SQL log backup separately, will it break anything in DPM and we won't be able to perform point it time recovery?
View 3 Replies
View Related
Jan 5, 2015
On a SQL 2012 Enterprise (SP2) instance, I have a database that is 12gb. The size of its backup file is 10gb. With compression I was expecting the backup size to be around 4gb. This database was migrated from SQL 2005 along with other databases that seem to be compressing ok. The instance is set to compression as the default. The database is not encrypted. It contains mainly character data. Compression is also specified in the maintenance plan. Have also trying running backup as a script. The instance is hosted on a virtual server (Windows Server 2012 R2).why this backup is not compressing?
View 9 Replies
View Related
Jan 28, 2015
Looking at the documentation, it would suggest that as well as data files, when a backup file's created it will also be zeroed out unless the service a/c's been given Perform Volume Maintenance.
We take our backups to dedicated backup servers, meaning backup performance should improve significantly if instant file initialization's given to the Service account logins for the source boxes if I'm right.
View 4 Replies
View Related
Feb 23, 2015
We need to setup an AO availability Group for a database for which a full backup exists but the DB is in simple recovery mode now. If i change the recovery mode to full and try to configure AG will this full backup will be used or do i need to create a new full backup.
View 4 Replies
View Related
May 13, 2013
I'm setting up my first pair of Sql 2012 servers using AlwaysOn. I set up backups to run on the primary and I understand that you can set up backups to run on both the primary and secondary servers but the secondary will fail. Is there a way I can stop the secondary server from sending out error messages about failed backups? Is it possible to script it so that the server looks at whether it's primary or secondary and turns on or off alerts based on that?
View 8 Replies
View Related
May 21, 2014
We're changing Netbackup to DPM but not sure if "backup compression default" option should be ON or OFF or doesn't matter.
View 3 Replies
View Related
Aug 21, 2014
If I try to backup of database in sql 2012 with t-Sql as follows:
Backup database db1
to disk='c:myfullbkup.bak' with init
go
This code works absolutely fine.
But if I try to take backup through SSMS -Task -Backup in object explorer and gave the same path of c: drive or any other folder outside sql default "Backup" folder.It gives error as access denied.This was not the scene in Sql server 2008.
View 8 Replies
View Related
Sep 2, 2014
When performing a backup I'm reciving the error message: "System.Data.SqlClient.SqlError: Cannot open backup device. Operating system error 5(error not found). (Microsoft.SqlServre.Smo)
This is backing up to a network location and I'm able to backup other database on the same server/instance without error so it shouldnt be a permissions issue?why I can backup some databases to this location and not others?
View 1 Replies
View Related
Sep 3, 2014
My intention is to make a copy of a database with some data excluded. One way to do this:
- Make a copy-only backup of the source database
- Restore the backup as a new database
- Delete undesired data from the new database
In my case, the source database has two file groups, primary and secondary. The secondary has just one table with huge amount of data and this file group appears as one physical file. Is there any way to make a partial backup, which does not include this file group or table, and it would still be possible to restore the backup to a new database? My point is to avoid copying huge amount of data if it won't be needed.
View 2 Replies
View Related
Sep 23, 2014
I am using Ola's solution for db backups by the way and its main command is something like this:
sqlcmd -E -S $(ESCAPE_SQUOTE(SRVR)) -d DBgrowth -Q "EXECUTE [dbo].[DatabaseBackup] @Databases = 'MyDatabase1, MyDatabase2', @Directory = N'serverpath', @BackupType = 'FULL', @BackupSoftware = 'SQLBACKUP', @Compress = 'Y', @CompressionLevel = 2, @NumberOfFiles = 5, @Verify = 'N', @CleanupTime = 504, @CheckSum = 'N', @LogToTable = 'Y'" -b
where MyDatabase1 and MyDatabase2 are clients abover 100GB.
Now, I would like to make this dynamic, no user intervention. I already have a table where I'm keeping current and historical data of db sizes.
How can I make this job dynamic, so when a new database passes the 100GB threshold, their names will be part of @Databases parameter? In other words, added automatically, based on my query.
View 7 Replies
View Related
Jan 29, 2015
I have TDE backup one serverA but There is no backup of certificates or keys from Server A. And no one knows the password used to create those backups. How do you restore the database XYZ at that time on Server B?
View 9 Replies
View Related
Jan 29, 2015
Looking at the recovery model on MSDN - was under the belief from it that if you set your database to use the simple recovery model, then when you preform a full back up it would truncate the transaction log file but this doesn't seem to be the case?We aren't looking to do a point in time recovery for this particular databse.
