SQL 2012 :: Get Column Name Within SSIS When Error Is Encountered
Aug 21, 2015
I have a dtsx import script which import a delimeted csv file into a sql 2012 table. The default of the output length for all columns is set to 50 characters.All records which do not comply goes to another table in the same database. When I ran the script,all the records goes to the error table. I have now found a way to retrieve the column id and the error message to find that some column are been truncated and do not import.
I now need to know which column is given the error. The import file have more than 300 columns and I do not want to go and check each column length.I am using visual studio 2010 and using visual basic. I have found a sample of C+,but the screen shots is very small and when I type in the command,i do not compile.
We have over 400 import scripts and I could really use this in all of them to trouble shoot.
View 5 Replies
ADVERTISEMENT
Dec 11, 2006
I installed SQL Server 2005 Integration services on Windows XP machine. Then I went to the SQL Server Configuration Manager and tried to Start the SSIS service. The "Log On As" value is "NT AUTHORITYNetworkService". But I get the follwoing error:
The request failed or the service did not respond in a timely fashion. COnsult the event log or other applicable error logs for details.
Event Log details:
------------------
The SQL Server Integration Services service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
I tried running the service using the "Local Service" and the "Local System" accounts also, but am still encountering the same error. What do I do...
View 2 Replies
View Related
May 23, 2007
We are using sql server 2005 Enterprise Edition with service pack1
I got the following error messages in the SQL log
The operating system returned error 21(The device is not ready.) to SQL Server during a read at offset 0x00000000090000 in file '....mdf'. Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
fcb::close-flush: Operating system error 21(The device is not ready.) encountered.
I got these errors for about 2 hrs and after that I see these messages in the sql log
Starting up database ' '
1 transactions rolled forward in database '' (). This is an informational message only. No user action is required.
0 transactions rolled back in database ' ' (). This is an informational message only. No user action is required.
Recovery is writing a checkpoint in database ' ' ( ). This is an informational message only. No user action is required.
CHECKDB for database '' finished without errors on (local time). This is an informational message only; no user action is required.
Can anyone please help me in troubleshooting this issue. Why this migh have happened.
any help would be appreciated.
Thanks
View 5 Replies
View Related
Jun 20, 2007
Hi there
I have recently installed a new server for a client running SBS2003 R2 with SQLServer 2005.
I noted that the backup failed the SQL Server database on the consistenty check. On checking the event log I see this message as per above.
It reads in the description
c:datalawsqldatadata41_Data.MDF:MSSQL_DBCC6:
Operating system error 112(error not found) encountered.
Looking in the error log I see :
Configuration option 'user options' changed from 0 to 0. Run the RECONFIGURE statement to install.
Error: 17053, Severity: 16, State: 1.
C:DataLAWsqldatadata41_Data.MDF:MSSQL_DBCC6: Operating system error 112(error not found) encountered.
DBCC CHECKDB (data41) WITH no_infomsgs executed by NT AUTHORITYSYSTEM found 0 errors and repaired 0 errors. Elapsed time: 0 hours 0 minutes 26 seconds.
This is a new server with about 90% of disk space NTFS still available
Any idea's thanks.
View 5 Replies
View Related
Mar 22, 2006
HI ,
This is a problem I encountered when I had to detach a database file (type .mdf):
1) I went to the MS SQL Management Server Studi and detached my database file successfully from a connection called Workhorse.
2) I needed to place the .mdf database file into a zip file in order to put it on a remote server. I did this using Shared Portal. This was also successful
3) However when I tried reattaching the database file, I got this error:
CREATE FILE encountered operating system error 5A(Access denied.) while attempting to open or create the physical file "CProgram FilesMSSQL ServerMSSQLData<databasename>.mdf'
Q) The database file and log file (ldf) exist in the correct directory so I don't know what happened. Can any one help?
Thanks much
Tonante
View 42 Replies
View Related
Jun 17, 2006
Good day good people of the forum while carrying out a remote installation i encountered an UNC path error can anyone be of help giving me a comprehensive answer to the problem. am stuck i cant move ahead from that part of the installation
View 1 Replies
View Related
Oct 31, 2013
I have one table with columns patientName , Nurse,ArrivalDate, DepartDate . It has all the patiet information for all the Nurses.
I am calculating Average Number of patients per day per nurse by using below query
SELECT Nurse,
COUNT(DISTINCT patientName) AS NoOfPatients,
COUNT(DISTINCT patientName) * 1.0/COUNT(DISTINCT ArrivalDate) AS [AvgNo.ofpatientsPerDay]
FROM Table t
GROUP BY NURSE
but if ArrivalDate is Null I am getting below error saying that Divide by zero error encountered.
View 5 Replies
View Related
Dec 3, 2007
How can i handle this kind of error in my execution of my storedprocedure? Error:Divide by zero error encountered.
thanks!
Funnyfrog
View 3 Replies
View Related
Nov 28, 2006
Hi,
I get the following error while trying to execute a UDF.
Msg 6522, Level 16, State 1, Line 1
A .NET Framework error occurred during execution of user defined routine or aggregate 'test':
System.NullReferenceException: Object reference not set to an instance of an object.
