I have many new tables for which i need to write Insert,Update and delete triggers manually. Is there any way to generate triggers script which takes table name as a input parameter and print/generate trigger's script?
View 1 RepliesWhy are the user databases that were created in the MSSQLSERVER default instance showing up in the newly created ALPHAONE instance? I'm successfully logging into the alphaone database as it shows as "DASAlphaOne,1xxxPport) at the top of the treeview in ssms. I'm logging in as sa and can edit anything.
The issue here is that all the user databases are shown and can even be edited. I created this instance in an effort to hide databases from whoever is not supposed to see.I was expecting a clean instance with only the system databases..Is there something that can be set to keep each instance's databases private into itself?
I have a four tables called plandescription, plandetail and analysisdetail. The table plandescription has the columns DetailQuestionID which is the primary and identity column and a QuestionDescription column.
The table plandetail consists of the column PlanDetailID which the primary and identity column, DetailQuestionID which is the foreign key attribute of plandescription table and a planID column.
The third table analysisdetail consists of a analysisID which the primary and identity column, PlanDetailID which is the foreign key attribute of plandetail table and a scenario.
Below is the schema of the three tables
I have a two web form that will insert, update and delete data into these three tables in a two transaction. One web form will perform CRUD operations in plandescription and plandetail table. When the user inserts QuestionDescription and planid in this web form, I will insert the QuestionDescription Value in the plandescription table and will generate a DetailQuestionID value and this value is fed to the plandetail table with the planid. Here I will generate a PlanDetailID.
Once this transaction is done, I will show the second web form in which the user enters the scenario and this will be mapped with the plandescription using the PlanDetailID.
This schema cannot be changes as this is the client requirement. When I insert values I don’t have any problem. However when I update existing data, I need to delete existing PlanDetailID in the plandetail table and recreate PlanDetailID data for that DetailQuestionID and planID. This is because, the user will be adding or deleting a planID associated with the QuestionDescription.
Once I recreate PlanDetailID for that DetailQuestionID and planID, I need to update the old PlanDetailID with the new PlanDetailID in the third table analysisdetail for the associated analysisID.
I created a #Temp table called #DetailTable to insert the values analysisID, planid and old PlanDetailID and new PlanDetailID so that I can have them in update statement once I delete the data from plandetail table for that PlanDetailID.
Then I deleted the plandetailid from the plandetail table and recreate PlanDetailID for that DetailQuestionID. During my recreation I fetched the new PlanDetailID’s created into another temp table called #InsertedRows
After this I am running a while loop to update the temp table #DetailTable with the newly created PlanDetailID for the appropriate planID’s. The problem is here. When I have the same number of planID’s for example 2 planID’s 1,2 I will have only two old PlanDetailID and new PlanDetailID for that planID and analysisID.But When I add a new PlanID or remove a existing planID I am getting null value for that newly added or deleted planID. This is affecting my update statement of analysisdetail table as PlanDetailID cannot be null.
I tried to remove the Null value from the #DetailTable by running the update statement of analysis detail in a while loop however its not working.
DECLARE @categoryid INT = 8
DECLARE @DetailQuestionID INT = 1380
/*------- I need the query to run for the below three data.
Here i'm updating my planids that already exists in my database*/
DECLARE @planids VARCHAR(MAX) = '2,4,5'
[code].....
hello, i have a problem in my sql. im using a stored procedure and i want to get the newly created id number to be used to insert in the other table.it works like:insert into table() values()select @id = (newly created id number) from tableinsert into table1() values(@id) something like that.
View 2 Replies View RelatedI am trying to execute three dts packages from a Job that I created. When creating the steps I am setting the Type To: Operating System Command(CmdExec).
The Command I am using is: dtsrun /S servername /E /dtsPackageName
For some reason whenever I try to run thes jobs it fails. Within this Job I have three steps. For each step I am using the same job but with a different package name. I have a trusted connection so my command should work just fine. What am I doing wrong. Can some please explain this process.
Thanks
I am trying to create a simple query like this -
SELECT
Column_1,
Column_2,
Column_3,
10*Column_1 AS Column_4,
10*Column_2 AS Column_5,
-- I am not being able to understand how to do this particular step Column_1*Column_5 As Column_6
FROM Table_1
First 3 Columns are available within the Original Table_1
The Column_4 and Column_5 have been created by me, by doing some Calculations related to the original columns.
Now, when I try to do FURTHER CALCULATION on these newly created columns, then SQL Server does not allows that.
