SQL 2012 :: How To Create Failover Cluster Using VMs
May 5, 2014How to create a SQL 2012 Failover cluster using VMs?
View 9 RepliesHow to create a SQL 2012 Failover cluster using VMs?
View 9 RepliesI am trying to create a failover cluster without the log shipping in 2012 as i've done it with a static instance with some database.Is the "AlwaysON" feature the solution when an application creates random and numerous databases within the instance and we need a failover scenario ?
View 9 Replies View RelatedI´ve been reading that SQL Server 2012 Always On is dependent on having a Windows Failover Cluster setup. Is that correct ?
View 6 Replies View RelatedI have virtualbox installed on my notebook. For testing purpose, is it possible to setup SQL Server Fail-Over cluster using virtual box? I don't have a shared storage. How can I simulate that?
View 1 Replies View RelatedI'm reading up on Always on and I am confused what is the difference between AlwaysOn Availability Groups and AlwaysOn Failover Cluster Instances.
View 3 Replies View RelatedI had a cluster running on 3 nodes (windows failover cluster) with server 2012 and SQL server 2012 running in the cluster. Well, I thought I'd just go ahead and rename all 3 of the hosts with new hostnames and it apparently broke the cluster pretty bad. Now when I open failover cluster manager I cannot see anything nor can I connect to the cluster object in AD. I re-named all of the hosts back to their original names but that didn't work.
View 5 Replies View RelatedWe are implementing a multi-site (Windows Server Failover Cluster) WSFC to enable Always On between our primary and DR site. We are not going to use SQL clustered instances. We are not planning to use shared disks. Each node is running a standalone instance of SQL 2012.
I have successfully configured a 3 node multi-site Windows failover cluster with no shared storage. For quorum, I have defined a File Share Witness (FSW). The FSW has voting rights and is in the DR site. The setup looks like this –
WSFC –
•Node A – Site #1 (voting right = 1)
•Node B – Site #1 (voting right = 1)
•Node C – Site #2 (voting right = 0)
•FSW – Site #2 (voting right = 1)
Again - There are no shared disks in our setup. We are not going to use SQL clustered instance. We are going to use Always On with these 3 nodes.
SQL Always On –
•Node A – Site #1 (Primary Replica)
•Node B – Site #1 (Readable Secondary)
•Node C – Site #2 (Readable Secondary)
All the setup including the “availability group” works properly under this setup. However, a failover to site #2 under DR situation is not working and I know why but don’t know what needs to be done to fix the problem.
The following works fine –
•Automatic failover between nodes A and B (same site – site #1)
•Forced failover to node C in site #2 provided at least one of the nodes in site #1 is up (non – DR situation) - this will ensure the cluster is up
The following is not working –
•Forced failover to node C in site #3 when both nodes in site #1 are lost (true DR situation) – This is because the cluster is not up at this point.
I know I have to bring the cluster up somehow and I have not been able to do so by restarting the cluster service.
I tried to run the command to start cluster service.
Question –
How can I FORCE the cluster to come up in Site #2 on node C when it has no voting rights?
I have always worked with even number of nodes and shared disks with traditional clustering. I am not sure what needs to be done in this scenario with 3 nodes and a FSW.
How can we find the cluster failover count in always on ?
As my AG is configured as synchronous mode , AG went offline and we manually restarted the AG service when we check the properties on AG role they r in default setting ?
I am new to SQL Server 2012 clustering.I added a new instance to one of the two nodes.when I try to move it to the other node it fails.Do I need to install it on both?If so, what options do you install on the second node?
View 7 Replies View RelatedIn QA we have a two-node cluster with four instances of sql. In trying to add a fifth, I was given an IP address already in use so the install hung.
I removed it from the cluster but it is still there in the registry etc on the node I was working on.
I read about using the maintenance tab of the sql server install to "remove a node" but the terminology is confusing. To me a node is a physical server and an instance is an instance of sql server -- not the same at all but they are often referred to as the same thing.
I definitely don't want to remove one of the servers from the cluster.
I am trying to install SQL Server 2012 onto an already configured and validated windows failover cluster (server 2012) but the process is hanging after installing the setup files.
The last entry in the log is:
running discovery on remote machine
and I've left it hanging like this for 4 hours and nothing happens.
1. Once fail over to secondary replica, what will happen to connected session in primary node? can the session fail over to secondary seamlessly or need to re-login. what happen committed transactions which has not write to disk.
2. Assume I have always on cluster with three nodes, if primary fails, how second node make write/ read mode.
3. after fail over done to 2nd secondary node what mode in production(readonly or read write).
4. how to rollback to production primary ,will change data in secondary will get updated in primary.