System.NullReferenceException:
at SalesCentral_Database.UserDefinedFunctions.udfTest()
My function is defined as follows:
Imports System
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlTypes
Imports Microsoft.SqlServer.Server
Partial Public Class UserDefinedFunctions
<Microsoft.SqlServer.Server.SqlFunction(DataAccess:=DataAccessKind.Read)> _
Public Shared Function udfTest() As SqlString
SqlContext.Pipe.Send(System.DateTime.Now().ToString())
Dim conn As New SqlConnection("context connection=true")
conn.Open()
Dim cmd As New SqlCommand("SELECT MAX(ACCTPERIOD) FROM TBL_OPPORTUNITY_HIS", conn)
Return New SqlString(cmd.ExecuteScalar().ToString())
End Function
End Class
SQL Server
CREATE ASSEMBLY SalesCentral_Database from '\isew5l6c ranfSFS_SalesSalesCentral_Database.dll' WITH PERMISSION_SET = SAFE
CREATE FUNCTION test() RETURNS NVARCHAR(10) AS EXTERNAL NAME [SalesCentral_Database].[SalesCentral_Database.UserDefinedFunctions].[udfTest]
SELECT dbo.test()
- Here I get the error mentioned above. Can anyone please tell me what am I missing.
Thanks.
View 3 Replies
View Related
Jul 16, 2014
I am new to SSIS and i got 1 assignment.
Requirement:
In my destination table i am having some 30 columns and the CSV files what i get may have 10 columns or 20. How do I map columns between source and destination dynamically?
View 3 Replies
View Related
Nov 19, 2014
How would one add this as a derived column
CASE
WHEN Data IS NULL
THEN NULL
WHEN SUBSTRING(REPLICATE('0', 9 - LEN(Data)) + CAST(CYCLE_YYYYMM AS VARCHAR(9)), 4, 6) IS NULL
THEN 0
ELSE RTRIM(SUBSTRING(REPLICATE('0', 9 - LEN(Data)) + CAST(Data AS VARCHAR(9)), 4, 6))
END
From what I have seen the first option is not really required
View 1 Replies
View Related
Oct 10, 2006
we now used synonyms on the version 6 of our peoject, at first it turns out good. Then we migrate a database to the new database, everythings fine, its just a data migration anyway. The target database' structure and DML's wasn't change during migration. then intermittendly, we're encountering "A severe error occurred on the current command. The results, if any, should be discarded". I said its intermittent because sometime its ok, mostly its not functioning.
This is very painfull because all our scripts has this synonym. All our scripts uses an sp execution logging stored procedured of another database so we created a synonym for those sp's instead of fully qualifying the procedure name.
This is a major issue for us, please advise. You may response here, send me email or email me. Many Thanks.
Rodel E. Dagumampan
Email: dehranph@gmail.com
Yahoo: dehranph
Blog: http://community.devpinoy.org/blogs/dehranph
View 7 Replies
View Related
Jun 18, 2015
My Code is
SELECT Client,State,
CASE WHEN Weight>=11 and Weight<=455 and Height>=110 and Height<=250
THEN isnull((cast(nullif(Weight,0)/power((NullIf(Weight,0)/100),2) as int)),0) else -1 end as BaseBMIScore
FROM Test100
And I got following error:
Msg 8134, Level 16, State 1, Line 1
Divide by zero error encountered.
View 4 Replies
View Related
Jan 7, 2004
Hey all,
When i exec an sp it runs a sum, sometimes it is possible that there is a 0 value, it then returns an error Divide by zero error encountered
How can i work around this error
My sp code is
CREATE proc CP_avgloss_rings
@mID varchar(10),
@startdate datetime,
@enddate datetime
as
select ((sum(vtp)-(sum(moneyout)))/100) / ((sum(playtime))/ 3600) as avgloss
from dbo.rings
where
machineID = @mID
and convert(varchar,njdate,121)
between convert(varchar,@startdate,121)
and convert(varchar,@enddate,121)
GO
Maybe someone can help me
Cheers Wimmo
View 4 Replies
View Related
Mar 19, 2015
I'm getting this error:
Divide by zero error encountered.
Warning: Null value is eliminated by an aggregate or other SET operation.
this is where i'm getting the error:
CASE WHEN Claims.ClaimTotal > 0 then (ISNULL(Claims.ClaimTotal,0) / ISNULL(TotalPrem.TotalPrem,dbo.TrnPolicy.TotalDue)) else 0 END AS LossRatio
View 3 Replies
View Related
Jun 22, 2006
Good day good people of the forum thanks for the response this is the error message i encountered "an error occured while attempting to validate the setup source files unc path. verify that you have entered a valid unc path."
View 1 Replies
View Related
Dec 12, 2013
I have a data flow task in which I have a ADO NET source and OLE DB Destination. I have in the ADO NET source a sql command which pulls all the columns in a table. My requirement is to ignore a particular column,say column99. I opened advanced editor and deleted the mapping between the external and output columns for column99. I had also set the Error and Truncation to "Ignore Failure" for column99. I had also mapped the destination column to <Ignore> in OLD DB destination.
But this still throws the error-
Description: The ADO NET Source was unable to process the data. Field table-column99 missing an escape character for a quote.Unable to update PK WHERE clause.Error processing data batch.
How do I solve this?
View 9 Replies
View Related
Aug 4, 2007
OLEDB error encountered calling ICommandText:: execute ; hr = 0x80040e14 .
SQLSTATE : 42000 , Native Error : 3013
Error state 1 , Severity : 16
Source : Microsoft OLE DB Provider for SQL Server
Error Message : Backup Database is terminating abnormally
View 1 Replies
View Related
Oct 2, 2006
I export data from a dozen tables of one database to another database on another server regularly and it works well. However, if i choose the option of "save SSIS package", I get the following error:
TITLE: SQL Server Import and Export Wizard
------------------------------
The operation could not be completed.
------------------------------
ADDITIONAL INFORMATION:
The ExistsOnSQLServer method has encountered OLE DB error code 0x80004005 (Client unable to establish connection). The SQL statement issued has failed.
------------------------------
BUTTONS:
OK
------------------------------
I use management studio to do this, but the servers are 2000.
Does anyone have any clue about this?
View 3 Replies
View Related
Nov 26, 2006
I am trying to deploy my mobile app to treo 700wx, but when i test the app, the application gives me an error message:
sql mobile encountered problems when opening the database
It happens when I sync data.
However, when I sync data users and customer info, it doesn't give this message, But when I sync (third time) order info, this message comes out.
--when i run on my PPC (HP ra1950), there is no this error message.
I think it is a bug?
BTW, which cabs file should I install on the Treo phone? (.Net ce, sql ce mobile30 ???)
Please help me out. Thanks
James
View 3 Replies
View Related
Dec 20, 2005
I encountered an error when attempting to install Visual Basic Express Edition RTM. During the setup, I selected MSDN Express Edition and SQL Server 2005 Express Edition. Specifically, the SQL Server 2005 EE part of the installation failed. Here's the error I received:
Visual Basic 2005 Express Edition Setup
Error occurred during setup
Visual Basic 2005 Express Edition has been successfully installed.
The following component failed to install:
Microsoft SQL Server 2005 Express Edition x86
I had not installed any betas on this particular PC; however, I had already installed Visual Studio 2005 Pro and SQL Server 2005 Developer Edition.
(I selected SQL Server EE during the VBEE install because the VBEE readme said that the VSEE Editions (except for VWD) only work with SQL Server EE--so I figured I had to install SQL Server EE if I wanted to do any database work with VBEE. Is that the case?)
The following two log files were the only ones containing any error messages. How should I proceed?
C:Program Filesmicrosoft sql server90setup bootstraplogfilesSQLSetup0003_US05046_Core.log:
Microsoft SQL Server 2005 Setup beginning at Mon Dec 19 14:40:32 2005
Process ID : 5824
c:211395ac6e4ed715363fsetup.exe Version: 2005.90.1399.0
Running: LoadResourcesAction at: 2005/11/19 14:40:31
Complete: LoadResourcesAction at: 2005/11/19 14:40:31, returned true
Running: ParseBootstrapOptionsAction at: 2005/11/19 14:40:31
Loaded DLL:c:211395ac6e4ed715363fxmlrw.dll Version:2.0.3604.0
Complete: ParseBootstrapOptionsAction at: 2005/11/19 14:40:32, returned true
Running: ValidateWinNTAction at: 2005/11/19 14:40:32
Complete: ValidateWinNTAction at: 2005/11/19 14:40:32, returned true
Running: ValidateMinOSAction at: 2005/11/19 14:40:32
Complete: ValidateMinOSAction at: 2005/11/19 14:40:32, returned true
Running: PerformSCCAction at: 2005/11/19 14:40:32
Complete: PerformSCCAction at: 2005/11/19 14:40:32, returned true
Running: ActivateLoggingAction at: 2005/11/19 14:40:32
Complete: ActivateLoggingAction at: 2005/11/19 14:40:32, returned true
Running: DetectPatchedBootstrapAction at: 2005/11/19 14:40:32
Complete: DetectPatchedBootstrapAction at: 2005/11/19 14:40:32, returned true
Action "LaunchPatchedBootstrapAction" will be skipped due to the following restrictions:
Condition "EventCondition: __STP_LaunchPatchedBootstrap__5824" returned false.
Running: PerformSCCAction2 at: 2005/11/19 14:40:32
Loaded DLL:C:WINNTsystem32msi.dll Version:3.1.4000.2435
Loaded DLL:C:WINNTsystem32msi.dll Version:3.1.4000.2435
Complete: PerformSCCAction2 at: 2005/11/19 14:40:33, returned true
Running: PerformDotNetCheck at: 2005/11/19 14:40:33
Complete: PerformDotNetCheck at: 2005/11/19 14:40:33, returned true
Running: ComponentUpdateAction at: 2005/11/19 14:40:33
Complete: ComponentUpdateAction at: 2005/11/19 14:41:6, returned true
Running: DetectLocalBootstrapAction at: 2005/11/19 14:41:6
Complete: DetectLocalBootstrapAction at: 2005/11/19 14:41:6, returned true
Running: LaunchLocalBootstrapAction at: 2005/11/19 14:41:6
Error: Action "LaunchLocalBootstrapAction" threw an exception during execution. Error information reported during run:
"c:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe" finished and returned: 1706
Aborting queue processing as nested installer has completed
Message pump returning: 1706
C:Program Filesmicrosoft sql server90setup bootstraplogfilesSQLSetup0003_US05046_Core(Local).log:
Microsoft SQL Server 2005 Setup beginning at Mon Dec 19 14:41:10 2005
Process ID : 5476
c:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe Version: 2005.90.1399.0
Running: LoadResourcesAction at: 2005/11/19 14:41:9
Complete: LoadResourcesAction at: 2005/11/19 14:41:9, returned true
Running: ParseBootstrapOptionsAction at: 2005/11/19 14:41:9
Loaded DLL:c:Program FilesMicrosoft SQL Server90Setup Bootstrapxmlrw.dll Version:2.0.3604.0
Complete: ParseBootstrapOptionsAction at: 2005/11/19 14:41:9, returned true
Running: ValidateWinNTAction at: 2005/11/19 14:41:9
Complete: ValidateWinNTAction at: 2005/11/19 14:41:9, returned true
Running: ValidateMinOSAction at: 2005/11/19 14:41:9
Complete: ValidateMinOSAction at: 2005/11/19 14:41:9, returned true
Running: PerformSCCAction at: 2005/11/19 14:41:9
Complete: PerformSCCAction at: 2005/11/19 14:41:9, returned true
Running: ActivateLoggingAction at: 2005/11/19 14:41:9
Complete: ActivateLoggingAction at: 2005/11/19 14:41:10, returned true
Running: DetectPatchedBootstrapAction at: 2005/11/19 14:41:10
Complete: DetectPatchedBootstrapAction at: 2005/11/19 14:41:10, returned true
Action "LaunchPatchedBootstrapAction" will be skipped due to the following restrictions:
Condition "EventCondition: __STP_LaunchPatchedBootstrap__5476" returned false.
Action "BeginBootstrapLogicStage" will be skipped due to the following restrictions:
Condition "Setup is running locally." returned true.
Running: PerformDotNetCheck2 at: 2005/11/19 14:41:10
Complete: PerformDotNetCheck2 at: 2005/11/19 14:41:12, returned true
Running: InvokeSqlSetupDllAction at: 2005/11/19 14:41:12
Loaded DLL:c:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlspars.dll Version:2005.90.1399.0
<Func Name='DwLaunchMsiExec'>
Examining 'sqlspars' globals to initialize 'SetupStateScope'
Opening 'MachineConfigScope' for [US05046]
Trying to find Product Code from command line or passed transform
If possible, determine install id and type
Trying to find Instance Name from command line.
No Instance Name provided on the command line
If possible, determine action
Machine = US05046, Article = WMIServiceWin32OSWorking, Result = 0 (0x0)
Machine = US05046, Article = WMIServiceWin32CompSystemWorking, Result = 0 (0x0)
Machine = US05046, Article = WMIServiceWin32ProcessorWorking, Result = 0 (0x0)
Machine = US05046, Article = WMIServiceReadRegWorking, Result = 0 (0x0)
Machine = US05046, Article = WMIServiceWin32DirectoryWorking, Result = 0 (0x0)
Machine = US05046, Article = WMIServiceCIMDataWorking, Result = 0 (0x0)
Machine = US05046, Article = XMLDomDocument, Result = 0 (0x0)
Machine = US05046, Article = Processor, Result = 0 (0x0)
Machine = US05046, Article = PhysicalMemory, Result = 0 (0x0)
Machine = US05046, Article = DiskFreeSpace, Result = 0 (0x0)
Machine = US05046, Article = OSVersion, Result = 0 (0x0)
Machine = US05046, Article = OSServicePack, Result = 0 (0x0)
Machine = US05046, Article = OSType, Result = 0 (0x0)
Machine = US05046, Article = AdminShare, Result = 0 (0x0)
Machine = US05046, Article = PendingReboot, Result = 0 (0x0)
Machine = US05046, Article = IEVersion, Result = 0 (0x0)
Machine = US05046, Article = DriveWriteAccess, Result = 0 (0x0)
Machine = US05046, Article = COMPlus, Result = 0 (0x0)
Machine = US05046, Article = ASPNETVersionRegistration, Result = 0 (0x0)
*******************************************
Setup Consistency Check Report for Machine: US05046
*******************************************
Article: WMI Service Requirement, Result: CheckPassed
Article: MSXML Requirement, Result: CheckPassed
Article: Operating System Minimum Level Requirement, Result: CheckPassed
Article: Operating System Service Pack Level Requirement, Result: CheckPassed
Article: SQL Compatibility With Operating System, Result: CheckPassed
Article: Minimum Hardware Requirement, Result: CheckPassed
Article: Pending Reboot Requirement, Result: CheckPassed
Article: Default Installation Path Permission Requirement, Result: CheckPassed
Article: Internet Explorer Requirement, Result: CheckPassed
Article: Check COM+ Catalogue, Result: CheckPassed
Article: ASP.Net Registration Requirement, Result: CheckPassed
<Func Name='PerformDetections'>
0
<EndFunc Name='PerformDetections' Return='0' GetLastError='0'>
Loaded DLL:c:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlsval.dll Version:2005.90.1399.0
<EndFunc Name='DwLaunchMsiExec' Return='0' GetLastError='0'>
Complete: InvokeSqlSetupDllAction at: 2005/11/19 14:42:59, returned true
Running: SetPackageInstallStateAction at: 2005/11/19 14:42:59
Complete: SetPackageInstallStateAction at: 2005/11/19 14:43:1, returned true
Running: DeterminePackageTransformsAction at: 2005/11/19 14:43:1
Complete: DeterminePackageTransformsAction at: 2005/11/19 14:43:5, returned true
Running: ValidateSetupPropertiesAction at: 2005/11/19 14:43:5
Complete: ValidateSetupPropertiesAction at: 2005/11/19 14:43:5, returned true
Running: OpenPipeAction at: 2005/11/19 14:43:5
Complete: OpenPipeAction at: 2005/11/19 14:43:5, returned false
Error: Action "OpenPipeAction" failed during execution.
Running: CreatePipeAction at: 2005/11/19 14:43:5
Complete: CreatePipeAction at: 2005/11/19 14:43:5, returned false
Error: Action "CreatePipeAction" failed during execution.
Action "RunRemoteSetupAction" will be skipped due to the following restrictions:
Condition "Action: CreatePipeAction has finished and passed." returned false.
Running: PopulateMutatorDbAction at: 2005/11/19 14:43:5
Complete: PopulateMutatorDbAction at: 2005/11/19 14:43:5, returned true
Running: GenerateRequestsAction at: 2005/11/19 14:43:5
SQL_Engine = 3
SQL_Data_Files = 3
SQL_Replication = 3
SQL_FullText = -1
SQL_SharedTools = 3
SQL_BC_DEP = -1
Analysis_Server = -1
AnalysisDataFiles = -1
AnalysisSharedTools = -1
RS_Server = -1
RS_Web_Interface = -1
RS_SharedTools = -1
Notification_Services = -1
NS_Engine = -1
NS_Client = -1
SQL_DTS = -1
Client_Components = 3
Connectivity = 3
SQL_Tools90 = -1
SQL_WarehouseDevWorkbench = -1
SDK = 3
SQLXML = -1
Tools_Legacy = -1
TOOLS_BC_DEP = -1
SQL_Documentation = -1
SQL_BooksOnline = -1
SQL_DatabaseSamples = -1
SQL_AdventureWorksSamples = -1
SQL_AdventureWorksDWSamples = -1
SQL_AdventureWorksASSamples = -1
SQL_Samples = -1
Complete: GenerateRequestsAction at: 2005/11/19 14:43:11, returned true
Running: CreateProgressWindowAction at: 2005/11/19 14:43:11
Complete: CreateProgressWindowAction at: 2005/11/19 14:43:12, returned false
Error: Action "CreateProgressWindowAction" failed during execution.
Running: ScheduleActionAction at: 2005/11/19 14:43:12
Complete: ScheduleActionAction at: 2005/11/19 14:43:13, returned true
Skipped: InstallASAction.11
Skipped: Action "InstallASAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "as", install will be skipped as a result.
Skipped: InstallASAction.18
Skipped: Action "InstallASAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "as", install will be skipped as a result.
Skipped: InstallASAction.22
Skipped: Action "InstallASAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "as", install will be skipped as a result.
Skipped: InstallASAction.9
Skipped: Action "InstallASAction.9" was not run. Information reported during analysis:
No install request found for package: "msxml6", referred by package: "as", install will be skipped as a result.
Skipped: InstallDTSAction
Skipped: Action "InstallDTSAction" was not run. Information reported during analysis:
No install request found for package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.11
Skipped: Action "InstallDTSAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.12
Skipped: Action "InstallDTSAction.12" was not run. Information reported during analysis:
No install request found for package: "sqlncli", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.18
Skipped: Action "InstallDTSAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.22
Skipped: Action "InstallDTSAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.9
Skipped: Action "InstallDTSAction.9" was not run. Information reported during analysis:
No install request found for package: "msxml6", referred by package: "dts", install will be skipped as a result.
Skipped: InstallNSAction
Skipped: Action "InstallNSAction" was not run. Information reported during analysis:
No install request found for package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.11
Skipped: Action "InstallNSAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.12
Skipped: Action "InstallNSAction.12" was not run. Information reported during analysis:
No install request found for package: "sqlncli", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.18
Skipped: Action "InstallNSAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.22
Skipped: Action "InstallNSAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.9
Skipped: Action "InstallNSAction.9" was not run. Information reported during analysis:
No install request found for package: "msxml6", referred by package: "ns", install will be skipped as a result.
Skipped: InstallRSAction.11
Skipped: Action "InstallRSAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "rs", install will be skipped as a result.
Skipped: InstallRSAction.18
Skipped: Action "InstallRSAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "rs", install will be skipped as a result.
Skipped: InstallRSAction.22
Skipped: Action "InstallRSAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "rs", install will be skipped as a result.
Running: InstallSqlAction.11 at: 2005/11/19 14:43:14
Installing: sqlsupport on target: US05046
Complete: InstallSqlAction.11 at: 2005/11/19 14:43:26, returned true
Running: InstallSqlAction.12 at: 2005/11/19 14:43:26
Installing: sqlncli on target: US05046
Complete: InstallSqlAction.12 at: 2005/11/19 14:43:40, returned true
Skipped: InstallSqlAction.18
Skipped: Action "InstallSqlAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "sql", install will be skipped as a result.