I was hoping that I will be able to use the Newly Created Columns 4 and 5 within this same query to do further more calculations, but that does not seems to be the case, or am I doing something wrong here ?
If I have to create a new column by the name of Column_6, which is actually a multiplication of Original Column_1 and Newly Created Column_5 "I tried this - Column_1*Column_5 As Column_6", then what is the possible solution for me ?
I have tried to present my problem in the simplest possible manner. The actual query has many original columns from Table_1 and many Calculated columns that are created by me.And now I have to do various calculations that involve making use of both these type of columns.
Hi
I had DTS the Northwind sample database from SqlServer 2000 to 2005. It's went ok and no errors. Then, I created a SP named upGetCustomer, bascially it queries the Customers table and list some of it's fields and order by CustomerId,CustomerName, Country decrementally. SP is so simple and has no errors.
Then, I created a SqlServer project in VS2005 using C#. Add store procedure class as below,
using System;
using System.Data;
using System.Data.SqlClient;
using System.Data.SqlTypes;
using Microsoft.SqlServer.Server;
public partial class StoredProcedures
{
[Microsoft.SqlServer.Server.SqlProcedure]
public static void Customers(string customerid)
{
using (SqlConnection sqlConn =
new SqlConnection("context connection=true"))
{
sqlConn.Open();
SqlPipe sqlPipe = SqlContext.Pipe;
SqlParameter param = new SqlParameter("@custId", SqlDbType.VarChar, 5);
param.Value = customerid;
SqlCommand sqlCmd = new SqlCommand();
sqlCmd.CommandType = CommandType.StoredProcedure;
sqlCmd.CommandText = "upGetCustomer";
sqlCmd.Parameters.Add(param);
SqlDataReader rdr = sqlCmd.ExecuteReader();
SqlContext.Pipe.Send(rdr);
}
}
I had taken method of created SQLCLR from source in Microsoft website, but coding is mine, and hopes it is correct. I used SqlConnection string as 'context connection=true' which I still not quite sure what does it means, hopes it mean current connection I am using on my Windows authentication.
The project did compiled & deployed OK on the VS2005 side.
The problem is that when I tried to locate the assembly on the Sql Server 2005, but can't find it anywhere on Sql Server.
I did try complied and deloyed again, it keeps saying there is an error in deployment as customers assembly is already exist on the database. I then, tried to remove this assembly on the database using SQL script, drop assembly customers in the Northwind database but got error saying it does not exist. So where is it???
Please help...
Thank you
I am trying to create a simple query like this -
SELECT
Column_1,
Column_2,
Column_3,
10*Column_1 AS Column_4,
10*Column_2 AS Column_5,
-- I am not being able to understand how to do this particular step Column_1*Column_5 As Column_6
FROM Table_1
First 3 Columns are available within the Original Table_1
The Column_4 and Column_5 have been created by me, by doing some Calculations related to the original columns.
Now, when I try to do FURTHER CALCULATION on these newly created columns, then SQL Server does not allows that.
I was hoping that I will be able to use the Newly Created Columns 4 and 5 within this same query to do further more calculations, but that does not seems to be the case?
If I have to create a new column by the name of Column_6, which is actually a multiplication of Original Column_1 and Newly Created Column_5 "I tried this - Column_1*Column_5 As Column_6", then what is the possible solution?
I have tried to present my problem in the simplest possible manner. The actual query has many original columns from Table_1 and many Calculated columns that are created by me. And now I have to do various calculations that involve making use of both these type of columns.
I have a table that I have created a table and desire to do some basic math by adding a few new columns. The problem is that i cant get this to work without create many new select statements. The new columns that I wish to add refer to other newly created columns. Is there a way I can do this with CTW or subqueries? Unless it is a best practice to chain out the logic for the newly created columns
I have an example from AdventureWorksDW since the data is very accessible. I can safely create EMP_TENURE and PTO_REMAINING is this select statement. I would then need to create a new select statement to define 'BONUS' and then another select statement to define 'NEW_COL1' and so on.
Im still pretty new at SQL and am trying to learn how to complete such a task using subqueries or CTE.
SELECT
NAME = [LastName] + ',' + [FirstName]
,HireDate
,Title
,DepartmentName
,BaseRate
,VacationHours
,SickLeaveHours
[Code] ....
I created a database called sports and then created a table which I'm going to use as a template for other tables within the same database.
