SQL 2012 :: Error When Attempting To Start Local Server?
Feb 16, 2014
I've opened port 1433 in the Config Manager (error: The request failed or the service did not respond in a timely fashion.)
My Shared Memory Protocol is enabled, I've confirmed that the Server is allowed in Windows Firewall, I've configured the SQL Server to allow remote connections, I've started the SQL Browser with success....
I also receive the error message that (The MSSQL$SQLEXPRESS service on .... started and then stopped (Object Explorer)).
I uninstalled and reinstalled SQL Server Express 2012 and get the following failures:
Database Engine Services
SQL Server Replication
I think this the the core of my issue. how to remedy this?
View 1 Replies
ADVERTISEMENT
May 26, 2007
i'm getting the following error message when i attempt to configure my server as a local distributor:
TITLE: Connect to Server
------------------------------
Cannot connect to 9A6375C3046246B.
------------------------------
ADDITIONAL INFORMATION:
Failed to connect to server 9A6375C3046246B. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
this error is occuring despite the fact that i have the server configured to allow remote connections. can someone please help me troubleshoot this error? thanks.
View 11 Replies
View Related
Mar 16, 2008
I receive the following error when trying to add a local database to my project.
"The data provider required to connect to the local data file could not found. The file will be added to the project but the typed DataSet associated with the file will not be generated."
I've reinstalled VS2k8, SQL Compact 3.1 and SQL Compact 3.5 on my machine and still receive the error.
Does anyone have any suggestions? I saw another similar thread about this in the VB2k8Express forum, but there were no helpful answers there. (for the curious: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2769854&SiteID=1)
I haven't used the SSCE before and so it's possible I've mistakenly omitted some required items.
Any help is greatly appreciated.
View 4 Replies
View Related
May 4, 2015
Since a couple days, we are getting this message the errorlog of one of our SQL2012 server
LogEntry: Error [36, 17, 145] occurred while attempting to drop allocation unit ID 451879652360192 belonging to worktable with partition ID 451879652360192.
(version Microsoft SQL Server 2012 - 11.0.5058.0 (X64))
I am wondering what is the best way trying to troubleshoot this issues? I do not know from which of out database this is coming.
View 6 Replies
View Related
Apr 15, 2015
I'm attempting to improve a vendor created query.
Here is the original -
SELECT m.lID
FROM Message m
inner join Message_Cc mCC on m.lID=mCC.lMessage and mCC.lOfficeRecipient = 200321
INNER JOIN UserRole d on mCC.szRecipient=d.szRoleName
inner Join Map_UserAtOfficeToRole a2 on a2.lUserRole = d.lid AND d.nRecordStatus = 1
[Code] ....
If I run this without the LEFT OUTER JOIN and the is null statement I get 648 rows. But If I include it I get 0 rows. I can't understand why I get 0 rows with the outer join.
View 9 Replies
View Related
Apr 3, 2008
I have managed to get the Forms Authentication sample to work bu there is a hitch. I am running Report Server and Report Manager on the same(test) PC. I can logon to the Report Server without a problem but when I try logon from the UILogon.aspx page for Report Manager I receive the following error:
An error occurred while attempting to get the ReportServer Url. The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
An error occurred while attempting to get the ReportServer Url. The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)An error occured while attempting to get the ReportServer Url. The RPC server is unavailable.(Exception from HRESULT: 0x800706BA).
I can register users which suggests that the page can connect to the database.
Any help???
View 3 Replies
View Related
Jan 20, 2007
HI,
I tried to deploy reports on locahost. Yet, I still need to start the mssqlserver service on local computer. I tried all the possibilities shown from the help but still i can't have it started. How will i start mssqlserver service on local computer alone?
thanks
View 1 Replies
View Related
Apr 22, 2008
Hi,
I'm trying to install Microsoft SQL Server 2005 Express Edition (x86) on my laptop when a setup failure message would show up at the end. When I clicked for more details it has the followings:
Product Version 9.00.3042.00
Message Source setup.rll
Message ID 50000
EvtType sharedsetupsharedsetupactions.cpp
And later when I tried to uninstall it from Add/Remove Program the screen would simply flash when I click but nothing happens.
Please let me know what do I need to install the piece correctly, thanks!