Running: InstallSqlAction.21 at: 2005/11/19 14:43:40
Installing: sqlwriter on target: US05046
Failed to install package
Fatal error during installation.
Setting package return code to: 1706
Complete: InstallSqlAction.21 at: 2005/11/19 14:43:50, returned false
Error: Action "InstallSqlAction.21" failed during execution. Error information reported during run:
Target collection includes the local machine.
Invoking installPackage() on local machine.
Skipped: InstallSqlAction.22
Skipped: Action "InstallSqlAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "sql", install will be skipped as a result.
Running: InstallSqlAction.9 at: 2005/11/19 14:43:50
Installing: msxml6 on target: US05046
Complete: InstallSqlAction.9 at: 2005/11/19 14:43:54, returned true
Running: InstallToolsAction.11 at: 2005/11/19 14:43:54
Installing: sqlsupport on target: US05046
Complete: InstallToolsAction.11 at: 2005/11/19 14:44:2, returned true
Running: InstallToolsAction.12 at: 2005/11/19 14:44:2
Installing: sqlncli on target: US05046
Complete: InstallToolsAction.12 at: 2005/11/19 14:44:11, returned true
Skipped: InstallToolsAction.13
Skipped: Action "InstallToolsAction.13" was not run. Information reported during analysis:
No install request found for package: "PPESku", referred by package: "tools", install will be skipped as a result.
Skipped: InstallToolsAction.18
Skipped: Action "InstallToolsAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "tools", install will be skipped as a result.
Skipped: InstallToolsAction.20
Skipped: Action "InstallToolsAction.20" was not run. Information reported during analysis:
No install request found for package: "BOL", referred by package: "tools", install will be skipped as a result.
Skipped: InstallToolsAction.22
Skipped: Action "InstallToolsAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "tools", install will be skipped as a result.
Running: InstallToolsAction.9 at: 2005/11/19 14:44:11
Installing: msxml6 on target: US05046
Complete: InstallToolsAction.9 at: 2005/11/19 14:44:15, returned true
Action "InstallSqlAction" will return false due to the following preconditions:
Condition "Action: InstallSqlAction.21 has finished and failed." returned true.
Installation of package: "sql" failed due to a precondition.
Step "InstallSqlAction" was not able to run.
Skipped: InstallNSAction.10
Skipped: Action "InstallNSAction.10" was not run. Information reported during analysis:
No install request found for package: "sqlxml4", referred by package: "ns", install will be skipped as a result.
Running: InstallToolsAction at: 2005/11/19 14:44:15
Installing: tools on target: US05046
Complete: InstallToolsAction at: 2005/11/19 14:44:26, returned true
Skipped: InstallToolsAction.10
Skipped: Action "InstallToolsAction.10" was not run. Information reported during analysis:
No install request found for package: "sqlxml4", referred by package: "tools", install will be skipped as a result.
Skipped: RepairForBackwardsCompatRedistAction
Skipped: Action "RepairForBackwardsCompatRedistAction" was not run. Information reported during analysis:
Action: "RepairForBackwardsCompatRedistAction" will be skipped due to the following condition:
Condition "sql was successfully upgraded." returned false. Condition context:
sql failed to upgrade and so the uninstall of the upgraded product will not occur.
Error: Action "UninstallForMSDE2000Action" failed during execution. Error information reported during run:
Action: "UninstallForMSDE2000Action" will be marked as failed due to the following condition:
Condition "sql was successfully upgraded." returned false. Condition context:
sql failed to upgrade and so the uninstall of the upgraded product will not occur.
Installation of package: "patchMSDE2000" failed due to a precondition.
Error: Action "UninstallForSQLAction" failed during execution. Error information reported during run:
Action: "UninstallForSQLAction" will be marked as failed due to the following condition:
Condition "sql was successfully upgraded." returned false. Condition context:
sql failed to upgrade and so the uninstall of the upgraded product will not occur.
Installation of package: "patchLibertySql" failed due to a precondition.
Skipped: InstallASAction
Skipped: Action "InstallASAction" was not run. Information reported during analysis:
No install request found for package: "as", install will be skipped as a result.
Skipped: InstallRSAction
Skipped: Action "InstallRSAction" was not run. Information reported during analysis:
No install request found for package: "rs", install will be skipped as a result.
Skipped: UninstallForRS2000Action
Skipped: Action "UninstallForRS2000Action" was not run. Information reported during analysis:
Action: "UninstallForRS2000Action" will be skipped due to the following condition:
Condition "Action: InstallRSAction was skipped." returned true.
Running: ReportChainingResults at: 2005/11/19 14:44:27
Error: Action "ReportChainingResults" threw an exception during execution.
One or more packages failed to install. Refer to logs for error details. : 1706
Error Code: 0x800706aa (1706)
Windows Error Text: The endpoint format is invalid.
Source File Name: sqlchainingsqlchainingactions.cpp
Compiler Timestamp: Thu Sep 1 22:23:05 2005
Function Name: sqls::ReportChainingResults::perform
Source Line Number: 3097
---- Context -----------------------------------------------
sqls::HostSetupPackageInstallerSynch::postCommit
sqls::HighlyAvailablePackage::preInstall
sqls::HighlyAvailablePackage::manageVsResources
ce: 29539
Error: Failed to add file :"C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0003_US05046_.NET Framework 2.0.log" to cab file : "C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSqlSetup0003.cab" Error Code : 2
Running: UploadDrWatsonLogAction at: 2005/11/19 14:44:52
Message pump returning: 1706
View 2 Replies
View Related
Apr 4, 2008
Ive seen this asked all over but am yet to find a fix for my case.
I have 1 SharePoint 2007 server
1 SQL 2005 SP2 server with Reporting services running
Reporting services is configured and running all with ticks in SharePoint integration mode, the reporting services section shows up in Central Admin ok.
When I try to access reporting services I get the error :
http://reports.domain/reportserver
Report Server has encountered a SharePoint error. (rsSharePointError) Get Online Help
For more information about this error navigate to the report server on the local server machine, or enable remote errors Looking thru the logs I get the error :
w3wp!library!d!04/04/2008-13:54:20:: Call to GetItemTypeAction(/).
w3wp!library!d!04/04/2008-13:54:20:: Call to ListParentsAction(/).
w3wp!library!d!04/04/2008-13:54:20:: Call to ListChildrenAction(/, False).
w3wp!library!d!04/04/2008-13:54:20:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint error., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint error. ---> System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.ReportingServices.SharePoint.Server.SharePointDBInterface.internalFindObjectsNonRecursive(String wssUrl, CatalogItemList& children)
at Microsoft.ReportingServices.SharePoint.Server.SharePointDBInterface.FindObjectsNonRecursive(String wssUrl, CatalogItemList& childList, Security secMgr, IPathTranslator pathTranslator, Boolean appendMyReports)
--- End of inner exception stack trace ---
I setup a new website called RS Web Site in IIS on the SQL box, I then set this in the Configure Report Server. I have made sure Annonymous access is off.
Does anyone know how on earth I can resolve this ..
Many Thanks
Marcus
View 2 Replies
View Related
Mar 17, 2008
the query is below ;
Select Model, Kota as [Çıkan Anket]
,
(Select Count(*) From dbo.Main Where RuhsatSahibiModel = tt.Model) as [Verilen Adres] , (Select Count(RuhsatSahibiSahisID) From dbo.Main Where DurumKoduID in(1,2,3,4,5,6,9,12,13,14,15,16,17,20,21,22,23,24,25,26,27,28) and RuhsatSahibiModel = tt.Model) as [Donen Adres]
,
(Select Count(*) From dbo.Main Where DurumKoduID = 2 and RuhsatSahibiModel = tt.Model) as [Donen Anket] ,((Select cast(Count(*) as decimal(2,0)) From dbo.Main Where DurumKoduID = 2 and RuhsatSahibiModel = tt.Model ) / (Select top 1 (cast(Kota as decimal(2,0))) From dbo.Model Where Model = tt.Model))*100 as [Oran]
,
(Kota - (Select Count(*) From dbo.Main Where DurumKoduID = 2 and RuhsatSahibiModel = tt.Model)) as [Kalan Anket] , ((Select Count(*) From dbo.Main Where RuhsatSahibiModel = tt.Model)- (Select Count(RuhsatSahibiSahisID) From dbo.Main Where DurumKoduID in(1,2,3,4,5,6,9,12,13,14,15,16,17,20,21,22,23,24,25,26,27,28) and RuhsatSahibiModel = tt.Model)) as [Kalan Adres]
From
(SELECT Model, SUM(Kota) AS Kota FROM dbo.Model GROUP BY Model) as tt where tt.Model in('A3')
it's returning error message : "Divide by zero error encountered."
View 3 Replies
View Related
Aug 1, 2006
I have a SSIS package that reads data from a dump table, runs a custom script that takes date data and converts it to the correct format or nulls and formats amt fields to currency, then inserts it to a new table. The new table redirects insert errors. This process worked fine until about 3 weeks ago. I am processing just under 6 million rows, with 460,000 or so insert errors that did give error column and code.
Now, I am getting 1.5 million errors. and nothing has changed, to my knowledge. I receive the following information.
Error Code -1071607685 Error Column 0 Error Desc No status is available.
The only thing I can find for the above error code is
DTS_E_OLEDBDESTINATIONADAPTERSTATIC_UNAVAILABLE
To add to the confusion, I can not see any errors in the data written to the error table. It appears that after a certain point is reached in the processing, everything, or most records, error out.
Any help is appreciated.
Thanks
Derrick
View 21 Replies
View Related
May 13, 2008
Using the following code we are having a problem connecting a clients WIndows Mobile device to the SDF under IIS. We have success elsewhere. Does anyone have any clues ?
Cheers Al
Dim repl As New SqlCeReplication()
Try
repl.InternetUrl = InternetUrl
repl.Publisher = Repl_Publisher
repl.PublisherDatabase = Repl_PublisherDatabase
repl.PublisherSecurityMode = SecurityType.DBAuthentication
repl.Publication = Repl_Publication
repl.Subscriber = Repl_Subscriber
repl.SubscriberConnectionString = Repl_SubscriberConnectionString
repl.DistributorLogin = Handhelds_User
repl.DistributorPassword = Handhelds_Password
repl.AddSubscription(AddOption.ExistingDatabase)
repl.Synchronize()
MsgBox("Synched!")
