SQL 2012 :: How To Change Backup Replica In AlwaysOn Cluster
May 6, 2014How can we change the backup replica in Always on Cluster. I am not able to take backup because of this.
View 7 RepliesHow can we change the backup replica in Always on Cluster. I am not able to take backup because of this.
View 7 RepliesI was working on a job to send me info each morning about database file free space and was noticing some odd things when looking at the log file VLFs for one of my databases in an AlwaysOn availability group.When I run DBCC LOGINFO on the secondary replica for this database, I get what I expect and most VLFs have a status of 0 (indicating the VLFs are reusable or unused). When I run DBCC LOGINFO on the primary replica, all of the VLFs have a status of 2 (active or recoverable).
Since log backups on the secondary replica in AlwaysOn still truncate the log in the primary replica, I would expect that the VLFs in the primary replica would also be mostly in a reusable or unused state. My log file sizes are the same size on each server and my backups are completing successfully. what might be causing the VLFs on the primary replica to have a status of 2 in DBCC LOGINFO when taking log backups from the secondary replica?
I'm getting an error adding Replica to SQL AlwaysOn failover cluster in the new availability group wizard. When I enter the name of the target node (secondary replica) server and press connect, I get the following:
A network-related or instance-specific error occurred while establishing a connection to SQL Server.
The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2) The system cannot fine the file specified
The SQL Browser service is up and running on the target. I am using an Azure VM for my SQL instance. This cluster spans geographies from our on-premise site to Azure via a VPN. This is a multi-subnet cluster. I'm attempting to create a new AG from the primary replica node and the target is a node on Azure called SSASNodeAz03.
[URL]
Full error:
Connect to Server
Cannot connect to ssasnodeaz03
Additional information: A network-related or instance-specific error occurred while establishing a connection to SQL Server.
The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2) The system cannot fine the file specified
I have 2 SQL Server replicas configured on SQL Server 2012 AlwaysOn. e.g. SQL1 & SQL2.
I have configured backup job on both SQL Server with the following statement. and the job occurs every 10 minutes.
•declare @DBNAME sysname,@sqlstr varchar(500)
set @DBNAME = 'dba'
IF (sys.fn_hadr_backup_is_preferred_replica(@DBNAME)=0)
BEGIN
--Select 'This is not the preferred replica, exiting with success';
[Code] ...
I turned off SQL2 for Windows maintenance. So there is only SQL1 is online. Afterwards. I checked the backup folder and didn't see any new backup files was created after SQL2 was offline. I rerun the job. It still doesn't backup database on the Primary Replica. Then I searched on SQL Server Book online. It says
Prefer Secondary
Specifies that backups should occur on a secondary replica except when the primary replica is the only replica online. In that case, the backup should occur on the primary replica. This is the default option.
According to what it says, it should backup on the Primary Replica.
I have an AlwaysOn Availability group configured between 2 nodes (Synchronous)
Automatic failover was working fine until recently
I can failover between the nodes manually but automatic failover doesn't seem to be working. In my earlier test, I would shut down the SQL Service on the primary and within seconds, the secondary replica would take over. Recently I have performed the same test and the secondary replica enters the resolving state and the DB in unavailable.
I have tried everything here: [URL] ....
The only change I made was changing the availability mode from Synchronous to Asynchronous - Could that be the cause?
Looking for info on ole/requirement of primary and secondary replica under SQL Server 2012 AlwaysOn.
View 4 Replies View RelatedAfter failing over to the DR replica. All databases are out of sync. DR replicas were setup as async the other 2 are set up as sync. Is this by design. No data has been updated to any of these as they are test dbs. So all dbs should be the same, no data loss.
View 0 Replies View RelatedWhat happens when an automatic failover occurs, in a two server AlwaysOn Availability Group configuration, where the secondary replica is configured as read-only?
Will it only allow read-only connections, or will it become read-write and can accept INSERT, UPDATES and DELETES when assigned the new role as Primary?