What is the proper way to structure and implement copying this template table?
Should I store the template table under the system tables folder?
How do I copy the template table and create a new table from this template?
Thanks you
Goldmember
Hi!
I have a piece of code that connects to the master database and uses the simple 'CREATE DATABASE MYDATABASE' statement to create a new database on an sql server 2005 express instance.
I then close that connection and try to open a new connection using my newly created database. I use integrated authentication in both cases. However, I get the following error: Cannot open database "MYDATABASE" requested by the login. The login failed.Login failed for user 'DOMAINNAMEusername'.System.Data.SqlClient.SqlException: Cannot open database "MYDATABASE" requested by the login. The login failed.
I don't get this error all the time. I tried to run my code many times and it some times work. But in some cases it doesn't. The database is always created but some times I cannot connect to it. But again, if I wait a little and try again with the same database, the connection is made.
I know that my connections are opened and closed normally and they don't remain open. So I don't believe I reach the maximum number of available connections.
I also sometimes get this exception : A connection was successfully established with the server, but then an
error occurred during the login process. (provider: Shared Memory
Provider, error: 0 - No process is on the other end of the pipe.
Any clue?
I created a new database in SQL Server 2000, using the command
"CREATE DATABASE ContactManager ON PRIMARY(NAME = ContactManager,FILENAME ='C:Program FilesMicrosoft SQL ServerMSSQLDataContactManager.mdf',SIZE = 5MB,MAXSIZE = 20MB,FILEGROWTH = 5MB)LOG ON(NAME = ContactManager,FILENAME = 'C:Program FilesMicrosoft SQL ServerMSSQLDataContactManager.ldf',SIZE = 2MB,MAXSIZE = 10MB,FILEGROWTH = 2MB)Go"
Databse was successfully created and I created two tables also in it. Now when i try to create a new connection in Visual Web Developer 2005, I get the error message :
"Directory lookup for the file "C:Program FilesMicrosoft SQL ServerMSSQLDataContactManager.mdf" failed with the operating system error 5 (Acess is denied.).
Cannot attatch the file "C:Program FilesMicrosoft SQL ServerMSSQLDataContactManager.mdf" as 'ContactManager'."
What else do I need to do use the database?
We've been running a mirrored database (using certificates since we don't have a domain) and it's all working well. Last week we decided to add a witness for automatic failovers, but for some reason I just can not get the witness to connect to the Partner2 server.
See screenshot here
Please help me troubleshoot this - I re-created the endpoints / users / certificates but it's still not working. Where can I get more information on what exactly the problem is? Can I test the endpoints somehow?
Hello dear Forum,
I guess this should be rather simple to answer but i just don't get how to do this. I just want to import some data from an Access mdb file into a SQL Server 2005 Database.
As I dont want to create all tables in Sql Server 2005 beforehand i'd like to create them out of my SSIS Package. Therefore i use the 'Execute SQL Task' in the control flow before stepping into the dataflow where only a oledb-source and an oledb-destination exist...
VERY simple... My problem is, that i can't select the table from the selectionlist in the oledb-destination because it does not exist before executing the package...
If i create the table by hand just to be able to select it, that does not help. because if everything is set up and then i delete the table (because it will be created by the package anyway) an error occurs before executing the package - in the validation phase:
Package Validation Error: "Invalid object name 'myToBeCreatedTable'".
Can't i create tables on the fly which i use then in my dataflow tasks?
Kind regards,
Wolfgang
Hello dear Forum,
I guess this should be rather simple to answer but i just don't get how to do this. I just want to import some data from an Access mdb file into a SQL Server 2005 Database.
As I dont want to create all tables in Sql Server 2005 beforehand i'd like to create them out of my SSIS Package. Therefore i use the 'Execute SQL Task' in the control flow before stepping into the dataflow where only a oledb-source and an oledb-destination exist...
VERY simple... My problem is, that i can't select the table from the selectionlist in the oledb-destination because it does not exist before executing the package...
If i create the table by hand just to be able to select it, that does not help. because if everything is set up and then i delete the table (because it will be created by the package anyway) an error occurs before executing the package - in the validation phase:
Package Validation Error: "Invalid object name 'myToBeCreatedTable'".
Can't i create tables on the fly which i use then in my dataflow tasks?
Kind regards,
Wolfgang
Hello dear Forum,
I guess this should be rather simple to answer but i just don't get how to do this. I just want to import some data from an Access mdb file into a SQL Server 2005 Database.