View 7 Replies
View Related
Jul 6, 2015
what is the concept of smart backup in sql ?
View 1 Replies
View Related
Aug 6, 2015
Proposed configuration:
Using a centralized backup server from which to run SQL backups. (this server is not part of this AVG)
AVG with backup preference set to primary.
SQL backup (daily full and hourly logs run from centralized backup server) with target set to AG Listener name.
Any failover should still target Primary Replica.
View 2 Replies
View Related
Nov 2, 2015
2 Boxes in HA, identical hardware (VMs) and both utilising identical storage systems (Nimble SANs).Was needing to do a copy only backup of a few databases for an escrow environment we have, so decided to perform this on the secondary box.Small ~10GB ish database first, seemed to be really slow, so opened resource monitor and noticed that disk read / write was getting limited to about 15MB/s so took a little while (the big one is over 1TB)
Tried this again on the primary it was done in seconds disk rate in the order of 250MB/s (same settings re compression etc).. I decided to make a copy of the backup file on the secondary, the copy disk to disk went in the region of 150MB/s , so it appears that SQL Server is the bottleneck?
View 3 Replies
View Related
Feb 25, 2013
Recently migrated from 2008 to 2012. Everything is working fine; however went to take my first set of backups today and one of them blew up:
Executing the query ...
Backup and restore errors: Unexpected number of disk files associated with database object. Possible cause for that is missing or corrupt cryptokey.bin or detach.log file.
Execution complete
Not finding much online on the specific error.
- Data source is valid
- Can process the cube
- Can query / navigate cube
Next step would be drop/recreate; however this is an older cube that I'd prefer to leave alone at this stage if possible.
View 1 Replies
View Related
Feb 28, 2014
I have a DB, MDF is about 170GB, log 200GB. When I do a restore of it, the backup takes about 20 minutes to get to 100% but then it just stays there in Restoring Mode.
I have specified the WITH RECOVERY option.
What is happening that it doesn't commit the backup for some reason?
View 2 Replies
View Related
Mar 27, 2014
I'm working on a project where I need to build a small database and then copy it to a server at the client's site. I can't connect directly, so I have to use a VPN connection and use Remote Desktop, copy the database backup from my machine to the cloud, then download it to the client machine. The project is still in the early stages, and the client is still sending me data in CSV files and Excel spreadsheets. I'm periodically needing to do a complete refresh of the database at the client. I've hacked my way through it a couple of times, but I need to know the proper way to do it. I get errors on the restore step, telling me the file is in use.
View 8 Replies
View Related
Apr 21, 2014
finding the database size from the backup file.I have SQL 2012 backup file, is there any way to find the estimated database size from the backup.I tried restoring , i got an error saying " no space need additional xxx bytes " ...does this error gives the exact space needed to restore ?
One more question....one of the backup file size is 7.2 GB, when i try to restore it ....it throws error saying it needs 292GB extra space while only 100 Gb is available. How come 392 Gb sized database becomes 7.2 Gb .bak file ?
View 5 Replies
View Related
May 20, 2014
I'm using SQL Server 2012 Enterprise Edition, and i Enable CDC to started the service.
I've set up CDC on multiple tables, and I see them (under system table)
While the database backup (export file 'BAK'), and imports I do not see the tables of the CDC.
1. Condition restore / backup is full.
2. Carried out an attempt to copy the MDF & LDF files (replace them), to no avail.
How to back up data of these tables.
View 4 Replies
View Related
Jun 18, 2014
how to backup and restore SQL Server databases using ssms in sql server 2012
View 2 Replies
View Related
Jun 19, 2014
I am having issues with Restoring the Backup of same Database on to the same server , as i know like many of you will be asking y i need to restore on same server.. Well the need came in that way , now i think i know the problem (i.e) The Orginla DB is there and also i am restoring the same DB again on that server, so .mdf and .ldf will be same .
View 8 Replies
View Related
Sep 23, 2014
I've an emergency requirement to copy Source server database backup files to destination Server through xcopy command. Backup job on source server runs daily, so once this job get completes all databases backups needs to be moved to destination server. But here the main concern is "the backup files on destination server shouldn't be overwritten, they should be placed separately as Source server job runs daily".
We've a command which overwrites backups on destination server. But we need to keep backups on destination at-least for 4 weeks (means : retention should be 4 Weeks).
View 5 Replies
View Related
