SQL 2012 :: How To Change File Path From C Drive To E

Oct 22, 2015

How do I change the file path from C: drive to E:

See attached

View 2 Replies


ADVERTISEMENT

Secondary File On Encrypted Drive Path

Jul 6, 2007



We have an encrypted drive (that can be mounted and dismounted, a third party tool to encrypt drive path). I wanted to store the secondary file to that encrypted drive path. The secondary file stores confidential information. I separated the table from the primary to secondary file. Encryption per column is not advisable to do on that table so we decided to separate that table and put it on secondary filegroup. The physical file is stored in the mounted drive path.



I can read and write in that mounted drive path. I can also read and write if the drive is unmounted (which I believe read and write is really being done). When the drive is unmounted, the physical secondary file (.ndf) is not visible to any user logging in the server itself (this is actually the goal why we do this encrypted drive setup thing). It is kept virtually somewhere in the machine. To mount it back, a password is needed.



I'm a bit confuse, somebody can advise or give their insight on this setup. I believe that when the drive is dismounted, SQL Server stored the transactions in cache until it finds that the drive is mounted back. This means that all transactions are not comitted yet. When the drive is mounted back, I think SQL Server is smart enough to check/know that the drive is physically present and will flash all the pending transaction from the cache to the hard drive.



Is my assumption correct? Is there any thing that I need to know about transaction, committed and those data flashing thing on the hard drive?



Thanks in advance....





View 4 Replies View Related

SQL 2012 :: Deadlock Information And File Path

Sep 9, 2014

I have enabled 1222 and 1204 trace and restarted sql server. then i have replicated deadlock in my local.

This is the error came in sql

Msg 1205, Level 13, State 45, Line 1

Transaction (Process ID 51) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.

Then i opened ERRORLOG file , there is no information about deadlocks .

Where can found deadlock information and file path. is there any extra options required to enable trace?

DBCC TRACESTATUS(1222,-1)

TraceFlagStatusGlobalSession
1222110

How to find location trace log?

View 9 Replies View Related

SQL 2012 :: Converting Directory File Path Into HierarchyID

Jul 22, 2014

I am trying to create hierarchyID for a directory file path.

View 1 Replies View Related

SQL 2012 :: XMLA Script To Save File To Remote Drive

May 20, 2015

I am trying to run XMLA script to save .trc file to remote drive.

Anytime I try to save file it save it to the local drive where SSAS instance is installed.

Here what I am using it within XMLA script

<LogFileName>c:TraceTraceFileName.trc</LogFileName>

How can I save it to my local (c drive) or remote server

View 0 Replies View Related

SQL Server 2012 :: Bulk Insert Using UNC Path Of File Table Directory

Jul 22, 2013

Overall goal: Write a Bulk Insert statement using the UNC path of a filetable directory.

Issue: When using the UNC path of the filetable directory in a Bulk Insert Statement, receiving "Operating system error code 50(The request is not supported.)" Looking for confirmation as to whether this is truly not supported.

Environment: SQL Server 2012 Standard. Windows Server 2008 R2 Standard

View 9 Replies View Related

SQL 2012 :: How To Fetch Single File From Local Path Using SSIS Package

Nov 14, 2014

I have 15 Dealers files .With the Files name as follows

1. ''ACTEST00001_20141112_0408_INV.TXT''

2. ''ACTEST00002_20141112_0408_INV.TXT''

I will get these files through FTP on Daily basis with changes on date alone.

I will have 4 files for each dealers.like INV,SERVICE,SALES,APPOINTMENT.

SO i need to fetch a particular dealer with particular date.

I need to create this scenario in SSIS package. How to create this and what are all the Tasks i need to use to implement this process.

View 1 Replies View Related

SQL Server 2012 :: View To Concatenate File / Path Names Back To Root Directory?