As I dont want to create all tables in Sql Server 2005 beforehand i'd like to create them out of my SSIS Package. Therefore i use the 'Execute SQL Task' in the control flow before stepping into the dataflow where only a oledb-source and an oledb-destination exist...
VERY simple... My problem is, that i can't select the table from the selectionlist in the oledb-destination because it does not exist before executing the package...
If i create the table by hand just to be able to select it, that does not help. because if everything is set up and then i delete the table (because it will be created by the package anyway) an error occurs before executing the package - in the validation phase:
Package Validation Error: "Invalid object name 'myToBeCreatedTable'".
Can't i create tables on the fly which i use then in my dataflow tasks?
Kind regards,
Wolfgang
I am new to SQL Programming. I am learning the basics. I am trying to create a simple query like this -
SELECT
Column_1,
Column_2,
Column_3,
10*Column_1 AS Column_4,
10*Column_2 AS Column_5,
-- I am not being able to understand how to do this particular step Column_1*Column_5 As Column_6
FROM Table_1
First 3 Columns are available within the Original Table_1
The Column_4 and Column_5 have been created by me, by doing some Calculations related to the original columns.
Now, when I try to do FURTHER CALCULATION on these newly created columns, then SQL Server does not allows that.
I was hoping that I will be able to use the Newly Created Columns 4 and 5 within this same query to do further more calculations, but that does not seems to be the case, or am I doing something wrong here ?
If I have to create a new column by the name of Column_6, which is actually a multiplication of Original Column_1 and Newly Created Column_5 "I tried this - Column_1*Column_5 As Column_6", then what is the possible solution for me ?
I have tried to present my problem in the simplest possible manner. The actual query has many original columns from Table_1 and many Calculated columns that are created by me. And now I have to do various calculations that involve making use of both these type of columns.
I run a query
select col1, col2, col3, col4
from Table
where col2=5
order by col1
I have a primary key on the column.The execution plan showing the clustered index scan cost 30% & sort cost 70%..When I run the query I got missing index hint on col2 with 95% impact.So I created the non clustered index on col2.The total executed time decreased by around 80ms but I didn't see any Index name that is using in the execution plan.After creating the index also I am seeing same execution plan
The execution plan showing the clustered index scan cost 30% & sort cost 70% but I can see the total time is reducing & Logical reads on that table is reducing.I am sure that index is useful but why there is no change in the execution plan?
I am getting ready to start a project where I am charged with moving out old data from production into a newly created historical DB. We have about 8 tables that are internal audit tables, that are big and full of old data. These tables are barely used and are taking up way too much space and time for maintenance.
I would like to create a way (SSIS?) to look at the date field in each of the 8 tables and copy out anything older than two years into my newly created history DB. Then deleting the older records from the source DB.
I don't know if SSIS is the best method to use. If it is, what containers to use to move over data, then how to do delete from source?
Can I do the mass deletes on my audit source tables without impacting performance/indexes/fragmentation?
I'm in the process of migrating over nearly 900 reports to a replicated server.
I have moved over 100 reports, stored procedures and their dependent objects so far.
I have two tables that are not being applied to the subscriber.
I have created one table and one stored procedure for to insert/delete/update the data in that table.
So,I was trying to move the scripts from one database to another by Generating Scripts options in SQL Server.
Generating Scripts:
Object Explorer --> Databases --> Database --> Tasks --> Generate Scripts
The generated script output is in a order of stored procedure first and then table.
REQUIREMENT: My stored procedure is dependent on table. So, I need the table script first and then stored procedure.
Note: I can generate two separate scripts for table and stored procedure, But in a just curiosity to know, Is there any way, can we re order the Generate Scripts output in SQL Server.
Is there a way in SQL server that can generate stored procedures for select, insert, update, delete on certain tables?
View 4 Replies View RelatedI am setting up SQL audit on sql servers in my environment based on requirement. I want to create database specifications ASAP database created. I tried DDL trigger but Audit doesn't support triggers. So I created audit specifications on model database. the only problem with this is every specification created on new database with same name.database specification name includes newly created database name or other methods to create database specifications on newly created databases.
View 6 Replies View RelatedHow can i assign permissions to a newly created users as of an existing user?
View 3 Replies View Relatedtrying to get a new database created then running a script to created the tables, relationships, indexes and insert default data. All this I'm making happen during the installation of my Windows application. I'm installing SQL 2012 Express as a prerequisite of my application and then opening a connection to that installed SQL Server using Windows Authentication.