Andrew
View 5 Replies
View Related
May 15, 2006
I successfully installed SQL Server 2005 SP1 on one PC. When I attempt to install it on a second PC, however, I get the following obscure error:
Unexpected Error Occurred
The following unexpected error occurred:
That's right, there's nothing else listed, other an OK button. D'oh! When I press the OK button, the following error report dialog box appears:
Hotfix.exe
A recently applied update, NULL, failed to install.
There are no pending updates that I'm aware of, as I just booted the PC. I sent the error report.
I notice on this particular PC that the SP1 install EXE is expanding/writing to an external SCSI drive; would that make a difference? I don't see a way to specify a different (i.e., internal ATA drive).
Any other ideas?
View 18 Replies
View Related
Sep 18, 2006
I'm unable to use SSIS packages after installing SQL Server 2005. Specifically when I first loaded a new Integration Services project in SQL Server Business Intelligence Development Studio the default SSIS package could not load, I get Package.dtsx in my tabbed document view but in the body of this window is a error message: "Microsoft Visual Studio is unable to load this document. QI for IEnumVARIANT failed on the unmanaged server."
If I try to use the SQL Server Import and Export Wizard shortly after the window to select your data source I get a pop-up error message:
This wizard will close because it encountered the following error:
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.42&EvtSrc=Microsoft.SqlServer.Management.UI.WizardFrameworkErrorSR&EvtID=UncaughtException&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
QI for IEnumVARIANT failed on the unmanaged server. (CustomMarshalers)
Anyone have any ideas on how I can resolve this?
View 1 Replies
View Related
Apr 5, 2006
I'm working through the SQL2005 Reporting Services Tutorial. When I try to deploy, I get the error "Connection could not be made to the report server." It appears that I do not have permissions to get to localhost/reportserver (I get a permissions error when just trying to get there directly from "run"). In another forum I saw several people having the same issue. One contributor said that the problem was solved for him by uninstalling SQL2005 and reinstalling using the local system account rather than a windows domain account. I tried that, but am getting the same error. Anyone know how to fix this?
View 18 Replies
View Related
Oct 18, 2007
Hi all:
We currently have a production server (prodserver) and backup server (backupserver) in the same domain, and I am attempting to backup dbs from the production box on to the backup box using the following:
backup database db to disk = '\backupservere$ackupdb.bak' with init
when executing from SSMS, I receive the following error:
Msg 3201, Level 16, State 1, Line 1
Cannot open backup device '\backupservere$ackupdb.bak' Operating system error 1326 (Logon failure: unknown user name or bad password)
Here's where the issue lies for me:
Both the production and backup box are running services under the same domain accounts, let's call it "domainsqlagent"
domainsqlagent has domain admin rights on backupserver and prodserver
I can login to both the production and backup servers using the domain account, map drives, hit administrative shares, drag and drop files, etc between the servers
If I use xp_cmdshell to try and simply move a file between prodserver and backupserver, I receive the above error as well. However, if I open an cmd window and execute the move command from DOS, it will successfully move.
There is a development server on the domain as well (devserver) using domainsqlagent to run the service accounts, and I can successfully backup databases from dev to prod, dev to backup, backup to dev, backup to prod, prod to dev, but NOT prod to backup
Finally, if I create a maintenance plan in SSMS, I cannot create a connection to the backup server (error reads the connection may not be configured correctly or you may not have the right permissions on this connection)
The backup server was changed to a different domain (domain2) before I arrived here, but has been switched back now, rebooted, service accounts changed via Configuration Manager, services restarted (and rebooted again for good measure).
Does SSMS use a different security context to create the connections to remote servers? From all my tests, the domainsqlagent account has all the correct rights and is working OK. Could this be a network issue? The network admin and I have been banging our heads against a wall for the past couple of days, so if anyone has seen something like this, I'd appreciate any help.
Thanks,
Craig
View 3 Replies
View Related
Mar 10, 2014
I am trying to start a job on a sql 2008 r2 server from a sql 2012 server. I have the following code:
exec msdb.dbo.sp_start_job @job_id = '74882103-8596-4578-9C58-C43806113E17'
,@server_name = 'Server 2';
And I get the following error:
Msg 14262, Level 16, State 1, Procedure sp_verify_job_identifiers, Line 41
The specified @job_id ('74882103-8596-4578-9C58-C43806113E17') does not exist.
