SQL 2012 :: Get Identity Column Value When Update Statement Fails
Sep 9, 2015
My current proc updates(updates using joins of two or three tables) millions of records as per the condition provided for each department.
However, when the proc fails it writes to a ErrorTable, ERROR_MESSAGE(), ERROR_SEVERITY() and which department has failed.
Since the records are updated keeping the selected departments in loop, I get the department in a temp variable.
Now, I was asked to log the specific record where the failure was occured.
Something like log the identity column value or primary key value which record has failed.
View 4 Replies
ADVERTISEMENT
Sep 9, 2015
My current proc updates(updates using joins of two or three tables) millions of records as per the condition provided for each department.
However, when the proc fails it writes to a ErrorTable, ERROR_MESSAGE(), ERROR_SEVERITY() and which department has failed.
Since the records are updated keeping the selected departments in loop, I get the department in a temp variable.Now, I was asked to log the specific record where the failure was occured.Something like log the identity column value or primary key value which record has failed.
View 2 Replies
View Related
Jul 25, 2015
I have a four tables called plandescription, plandetail and analysisdetail. The table plandescription has the columns DetailQuestionID which is the primary and identity column and a QuestionDescription column.
The table plandetail consists of the column PlanDetailID which the primary and identity column, DetailQuestionID which is the foreign key attribute of plandescription table and a planID column.
The third table analysisdetail consists of a analysisID which the primary and identity column, PlanDetailID which is the foreign key attribute of plandetail table and a scenario.
Below is the schema of the three tables
I have a two web form that will insert, update and delete data into these three tables in a two transaction. One web form will perform CRUD operations in plandescription and plandetail table. When the user inserts QuestionDescription and planid in this web form, I will insert the QuestionDescription Value in the plandescription table and will generate a DetailQuestionID value and this value is fed to the plandetail table with the planid. Here I will generate a PlanDetailID.
Once this transaction is done, I will show the second web form in which the user enters the scenario and this will be mapped with the plandescription using the PlanDetailID.
This schema cannot be changes as this is the client requirement. When I insert values I don’t have any problem. However when I update existing data, I need to delete existing PlanDetailID in the plandetail table and recreate PlanDetailID data for that DetailQuestionID and planID. This is because, the user will be adding or deleting a planID associated with the QuestionDescription.
Once I recreate PlanDetailID for that DetailQuestionID and planID, I need to update the old PlanDetailID with the new PlanDetailID in the third table analysisdetail for the associated analysisID.
I created a #Temp table called #DetailTable to insert the values analysisID, planid and old PlanDetailID and new PlanDetailID so that I can have them in update statement once I delete the data from plandetail table for that PlanDetailID.
Then I deleted the plandetailid from the plandetail table and recreate PlanDetailID for that DetailQuestionID. During my recreation I fetched the new PlanDetailID’s created into another temp table called #InsertedRows
After this I am running a while loop to update the temp table #DetailTable with the newly created PlanDetailID for the appropriate planID’s. The problem is here. When I have the same number of planID’s for example 2 planID’s 1,2 I will have only two old PlanDetailID and new PlanDetailID for that planID and analysisID.But When I add a new PlanID or remove a existing planID I am getting null value for that newly added or deleted planID. This is affecting my update statement of analysisdetail table as PlanDetailID cannot be null.
I tried to remove the Null value from the #DetailTable by running the update statement of analysis detail in a while loop however its not working.
DECLARE @categoryid INT = 8
DECLARE @DetailQuestionID INT = 1380
/*------- I need the query to run for the below three data.
Here i'm updating my planids that already exists in my database*/
DECLARE @planids VARCHAR(MAX) = '2,4,5'
[code].....
View 2 Replies
View Related
Oct 7, 2014
Msg 4104, Level 16, State 1, Line 13
The multi-part identifier "Fatals_CTE.t_enrollmentID" could not be bound.
Here are the table definitions:
CREATE TABLE [dbo].[Enroll](
[enrollmentID] [int] IDENTITY(10000,1) NOT NULL,
[e_PatientID] [int] NOT NULL,
[e_ProtocolNo] [varchar](30) NOT NULL,
[enrollDate] [datetime] NULL,
[enrollOK] [bit] NULL,
[Code] .....