Catch err As SqlCeException
MessageBox.Show(err.ToString, "Error")
Finally
Cursor.Current = System.Windows.Forms.Cursors.WaitCursor
End Try
View 3 Replies
View Related
Feb 11, 2014
I’m trying to import data from CSV to SQL Server 2012 and I’m using SSIS 2012.
CSV file data:
Field1,Field2
“123”,”abc “xyz” wxy”
The data should read into the database as
Field1 Field2
abcabc “xyz” wxy
The problem is in ”abc “xyz” wxy”
if I add another set of double quotes inside the field double quotes it will work.
”abc ““xyz”” wxy”
Anyway I can fix this without writing a text parser?
View 1 Replies
View Related
Oct 8, 2014
Microsoft SQL Server 2012 - 11.0.2100.60 (X64) Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
we are using the default of newsequentialID() as the key on some tables and getting the error
Error validating the default for column xxx
When first saving the table if the value is entered as newsequentialid() the save works but on any subsequent design change I get the error.
If you click Yes to continue it works fine.
The value that is in there once its saved shows up as (newsequentialid()) if you change it back to not have the outer parenthesis it saves without issue.
View 3 Replies
View Related
Oct 22, 2006
I got this error message during SQL Server Express install with no error code on Server 2003 SP1. I'm installing on an older development machine and although I do have a very large log file somewhere I wanted to post before I even dug into it. I noticed in IIS under my Webs that the MSSQLExpress webs were there at first but when I clicked on them to get any info or Properties... they dissapeared. So they were almost installed but they no longer exist. Also I do not have a SQL Service Manager icon down near the clock.
I almost took a step to fix this. After reading a few posts about similar problems I thought maybe this happened because the Default Web Sites IP # was not set to (All Unassigned). I was going to try a repair install from Add/Remove Programs but the temporary setup files are already gone. I really dont want to uninstall all 5 SQL components from Add/Remove Programs and start from scratch.
As good security practice we usually remove the Default Web or as in this development servers case we changed the IP from (All Unassigned) to an IP that is only accessible from certain machines on the internal network. I obviously should have read more pre setup guides. Anyway how can I fix this without reinstalling everything?
View 2 Replies
View Related
Apr 18, 2014
We made SSIS package in dev environment in windows 2008R2 and SQL server 2012. Same packages were placed on SAN disks in cluster environment and are invoked with security contexxt of admin user and wih dtexec utility ( we call this using an sp). rarely but procedure completed i see the log text file by SSIS package and find the return code 5 means package is unable to load. i canst found what are the exact reasons for return code 5.
View 2 Replies
View Related
Nov 2, 2015
When my ForEach Loop runs, when a file does not exist on the server, I am getting a File does not exist error.I would prefer to write a mesaage to my log and then move on to the next step successfully.When I got to Event Handlers and select OnTaskFailed, what do I want to do from here?
View 0 Replies
View Related
Nov 14, 2013
I am writing the following code in my SSIS 2012 script task.I am deliberately trying to fali this code by adding some typos in the connection string.I want to catch the exception and display the exact exception message.but SSIS runtime is always throwing same error message as follows:
Exception has been thrown by the target of an invocation.
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript()
Below is the code
public void Main()
{
//TODO: Add your code here
try
{
SqlConnection conn = new SqlConnection("Data Source=apsed1674;Integrated Security=true;database=EDX");
[Code] ....
View 9 Replies
View Related
Sep 24, 2014
I am building a bunch of packages on our new server and all was going well until I edited the project using the client tools on my PC. I now receive the below error if I try to execute any of the packages on the server (all is still fine on the client). I have scoured the net but I don't seem to be able to come up with a solution. I have tried altering the folder & object permissions for my login (that created the project on the server and edited using the client) but I still get the error.
ERROR:
TITLE: Microsoft Visual Studio
------------------------------
Failed to start project
------------------------------
ADDITIONAL INFORMATION:
Exception deserializing the package "Access to the path 'G:VisualStudioTestTestbinDevelopmentTest.ispac' is denied.". (Microsoft.DataTransformationServices.VsIntegration)
------------------------------
Access to the path 'G:VisualStudioTestTestbinDevelopmentTest.ispac' is denied. (mscorlib)
------------------------------
BUTTONS:
OK
------------------------------
View 4 Replies
View Related
Feb 1, 2008
Hi,
I'm importing data from Navision 3.70A Database (not MS SQL Server) with SSIS and data reader via odbc.
Works perfect until I try to import a table which has a column including cells with | (pipe symbol) and .. (dots) between numbers.
8420|8421|8430|8431
8900..8944
the error message from data reader:
[get sachkonto [5165]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR.
The "component "get sachkonto" (5165)" failed because error code 0x80004003 occurred, and the error
row disposition on "output column "Zusammenzählung" (8265)" specifies failure on error. An error
occurred on the specified object of the specified component. There may be error messages posted
before this with more information about the failure.
No error message exist before this message.
Is there an option to allow or a workaround?
Maybe a replace function in the sql command can help but I have no sql manual for the native database of navision.
Can somebody help with an example of a query?
I can read this table with Excel via ODBC without problems ...
Thanks in advanced!
View 5 Replies
View Related