Is it correct that adding a third server/node, that just acts as passive and should be used for automatic failover, to support true HADR, would NOT need another license .. and that licenses would only be required for the previous Primary and Secondary (Read-Only) replicas?
Setting up a test AlwaysOn Availability Group for one database.
However, whenever I restore the database to the replica server and join it, it ends up with my user account as the owner of the database.
Obviously I do not want a user account as the database owner, but since it is read-only I cannot modify it directly. If I were able to fail the AG over to the replica, I could change the owner then, but I cannot due to business requirements. this AG is to essentially serve as a replacement to log shipping.
I tried doing the backups and restores using EXECUTE AS login = 'sa', and yet it still shows up as my user account.
How many nodes can you have in a cluster with SQL 2012 alwaysOn.
I understand that availability groups are limited to 5 nodes but if you had a 10 node cluster and decided to create multiple availability groups using various nodes within the 10 nodes but never exceeding 5, is that possible?
Or is there a counter or some validation from SQL AlwaysOn that actually hard limits to a grand total of 5 nodes in a cluster?
Can we make SQL 2012 Always ON over the normal SQL Cluster 2012.
View 3 Replies View RelatedWe have an existing SQL Server 2012 Enterprise cluster with 2 nodes (active-active) and uses Windows 2008 R2 OS. We are looking for a way to increase HA as well as offload backups to secondary server and it was suggested that AlwayOn could be an option.
The questions I have are:
1) Is it possible to turn on AalwaysOn feature on an existing cluster?
2) If yes to above, does the secondary replica need to exist as a node on the same cluster or can it be on a completely different cluster?
3) If the secondary replica is on the same cluster (i.e. we add a 3rd node to existing 2 node cluster), can that node be provisioned with storage from a completely different SAN? (i.e. Node 1 and Node 2 accesses LUNs on SAN1 and Node 3 accesses LUNs on SAN2).
When I fail an availability group between subnets, I am finding that the DNS entry in DNS is staying. So what happens is the Availablity Group listener has 2 records in DNS, one for each IP. This causes the App to timeout at times, since DNS will return either of the two IP's.
View 9 Replies View RelatedWe are implementing a multi-site (Windows Server Failover Cluster) WSFC to enable Always On between our primary and DR site. We are not going to use SQL clustered instances. We are not planning to use shared disks. Each node is running a standalone instance of SQL 2012.
I have successfully configured a 3 node multi-site Windows failover cluster with no shared storage. For quorum, I have defined a File Share Witness (FSW). The FSW has voting rights and is in the DR site. The setup looks like this –
WSFC –
•Node A – Site #1 (voting right = 1)
•Node B – Site #1 (voting right = 1)
•Node C – Site #2 (voting right = 0)
•FSW – Site #2 (voting right = 1)
Again - There are no shared disks in our setup. We are not going to use SQL clustered instance. We are going to use Always On with these 3 nodes.
SQL Always On –
•Node A – Site #1 (Primary Replica)
•Node B – Site #1 (Readable Secondary)
•Node C – Site #2 (Readable Secondary)
All the setup including the “availability group” works properly under this setup. However, a failover to site #2 under DR situation is not working and I know why but don’t know what needs to be done to fix the problem.
The following works fine –
•Automatic failover between nodes A and B (same site – site #1)
•Forced failover to node C in site #2 provided at least one of the nodes in site #1 is up (non – DR situation) - this will ensure the cluster is up
The following is not working –
•Forced failover to node C in site #3 when both nodes in site #1 are lost (true DR situation) – This is because the cluster is not up at this point.
I know I have to bring the cluster up somehow and I have not been able to do so by restarting the cluster service.
I tried to run the command to start cluster service.
Question –
How can I FORCE the cluster to come up in Site #2 on node C when it has no voting rights?
I have always worked with even number of nodes and shared disks with traditional clustering. I am not sure what needs to be done in this scenario with 3 nodes and a FSW.
How can we find the cluster failover count in always on ?
As my AG is configured as synchronous mode , AG went offline and we manually restarted the AG service when we check the properties on AG role they r in default setting ?