Sep 25, 2014

We have a hierarchical table of some 2-3k of rows that grows slowly at only 3-5 rows a month, and is never likely to be above 5k, holding file/directory names with an IdParent int value pointing at that items immediate parent or NULL if root

Below is a sample:

Id Name IdParent
1 C: NULL
2 D: NULL
3 ProgramFiles 1
4 DataFiles 2
5 Excel.EXE 3
6 MyDataList.CSV 4

iterative code required to achieve the result I am looking for is best handled in the Application layer, but in this case the design brief is that we must get our results back as a View. Speed of execution and code clarity are secondary 'icing on the cake' issues.

I have tried recursive CTE's and XML FOR solutions but without success, and while I feel the latter is probably the best all rounder the searches I have made and the examples I have read do not seem to solve this particular issue.

Even to find the starting point of the search tree (i.e. the .EXE and the .CSV items) was difficult because the final slash is optional in some of the rows (.e. row 4)

The end result of my view on the above data should return:

Id FilePath
5 C:ProgramFilesExcel.EXE
6 D:DataFilesMyDataList.CSV (note the adding of the missing delimiter between DataFiles and MyDataList)

View 5 Replies View Related

With New Hard Drive- Error 3: The System Cannot Find The Specified Path

May 5, 2006

Installed SQL Server 2000 Enterprise trial a week ago on XP Pro. Installed new Seagate 80G HD; used Seagate's utility to copy old C: to new drive as new boot drive. All seems to work fine, except, when booting up, SQL server doesn't start. When I try to start it manually I get the following:

Could not start SQLSERVER service on the local computer. Error 3: the system cannot find the specified path.

1. What could be wrong?

2. How do I fix it?

View 9 Replies View Related

How To Move A Log File From &#39;e&#39; Drive To &#39;f&#39; Drive....

Nov 9, 2000

I am trying to move a log file from one drive to another.

What I have done is add another file to my file group. So now my log has a file on the 'e' drive and one on the 'f' drive. I now want to remove the file on the 'e' drive. I have emptied the file on the 'e' drive. When doing the command:

ALTER DATABASE Uniprodruntime
REMOVE FILE m_rk_runtime_log

I get the following error message..

Server: Msg 5020, Level 16, State 1, Line 1
The primary data or log file cannot be removed from a database.

I have also gone into enterprise manager and tried to delete the file and it does nothing.

Has anyone run into this?

View 2 Replies View Related

SQL 2012 :: How To Backup Half Of DBs From A Server On C Drive And Other Half On D Drive

Jan 16, 2015

How to backup half of dbs from a server on C drive and the other half on D drive and vice versa, first half on D drive and other half On C drive using only one job and one stored procedure??

Using scheduling from job add 2 schedules to the job so first schedule backup first half to C and second half to D , the second schedule backup first half to D and second half to D.

View 1 Replies View Related

Change Unc Path On Sql

Oct 10, 2006

I have a question on how to change a hyperlink path. I have an ADP that has our scanned files linked to it the path is on SQL server. The problems is that we are migrating sql server and the files to their own seperate server,
\gcfs01databaseBackgroundsSCANNED ACROBAT DOCUMENTS (BACKGROUNDS)SCANNED ACTIVE FILES5630.pdf

The server is called \gcfsql Instead of gcfs01.
does anyone know how we can change the unc path to gcfsql without

\gcfsQLdatabaseBackgroundsSCANNED ACROBAT DOCUMENTS (BACKGROUNDS)SCANNED ACTIVE FILES5630.pdf

Any help would be greatly appreciated

View 8 Replies View Related

When I Change The Path Of Database

Mar 26, 2007

hello

when i change the database path or sub directory then

i can not open it directly. and the computer is restart again.

what i do becasue all time if some error occur the pc is restart?

give me any idea

View 1 Replies View Related

Change Default Database Path

May 26, 2006

Hi:
I'm using SQL SERVER 2005 EXPRESS
My server name is SERVER1SQLEXPRESS
When I create a new data base on my server  it saves at
C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData
How Can I change this default path?
Thanks!!