E.g.: Data Source=ComputerNameSQLEXPRESS;Initial Catalog=master;Integrated Security=SSPI; Then I run a query from my code to create the database eg: "CREATE DATABASE [MyDatabaseName]".
From this point I run a script using a Batch file containing "SQLCMD....... Myscriptname.sql". In my script I have my tables being created using "Use [MyDatabaseName] Go CREATE TABLE [dbo].[MyTableName] .....". So question is, should I have [dbo]. as part of my Create Table T-SQL commands? Can I remove "[dbo]."? Who would be the owner of the database? If I can remove the [dbo]., should I also remove dbo. from any query string from within my code?
I'm having an issue accessing a newly installed SSRS instance. When I browse to the URL it states that "User 'BLAH' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed.".
I've gone through various forum posts and followed steps such as running IE as an admin and disabling UAC but I'm unable to get past this unless I run IE as an admin.
Hi folks.
Here i have small problem in transactions.I don't know how it is happaning.
Up to my knowldge if you start a transaction in side the transaction if you have DML statements
Those statements only will be effected by rollback or commit but in MS SQL SERVER 7.0 and 6.5
It is rolling back all the commands including DDL witch it shouldn't please let me know on that
If any one can help this please tell me ...........Please............
For Example
begin transaction t1
create table t1
drop table t2
then execute bellow statements
select * from t1
this query gives you table with out data
select * from t2
you will recieve an error that there is no object
but if you rollback
T1 willn't be there in the database
droped table t2 will come back please explain how it can happand.....................
Email Address:
myself@ramkistuff.8m.com
Is there any method to get the T-SQL command/ statement using DML triggers?.
i.e. While we insert a record using INSERT Statement, is there any possible way to get the T-SQL Statement using DML trigger for AFTER INSERT.
I have a website I'm ready to test on the server it will call home. I just got connected to the remote SQL server that it will be using. As I've been creating the site, I've been using the default SQL Express set-up in Visual Studio. Is there a way to have Visual Studio create all those default tables, procedures, etc. OR is there a way to copy all of that stuff from the SQL Express running on my machine to the remote SQL Server 2005?
-Mathminded
This procedure runs and I see my GM names come up one at a time but I get no tables created.
Sorry about the sloppy code - I'm not a real pro.
declare @@GM Char(100)
declare @SQL VarChar (2000)
Declare spot cursor scroll for
select GM from BIM_Historical_Performance.dbo.Performance_Master
open spot
fetch first from spot
into @@GM
While @@Fetch_Status =0
BEGIN
set @SQL = 'select Comp, Billto, Cust_name as Customer, Branch, BAC, [MgMt_Type], BondValue as Bondbucks , BondValueAlloc as Allocbucks, c1 as Curcode, u1 as CurUnderP$, s1 as Cur3mthBIMsales, p1 as performance, I1 as Inside, [IS_since] as Insidesince, O1 as Outside, [OS_since] as Outsidesince, c2 as CodeM-1, c3 as CodeM-2, c4 as CodeM-3, c5 as CodeM-4 ,c6 as CodeM-5, GM into ' +@@GM + ' from BIM_Historical_Performance.dbo.Performance_Master where BIM_Historical_Performance.dbo.Performance_Master.gm = ' +@@GM
EXEC (@Sql)
Fetch NExt from spot
End
I want to know who had created the new tables,How can I achieve it?
Can I know it by using the sysobjects table?
Hi everyone.. I have a big problem.. :p
I have created a installer for my application and database.
When I run the installer it only creates the database but no tables created. But in some other workstation it works fine. I dont know what causes this problem....
Please guide me.
RON
________________________________________________________________________________________________
"I won't last a day without SQL"
Can Query Analyzer deal with this or not???
Select FirstName into FirstNameTable From NameTable
Select Count(*) from FirstNameTable
Fails with FirstNameTable as invalid object.
TIA
I'm trying to list everything (tables, view, procedures, functions, etc.) that was created by users in a database.
The query which seems to eliminate the most SQL system type objects is shown below.
SELECT *
FROM sys.all_objects SAO
WHERE SAO.is_ms_shipped = 0
order by SAO.type, SAO.name
This still includes some non-user created objects, like the below. See the attachment for details.
fn_diagramobjects
sp_alterdiagram
sp_creatediagram
How can I get rid of these type of objects without filtering on SAO.name LIKE...