I know now that AlwaysOn feature HAS to be installed/configured on a Windows Clustering environment, BUT the secondary replicas, like the Disaster recovery replica residing in a different Data Center HAS to be also in a Windows Clustering environment or can it reside on a SINGLE SQL Server INSTANCE?.
View 6 Replies View Relatedis there any limition in AlwayOn to add database in secondary replica?
View 2 Replies View RelatedI'm setting up my first pair of Sql 2012 servers using AlwaysOn. I set up backups to run on the primary and I understand that you can set up backups to run on both the primary and secondary servers but the secondary will fail. Is there a way I can stop the secondary server from sending out error messages about failed backups? Is it possible to script it so that the server looks at whether it's primary or secondary and turns on or off alerts based on that?
View 8 Replies View RelatedWe have just implemented a SQL 2012 always on environment. We have a primary and secondary server. I am confused about how to set up the backup plans. The application team was happy to tell me that in sql 2012 always on we can offload the backups to the secondary, thus reducing overhead on the primary server.
However, the secondary only supports copy only full backups. I am unsure how these would be useful in a disaster event? I could not apply any trx log backups on a copy only backup. This means I need to run my full backups on the primary server?
I am trying to implement a read only replica to move much of the data read for an application to the secondary replica. Initially I had the the primary and secondary set to asynchronous commit. QA brought up an issue with creating entities from the application because after the creation of an entity the application turns around and repopulates the entire aggregate object. Well it seems that the application was reading the secondary replica before the data had been committed. Although I understand the issues that synchronous commits can cause, I went ahead and made the change as I expected it to fix the issue. After changing the primary replica to synchronous we still had the error, so I also changed the secondary although that makes no since, but the issue remains.
View 5 Replies View RelatedI would like to setup replica for one of the databases for reporting. The current environment is a 2 node cluster(active/passive). I would like to add a 3rd node that can server as a secondary replica. The secondary replica will be on asynchronous commit mode.
The database that needs to have alwayson setup has column level encryption enabled.
Other Questions,
* Do I need to backup and restore the service master key on secondary server in order to have the column level encryption to work on secondary server?
* What would be preferred Quorum settings?
* What is the setting for 'readable secondary' for primary and replica db?
* What should be the setting for 'Connections in Primary Role' for primary and replica db?
* We are trying to setup without a Listner. Do I need to setup AG Listener? Can the application exclusively use the [secondary instance name].[replica DB name] without a listener?
We have a 2 node clustered instance(SQL 2014) with 26 databases and we would like to enable alwayson for one of the databases for reporting (only one secondary and do not need high availability setup). I'm thinking if the reporting application/queries can explicitly connect to the secondary database(Instance namedatabase name) without using a listener and setup the secondary in asynchronous commit mode. Read about the REDO thread blocking due to reporting workload. How does this affect if I implement the secondary in this way.
View 3 Replies View RelatedHaving an annoying AG/AO problem with the read only routing side of it.
Let me give some specifics first:
2 SQL Server Instances, Not Clustered.
Availability Group is named 'Ireland'
There is a primary Replica and a Secondary Replica, named:
'IrelandPrimary' and 'IrelandSecondary'
There is a listener configured with the name 'ListenIreland' on Port 14330 (the two 3's are correct)
Read Only Routing URLS are configured as follows:
IrelandPrimary tcp://Ireland.dom.local:49891ALL
IrelandSecondary tcp://Ireland.dom.local:49841ALL
So now my problem:
When I try to connect using the ApplicationIntent=Readonly; or even using -K ReadONLY in sqlcmd I get the error telling me that my connection was actively refused.
This is connecting to the Listener, not the instance itself - that works fine. I'm at a bit of a loss now.
To explain what I am trying to achieve is a for a connection to be redirected to the secondary replica when its set for read-intent.
I've just noticed that it only fails when I specify ApplicationIntent=ReadOnly; If I omit the Intent It connects to the read-write database instead.
We are currently using 2008 environment. We do have an SSIS Package running. The package used to run everyday and take the production server full backups and restore into the another server. Then do some delete commands and do some updates in that database on that server (We have some sensitive data other than Production we have to run that scripts in any environment). After run all those delete statements another team will read the data from that database.