1. In alwaysON fail over cluster, Once fail over to secondary replica, what will happen to connected session in primary node? can the session fail over to secondary seamlessly or need to re-login. what happen committed transactions which has not write to disk.
2. Assume I have always on cluster with three nodes, if primary fails, how second node make write/ read mode.
3. After fail over done to 2nd secondary node what mode in production(readonly or read write).
4. How to rollback to production primary ,will change data in secondary will get updated in primary.
it is possible to create Linked server with Failover partner option. I can query when primary server and getting the error when I set the DB Fail over. I have tried with following script and also gone through different sources, but failed. Please see the script and error below.
EXEC master.dbo.sp_addlinkedserver
@server = N'MIRRORLink',
@srvproduct=N'',
@provider=N'SQLOLEDB',
@provstr=N'Server=primary;FailoverPartner=mirror;network=dbmssocn;',
[code].....
Hi I just set up a new cluster and everything was working. Now when I try to test failovers like unplug the public network card etc...
The cluster group fails over correctly but my data and log array's dont failover.
So I unplug the network cable from node 1 (active) the cluster group with the IP, name, and Quorum disk fails over to node 2 but the other groups sql data and sql log stay on node1 and dont failover.
Any ideas?
TIA
Hi all:
I was wondering what will happend to the transaction when the cluster failover from one node to another?
In my case the database is in node-001 and I need to restart the server on node-001. So I need to have the database failover to node-002, so I can work on node-001. During this process, will it effect to end-user?
Thanks
vua
We need to start testing our Microsoft cluster servers.
Has anyone heard of any plan or products one can use to test
the failovers?
Please advise
Thanks
Susan
We are running on SQL 2000 on Windows 2003. We have active-passiveclustering set up. We have 16 GB of RAM on each box. This pastweekend, we failed over. I noticed that the Total Server Memory wentfrom about 15.5 GB to 8 GB. I have been trying to figure out why thishas occurred. Any help would be greatly appreciated.
View 1 Replies View Related
We need to install the webservice and the database on a failover cluster. Our plan was to install the web service on node 1 and the database would naturally be on the cluster aware sql service. We know the RS will not be cluster aware and if node1 bites the dust, reports will be out of business.
We were planning to do this tommorow on development, but then found this little tidbit - read the very last paragraph
http://www.microsoft.com/dynamics/crm/using/deploy/clusteringssrs.mspx
SQL Server Reporting Services failover cluster configurations that are not supported
Do not deploy both SQL Server Report Services and the reporting services databases on each node of a multi-node cluster. Moreover, do not deploy SQL Server Reporting Services in a two-node cluster environment that consists of an active node and a passive node where the passive node becomes active during a failover.
They don't explain why not to do it - as if it will destroy your machine! This is our main dev cluster and we don't need it to go down.
We will not be installing the RS on each node, just one. But I was thinking that if the dns entry for the service points to N1, it will continue to function and make successfull DB calls to the sql server cluster name.
Could this work? I've found posts of people installing RS on both nodes and having success - but this would probably require another license...which we don't have.
Thanks so much for your help - it is greatly appreciated.
Hi all,
I need help to send notificaiton mails as soon as my active sql switch to passive one..
sp3a : 2000 Ent Ed.
windows 2003 Ent Ed.
Cluster: A/P
thanks in advance..
Regards
Deepak
Hi. Was hoping to get some advice on applying a hotfix to a SQL Server 2005 failover Cluster.
The hotfix I am applying (KB933508) relates to a Maintenance Plans issue with Server 2005 Service Pack 2. During installation I'm advised that unless the SQL Server and other services are stopped a reboot will be required, although I can still install the hotfix. However the installation is failing. There are error details in the relevant logs created in C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfix to the effect that the 'Debug' value in registry key 'SoftwarePoliciesMicrosoftWindowsInstaller' can't be read and that SQL Server was unable to add a user (the account under which SQL Server Agent and Analysis Services run) to a local group (the domain group in which SQL Server logins are contained).
Is this something simple like explicitly shutting down the services first before applying the hotfix or is there something else going on?
Regards,
YaHozna
Hello,
Does any one know, any software out there that can provide a solid failover / cluster / high availability solution for SQL Server 2000 Databases.
I have tried Incepto but it requires an extra column in every single table that involves in Replication and its not gonna work
So Please advise.
Thanks,
imransi.
I have a 2-node Windows Cluster and File Share Witness with an availability group. The cluster is set to sync and auto failover. I'm using SQL 2014 and Windows 2012R2. I'm trying to understand the steps to apply Windows Updates that require a restart. Are the steps something like this where ServerA is the primary replica and ServerB is the secondary replica.
Apply updates to ServerB.
Restart ServerB.