WHERE enrollmentID = Fatals_CTE.t_enrollmentID;
(I'm trying to update an enrollment's LeaveDate to the date of his Grade 5 event. )
View 2 Replies
View Related
Jan 25, 2015
I have table of three column first column is an ID column. However at creation of the table i have not set this column to auto increment. Then i have copied 50 rows in another table to this table then set the ID column values to zero.
Now I have changed the ID column to auto increment seed=1 increment=1 but the problem is i couldn't figure out how to update this ID column with zero value set to each row with this auto increment values so the ID column would have values from 1-50. Is there a away to do this?
View 6 Replies
View Related
Mar 28, 1999
When replicating a table which has an identity column I get the error: "Procedure cp_insert_tblname expects parameter @C1, which was not supplied.". The stored procedure appears to be called without any parameters so my insert stored procedure does not work. I know I'm missing something basic here!! Do I have to add the field names when telling replication to use a custom stored procedure. If not, how do arguments get passed to my SP, as globals somehow?
Any info greatly appreciated!!
Thanks,
Jay
View 1 Replies
View Related
Jan 24, 2008
This is a very weird problem. SQL 2000. A bcp calls an SP:
bcp "exec MyDB.dbo.usp_DF_NA_Analytics_OOW" queryout SomeFile.dat -T -c -t "|" -S "MySvrMyInst"
SP code:
----------------------------
CREATE PROCEDURE dbo.usp_DF_NA_Analytics_OOW AS
BEGIN
SET NOCOUNT ON
--Declare Variables
DECLARE @CURRENTDATE DATETIME
DECLARE @BEGINTIME DATETIME
declare @feedname varchar(50)
set @feedname = 'DF_NA_Analytics_OOW'
SET @CURRENTDATE = CURRENT_TIMESTAMP
-- ensure there is a row for us - create 1 if it doesn't exist
exec usp_datafeed_timestamp_init @feedname
SET @BEGINTIME = (
SELECT LastRunTime
FROM NewAccounts.dbo.DataFeed_Timestamp
WHERE TaskName = @feedname
)
select oowReason.OOWTransaction_id,
oowReason.Position,
oowReason.ReasonCode,
oowTx.UpdateDateTime
from OOWTransaction oowTx (nolock)
join OOWReason oowReason (nolock)
on oowReason.OOWTransaction_id = oowTx.OOWTransaction_id
WHERE oowTx.UpdateDateTime >= @BEGINTIME and oowTx.UpdateDateTime < @CURRENTDATE
ORDER BY oowReason.OOWTransaction_id, Position
-- update the timestamp
exec usp_UPD @feedname, @currentdate
end
------------------------------
ALTER procedure dbo.usp_UPD (@feedname varchar(50), @lastruntime datetime)
as
begin
set nocount on
if not exists (select * from dbo.datafeed_timestamp where lower(taskname) = lower(@feedname))
INSERT INTO Datafeed_Timestamp(TaskName, LastRunTime) VALUES(@feedname, @lastruntime )
else
update Datafeed_Timestamp
set LastRunTime = @lastruntime
where TaskName = @feedname
end
----------------------------------------
The above bcp fails consistently unless the "exec usp_UPD" is completely removed.
Even if I substitute it with the update stmt instead of the SP call, it still fails.
I move the usp_UPD call and move it above the select making the select as the last command in the SP -- still fails.
Removed Order by -- still fails.
The weird thing is -- several other SPs that follow the same exact format (only select query is different) - they all succeed everytime.
This above bcp fails everytime unless the usp_UPD is fully removed.
I have tried putting the result dataset into a table variable and select it in the end -- still fails. several other attempt to workaround - fails -- by fails I mean "0 rows returned" from bcp -- when the UPD is removed, it returns the correct dataset. Otherwise always returns 0 rows.
Outside bcp, if I simply execute the SP from QA, it returns the correct dataset everytime. From bcp, it just doesn't like it. It returns 0 rows everytime, but does the UPD task -- the value does get updated adter execution.