I have also tried @job_name to no avail. Even tried using a 4 part name "Server1.msdb.dbo.sp_start_job" and I get the same error.
View 6 Replies
View Related
Dec 29, 2004
I dont know how this happened but my (local) SQL Server wont start. I cant access any of the databases. I just get this error:
'A connection could not be established to (local).
Reason: SQL Server does not exist or access denied.
ConnectionOpen (Connect())
Please verify SQL Server is running and check your SQL Server registration properties (by right-clicking on the (local) node) and try again.'
If I go to check the properties I get the same error. Im completely locked out. I looked at the folder and the database files are there, but I cant get to them through Enterprise Manager.
I have no idea how this problem could have happened. It just seemed to have stopped working. All my other databases can be reached (they are external). Could this be a virus or something? Can someone help me out on this one? I dont have a clue what the problem is, much less how to fix it.
Thanks.
View 1 Replies
View Related
Aug 4, 2014
First time I've tried doing this - I have SQL Server 2012 installed on my local machine with an instance running (which was set up under an administrator account, not mine, which has no admin rights), and I'm trying to create a linked table from Access (also on the local machine) to a table on the server.
I tried creating a DSN using Windows Authentication, using the server name which is the same as my computer name, and got the error "Error 18452, Login failed. The login is from an untrusted domain and cannot be used with Windows authentication".
I then created a SQL authentication user ID and password, and tried the same thing using that instead, and got "Login failed for user <myusername>"
Is there some particular setting on the local instance I need to change to allow this kind of connection, or do I need to use something other than the server name to connect, such as an IP address? Remember that I have no admin access on this machine so any solution would have to avoid requiring that.
View 3 Replies
View Related
Aug 3, 2014
I am attempting to create a new trace but I get the following error message: "failed to start a new trace".
I have been doing some digging and as I understand it, I had to find the directory Profiler uses for temporary files. So, I typed the following in the command window "SET TMP" and I received the following reply:
C:UsersRossAppDataLocalTemp
Now, according to the forum: [URL] ...
I am supposed to check that the system folder pointed to by the TMP environment variable exists and is not crammed with files.
Well, when I went to the directory C:UsersRossAppDataLocalTemp, it is indeed full of both files and directories. The size is 16.3 MB and has 133 files and 63 folders.
When I had a look at the Environment Variables window and chose TMP the value is "%USERPROFILE%AppDataLocalTemp" which according to my limited understanding is the equivalent to C:UsersRossAppDataLocalTemp.
So, what I am wondering is am I supposed to totally clear out this directory? I am not too keen on doing this because I don't want to stuff my PC up.
View 3 Replies
View Related
Mar 3, 2015
I am working with a stored procedure that needs to roll up a week number column once a week - columns are numbered 1-10, 1 being this week, 2 being last week and so forth
Once a week the 10th column is deleted, the 9th becomes 10, the 8th becomes the 9th and so forth and the 1st is calculated the week numbers are getting all screwed up - and we think it's because one statement starts before the one before it completes the statements go like this:
delete theTable where week_num=10;
update theTable set weeknum=10 where weeknum=9;
update theTable set weeknum=9 where weeknum=8;
and so forth
is that the reason? is there any way not to start one statement until the one before it finishes?
View 2 Replies
View Related
Jun 23, 2014
Using server 2012 on local machine, I created an SSIS package that will execute in integrated services and Visual Studio solution but will not work when creating a job. Other solutions work well except when exporting data. The program pulls data from query and exports into .csv file. The messages I get are -
Data flow task 1:error:destination- Stage.csv failed the pre-execute phase and returned code 0xC020200E
and
Data flow task 1:error:Cannot open the datafile "pathStage.csv".
Version-
Microsoft SQL Server Management Studio11.0.3128.0
Microsoft Analysis Services Client Tools11.0.3128.0
Microsoft Data Access Components (MDAC)6.1.7601.17514
Microsoft MSXML3.0 6.0
Microsoft Internet Explorer9.11.9600.17041
Microsoft .NET Framework4.0.30319.18444
Operating System6.1.7601
View 1 Replies
View Related
May 28, 2014
I am getting the error 'Incorrect syntax near the keyword set' with the following code snippet -
declare @dteTo Date
set @dteTo = CONVERT(date, GETDATE())
My intention is to set the variable @dteTo to the current date (no time component). If I run a SELECT CONVERT(date, GETDATE()) command I do get what I want, it is just assigning the value to the variable that isn't working as intended.
