SQL 2012 :: How To Insert Multiple Rows With Condition
May 19, 2015
Create table #table (id int identity , from_country varchar(20) ,
to_country varchar(20),noofdays int, datetravel datetime )
insert into #table(from_country,to_country,noofdays,datetravel)
values
('Malaysia','India',2,getdate()-99),
('India','Singapore',4,getdate()-88),
('Singapore','China',5,getdate()-77),
('China','Japan',6,getdate()-66),
('Japan','USA',7,getdate()-55)
select * from #table
I want to insert data to another table based on "noofdays" columns. If "noofdays" is 4 then 4 rows should inserted to new table with 1 day increment in "datetravel" column.
Ex :
#table
1MalaysiaIndia22015-02-09 02:04:09.247
2IndiaSingapore42015-02-20 02:04:09.247
[code]...
In #table , 1st row noofdays is 2 , so in new table #table_new first 2 rows should inserted with 1 day increment in "datetravel" column.
I create a Trigger that allows to create news row on other table.
ALTER TRIGGER [dbo].[TI_Creation_Contact_dansSLX] ON [dbo].[_IMPORT_FILES_CONTACTS] AFTER INSERT AS
[code]...
But if I create an INSERT with 50 rows.. My table CONTACT and ADDRESS possess just one line.I try to create a Cursor.. but I had 50 lines with an AdressID and a ContactID differently, but an Account and an AccountId egual on my CONTACT table :
I have created a trigger that is set off every time a new item has been added to TableA.The trigger then inserts 4 rows into TableB that contains two columns (item, task type).
Each row will have the same item, but with a different task type.ie.
I have the following scenario : CustomerDetail customerid customername status app_no
[status = 0 means customer virtually deleted]
CustomerArchive archiveno [autoincrement] customerid customername status
At the end of the month, I have to physically delete customers. I have written two stored procs:
proc1 create proc spoc_startdeletion as declare @app_no int select @app_no = (select app_no from customerdetail where status=0) EXEC spoc_insertcustomerarchive @app_no -- After transferrin, physically delete delete from customerdetail where status=0
proc2 create proc spoc_insertcustomerarchive @app_no int as insert into customerarchive(customerid,customername,status) select customerid,customername,status from customerdetail where app_no = @app_no
It works fine if there is only one row with status=0, however the problem is that when there are multiple rows in customerdetail with status=0, it returns 'Subquery returned more than one value'
How can i transfer multiple rows one by one from the customerdetail to customerarchive and then delete the rows once they are transferred.
I want to count the rows in the Incident Table by using filters to limit the rows to be counted if they meet the below conditions. I know I need a logical test for each row of the incident table based on the apparatus table’s rows. But, I want to test for each row in the incident table, counting, but not returning a true or false in the overall measure.Something like look at each incident row, test for true or false and then count IF the statement is true. Then go to the next incident row and do the same. The aggregation would be the final count of “true” results.I tried this for MET objective:
I concatenate multiple rows from one table in multiple columns like this:
--Create Table CREATE TABLE [Person].[Person_1]( [BusinessEntityID] [int] NOT NULL, [PersonType] [nchar](2) NOT NULL, [FirstName] [varchar](100) NOT NULL, CONSTRAINT [PK_Person_BusinessEntityID_1] PRIMARY KEY CLUSTERED
[Code] ....
This works very well, but I want to concatenate more rows with different [PersonType]-Values in different columns and I don't like the overhead, of using the same table in every subquery ([Person_1]). Is there a more elegant way to do this, without using a temp table or something else?
Doesn't work because of parsing error. Appearantly semicolon isn't understood in commandText, although if commandText is executed in SQL Management Studio it executes flawlessly.
2) SqlCeCommand command = Connection.CreateCommand(); command.CommandText = "INSERT INTO [Table] (col1, col2) SELECT val1, val2 UNION ALL SELECT val11, val12"; if (Connection.State != System.Data.ConnectionState.Closed) { Connection.Close(); } Connection.Open(); command.ExecuteNonQuery(); Connection.Close();
Using this method i found out bug (or so i think).