We are planning to migrate to 2014 and set up always on and use the replica as the source. In this case how the package will work?
How to change that SSIS package. With the 2014 always on we are directly reading the data there is no backups to restore then how to run the delete statements?
We have always on setup in our environment with read only replica. The primary database has 2 schema one is a dbo and other xyz. We have some store procs created in dbo schema and xyz schema. These store procs are being used by SSRS reports to retrieve the data (select only) no data changes will be made.
when we run the store proc from the read only server the storeprocs in the dbo schema run fine but xyz schema are failing with the message saying failed to update the database as this is a read only...
Here are my scenarios:
We have an application with replicated environment setup on sql server 2012 . Users will have a replica on their machines and they will replicate to the master database. It has 3 subscriptions subscribed to the publications on the master db.
1) We set up a replica(which uses sql server 2012) on a machine with no sql server on it. After the initial synchronization(used replmerge tool) the mdf file has grown to 33gigs and ldf has grown to 41 gigs. I went to sql server management studion . Right click and checked the properties of the local database. over all size is around 84 gb with little empty free space available.
2) We set up a replica(which uses sql server 2012) on a machine with sql server 2008 on it. After the initial synchronization(used replmerge tool) the mdf file has grown to 49 gigs and ldf has grown to 41 gigs. I went to sql server management studio , Right click and checked the properties of the local database. over all size is around 90 gb with 16 gb free space available.
3) We set up a replica(which uses sql server 2012) on a machine with sql server 2012 on it. We have dropped the local database and recreated the local db and did the initial synchronization using replmerge tool. The mdf file has grown to 49 gigs and ldf has grown to 41 gigs. I went to sql server management studio , Right click and checked the properties of the local database. over all size is around 90 gb with 16 gb free space available.
Why it is allocating the space differently? This is effecting our initial replica set up times.
How to change the sql service passwords on a SQL 2012 cluster.
View 3 Replies View RelatedBackground information: SQL 2014 Ent. highly volatile OLTP environment. We generate 10 - 12 GB compressed transaction log backup files every 15 minutes.
Currently - we have two-node A/P cluster residing on flash array. Need to leverage AlwaysOn to offload processing. Replica server with have Flash storage. Replica node has same CPU and memory footprint. 10GB connection between nodes. Anyone generating such large transaction log for 15/30 minute time period?
We have 2 node sql 2012 cluster and we have a scenario where domain,IPs,Hostanmes and SQL network name are changing.
1> Can SQL cluster role be brought online by changing the sql network name and its IP once windows team reconfigure the OS cluster or there will be any challenges.
2>should I uninstall sql cluster on both nodes then windows will destroy OS cluster and they then they need to change IP,hostname and domain and then fresh installation of sql cluster
Can we backup a DB from SQL Server 2012 (Ent. edition) two node cluster to a local disk ?. Is it possible ?
View 7 Replies View RelatedCan we backup our cluster databases directly to tape using native backups (without using any third party tool) ? It's SQL Server 2012 two node Active/Passive cluster. One of the DB will be huge in size, hence checking if we can directly backup from the cluster instance to a tape.
View 7 Replies View RelatedWe are planning to change all IPs of PRODUCTION Failover Cluster Setup. In my cluster setup ... we have 2 Physical Nodes with windows-2008, Roles are MSDTC and SQL-2008R2.
IP change for:
1. Both Nodes(Physical)
2. MSDTC
3. SQL Server
4. windows Cluster
So Almost... All IPs are going to change.
Im DBA here, I need to take care of SQL cluster and MSDTC. But I haven't performed this activity before.So I'm worrying about Impacts and consequences of this change. steps how should I perform this activity.
My environment has a 4 node cluster , 2 in primary and 2 in sec dc. Storage is sperate for both.
Need to setup always on for 4 Instances there on the 2 nodes of the primary dc. Is there any restriction in setting up always on for multiple instances for a cluster.