View 8 Replies
View Related
Feb 17, 2007
I've just installed SQL Server Express and attempted to create my first database and received this error message :-(
Maybe this is a long shot, but can someone tell me what I've done wrong? Do I have a bad install or what?
Essentially I followed the steps below to create the database:
1. Started MS SQL Server Management studio Express
2. Right clicked on the Database folder
3. Selected "New Database..."
4. New Database panel displayed
5. Entered name of database - pip
6. Clicked "OK"
7. Receieved error dialog with followig message:
TITLE: Microsoft SQL Server Management Studio Express
------------------------------
Create failed for Database 'pip'. (Microsoft.SqlServer.Express.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Create+Database&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo)
------------------------------
Could not obtain exclusive lock on database 'model'. Retry the operation later.
CREATE DATABASE failed. Some file names listed could not be created. Check related errors. (Microsoft SQL Server, Error: 1807)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.2047&EvtSrc=MSSQLServer&EvtID=1807&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
View 1 Replies
View Related
May 3, 2006
Here is the error:
TITLE: SQL Server Import and Export Wizard
------------------------------
An error occurred which the SQL Server Integration Services Wizard was not prepared to handle.
------------------------------
ADDITIONAL INFORMATION:
Exception has been thrown by the target of an invocation. (mscorlib)
------------------------------
The connection type "EXCEL" specified for connection manager "{55E5636D-F2A9-48D6-9723-867C9F241F5B}" is not recognized as a valid connection manager type. This error is returned when an attempt is made to create a connection manager for an unknown connection type. Check the spelling in the connection type name.
({F390DBA3-1B52-43F4-A624-9E71D273B4D7})
I really need to get this data into SQL server... why do I have to go through SQL 2000?
Regards,
View 7 Replies
View Related
Sep 19, 2005
I have a log table with no indexes, triggers, or keys. During the course of development, I will clean out the entries by selecting all the rows (in Database Explorer) and hitting the delete key.
View 6 Replies
View Related
Sep 15, 2005
Hello, PLEASE Help me.I have just installed the Quick Starts on my local machine, and it mentions that you will need a new instance of SQL called (local)/NetSDK.I already have the MS Personal Edition and the tutorials say to download the MS Desktop Engine. So what do i need to do in order to get teh Quick Start samples to work locally???Can i not just use my own instance and use the Grocer and other Databases there???Please Help
View 1 Replies
View Related
Apr 6, 2008
I am new to SQL Server 2005 Reporting Services and I€™m having problems starting the service. I am running a Windows XP SP2 with SQL Server 2005 and reporting services but the service will not start. My SQL Server instance logs on using €˜Windows Authentication€™ using a username sysadm with no password
I have installed IIS and made sure that ASP.net is running.
I have opened up the Report Services Configuration Manager and amended the settings but I€™m unable to get the service started!!!
Theses are my settings
i) Report Server Virtual Directory OK
Name: ReportServer1
Website: Default Web Site
ii) Report Manager Virtual Directory
Name: Reports1
Website: Default Web Site
iii) Windows Service Identity
Service name: ReportServer
Service Account: NT AuthorityLocal Service
Iv Web Service Identity (NOT WORKING)
v) Database Setup
Servername €“ Nameofmyserver
Database name - ReportServer1
Credential Type Server Credentials
When I click on start no error message appears, it just seems to time out.
View 5 Replies
View Related
Apr 30, 2015
Need script for below.
1)Add the user ''ADabc' to local admin group in server.
2)Create login 'ADabc' and Grant sysadmin access for ADabc
View 3 Replies
View Related
Mar 21, 2015
I have the table below and like to create a view to show the no of days the property was vacant or void and rent loss per month. The below explanation will describe output required
For example we have a property (house/unit/apartment) and the tenant vacates on 06/09/2014. Lets say we fill the property back on 15/10/2014. From this we know the property was empty or void for 39 days. Now we need to calculate the rent loss. Based on the Market Rent of the property we can get this. Lets say the market rent for our property is $349/pw. So the rent loss for 39 days is 349/7*39 = $1944.43/-.
Now the tricky part and what im trying to achieve. Since the property was void or empty between 2 months, I want to know how many days the property was empty in the first month and the rent loss in that month and how many days the property was empty in the second month and the rent loss incurred in that month. Most of the properties are filled in the same month and only in few cases the property is empty between two months.
As shown below we are splitting the period 06/09/2014 - 15/10/2014 and then calculating the void days and rent loss per month
Period No of Void Days Rent Loss
06/09/2014 - 30/09/2014 24 349/7*24 = 1196.57
01/10/2014 - 15/10/2014 15 349/7*15 = 747.85
I have uploaded a screenshot of how the result on this link: [URL] ....
Declare @void Table
(
PropCode VARCHAR(10)
,VoidStartDate date
,LetDate date
,Market_Rent Money
[Code].....
View 4 Replies
View Related
Sep 16, 2006
Hi,
We have a little problem for you:
We have 2 servers both running sqlexpress2005, both have service pack 1 installed, both have the same db (same tables etc.) both have the same users with the same passwords. Everything is identical.
What I want to do is move the db. I am attempting to do this by making a backup of the db and restoring it into the second machine. (I am not sure of a more practical way to do this without stopping the SQL server).
This is the problem, the backup process works fine, without error, but when restoring the copy to the other server ,it loses the dbowner property and all default users when attempting to connect recieve a 4064 error even though all the password for users are there. Very strange.
I tried to restore the copy to to the same server that I made the copy and everything works, this only happens when attempting to restore the copy on another machine.
Do you know if this is a possible bug? I have tried to do further test on 4 different machines now and the same happens.
The objective is to be able to send the data from sqlexpress server to another by making a backup and without the need t stop the sql server. Any suggestion would be appreciated.
Adam
View 5 Replies
View Related
Feb 12, 2007
In SQL Server 2005, via the GUI, I wish to backup a database to an additional disk file (there is already an existing backup disk file for this database), so that I can have more than one backup. I've added the new disk file name, highlighted it, and clicked OK.
I get an immediate error (see below). Note, the 2nd error message is specifying the existing backup disk file, not the new one I'm attempting to create.
"Backup failed for Server 'WCS-DEV-TPA'. (Microsoft.SqlServer.Smo)"
"System.Data.SqlClient.SqlError: The volume on device 'D:Program FilesMicrosoft SQL ServerMSSQLBACKUPWCS_ADV_Longmont.bak' is not part of a multiple family media set. BACKUP WITH FORMAT can be used to form a new media set. (Microsoft.SqlServer.Smo)"
Does anyone know what causes this and how to correct it?
View 11 Replies
View Related
Jun 21, 2006
I am trying to save user data to a sql table but keep getting the following error;
Unable to cast object of type 'System.Boolean' to type 'System.Data.SqlClient.SqlParameter'.
I am using VWD Express Edition with .NET 2.0 and a SQL 2000 database. The code that generates the error is as follows;
Public Function chkUser(ByVal strUser As String) As Stringdim MyConnection As SqlConnectionDim MyCommand As SqlCommandDim ReturnString As StringDim params As SqlParameterDim SelectCmd As String = "wm_CheckUser"MyConnection = New SqlConnection(myConnectionString)MyCommand = New SqlCommand(SelectCmd, MyConnection)MyCommand.CommandType = CommandType.StoredProcedure
Tryparams = MyCommand.Parameters.Add("@parUser", SqlDbType.VarChar, 100).Value = strUserMyCommand.Connection.Open()MyCommand.ExecuteNonQuery()ReturnString = "Record Exists!"Catch Exp As SqlExceptionReturnString = ReturnError(Exp.Number, "Users", Exp.Message)End TryMyCommand.Connection.Close()Return ReturnString
End Function
Basically, I'm traying to check to see if a user id already exists in the database before saving the data the user entered. If the email address entered by the user is already in the database I want a message to be shown to the user. If the email address does not exist then the data entered by the user is saved and the form goes to step two (2) of the user registration process.
Any help with this would be greately appreciated. I can't seem to see what is wrong here. Please someone help.
Thanks,
Jaime
View 7 Replies
View Related
Feb 19, 2008
TITLE: Microsoft Visual Studio
------------------------------
Error at Data Flow Task [XML Source [55]]: There was an error setting up the mapping. The root element of a W3C XML Schema should be <schema> and its namespace should be 'http://www.w3.org/2001/XMLSchema'.