View 2 Replies View Related

Primary FilesGroup Change Path

Apr 28, 2006



I want modify the path Files of 'Primary' FilesGroup when DataBase is create.

The smo create a default 'primary' FilesGroup when DataBase.Create().

After database is create the path 'primary' FilesGroup' was not change.

Thats possible?

Dim srv as new Server ("SQL instance")

Dim db as new DataBase (srv,"DataBaseTest")

--> how code for modify the FilesGroup 'primary' and the files path?

db.create()



Thanks,

Marsenne

View 1 Replies View Related

Change Part Of A Path To Lowercase In Script

Jun 27, 2014

I instance where customers want to migrate SQl dB to a new server. I want to change part of the path to lowercase.

The part to be change is always a computer name i.e. ComputernameDatareportA24440 testUser.doc I want to define the computername and the script changes only the computername to lowercase

Using
Update Table
set Path =LOWER(Path) -- etc.
Go

Changes all the path to lowercase,

Note the Computername will always be different depending on the customer. The reason for changing the PCname to lowercase each client can type the PC name in various ways

i.e. Texdom, servicedom, XDB-XDE-46

View 5 Replies View Related

How To Change Default Path For Database Creation

May 1, 2007

Hi,
In my system, for creating a databae the default path is in C: drive, but iwant to change into D: drive as a default path.Please tell me how to change??

View 10 Replies View Related

SQL Change Stored Path To Documents Query

Jun 22, 2007

I need someone that knows something about SQL queries.

I have a client that is running a Database known as ProLaw. It is in part a
document management system for Law Offices.

They have an SQL 2005 database that tracks per client all the documents they
create.

We had to replace there server with new server. The new server is running
sbs2003 and had to have a different Netbios name then the old sbs2000
server. (Small Bus. Server has some weird quirks that make simply using the
same netbios name impossible. Google search it if you don't believe me.)

The database holds in a single column the full network share path to each
document.

A document for example may have had a path of

"\lawwillsbs2000ProlawDocumentsACME wigets Incsmith_deposition.doc"

Different documents may have different names and more subdirectories but the
root path of "\lawwillsbs2000ProlawDocuments" is shared by all.

The new server is named \sbs2003 I need to change
the first part of almost 3000 path statements to the new server. The rest
of the path is unchanged.

I have had several people running prolaw tell me that I should run this
query:

UPDATE Events

SET DocDir=REPLACE(DocDir, '\\lawwillsbs2000', '\\sbs2003')

WHERE EventKind='O'

This doesn't work. Nothing is changed. I'm guessing it is because this
query assumes the value will be ONLY \lawwillsbs2000 I see nothing in here that tells the query that this is only part of the string. No wild card or other marker.

I need some kind of string function here do I not? Anyone know enough to
help me craft a proper query?

Thanks

Nathan Williams

View 3 Replies View Related

Server 2008 Instance Path Change

Jul 3, 2015

Currently we have SQL instance on C:  drive.We are now going to upgrade SQL Server 2008 RTM to SQL 2008 SP4.Can we change the path of SQL instance during upgrade?What services need to be stopped during upgrade.

View 2 Replies View Related

How To Change Default Installation Path For SQLCE

Feb 1, 2007

Hello,

My WinCE device loads the Windows folder from NAND falsh on start-up and therefore I cannot install SQL into WindowsProgram files.

I would like to deploy SQLCE apps and dlls (from VS2005 or CAB file) into my NAND_Flash directory but I don't know how to do it.

Thx,

Uri

View 3 Replies View Related

Single Command To Change The Backup Device Path

Feb 29, 2008



Hi guys.

acutally my network dept. has change the backup file server IP address.. i m now hving problem for taking backup.
i have around 85 backup that runs everyday.. what i m doing now running every single command to drop backup device and then adding again.. but it's taking agess to do..

is there any simple script that just update the device path folder..

