SQL 2012 :: FCI Installation Volume Cluster Group Error
Dec 3, 2014
Issue when building a FCI where after the step of specifying what drives the data, logs, tempdb go, the installer errors with this message:
Exit message: The volume that contains SQL Server data directory D:SQL_DataMSSQL11.MSSQLSERVERMSSQLDATA does not belong to the cluster group.
We are running Windows Server 2012 R2 and SQL Server 2012 Enterprise with Veritas Storage Foundation for Windows 6.1. I've confirmed that the disk group exists and is mounted in Windows and presented as available storage. Symantec has an article detailing this same circumstance but the Microsoft KB article that they refer to only has hotfixes for Windows Server 2012, not R2.
Few questions on a SQL Server 2012 two node active/passive cluster installation on Win2012.
1. What are the permissions required for the user used to install SQL Server 2012 cluster. Does it need to have any rights on DC or anywhere else apart from the local nodes ?
2. Can we give ANY meaningful name to "SQL Server Network Name" during installation ? Do we need to manually configure it anywhere else before or after the installation ?
3. On what scenarios we need to check/uncheck DHCP check box ?
When adding a node to a SQL Server 2012 Standard edition cluster, how I do I identify the location for SQL server shared components and the rest of the SQL Server installation binaries?
When adding a node to a SQL Server 2012 Standard edition cluster all the binaries went to the C: drive default location. We put those files on a different drive when installing the first node. What needs to be done so both nodes have the binaries on the same drives and folders?
We're having a bizarre issue with installing our SQL 2012 cluster. On the stand-alone instances, we're able to choose Replication and Data Quality Services from the Database Engine Services without choosing Full-Tex and Semantic Extractions for Search. But when installing the cluster, it won't let us choose the other two without it. In fact, if we click on either Replication or Data Quality, it auto-checks ALL of the features.
My coworker discovered this problem and I was able to replicate it. We're using the SP1 install msi.
Why this is happening with a cluster install but not a stand-alone install?
My install appears to be hanging at the as_cluster_ip_address_cluster_config_Cpu64 part and I'm wondering if it's because it's trying to install Full Text.
I am installing SQL 2005 on a 2-node cluster running on Windows 2003 R2. When I try to install SQL 2005 on my cluster, I get an installation error. The error stops the installation while checking system configuration after installing prerequisites. The log file entry is as follows:
C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe Version: 2005.90.1399.0 Running: LoadResourcesAction at: 2007/9/12 16:6:42 Complete: LoadResourcesAction at: 2007/9/12 16:6:42, returned true Running: ParseBootstrapOptionsAction at: 2007/9/12 16:6:42 Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapxmlrw.dll Version:2.0.3604.0 Complete: ParseBootstrapOptionsAction at: 2007/9/12 16:6:42, returned true Running: ValidateWinNTAction at: 2007/9/12 16:6:42 Complete: ValidateWinNTAction at: 2007/9/12 16:6:42, returned true Running: ValidateMinOSAction at: 2007/9/12 16:6:42 Complete: ValidateMinOSAction at: 2007/9/12 16:6:42, returned true Running: PerformSCCAction at: 2007/9/12 16:6:42 Complete: PerformSCCAction at: 2007/9/12 16:6:42, returned true Running: ActivateLoggingAction at: 2007/9/12 16:6:42 Complete: ActivateLoggingAction at: 2007/9/12 16:6:42, returned true Running: DetectPatchedBootstrapAction at: 2007/9/12 16:6:42 Complete: DetectPatchedBootstrapAction at: 2007/9/12 16:6:42, returned true Action "LaunchPatchedBootstrapAction" will be skipped due to the following restrictions: Condition "EventCondition: __STP_LaunchPatchedBootstrap__3608" returned false. Action "BeginBootstrapLogicStage" will be skipped due to the following restrictions: Condition "Setup is running locally." returned true. Running: PerformDotNetCheck2 at: 2007/9/12 16:6:42 Complete: PerformDotNetCheck2 at: 2007/9/12 16:6:42, returned true Running: InvokeSqlSetupDllAction at: 2007/9/12 16:6:42 Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlspars.dll Version:2005.90.1399.0 <Func Name='DwLaunchMsiExec'> Examining 'sqlspars' globals to initialize 'SetupStateScope' Opening 'MachineConfigScope' for [OAKLRRDSDBA] Trying to find Product Code from command line or passed transform If possible, determine install id and type Trying to find Instance Name from command line. No Instance Name provided on the command line If possible, determine action Machine = OAKLRRDSDBA, Article = WMIServiceWin32OSWorking, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = WMIServiceWin32CompSystemWorking, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = WMIServiceWin32ProcessorWorking, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = WMIServiceReadRegWorking, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = WMIServiceWin32DirectoryWorking, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = WMIServiceCIMDataWorking, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = XMLDomDocument, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = Processor, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = PhysicalMemory, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = DiskFreeSpace, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = OSVersion, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = OSServicePack, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = OSType, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = iisDep, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = AdminShare, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = PendingReboot, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = PerfMon, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = IEVersion, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = DriveWriteAccess, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = COMPlus, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = ASPNETVersionRegistration, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = MDAC25Version, Result = 0 (0x0) ******************************************* Setup Consistency Check Report for Machine: OAKLRRDSDBA ******************************************* Article: WMI Service Requirement, Result: CheckPassed Article: MSXML Requirement, Result: CheckPassed Article: Operating System Minimum Level Requirement, Result: CheckPassed Article: Operating System Service Pack Level Requirement, Result: CheckPassed Article: SQL Compatibility With Operating System, Result: CheckPassed Article: Minimum Hardware Requirement, Result: CheckPassed Article: IIS Feature Requirement, Result: CheckPassed Article: Pending Reboot Requirement, Result: CheckPassed Article: Performance Monitor Counter Requirement, Result: CheckPassed Article: Default Installation Path Permission Requirement, Result: CheckPassed Article: Internet Explorer Requirement, Result: CheckPassed Article: Check COM+ Catalogue, Result: CheckPassed Article: ASP.Net Registration Requirement, Result: CheckPassed Article: Minimum MDAC Version Requirement, Result: CheckPassed <Func Name='PerformDetections'> 1 Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlsval.dll Version:2005.90.1399.0 Error: Action "InvokeSqlSetupDllAction" threw an exception during execution. Error information reported during run: Source File Name: datastorecachedpropertycollection.cpp Compiler Timestamp: Fri Jul 29 01:13:49 2005 Function Name: CachedPropertyCollection::findProperty Source Line Number: 130 ---------------------------------------------------------- Failed to find property "ComputerList" {"SqlComputers", "", ""} in cache Source File Name: datastoreclusterinfocollector.cpp Compiler Timestamp: Fri Sep 16 13:20:12 2005 Function Name: ClusterInfoCollector::collectClusterVSInfo Source Line Number: 883 ---------------------------------------------------------- Failed to detect VS info due to datastore exception. Source File Name: datastorecachedpropertycollection.cpp Compiler Timestamp: Fri Jul 29 01:13:49 2005 Function Name: CachedPropertyCollection::findProperty Source Line Number: 130 ---------------------------------------------------------- Failed to find property "InstallIds" {"MachineConfiguration", "", "OAKLRRDSDBB"} in cache Source File Name: datastoresqldiscoverycollector.cpp Compiler Timestamp: Fri Jul 29 01:13:50 2005 Function Name: SqlDiscoveryCollector::collectProperty Source Line Number: 132 ---------------------------------------------------------- Failed to open discovery on machine: OAKLRRDSDBB WinException : 2 Error Code: 0x80070002 (2) Windows Error Text: The system cannot find the file specified. Source File Name: datastoresqldiscoverycollector.cpp Compiler Timestamp: Fri Jul 29 01:13:50 2005 Function Name: SqlDiscoveryCollector::collectProperty Source Line Number: 132
I receive the below mentioned error message each time I try to install SP2 on SQL 2005 64 Bit Cluster: Using PrevRegRootPath: SoftwareMicrosoftMicrosoft SQL ServerMSSQL.2 GetServiceUserGroup failed for PLMCWSM01, 5 Error Code: 0x800706fd (1789) Windows Error Text: The trust relationship between this workstation and the primary domain failed. Source File Name: sqlcasqlcax.cpp Compiler Timestamp: Fri Feb 9 22:35:02 2007 Function Name: SetInstanceProperty Source Line Number: 1223
MSI (s) (78!08) [01:05:21:864]: Transforming table Error. MSI (s) (78!08) [01:05:21:989]: Transforming table Error.