I need to insert around 10000 rows of data and wouldn't want to run Connection.Open(); Command.Execute(); Connection.Close(); cycle for 10000 times.
I keep getting this error but it will only insert the 1st row into my database table The variable name '@CustId' has already been declared. Variable names must be unique within a query batch or stored procedure.
Protected Sub Button2_Click(ByVal sender As Object, ByVal e As System.EventArgs)
Dim drow As GridViewRow
For Each drow In GridView1.Rows
Dim textBoxText As String = CType(drow.FindControl("Label2"), Label).Text
Hi,i m using sqlexpress 2005 and sql management express studio. I want to know how could i insert multiple records on a single query in a table?i also want to whats wrong with this insert query?DROP TABLE IF EXISTS `tblcountry`;CREATE TABLE `tblcountry` ( `ID` int(3) NOT NULL auto_increment, `LCID` int(4) unsigned default '0', `CountryCode` char(2) default NULL, `Country` varchar(50) default NULL, `CountryInt` varchar(50) default NULL, `Language` varchar(50) default NULL, `Standard` tinyint(1) unsigned default '0', `Active` tinyint(1) unsigned default '0', PRIMARY KEY (`ID`)) ENGINE=MyISAM AUTO_INCREMENT=4 DEFAULT CHARSET=latin1 ROW_FORMAT=DYNAMIC;INSERT INTO `tblcountry` (`ID`,`LCID`,`CountryCode`,`Country`,`CountryInt`,`Language`,`Standard`,`Active`) VALUES (1,1030,'DK','Danmark','Denmark','Dansk',0,1), (2,2057,'GB','England','England','English',1,1), (3,1031,'DE','Deutschland','Germany','Deutsch',0,1);finally how could i extract the database structure and data from the sql express management studio?so that i can copy it and re use it some other computer.Thanks.Jack.
I am trying to insert multiple rows into a table getting data from a web form.
I have 2 fields being passed from a web form to the below stored procedure @FormBidlistID Sample Data --> 500 @CheckBoxListContractors Sample Data --> 124,125,145,154,156,
The below DELETE function is working great. However for some reason or another the INSERT INTO sql command is not putting seperating the string and adding rows to the database? I am not sure where the error is occuring.
In the end I need the data to go into the database columns like so
CREATE PROCEDURE dbo.UpdateBidlistContractors @FormBidlistID int, @CheckBoxListContractors varchar(3999) AS DELETE FROM BidlistContractors WHERE BidlistID = @FormBidlistID DECLARE @ContractorID nvarchar(10) DECLARE @BidlistID nvarchar(10) DECLARE @startPosition int DECLARE @commaPosition int SET @startPosition =1 SET @commaPosition = 0 WHILE (@startPosition < LEN(@ContractorID)) BEGIN SET @commaPosition = CHARINDEX(' , ' , @ContractorID, @startPosition) SET @ContractorID= SUBSTRING(@ContractorID, @startPosition, @commaPosition - @startPosition) INSERT INTO BidlistContractors (BidlistID, ContractorID) VALUES (@BidlistID, @ContractorID) SET @startPosition = @startPosition + LEN(@ContractorID) + 1 END GO
Where am I going wrong? Thank you in advance for any help. :-)
I am stuck. I have some vars being passed to an aspx page that I need to dump into a db table in multiple rows, how do I do it? I am going into a SQL database using VS.Net 2003 here's the format that the vars come in the page as: UserID = 46 k12SessionArray0interaction_id = Interaction_01 k12SessionArray0correct_response = d k12SessionArray0student_response = d k12SessionArray0result = C k12SessionArray0latency = 00:00:02 k12SessionArray1interaction_id = Interaction_02 k12SessionArray1correct_response = c k12SessionArray1student_response = c k12SessionArray1result = C k12SessionArray1latency = 00:00:02 k12SessionArray2interaction_id = Interaction_03 k12SessionArray2correct_response = a k12SessionArray2student_response = a k12SessionArray2result = C k12SessionArray2latency = 00:00:03 now here's the format of the database AnswerID | UserID | InteractionID | CorrectResponse | StudentResponse | QResult | Latency How do I insert the data to have it be mulitiple rows like: 1 | 46 | Interaction_01 | d | d | C | 00:00:02 2 | 46 | Interaction_02 | c | c | C | 00:00:02 3 | 46 | Interaction_03 | a | a | C | 00:00:03
SSMS 2012: when you open up many sql files in the IDE, it starts hiding some tabs and you have to click on the drop down at the right to navigate to the tab you want. Is there a way to make it display more than one row of tabs, so that tabs are not hidden and always displayed?
Basically if the type code is 1 one then move the data to column phone1, if the type is 2 then move it to column phone2.
This would be fairly simple if we always have type codes 1 and 2. But sometimes we can have type 1 and not type 2, or we could have type 2 and not type1.
Right now we only have 2 type codes. But, in the future we could be adding a 3rd type. So that would add a 3rd column (phone3).
Below is my code that I have written. I move the data into a temp table then list it. I am thinking of making this a view to my table. It works just fine. My question is, is there a better and more efficient way of doing this?
CREATE TABLE #Contacts ( id INT PRIMARY KEY, phone1 VARCHAR(15), phone2 VARCHAR(15) )
-- Insert the records for type 1
INSERT INTO #Contacts SELECT id, phone_num, NULL FROM test1 WHERE type_code = '1'
-- Insert the records for type 2, if the id does not exist for type 1
INSERT INTO #Contacts SELECT id, NULL, phone_num FROM test1 WHERE NOT EXISTS ( SELECT 1 FROM #Contacts WHERE #Contacts.id = test1.id ) AND test1.type_code = '2'
-- if the id has both type 1 and 2, update the phone2 column with the data from type 2
UPDATE #Contacts SET phone2 = test1.phone_num FROM #contacts JOIN test1 ON test1.id = #Contacts.id WHERE type_code = '2' SELECT id, phone1, phone2 FROM #Contacts DROP TABLE #Contacts
How I could accomplish taking several rows for one account and concatenate them into one row, for example I have account_num, invoice_date, transaction_num, msg_counter,Message_2,SQL_LAST_UPDATE the special characters &,",!,$,# are used to determine the Message_2 content for a given account_number that are supposed to be together.
I am needing to put all of that accounts_messages in one row to display on a report, the table I am pulling this data from only has a varchar(40) for the message_2, a proprietary source so can't change that length, "I'VE ASKED THEM TO DO THIS, AND THEY REFUSED". So my only option is to insert this data into my table and create a single Message_2 for that account.
00000000332015-01-16 10:09:43.00000&19 confirmation so 2015-01-19 15:34:59.000 00000000332015-01-16 10:09:43.00000"19ACCT 186743. HE SAID RADIO HAD 2015-01-19 15:34:59.000 00000000332015-01-16 10:09:43.00000!19CALLED Carl ABOUT DEACTIVATION OF RADIO 2015-01-19 15:34:59.000 00000000332015-01-16 10:09:43.00000$19FFERENT ACCT # YEARS AGO, BUT 2015-01-19 15:34:59.000 00000000332015-01-16 10:09:43.00000'19I can cancel the (0.00) billing line on 2015-01-19 15:34:59.000
I'm writing a Intranet web application to allow users to add presentation files to a web site for others to download. The presentations are to be grouped by categories, however I want them to be able to create additional categories if needed. I have created two tables.
On my web page I want to call a stored procedure to insert records into the PresentationFiles table. I have check boxes on the web form for all the possible categories that exist. A user can check each category that this presentation applies too.
In my stored procedure, how do I accomplish inserting a record for each category that is selected on the web form?
I'm guessing that I'll need to pass the categoryID's parameter into the procedure as a delimited string and then process this string for each categoryID and insert records into the PresentationFiles table using a While loop. I'm just not clear on how this is accomplished.
Any advice on how to do it differently or other resources that you can point me to is very much appreciated.
Hi,I have an application running on a wireless device and being wireless Iwant it to use bandwidth as efficiently as possible. Therefore, I wantthe SQL statement that it uploads to the SQL Server to be as efficientas possible. In one instance, I give it four records to upload, whichcurrently I have as four seperate SQL statements seperated by a ";".However, all the INSERT INTO... information is the same each time, theonly that changes is the VALUES portion of each command. Also, I haveto have the name of each column to receive the data (believe it or not,these columns are only a small subset of the columns in the table).Here is my current SQL statement:INSERT INTO tblInvTransLog ( intType, strScreen, strMachine, strUser,dteDate, intSteelRecID, intReleaseReceiptID, strReleaseNo, intQty,dblDiameter, strGrade, HeatID, strHeatNum, strHeatCode, lngfkCompanyID)VALUES (1, 'Raw Material Receiving', '[MachineNo]', '[CurrentUser]','3/21/2005', 888, 779, '2', 5, 0.016, '1018', 18, '610T142', 'K8',520);INSERT INTO tblInvTransLog ( intType, strScreen, strMachine, strUser,dteDate, intSteelRecID, intReleaseReceiptID, strReleaseNo, intQty,dblDiameter, strGrade, HeatID, strHeatNum, strHeatCode, lngfkCompanyID)VALUES (1, 'Raw Material Receiving', '[MachineNo]', '[CurrentUser]','3/21/2005', 888, 779, '2', 9, 0.016, '1018', 30, '14841', 'B9', 344);Since the SQL statement INSERT INTO portion remains the same everytime, it would be good if I could have the INSERT INTO portion onlyonce and then any number of VALUES sections, something like this:INSERT INTO tblInvTransLog (intType, strScreen, strMachine, strUser,dteDate, intSteelRecID, intReleaseReceiptID, strReleaseNo, intQty,dblDiameter, strGrade, HeatID, strHeatNum, strHeatCode, lngfkCompanyID)VALUES (1, 'Raw Material Receiving', '[MachineNo]','[CurrentUser]', '3/21/2005', 888, 779, '2', 5, 0.016, '1018', 18,'610T142', 'K8', 520)VALUES (1, 'Raw Material Receiving', '[MachineNo]','[CurrentUser]', '3/21/2005', 888, 779, '2', 9, 0.016, '1018', 30,'14841', 'B9', 344);But this is not a valid SQL statement. But perhaps someone with a morecomprehensive knowledge of SQL knows of way. Maybe there is a way tostore a string at the header of the command then use the string name ineach seperate command(??)
I have a package in which, when a Cost Center has X as a value, I must insert not X but many different Y value, which are associated with X. How can I gather and treat those Y values? Only using a Script Component?
I am needing to combine the Notes field where Number and date are the same...For example
for Number 0000000003 I need notes to Read ('CHK # 2452 FOR $122.49 REJECTED AS NSF ON 2/25/15') the note counter is different for each row, and is combination of special char, 0-Z and looks like the (!) depicts the start of a new Number.
1 ,AU-Australia 1,MM-Myanmar 1,NZ-New Zealand 1,PG-Paua New Guinea 1,PH-Phlippines
Note: we are getting source data from sqlserver tables.
I googled and found below way but did't get the output as required
SELECT A.id, a.country, Split.a.value('.', 'VARCHAR(500)') AS String FROM (SELECT id, country , CAST ('<M>' + REPLACE(country, ' ', '</M><M>') + '</M>' AS XML) AS String FROM #t3) AS A CROSS APPLY String.nodes ('/M') AS Split(a);
I am getting error when I passed multiple rows in less than condition:
create table #t1 ( ID int) INSERT INTO #t1
SELECT 1 UNION ALL SELECT 5 UNION ALL SELECT 8 CREATE TABLE #t2 (ID int) INSERT INTO #t2 SELECT 3 UNION ALL SELECT 20 UNION ALL SELECT 4
SELECT ID FROM #t2 WHERE ID < (SELECT ID FROM #t1)
Error is: Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
I am working on a project that was assigned to me that has to do with data in one of our SQL databases. I have the following query that takes information from a single table and averages test scores for each student.
--Group all scores from same student and average them together
with cte_names as ( SELECT StudentID, MAX(StudentName) AS StudentName FROM LDCScores WHERE schoolYear='2014-2015' AND term = 3 GROUP BY StudentID
[code].....
I now need to take the results from the above query and determine the percentage of students, per school that scored a 2 or greater in grade 7 for each test. For grade 8 scored a 2.5 or greater, grade 9 scored a 3 or greater, grade 10 scored a 3 or greater, grade 11 scored a 3.5 or greater, and grade 12 scored a 3.5 or greater.
In a t-sql 2012 sql script, I have the following script, that only works for a few records since the value of TST.dbo.LockCombination.seq only contains the value or 1 in most cases. Basically for every join listed below, there should be 5 records where each record has a distinct seq value of 1, 2, 3, 4, and 5. Thus my goal is to determine how to add the missing rows to the TST.dbo.LockCombination where there are no rows for seq values of between 2 to 5. I would like to know how to insert the missing rows and then do the following update statement. Thus can you show me the sql on how to add the rows for at least one of the missing sequence numbers?
UDATE LKC SET LKC.combo = lockCombo2 FROM [LockerPopulation] A JOIN TST.dbo.School SCH ON A.schoolnumber = SCH.type JOIN TST.dbo.Locker LKR ON SCH.schoolID = LKR.schoolID AND A.lockerNumber = LKR.number JOIN TST.dbo.Lock LK ON LKR.lockID = LK.lockID JOIN TST.dbo.LockCombination LKC ON LK.lockID = LKC.lockID WHERE LKC.seq = 2
A normal select statement looks like the following:
select * from TST.dbo.Locker LKR JOIN TST.dbo.Lock LK ON LKR.lockID = LK.lockID JOIN TST.dbo.LockCombination LKC ON LK.lockID = LKC.lockID where LKR.number in (000,001,1237)
In case you need the ddl statements for the tables affected here are the ddl statements:
CREATE TABLE [dbo].[Locker]( [lockerID] [int] IDENTITY(1,1) NOT FOR REPLICATION NOT NULL, [schoolID] [int] NOT NULL, [number] [varchar](10) NOT NULL, [serialNumber] [varchar](20) NULL, [type] [varchar](3) NULL, [locationID] [int] NULL,
I am trying to do the following: Insert n rows into A Table called EAItems. For each row that is inserted into EAItems I need to take that ItemID(PK) and insert a row into EAPackageItems. I'm inserting rows from a Table called EATemplateItems. So far I have something like this: (I have the PackageID already at the start of the query). INSERT INTO EAItems(Description, Recommendation, HeadingID)SELECT Description, Recommendation, HeadingIDFROM EATemplateItems WHERE EATemplateItems.TemplateID = @TemplateID INSERT INTO EAPackageItems(ItemID, PackageID) ....
I have no idea how to grab each ITemID as it's created, and then put it into the EAPackageItems right away.
Multiple rows to insert: --------------------- insert into Customer(CustomerId,Name,Value) select CustomerId,Name,Value from CustomerTemp
Trigger in Customer table that invoke a function: alter TRIGGER [dbo].[Calculation] ON [dbo].[Customer] AFTER INSERT AS
update Customer set Percentage = dbo.GetPercentage((select Value from inserted)) where CustomerId = (select CustomerId from inserted)
I'm getting the error for the multiple row.Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.Is there a way to let me insert multiple rows, using the trigger that invoke a function ?