Any thoughts/ideas? This thing is driving me NUTS
Thanks,
Rajesh
View 1 Replies
View Related
Jan 9, 2015
Ok I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".
Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.
View 4 Replies
View Related
Aug 13, 2014
i was tasked to created an UPDATE statement for 6 tables , i would like to update 4 columns within the 6 tables , they all contains the same column names. the table gets its information from the source table, however the data that is transferd to the 6 tables are sometimes incorrect , i need to write a UPDATE statement that will automatically correct the data. the Update statement should also contact a where clause
the columns are [No] , [Salesperson Code], [Country Code] and [Country Name]
i was thinking of doing
Update [tablename]
SET [No] =
CASE
WHEN [No] ='AF01' THEN 'Country Code' = 'ZA7' AND 'Country Name' = 'South Africa'
ELSE 'Null'
END
What is the best way to script this
View 1 Replies
View Related
Oct 16, 2006
I ve a simple table with a column of type datetime. I ve successfully inserted the following values in it,
2006-09-13 18:00:10
2006-09-14 18:00:10
2006-09-15 18:00:10
however, it fails when i try to insert the value 0000-00-00 00:00:00. ie., the following insert statement fails
INSERT INTO TEST VALUES('0000-00-00 00:00:00')
The error thrown is,
Server Msg 242, Level 16, State 3, Line 1
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value. The statement has been terminated.
View 13 Replies
View Related
Feb 5, 2001
hi,
i got a little problem. when i insert values into a table a trigger is launched wich updates something in the table too.
CREATE TRIGGER T1 ON Tbl
FOR INSERT AS
BEGIN
IF (UPPER(USER) <> 'CONVERSIE')
BEGIN
UPDATE Tbl SET
Datum = GetDate(),
User = USER,
WHERE Tbl.ID= (SELECT ID FROM inserted)
END
END
the error i receive is this: 'can not update identity column id' (id being pk).
does anyone know how to deal with this?
tnx,
erik.
View 1 Replies
View Related
Dec 24, 2007
Hello,
I have a frustrating problem occuring in Sql 2005. We have the need
in a few client upgrade situations to update the indentity column of a common
resource table. It is populated each release with common records and the
keys got out of sync for two releases due to developer error.
In Oracle this is not a problem. In SQL we get the message "Cannot
update identity column 'mycolumn'". To get around this in SQL 2000 we
updated the table by running the following.
exec sp_configure 'allow update', 1
go
reconfigure with override
go
update syscolumns set colstat = colstat - 1
where id = object_id(Event')
and name = 'EventKey'
go
exec sp_configure 'allow update', 0
go
reconfigure with override
go
In SQL 2005 this gives us the error
'Ad hoc updates to system catalogs are not allowed'.
Now I understand the need to keep people out of the system tables.
However, can I have some sort of solution to this problem. I'm running a
bunch of ad hoc queries to update the values and I don't want to create an
exact duplicate of the table and copy over the information with the changes.
It is much easier to run a simple update.
Please advise...
Thanks,
Russ
View 4 Replies
View Related
Feb 13, 2014
The identity int column in my sql2012 db is not incrementing properly.
I have a table which uses an int auto identity as a primary key it is sporadically skipping increments, for example:
1, 2, 3, 4, 5, 1004, 1005
This is happening on a random number of tables at very random times...
View 5 Replies
View Related
Mar 9, 2014
We have identity functionality for integer , Similarly i want for characters .i.e.
EX:
ID Name Sal
CD101 A 1000
CD102 B 2000
CD103 C 3000
CD104 D 4000
CD105 E 5000
I want output like above, I wont provide Value for ID column. It it should take automatically while inserting data into table.(like identity column)? Is it possible in SQL Server?
View 9 Replies
View Related
Mar 18, 2015
I have a job that runs nightly, rebuild index. job runs fine every night but every few weeks it fails.