Fail ServerA availability group to ServerB using ALTER AVAILABILITY GROUP MyAvailGroup FAILOVER;. Server B is now the primary.
Apply updates to ServerA.
Restart ServerA.
Fail ServerB availability group to ServerA using ALTER AVAILABILITY GROUP MyAvailGroup FAILOVER;. Server A is now the primary.
What I don't understand is where Drain Roles on the Failover Cluster Manager fits in?
We have 2 nodes window Server 2012 R2 and SQL Server 2012 Enterprise Version cluster setup. We can switch roles and Node to one node to another and revert back to previous node with out any issues. But we are facing when one Node is restarted. We could not restart that Node in cluster Service start in Failover cluster Manager. Error Details is displayed as below inside double code."Cluster node NODE1 could not to join the cluster because it failed to communicate over the network with any other node in the cluster. Verify the network connectivity and configuration of any network firewalls."
I checked windows firewall. windows firewall is all of in Node1, Node2, SAN and DC.I have disabled and enabled the Internal and private network of Node 1. I have validated the cluster. it is showing no error though.
Node1:
Public IP: 10.10.0.11
SubNet Mask:255.255.255.0
Default Getway: 10.10.0.1
Prefered DNS: 10.10.0.10 (Ip of DNS)
[code]....
Private Network: Not configured.pinging to each other ip is successful from one node to another.
I noticed in installing a SQL2005 failover cluster instance,that it is not necessary to install on both servers. Installing on the primary node automagically installs to the secondary node. Does this constitute a COMPLETE install? It all seems to work. BUT this process does not intall client pieces (SSMS, for instance) on the secondary node. If you want that stuff there, do you then go to that box and just do a client install?
View 2 Replies View RelatedI am trying to install SQL failover cluster on one of my nodes so it should install sql on the 2nd node. It keeps coming back saying setup failed to start on the remote machine. When I look in scheduled tasks it is listed as could not run. Can someone please help.
View 1 Replies View RelatedHi All,I would like to set up transactional replication with failover cluster.Did anybody tried this? Does it work together? Is there anything Ishould be coutios when I set up these together? or Is there anyglitches?If somebody helps me I will really appreciate itThanks
View 1 Replies View RelatedI have a mystery that I need a little help with. I am trying to install SQL Server 2005 Std Ed. into a two node failover cluster running on top of Windows Server 2003 Enterprise Ed.. I have the cluster up and running. It consists of an IP address, cluster name, a shared drive (E:), and an MSDTC resource. When I run the SQL Server 2005 setup, the failover cluster option is always grayed out. I have tried installing from the active node and from the cluster virtual server. The result is always the same, no option to install a failover cluster. Some suggestions would be appreciated. I have read all the online docs I could find related to SQL 2005 failover clusters and found no clue.
Thanks,
VARiflesmith
We have sql server 2005 installed locally on 2 servers and want to set up failover clustering. Do we need to uninstall what we have then install as failover cluster? Thanks.
When trying to install SQL 2005 as a failover cluster in a Windows 2003 64 bit SP 2 cluster, I receive the following error when trying to select the installation path after choosing to install as a failover cluster.
_________________________
TITLE: Microsoft SQL Server Setup
------------------------------
The drive specified cannot be used for program location. Program files must be installed on a valid local disk available on all cluster nodes. The valid values are
__________________________
There is a knowledge base artical that says this can be from not installing the software with an account with admin permissions on all the servers in the cluster with the 64 bit install, but the account I used is an admin on both servers.
The only thing that I can think is causing the problem is that it is setup to boot from our SAN and it is using one fabric. By default Microsoft Clustering doesnt like this, but we use the newest storeport driver and applied the registry key supplied in KB article 886569 to resolve this. I could not find any documentation showing that this would limit a SQL 2005 Failover Cluster from seeing the shared storage.
Any help would be greatly appreciated.
I am using SQL 2012 SE with clustering on Windows server 2008 R2. Now I want migrate it to windows server 2012 with minimal down time. So I want to evict the passive node and add a new node with windows server 2012 and install sql server 2012 SE on the new passive node and perform a failover(make the node with 2012 OS as active) and then evict the new passive node and add another node with windows 2012 and then do the same thing?
View 12 Replies View RelatedWhat happens to batch jobs running in a SQL Server 2000 clustered environment during the failover process?
Assuming the jobs fail during the failover process, how should they be handled?
I have a multisubnet cluster over two datacentres, a node at each site with a FS witness at a separate site.
I'm using availability groups on top of this (synchronous, auto failover)
Using any non default failover policies?
Has experiment with the File Share Witness policies? Testing my config with the default values, I find that the cluster group will failover each time I reboot or turn off the quorum server.
Is one restart in fifteen minutes enough?