MSI (s) (78!08) [01:05:21:989]: Note: 1: 2262 2: Error 3: -2147287038 MSI (s) (78!08) [01:05:21:989]: Product: Microsoft SQL Server 2005 (64-bit) -- Error 29528. The setup has encountered an unexpected error while Setting Internal Properties. The error is: Fatal error during installation. Error 29528. The setup has encountered an unexpected error while Setting Internal Properties. The error is: Fatal error during installation.
I am trying to install SQL 2005 in a 2-node Windows 2003 cluster. I have tried both upgrade and fresh installation, but got same error. The error stops the installation while checking system configuration after installing prerequisites. The log file entry is as follows:
I am installing SQL 2005 on a 2-node cluster running on Windows 2003 R1. When I try to install SQL 2005 on my cluster, I get an installation error. The error stops the installation while checking system configuration after installing prerequisites. The log file includes the following message
could not find file datastoresqldiscoverycollector.cppp Failed to start discovery on machince :Node2
This happens when I run the steup from Node1 .When I run the installation on Node I get the same error with the machine name as Node1 .
I tried Enabling Netbios over TCPIP for the heartbeat network however with no results
Can somebody please provide the next steps .A step by step approach will be greatly appreciated .
I am looking for information on using CSV storage for a windows 2012r2 Hyper-V cluster configuration.
The cluster will be used by SQL Server 2014.
Mainly, does it support filestream.I have not found much documentation for using Cluster shared volumes with SQL Server 2014.There was a session at Tech-Ed 2014 on the subject.
SQL Server 2014 is the first version to support CSV storage.
I have problem when installing SQL 2005 Enterprise to my Windows 2003 R2 cluster. I install the SQL instance on the first node in my cluster, it analyses the cluster and comes up with no errors or warnings, i answer all the installation questions and proceed with the installation. When installing the SQL engine I see the status changing as the instance is started and then stopped again etc, finally the status changes to "removing backup files" when it get an error that reports:
"The setup has encountered an unexpected error while Completing Commit. The error is: The specified module could not be found."
Unfortunately there isnt any more information to go on. Any help would be appreciated.
Due to a SQL 2014 cluster installation failure related to security while setting up the primary node, I had to remove the node and any related installation programs from the node and redo the installation again. However I am unable to use the machine name as the SQL network name during the instance configuration, I get the following:
Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: The SQL Server failover cluster instance name "MachineName" already exists as a server on the network. Specify a different failover cluster instance name.I am still getting the same name since the node name "MachineName" is listed under the cluster name. I have used machine name as SQL network name without an issue. I do not have any existing SQL machine name in network using same machinename which I want to use for this installation.
When the setup program tries to start the database service (the last step of installation), it indicates an error 29503.
The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually." The error is (17058)
During the installation of Adding node to a SQL Server failover cluster(On passive node) getting error like.. The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI server to start.We  run the below commands but didn’t get any resolution & got the same above error .  1<sup>st</sup> Method…
1. Open console command (Run->CMD with administrator privileges).Â
2. net stop winmgmtÂ
3. Rename folder %windir%System32WbemRepository to other one, for backup purposes (for example _Repository).Â
4. net start winmgmt
2<sup>nd</sup>Â Method..
1. Disable and stop the WMI service.
a) Command : - sc config winmgmt start= disabled
b. Command : - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â net stop winmgmt
We made SSIS package in dev environment in windows 2008R2 and SQL server 2012. Same packages were placed on SAN disks in cluster environment and are invoked with security contexxt of admin user and wih dtexec utility ( we call this using an sp). rarely but procedure completed i see the log text file by SSIS package and find the return code 5 means package is unable to load. i canst found what are the exact reasons for return code 5.
I'm trying to write a query to select various columns from 3 tables. In the where clause I use a set of conditions, but most important condition is that I only want to see all results from the different columns where the ph.ProdHeaderDossierCode contains at least 25 lines of processed hours. I tried this with group by and having, but I constant get error messages on all other columns that I want to see: "is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause". How can I make this so I can see all information I need?
we are currently trying to install SQL Server SP1 on a cluster. We do it according to the original MS document. Everything works fine until the last step, when the process tries to update files on the second node. This fails without giving a proper error message (it says on node 1
I noticed in installing a SQL2005 failover cluster instance,that it is not necessary to install on both servers. Installing on the primary node automagically installs to the secondary node. Does this constitute a COMPLETE install? It all seems to work. BUT this process does not intall client pieces (SSMS, for instance) on the secondary node. If you want that stuff there, do you then go to that box and just do a client install?
I have a problem with the sql 2005 installation in a W2003 R2 cluster. I launch the setup of one node, and I do all the steps of the installation without problems, the copy of data start well, the process request me about the second Cd .. and in this point of the setup ... appears an error. The message is something like :"Remote copy process failed". And the setup finish.
I am learning SQL Server failover cluster installation. My question is regarding the options to install failover cluster instances on the Windows Failover Cluster. I have seen ead there are two options to do so.
From the installation center, installation option-> New SQL Server installation option and afterwards add node to SQL Server failover instance.From Installation Center, Advanced option-> Failover cluster preparation and then Failover cluster completion step.What is the difference between these two options and which option to use in which scenario?
Does anyone experience an slow installation process of SQL 2005 on a MS Cluster enviroment ? I checked the scheduler on node2 and the status is running and no more information on the logs other than the starting time which it was 17 hours ago. Thanks in advance
From the MS cluster I'm able to see both node, do switching etc with not problem. When I install the SQL 2005 on node one and try to add server2 it is showing the server2 in the list of unavailable nodes with the status UNKNOWN. I went over the cluster and SQL installation step by step, but still not clue Any help is appreciate it
I receive this error message when I try and run my DTS package:
"Error opening datafile: The filename, directory name, or volume label syntax is incorrect."
I set the file name property of the Text File (Source) to a valid file, but when I run the package and it returns the above error message, it sets the file name property to <not displayable>.
Does anyone have any experience with such a problem? If so please help!!! Thanks
Do any one has a step by step instructions for installing the service pack 2 and 3 on Active/Passive cluster. I installed sqlserver 7.0 in one active/ passive cluster and it worked successfully. Now I followed the instructions as given by microsoft by running the cluster wizard. It removed the virtual server. I made all sqlservr services offline.
When I try installing I couldn't able to install as it is saying "Active virtual server is there run clustered wizard in all the nodes". Now I am in the middle of no where.
when i install sql server 2005 in cluster. I have error at Setup process screen --> the selected components are being configured.all the components are failed.I am using domain account with administrator account privilege on both server.OS : windows server 2008 on virtual machine..when i install sql server agent is enable to select during setup..
A few months ago, I was trying to install SQL Server 2005 SP2 on a cluster (Active-Active), the Cluster has 3 instances, 2 lives in one node and the other one in the other node. When I try to make the deployment an error message appear, I do not have the error right now but it€™s something like €œCould not connect to the passive node, installation failed€?. The worst part of the error was all instances shut down and I couldn€™t bring on line and I have to reinstall all instances. I need to install SP2 but I€™m a little afraid fail again. Do you know the best way to deploy the SP2 on a cluster? Maybe move all instances in one node before install SP2? Can you help me with your comments. Do you think I have problems with the windows cluster?
I am trying to install Sqlserver SP2 for 64bit with Microsoft Cluster. It failed with Database Services and Client services tool. I am running this installation from the Active Node only. Appreciate any help to fix this.
Following is the error I am seeing.
Product : Database Services (MSSQLSERVER) Product Version (Previous): 1399 Product Version (Final) : Status : NA Log File : Error Description : This installation must be run from the active node. You are running it from a passive node. To proceed, cancel the installation and run it again from the active node.
Product : Client Components Product Version (Previous): 1399 Product Version (Final) : Status : Failure Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQLTools9_Hotfix_KB921896_sqlrun_tools.msp.log Error Number : 29549 Error Description : MSP Error: 29549 Failed to install and configure assemblies c:Program Files (x86)Microsoft SQL Server90NotificationServices9.0.242Binmicrosoft.sqlserver.notificationservices.dll in the COM+ catalog. Error: -2146233087 Error message: Unknown error 0x80131501 Error description: The Transaction Manager is not available. (Exception from HRESULT: 0x8004D01B)
I'm having a fight with Reporting Services at the minute when trying to compute an average at the row group level for a value summed in a column group.I have the following column groups:
Year Month Date
And the following row groups:
Region Product SubType (hidden, data at the date level is summed to Product)
At the moment I'm computing the average for SubType for each Date at the Product level (giving a decimal value), so for each day I end up with a nice average, that works. However I am unable to average that average over the whole Year for a Product. The issue being that I'm trying to combine Row Groups (Product) and Column Groups (Date/Year)
select top 15 count(*) as cnt, state from table group by state order by cnt desc
[code[...
Can the above three queries be combined into one and still be fast, if so how?What i am trying to go is an item count, by group, similar to ones Inbox in Outlook.