Thanks and looking foward.
-MALIK

View 6 Replies View Related

Recovery :: Log Shipping Primary Backup Path Change

Sep 25, 2015

I want to redirect the logshipping primary backup folder to another drive, how to change the configurations steps to move the primary logship folder to another location within the same server!

View 2 Replies View Related

How To Change The Data Path Specified In The SQL Server (MSSQLSERVER) Service Properties?

Apr 18, 2007

I have connected to the SQL Server 2005 instance usign the SQL Server Management Studio; I have changed the default locations for the database and log files. I have also rebooted the machine. When I look in the SQL Server Configuration Manager in the properties for the SQL Server (MSSQLSERVER) I see that the data path is still set to the old value and this field is read-only. How can this can changed without going through the registry?

View 10 Replies View Related

File System Task Error When Using SQL Server Agent (when Move File On Network Drive)

Jun 8, 2007

I am able to run SSIS packages as SQL Server Agent jobs with a Control Flow items "File system task", if I move a file (test.txt) from a drive (c on the server (where SQL Agent jobs run) to a subdirectory on the same drive. But, if I try to move a file on a network drive, the package fail.



What I can do to solve this issue.



Bye!

Daniel

View 1 Replies View Related

SQL 2012 :: Change Minimum Permissions To Allow Read Access To Change Tracking Functions

May 12, 2015

Trying to determine what the minimum permissions i can grant to a user so they can see the change tracking data

View 1 Replies View Related

Reporting Services :: Parsing SSRS Config File And Dynamically Changing File Path Of Config File In Code

Sep 2, 2015

Currently have a single hard coded file path to the SSRS config file which parses the file and provides the reporting services web service url.  My question is how would i run this same query against 100s of servers that may or may not share the same file path as the one hard coded ?

Is there a way to query the registry to find the location of the config file of any server ? which could be on D, E, F, H, etc. 

I know I can string together the address followed by "reports" and named instance if needed, but some instances may not have used the default virtual directory name (Reports).

Am I going about this the hard way ? Is there a location where the web service url exists in a table ? I could not locate anything in the Reporting service database. Basically need to inventory all of my reporting services url's.

View 2 Replies View Related

File System Task - Move File With Dynamic Destination Path

Oct 9, 2006

I am having an issue with the File System Task.

I was wondering if there is a way to 'Move File' with the File System Task inside of a For Each Loop container but to dynamically set the Destination path variable.

Currently, this is what I have:
FileDestinationPath variable - set to C:TestFiles
FileSourcePath variable - set to C:TestFiles
FileNameAndLocation variable - set to blank

For Each Loop Container €“ Iterates through a folder C:TestFiles that has .txt files in it with dates in the file name. Ex: Test_09142006.txt. Sets the file path (fully qualified) to the Variable Mapping FileNameAndLocation.

Script Task (within For Each Loop, first step) €“ Sets the FileDestinationPath to the correct dated folder within C:TestFiles. For example, if the text files I want to move are for the 14th of September, it takes FileDestinationPath and appends the date folder to the end of it. The text files have a date in the file name (test_09142006.txt) and I am picking this apart (from FileNameAndLocation in the For Each Loop) to get the folder date. (dts.Variables(€œUser::FileDestinationPath€?).Value = dts.Variables(€œUser::FileDestinationPath€?).Value & €œ€? Month & €œ_€? & Day & €œ_€? & Year & €œ€?) which gives me €œC:TestFiles9_14_2006€?.

File System Task (within For Each Loop, second step) €“ This is where the action is supposed to occur. I want it to take the FileDestinationPath and move the FileNameAndLocation file (from the For Loop) into this folder for each run.


Now as for my problem. I want this package to run everyday but it has to set the FileDestinationPath variable dynamically according to that day€™s date. Basically, how do I get this to work since I can€™t hard code the destination path variable from the start? I have the DestinationVariable on the File System Task set to the FileDestinationPath variable, after the script task builds it. However, using FileNameAndLocation as the SourceVariable on my File System Task tells me that the €œVariable €œFileNameAndLocation€? is used as a source or destination and is empty.€?