USE msdb
GO
EXECUTE dbo.IndexOptimize
@Databases = 'USER_DATABASES',
@FragmentationLow = NULL,
@FragmentationMedium = 'INDEX_REORGANIZE,INDEX_REBUILD_ONLINE,INDEX_REBUILD_OFFLINE',
@FragmentationHigh = 'INDEX_REBUILD_ONLINE,INDEX_REBUILD_OFFLINE',
@FragmentationLevel1 = 5,
@FragmentationLevel2 = 30,
@SortInTempdb = 'Y',
@UpdateStatistics = 'ALL',
@OnlyModifiedStatistics = 'Y'
This calls the Sp that does the Reindex. It fails at the update statistics with a very generic message. like " Command: UPDATE STATISTICS [xxxx_DB].[dbo].[xxxx_xxx] [_WA_Sys_00000007_49C3F6B7] [SQ... The step failed."
I suspect it has more error but this is all it is showing me when I right click on the job history. therefore, I updated the job step in the advance tab with log to a txt file. Am I on the right track or there is another way to see error some where else.
I looked at the logs but they didn't show any thing.
View 9 Replies
View Related
Dec 4, 2003
I set up replication on my DB between two server. The Publisher will not update tables on the Subscriber that use an identity column and I get an error "8102:cannot update identity column". I have looked around and can't seem to locate any solid fixes. If I remove the identity column from the subscribers tables the package works, but I am not able to use the DB on the subscriber because I need the Identity columns for my app to function properly. My Publisher and Subscriber are both running SQL Server 2000 Standard Edition SP3.
Thanks.
View 4 Replies
View Related
Mar 1, 2004
Hi,
I'd set up Transactional Replication btw 2 servers running on MSSQL 2000.
However, from time to time, I encounter Error 8102. I try to reinitialise the subscription but failed. After I delete the current subscription and PUSH a new one, it will works fine again.
I'm curious why this is happening as I'd already set all the tables (articles) in the subscriber to "YES, not_for_replication".
Any idea?
Thanks.
View 4 Replies
View Related
Apr 17, 2007
We need to import data from flat/xml files into our database.
we plan to do so in bulk as amount of data is huge, 2GB+
we need to do some validation checks in our code after that we create insert queries.
We have identity columns that are used as foreign keys in child tables. Question is how can I write a bulk/batch insert statement that will propogate the identity column to the child, as for all other we are creating the query in the application memory.
there are 2 parent tables and 1st table value needs to be referred to in 7 tables and second table's value in 6.
Thanks much for your help.
View 1 Replies
View Related
Jun 1, 2015
By mistake i deleted a record form prod table.
how can i enter that record back? i get this error.
INSERT INTO item_details(ItemID,Item_Name,price) VALUES(201, bag,10)
ItemID is identity column. can i disable identity column and enter and then enable using sql statement?
View 3 Replies
View Related
Jun 12, 2006
Hi,
I add new records to a table with ADO. The tables contain an auto-increment identity column. I want to retrieve the identity value after the insert operation. This works fine for SQL Server 2000. On SQL Server 2005 this only works if I use a table in the select statement. If I use a view in the select statement, ADO returns no value for the identity column, a trace with profiler shows that there is no Select @@IDENTITY statement.
What is the reason for this behavior?
How can I change this behavior in SQL 2005 so that the behavior is the same as in SQL Server 2000?
Best regards,
George
View 21 Replies
View Related
Oct 16, 2006
Hi,I have an updatable DataGrid linked to a SQLDataSource in a web site developed using VS2005. Update works fine unless a value in the existing row is Null. Only one column in the database allows nulls.Putting a debug stop in the SqlDataSource1_Updating event, I checked the parameter value in the Immediate window and got the following result:?e.Command.Parameters(16){System.Data.SqlClient.SqlParameter}System.Data.SqlClient.SqlParameter: {System.Data.SqlClient.SqlParameter}DbType: Int32 {11}Direction: Input {1}IsNullable: FalseParameterName: "@original_FiresolveJobNo"Size: 0SourceColumn: ""SourceColumnNullMapping: FalseSourceVersion: Current {512}Value: NothingIs there a property I can set to generate a suitable Null check clause for the Update statement?Many Thanks,Keith.
View 3 Replies
View Related
Jul 19, 2013
I've seen this error on several of my databases again and again this week:
Violation of PRIMARY KEY constraint 'PK_XXXX'. Cannot insert duplicate key in object 'dbo.MyTable'. The duplicate key value is (whatever number here). The statement has been terminated.
The thing is, the PK is unique, and the INSERT statement does not touch that column, it touches the other ones. So SQL2012 is the one that automatically generates the next and unique available value.
How can be possible that the value to be inserted (generated by SQL2012) is a duplicate one? By the way, this was not happening on the previous SQL2005 or SQL2008 server where the databases were being hosted.
Here's my SQL 2012 version: 11.0.3000.0 (SP1 applied). Runs on top of a Win2008R2 Cluster.
View 9 Replies
View Related
Jun 19, 2008
Hi,
I am having problem in bulk update of a sql server table haning identity column from a datatable( has no identity column) using sqlbulkcopy. I tried several approaches, but it does not show any error nor is the table getting updated. But the identity value seems to getting increased every time.
thanks.
varun
View 6 Replies
View Related
Dec 12, 2014
I run the following statement and it will not update beyond 7 million plus rows and I have about 38 million to complete. I keep checking updated row counts and after 1/2 day it's still the same so I know something is wrong because it was rolling through no problem when I initiated it. I need to complete ASAP so it's adding to my frustration. The 'Acct_Num_CH' field is an encrypted field (fyi).
SET rowcount 10000
UPDATE [dbo].[CC_Info_T]
SET [Acct_Num_CH] = 'ayIWt6C8sgimC6t61EJ9d8BB3+bfIZ8v'
WHERE [Acct_Num_CH] IS NOT NULL
WHILE @@ROWCOUNT > 0
BEGIN
SET rowcount 10000
UPDATE [dbo].[CC_Info_T]
SET [Acct_Num_CH] = 'ayIWt6C8sgimC6t61EJ9d8BB3+bfIZ8v'
WHERE [Acct_Num_CH] IS NOT NULL
END
SET rowcount 0
View 5 Replies
View Related
Jun 15, 2015
After SQL server service restart, a column which is set to auto increment jumped 1000. To fix the issue, I had to add T272 trace flag to SQL startup parameters. However, I did not see the column being reseeded after the service restart, it is still showing the 1000 jump. Am I doing something wrong?
Below the log showing the flag being added to the error log:
LogDateProcessorInfoErrorMSG
2015-06-15 22:29:53.850ServerRegistry startup parameters:
-d E:DATAmaster.mdf
-e E:logERRORLOG
-l E:DATAmastlog.ldf
-T 272
View 3 Replies
View Related
Feb 14, 2014
I am trying to Write an update string for individual partID's. I wrote this query below but it isn't populating the time to test.
SELECT 'UPDATE Parts SET = [TimeToTest]' + ' ' +
Convert(varchar, (select test From [dbo].[db_PartsCats] as c Join Parts As P on P.category = C.CatID Where PartID = 48727))
+ ' ' + 'WHERE PartID = ' + CONVERT(varchar, P.PartID)
From Parts As P
Where FRID = 0 And TimeToTest = 0 and TimeToInstall = 0 and TimeToProgram = 0 And TimeToTrain = 0 And manufacturer = 187
Order By categoryMy results:
Should get UPDATE Parts SET = [TimeToTest] 0.5000 WHERE PartID = 48871 But getting Nulls instead
View 5 Replies
View Related
Sep 9, 2015
I have a student table like this studentid, schoolID, previousschoolid, gradelevel.
I would like to load this table every day from student system.
During the year, the student could change schoolid, whenever there is a change, I would put current records schoolid to the previous schoolid column, and set the schoolid as the newschoolid from student system.
My question in my merge statement something like below
Merge into student st
using (select * from InputStudent ins)
on st.id=ins.studentid
When matched then update
set st.schoolid=ins.schoolid
, st.previouschoolid= case when (st.schoolid<>ins.schoolid) then st.schoolid
else st.previouschoolid
end
, st.grade_level=ins.grade_level
;
My question is since schoolid is et at the first line of set statement, will the second line still catch what is the previous schoolid?
View 4 Replies
View Related
Aug 25, 2006
Hi,
I'm new to SQL Server but not new to SQL because I used it with Oracle. I wonder if it is possible to do this kind of statement on SQL Server:
UPDATE TableX M
SET (M.column1, M.column2, M.column3)=
(SELECT T.column1, T.column2, G.column3)
FROM Table_Y T,
Table_Z G
WHERE join condition))
WHERE EXISTS (join condition for TableX)
Basically, I'd like to update multiple columns in one statement but for some reason I can not get it to work.
What would be the equivalent on SQL Server?
Thanks for the help,
Laszlo M
View 4 Replies
View Related
Jun 18, 2014
I am unable to update the data using record by record below scenario.
Required output:
patient will able to Admit/Re-admit multiple times in hospital, if a patient readmitted multiple times in hospital after the first visit, first visit record will get Re-admission=0 and Index=1. This visit should cal Index_Admission of that patient. using this index_admission should calculate the 30-day readmission.
Current Output:
Calculation: From index_admission discharge date to next admit_visit date,
1) if the diff is having less than 30 days, readmission=1 and Index=0
else readmission=0 and Index=1 should be update.
For checking this every time should check using the latest index_admission discharge_date.
To get this result i written below logic, but it's updating readmission=0 and Index=1 after 30-day post discharge of using first index admission.
UPDATE Readmission
SET Index_AMI = (CASE WHEN DATEDIFF(DD, (SELECT Sub.Max_Index_Dis FROM
(SELECT Patient_ID, MAX(Discharge_Date_Time) Max_Index_Dis FROM Readmission
WHERE Index_AMI = 1 AND FPR.Patient_ID = Patient_ID GROUP BY Patient_ID) Sub)
, FPR.Admit_Date_Time) between 0 and 31 THEN 0 ELSE 1 END),
[Code] ....
Expected Result:
View 5 Replies
View Related
Nov 25, 2014
I have a simple update statement (see example below) that when runs, I expect to see the number of records updated in the Results tab. This information shows up in the Messages tab; however, what is displayed in the Results tab is (No column name) 40. From where the 40 is being generated. I have tried restarting SSMS 2012, restarting my computer, turning NOCOUNT on and off.
"UPDATE TableA
SET Supervisor = 'A123'
WHERE PersonnelNumber = 'B456'"
View 4 Replies
View Related
Mar 12, 2015
I have created a Dynamic Merge statement SCD2 Store procedure , which insert the records if no matches and if bbxkey matches from source table to destination table thne it updates old record as lateteverion 0 and insert new record with latest version 1.
I am getting below error when I ahve more than 1 bbxkey in my source table. How can I ignore this.
BBXkey is nothing but I am deriving by combining 2 columns.
Msg 8672, Level 16, State 1, Line 6
The MERGE statement attempted to UPDATE or DELETE the same row more than once. This happens when a target row matches more than one source row. A MERGE statement cannot UPDATE/DELETE the same row of the target table multiple times. Refine the ON clause to ensure a target row matches at most one source row, or use the GROUP BY clause to group the source rows.
View 4 Replies
View Related
May 17, 2008
Is there a way to set a field value to the column default in an update statement?
Eg.
UPDATE Table2 SET field1 = DefaultValue
where DefaultValue is the field1 column default in the table definition.
The reason I need to do this is when I delete a record from Table1, I need to set the foreign key in Table2 to the default (I don't want to delete the record in Table2, just want to set the key to a default key). I could hard-code the default value in the stored procedure but I think that's just not clean. If I create a new instance of the DB and the default value changes, I'd need to change the stored procedure(s). Just not clean...
To avoid a drawn-out discussion, there are reasons why I can't setup a relationship between the two tables and use "ON DELETE SET DEFAULT".
Any info greatly appreciated.
View 9 Replies
View Related
Nov 14, 2013
i have a table named masterlist wherein the columns are :
name-----age------sex
andrew---19-------male
trisha---23------female
and i have also another table which is namelist that is linked to the masterlist table.. after i search for the record andrew in the table namelist..i updated andrew as 25 and sex is female..now i want reset andrew's record, same to the records that andrew has in the table masterlist..
View 3 Replies
View Related