------------------------------
ADDITIONAL INFORMATION:
Pipeline component has returned HRESULT error code 0xC02090CF from a method call. (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------
BUTTONS:
OK
------------------------------
The error pasted above arose when I attempted to create a XML source based on a Crystal Reports XI report exported as XML. Is there any special modification to make to the XML exported from Crystal to allow SSIS to read it properly?
Thanks for your help,
Sid
View 1 Replies
View Related
Sep 13, 2006
I am running the following script to attempt a restore of a differential backup:
RESTORE DATABASE AdventureWorks
FROM DISK='C:SQL2005_BackupsAutoBackupsAdventureWorks.bak'
WITH
NORECOVERY
GO
RESTORE DATABASE AdventureWorks
FROM DISK='C:SQL2005_BackupsAutoBackupsAdventureWorksDiff.bak'
WITH RECOVERY
GO
I thought this was the way to do it. It does restore the full backup, but on the attempt to restore the differential backup, I get the following error:
Msg 3136, Level 16, State 1, Line 1
This differential backup cannot be restored because the database has not been restored to the correct earlier state.
Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
Does anyone know what this means? Do I have to use "with recovery" on the first restore? (The sample I took this from used "with norecovery")
The original backups were done with SQL Agent scheduled jobs. The script for the full backup is:
BACKUP DATABASE AdventureWorks
TO DISK='C:SQL2005_BackupsAutoBackupsAdventureWorks.bak'
The script for the differential backup is:
BACKUP DATABASE AdventureWorks
TO DISK='C:SQL2005_BackupsAutoBackupsAdventureWorksDiff.bak'
WITH DIFFERENTIAL, INIT
All I can say is, it's a good thing I am testing this out with non-critical data, because I obviously don't know what I am doing. (Sorry, I'm primarily a programmer, not a DBA) Can anyone help?
Thanks
View 4 Replies
View Related
Apr 17, 2008
Hi all!
I´m having some trouble with a SSIS package that I´ve been using five months or so now.
I have a package scheduled to run every 2 minutes to load data into my SQL Server instance
from our mobile computer systems. This data comes is read as flat file sources. My package runs 24/7.
My problem is that this package randomly returns "An error occurred while attempting to perform a type cast". This message is then returned during maybe 3 or 4 executions of the package. The error then vanishes into thin air, without me doing anything what so ever, and execution continues. The very same file that previously returned the errors is now processed without any problems.
I have no clue why this is, but I get the feeling that there has to be a reason for these random errors. To me, the type cast error seems to indicate problems with the data source (the flat file), but since the same file suddenly get processed without errors I have no clue where to start looking.
Anyone having the same issue?
Regards,
Daniel
View 2 Replies
View Related
Aug 28, 2006
I am attempting to run an SSIS package that, among other things, imports a spreadsheet from excel into a database table. The package runs without any issues within Visual Studio. I have tried executing the package through both, the MSDB run package and through dtexec (trying to kick of the package through a stored procedure) and I get 2 different behaviors.
Using dtexec (the method I really need to use): The package will run successfully...up to the point when the spreadsheet is imported at which time it fails with Description: The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. Here is the code:
exec xp_cmdshell 'dtexec /sq PopulateTRTLStationandtRTLUnitMapping /ser SERVERNAME
Running it through the MSDB Run Package UI...It will also make it up to the point where the Excel spreadsheet is imported but errors with: The Product level is insufficient for the component "Lookup Station and Account Type: (1894) ...and 1 line with that same error for every single task in that dataflow. Here is the code it runs.
/DTS "MSDBPopulateTRTLStationandtRTLUnitMapping" /SERVER "SERVERNAME" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING V
The machine is running 32 bit OS Windows Server 2003 SP1 and Db SQL Server 2005 32 bit. I found one forum posting that suggested turning the Delay Validation property to True...but that did not fix the issue. I did create the package with my username with a ProtectionLevel of EncryptSensitiveWithUserKey. I don't think it is related to the account however because all of the tasks (serveral work tables are created) up to the Excel import will execute.
I really need to get this working as soon as possible so am open to any solutions someone can present.
View 2 Replies
View Related