Let me know if I need to clarify further€¦...I may be missing something very simple. Any help would be greatly appreciated!

View 10 Replies View Related

Integration Services :: Network Path For Flat File Destination - Cannot Open Data File

Apr 6, 2015

I am running my package in sql server 2012, in which i am giving network path for flat file destination. And its working fine. But if i give m local path, its giving me  error " cannot open data file" ...

Nothing is wrong with package.

View 10 Replies View Related

File Name Includes File Path In DTS Send Mail Task - Help

Jan 26, 2004

I have an issue with a DTS package. We create a zip file and then attach it to emails going out using DTS. The problem is that the attachment, when received, is named using the full path to the file, so it is quite long.

Has anyone seen this before? Is there a way out of this?

I am considering mapping a drive to the share holding the file to be named, but the fact is this will shorten the name but will still result in the path being included.

I am wondering if this is a bug, as I suspect this isn't the default behaviour.

Thank you in advance.

Dave

View 5 Replies View Related

Config File Path Not Being Updated In The Dtsx File While Deployment

Sep 21, 2006

Hello All,

I experienced a weird error while deploying my SSIS package. After running the manifest file, i noticed that one of the configuration file's path was not updated in the dtsx file. My solution has 8 packages and almost every package has 2 configuration files. Except 1 file every other config file's path is being updated. Has anybody experieced such a problem?

Thank you in advance for your help

Sumesh

View 1 Replies View Related

SQL 2012 :: Fusion-IO Drive And MDB Files

Nov 5, 2014

We have a cluster with two nodes and two instances of SQL Server 2012 Standard Edition running on them. Volume W: is a Fusion-IO card.

On one of these nodes a lot of database names are showing up in the resource monitor as *.mdf files (W:0MSSQL1…).

How and why SQL Server is using these files? They only show up on one of the nodes having more load.

Volume I: is the volume where the transaction log is written so we can explain these files.

View 3 Replies View Related

Log File Path In Configuration File Does Not Work.

Jan 25, 2007

Hi,

I cannot get the log file path read from the configuration.

If the path in the Connection Manager is invalid, package throws an error "SSIS logging provider has failed to open the log" instead of reading it from the config.file.  What am I doing wrong?

Here is the portion of the config file. Everthing else is read from the config file correctly.

- <Configuration ConfiguredType="Property" Path="Package.Connections[SalesforceConnectLog].Properties[ConnectionString]" ValueType="String">  ConfiguredValue>D:APPSBACIARSalesforceConnectSalesforceConnect.log</ConfiguredValue>

  </Configuration>

Appreciate a help.

Gulden

View 6 Replies View Related

SQL 2012 :: Swapping Drive Letters In Cluster

Jul 3, 2015

As part of a migration of data to a new SAN I have hit a bit of a snag in the migration. In summary what will happen is user database data files will be moved from one LUN (say drive F:) to a new LUN (say drive G:). Once all the data is migrated, plan is to remove dependency of that drive from SQL server and remove the drive and delete the LUN. So far, so good.

However one of the LUNs (drive D:) destined to be deleted also hosts the instance default directories, i.e. everything under MSSQL11.MSSQLSERVER (Data, Backups, FTData, JOBS, etc). BOL has articles on how to migrate system databases, including tempdb. But there is no guidance that I could find on how to relocate other folders. There are forums where users have listed registry changes, etc that can achieve this but these are steps I am unwilling to take on a production server.

So my plan is:
1) Add new drive to cluster (drive E:), sufficiently large enough to host instance default folders
2) Shutdown SQL server
3) Copy all default folders to new drive
4) Swap drive letters so that new drive is now D:
5) Start SQL server and if everything works, delete the original drive (which is now drive E:).

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved