SQL 2012 :: How To Use RTRIM In Case Statement
Oct 1, 2015
I have a DistributorInvoiceNumber that can end with in 'R', 'A', 'CRR' or 'CR'.I am trying to write a case statement like so:
CASE WHEN RIGHT([ih].[DistributorInvoiceNumber],1) = 'A'
THEN 'ADJ'
WHEN RIGHT([ih].[DistributorInvoiceNumber],1) = 'R'
THEN 'REV'
WHEN RIGHT([ih].[DistributorInvoiceNumber],3) = 'CRR'
THEN 'REV'
WHEN RIGHT([ih].[DistributorInvoiceNumber],2) = 'CR'
THEN 'CREDIT'
ELSE NULL END AS 'Status'
For the most part the code is working, with the exception of the fields that just end in 'R'. An example of this is 471268R, 2525125901CRR, 11100325230CR
Basically if the number ends with an A, then its an Adjustment, if it ends with JUST an R, then its a Reversal; if it ends with just a CR then it is a Credit and if it ends with CRR then it is a Reversal (Credit Reversal). How can I differentiate between the different R's since three of them end with R? Would I use a RTRIM command somehow?
View 1 Replies
ADVERTISEMENT
Aug 13, 2014
i was tasked to created an UPDATE statement for 6 tables , i would like to update 4 columns within the 6 tables , they all contains the same column names. the table gets its information from the source table, however the data that is transferd to the 6 tables are sometimes incorrect , i need to write a UPDATE statement that will automatically correct the data. the Update statement should also contact a where clause
the columns are [No] , [Salesperson Code], [Country Code] and [Country Name]
i was thinking of doing
Update [tablename]
SET [No] =
CASE
WHEN [No] ='AF01' THEN 'Country Code' = 'ZA7' AND 'Country Name' = 'South Africa'
ELSE 'Null'
END
What is the best way to script this
View 1 Replies
View Related
Jun 29, 2015
SELECT
SUM(((CASE WHEN
o.date>= a.activity_date, other filter condition, other filter condition
THEN
(select coalesce(d.balance,d2.balance) from drawtable d where coalesce(d.date, d2.date) < a.activity_date order by d.date desc limit 1) - ( select coalesce(d.balance, d2.balance) from drawtable d where coalesce(d.date, d2.date) = interval 'current date'
else end ))
from
emailtable a
LEFT JOIN opportunity o
left join drawtable d
left join drawtable d2
etc
The tricky part is I'm joining that same table twice.....would this be better in a max/min case when statement?
View 9 Replies
View Related
Jul 24, 2015
I have successfully built a messaging system into my application, I now in the process of displaying the messages in the UI.
The following are how my tables are constructed.
CREATE TABLE [MailBox].[Message](
[Id] [bigint] IDENTITY(1,1) NOT NULL,
[SenderId] [bigint] NOT NULL,
[Message] [nvarchar](max) NOT NULL,
[SentDate] [datetime] NOT NULL,
CONSTRAINT [PK_MailBox.Message] PRIMARY KEY CLUSTERED
[Code] .....
Now I haven't set the foreign key on the MessageReceipient table yet. When someone sends me an email I insert a record into [MailBox].[Message] and output the insert id into MessageReceipient along with the ReceipientId this is working as expected, when I then click on my inbox I call the following stored procedure:
Select p.Username, count(mr.RecipientId) [TotalMessages],
CASE
WHEN mr.ReadDate is null then 1 -- New message
WHEN mr.ReadDate is not null then 0 -- Message has been read
END AS NewMessage
FROM [User].[User_Profile] p
JOIN [MailBox].[Message] m on p.Id = m.SenderId
JOIN [MailBox].[MessageRecipient] mr on m.Id = mr.MessageId
GROUP BY p.Username, mr.RecipientId, mr.ReadDate
This will give me the person who has emailed me, the total amount of messages and if the message is new or its been read, I do this by checking the ReadDate column as shown in the case statement (but this gives me duplicates, which is not what I want). Lets say user1 emails me 5 times so when I call this proc I will have the same user displayed to me 5 times, what I'm trying to achieve with the proc is it will show User1 as the following:
User1 5 Messages 1 or 0 New Messages
I can get it to display as follow when I remove the case statement
User1 5 Messages
but as soon as I add the case statement back in then I get 5 rows.
How can I change this proc in such a way that it will display the data as follows;
User1 5 Messages 1 or 0 New Messages
New Messages is dependent on ReadDate if its null then we have a new message, otherwise its been read.
View 3 Replies
View Related
Aug 24, 2015
I'm trying to create a case statement that if a field = a certain code, I'd like to take another field * 0.9. But, I'm getting a Null value for the answer..here is the statement:,case when parts.ndc = '50242-0138-01' then labels.BAGSDISP*0.9 end "Units Dispensed"..For this example labels.BAGSDISP is a value of 2. So, in theory it should be 2 * 0.9 and the result should be 1.8 but I'm getting a NULL
View 9 Replies
View Related
Aug 5, 2014
My table structure like below.
id date value1 value2
1 5-june-2104 Yes No
1 6-june-2014 No Yes
2 5-june-2104 Yes Yes
Want to calculate yes count on any day for same id
View 5 Replies
View Related
Sep 9, 2015
I'm trying to set up a statement that gives me a field called 'BINNO' if the payor = Commercial. But, I have a few customers that don't have Commercial. They have a Payor of Grant or Part D. How would I set up a statement that looks for Commerical 1st...then Grant or Part D. I started with this
case when inscomp.payor = 'COMMERCIAL' then INSCOMP.BINNO
View 9 Replies
View Related
Jul 9, 2014
I am selecting the count of the students in a class by suing select COUNT(studentid) as StCount FROM dbo.student But I need to use a case statement on this like if count is less than 10 I need to return 'Small class' if the count is between 10 to 50 then I need to return 'Medium class' and if the count is more than 50 then 'Big class'.
Right now I am achieving this by the following case statement
SELECT 'ClassSize' = CASE WHEN Stcount<10 THEN 'Small Class'
WHEN Stcount>=10 and StCount<=50THEN 'Medium Class'
WHEN Stcount>50 THEN 'Big Class'
END
FROM(
select COUNT(studentid) as Stcount FROM dbo.student) Stdtbl
But can I do this with just one select statement?
View 2 Replies
View Related
Nov 3, 2015
I have a stored procedure in which we are deriving some flags. So, we used series of CASE statements.
For examples
CASE
WHEN LEFT(CommissionerCode, 3) IN ('ABC','DEF',...) THEN 1
WHEN PracticeCode IN (.......) THEN 1
WHEN (CommissionerCode IN (.....) OR PracticeCode NOT IN (.....) OR .....) THEN 1
ELSE 0
END
I need to put these conditions in config table and generate dynamic sql.
What is the best way to do this? especially, 3rd condition with OR logic with multiple columns involved.
View 2 Replies
View Related
Feb 4, 2014
Below is the scenario which I have currently in my query. I need to write this query without any hardcode values , so that it will work til n number of years without modifications.
Startdate =
CASE WHEN
Trandate between '06-04-2013' and '05-04-2014' then '06-04-2013'
Trandate between '06-04-2012' and '05-04-2013' then '06-04-2012'
Trandate between '06-04-2011' and '05-04-2012' then '06-04-2011'
Trandate between '06-04-2010' and '05-04-2011' then '06-04-2010'
Trandate between '06-04-2009' and '05-04-2010' then '06-04-2009'
Trandate between '06-04-2008' and '05-04-2019' then '06-04-2008'
END
View 5 Replies
View Related
Aug 20, 2014
Is this possible, I am trying to execute a stored procedure depending on what parameter is selected, something like this????
Case
when field = 'value' then execute sp_procedure else execute sp_procedure_2 end
case
View 1 Replies
View Related
Aug 21, 2014
How I am using a CASE statement within a WHERE clause to filter data:
CREATE PROCEDURE dbo.GetSomeStuff
@filter1 varchar(100) = '',
@filter2 varchar(100) = ''
AS
BEGIN
SELECT
[Code] .
What I want, is to be able to pass in a single value to filter the table, or if I pass in (at the moment a blank) for no filter to be applied to the table.
Is this a good way to accomplish that, or is there a better way? Also, down the line I'm probably going to want to have multiple filter items for a single filter, what would be the best way to implement that?
View 5 Replies
View Related
Oct 6, 2014
I have a bit of trouble getting values into one alias field, my code is below. I am trying to get values into the alias extension, Agent_ID is sometimes null, and so is agent_id2, however sometimes they both have values in them, and then only one of the values is every returned. When in the example below only Agent_ID (11111) is ever returned by I want both of them returned.
Agent_ID Agent_ID2
11111 22222
<code>
SELECT DISTINCT
CASE WHEN [AGENT_ID] is not null then AGENT_ID
when agent_id2 is not null then agent_id2 end as extension
FROM [AA_Helper].[dbo].[tblEmpData]
</code>
View 9 Replies
View Related
Oct 14, 2014
1. I have a simple JOIN statement between A and B, e.g. Cities A JOIN Countries B:
SELECT A.City_Name, B.Country_Code, B.Country_Area
FROM Cities A
JOIN Countries B
ON B.Country_Id = A.Country_Id
WHERE B.Country_Type='ABC';
That statement works absolutely fine, very fast (less than a second) and returns me 2 records
2. I need to replace Country Area column with 1 for Europe and 0 for all the rest. I implement so in the following way:
SELECT A.City_Name, B.Country_Code, CASE B.Country_Area WHEN 'EUR' THEN 1 ELSE 0 AS Country_Area
FROM Cities A
JOIN Countries B
ON B.Country_Id = A.Country_Id
WHERE B.Country_Type='ABC';
Now to get the same two records it takes 03:55 minutes (!)
I have looked into Estimated Execution Plan, but couldn't spot any difference - all straight forward.
It is SQL 2012 SP1 with compatibility level set to 110
View 9 Replies
View Related
Apr 9, 2014
Is this a correct syntax to populate a field name PHONES in my CUSTOMERS TABLE
case when(d.phone = (SELECT phone from CALLS where exists(select home_phone, mobile, toll_free from CALLS2) Then 1 END 'PHONES'
View 1 Replies
View Related
Oct 20, 2014
I have a stored proc that contains an update which utilizes a case statement to populate values in a particular column in a table, based on values found in other columns within the same table. The existing update looks like this (object names and values have been changed to protect the innocent):
UPDATE dbo.target_table
set target_column =
case
when source_column_1= 'ABC'then 'XYZ'
when source_column_2= '123'then 'PDQ'
[Code] ....
The powers that be would like to replace this case statement with some sort of table-driven structure, so that the mapping rules defined above can be maintained in the database by the business owner, rather than having it embedded in code and thus requiring developer intervention to perform changes/additions to the rules.
The rules defined in the case statement are in a pre-defined sequence which reflects the order of precedence in which the rules are to be applied (in other words, if a matching value in source_column_1 is found, this trumps a conflicting matching value in source_column_2, etc). A case statement handles this nicely, of course, because the case statement will stop when it finds the first "hit" amongst the WHEN clauses, testing each in the order in which they are coded in the proc logic.
What I'm struggling with is how to replicate this using a lookup table of some sort and joins from the target table to the lookup to replace the above case statement. I'm thinking that I would need a lookup table that has column name/value pairings, with a sequence number on each row that designates the row's placement in the precedence hierarchy. I'd then join to the lookup table somehow based on column names and values and return the match with the lowest sequence number, or something to that effect.
View 9 Replies
View Related
Apr 14, 2015
how SQL 2012 would treat a literal string for a comparison similar to below. I want to ensure that the server isn't implicitly converting the value as it runs the SQL, so I'd rather change the data type in one of my tables, as unicode isn't required.
Declare @T Table (S varchar(2))
Declare @S nvarchar(255)
Insert into @T
Values ('AR'), ('AT'), ('AW')
Set @S = 'Auto Repairs'
Select *
from @T T
where case @S when 'Auto Repairs' then 'AR'
when 'Auto Target' then 'AT'
when 'Auto Wash' then 'AW' end = T.STo summarise
in the above would AR, AT and AW in the case statement be treated as a nvarchar, as that's the field the case is wrapped around, or would it be treated as a varchar, as that's what I'm comparing it to.
View 3 Replies
View Related
Jun 3, 2015
I have an Address column that I need to Substring. I want to remove part of the string after either, or both of the following characters i.e ',' OR '*'
Example Record 1. Elland **REQUIRES BOOKING IN***
Example Record 2. Theale, Nr Reading, Berkshire
Example Record 3. Stockport
How do I achieve this in a CASE Statement?
The following two case statements return the correct results, but I some how need to combine them into a single Statement?
,LEFT(Address ,CASE WHEN CHARINDEX(',',Address) =0
THEN LEN(Address )
ELSE CHARINDEX(',' ,Address ) -1 END) AS 'Town Test'
,LEFT(Address ,CASE WHEN CHARINDEX('*',Address ) =0
THEN LEN(Address)
ELSE CHARINDEX('*' ,Address ) -1 END) AS 'Town Test2'
View 8 Replies
View Related
Nov 5, 2007
I have a view where I'm using a series of conditions within a CASE statement to determine a numeric shipment status for a given row. In addition, I need to bring back the corresponding status text for that shipment status code.
Previously, I had been duplicating the CASE logic for both columns, like so:
Code Block...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,
shipment_status_text =
CASE
[logic for condition 1]
THEN 'Condition 1 text'
WHEN [logic for condition 2]
THEN 'Condition 2 text'
WHEN [logic for condition 3]
THEN 'Condition 3 text'
WHEN [logic for condition 4]
THEN 'Condition 4 text'
ELSE 'Error'
END,
...remainder of SQL view...
This works, but the logic for each of the case conditions is rather long. I'd like to move away from this for easier code management, plus I imagine that this isn't the best performance-wise.
This is what I'd like to do:
Code Block
...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,
shipment_status_text =
CASE shipment_status
WHEN 1 THEN 'Condition 1 text'
WHEN 2 THEN 'Condition 2 text'
WHEN 3 THEN 'Condition 3 text'
WHEN 4 THEN 'Condition 4 text'
ELSE 'Error'
END,
...remainder of SQL view...
This runs as a query, however all of the rows now should "Error" as the value for shipment_status_text.
Is what I'm trying to do even currently possible in T-SQL? If not, do you have any other suggestions for how I can accomplish the same result?
Thanks,
Jason
View 1 Replies
View Related
Jul 4, 2006
Hello friends,
I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?
following part of the procedure clears my requirement.
SELECT E.EmployeeID,
CASE E.EmployeeType
WHEN 1 THEN
select * from Tbl1
WHEN 2 THEN
select * from Tbl2
WHEN 3 THEN
select * from Tbl3
END
FROM EMPLOYEE E
can any one help me in this?
please give me a sample query.
Thanks and Regards,
Kiran Suthar
View 7 Replies
View Related
May 5, 2015
I am attempting to run update statements within a SELECT CASE statement.
Select case x.field
WHEN 'XXX' THEN
UPDATE TABLE1
SET TABLE1.FIELD2 = 1
ELSE
UPDATE TABLE2
SET TABLE2.FIELD1 = 2
END
FROM OuterTable x
I get incorrect syntax near the keyword 'update'.
View 7 Replies
View Related
May 26, 2006
Hi All,
I've looked through the forum hoping I'm not the only one with this issue but alas, I have found nothing so I'm hoping someone out there will give me some assistance.
My problem is the case statement in my Insert Statement. My overall goal is to insert records from one table to another. But I need to be able to assign a specific value to the incoming data and thought the case statement would be the best way of doing it. I must be doing something wrong but I can't seem to see it.
Here is my code:
Insert into myTblA
(TblA_ID,
mycasefield =
case
when mycasefield = 1 then 99861
when mycasefield = 2 then 99862
when mycasefield = 3 then 99863
when mycasefield = 4 then 99864
when mycasefield = 5 then 99865
when mycasefield = 6 then 99866
when mycasefield = 7 then 99867
when mycasefield = 8 then 99868
when mycasefield = 9 then 99855
when mycasefield = 10 then 99839
end,
alt_min,
alt_max,
longitude,
latitude
(
Select MTB.LocationID
MTB.model_ID
MTB.elevation, --alt min
null, --alt max
MTB.longitude, --longitude
MTB.latitude --latitude
from MyTblB MTB
);
The error I'm getting is:
Incorrect syntax near '='.
I have tried various versions of the case statement based on examples I have found but nothing works.
I would greatly appreciate any assistance with this one. I've been smacking my head against the wall for awhile trying to find a solution.
View 10 Replies
View Related
Feb 20, 2008
i want to display records as per if else condition in ms sql query,for this i have used tables ,queries as follows
as per data in MS Sql
my tables are as follows
1)material
fields are -- material_id,project_type,project_id,qty, --
2)AB_Corporate_project
fields are-- ab_crp_id,custname,contract_no,field_no
3)Other_project
fields are -- other_proj_id,other_custname,po
for ex :
vales in table's are
AB_Corporate_project
=====================
ab_crp_id custname contract_no field_no
1 abc 234 66
2 xyz 33 20
Other_project
============
other_proj_id other_custname po
1 xxcx 111
2 dsd 222
material
=========
material_id project_type project_id qty
1 AB Corporate 1 3
2 Other Project 2 7
i have taken AB Corporate for AB_Corporate_project ,Other Project for Other_project
sample query i write :--
select m.material_id ,m.project_type,m.project_id,m.qty,ab.ab_crp_id,
ab.custname ,op.other_proj_id,op.other_custname,op. po
case if m.project_type = 'AB Corporate' then
select * from AB_Corporate_project where ab.ab_crp_id = m.project_id
else if m.project_type = 'Other Project' then
select * from Other_project where op.other_proj_id=m.project_id
end
from material m,AB_Corporate_project ab,Other_project op
but this query not work,also it gives errors
i want sql query to show data as follows
material_id project_type project_id custname other_custname qty
1 AB Corporate 1 abc -- 3
2 Other Project 2 -- dsd 7
so plz help me how can i write sql query for to show the output
plz send a sql query
View 8 Replies
View Related
Jan 18, 2008
I am trying to use a case statement in one of my stored proc but I am stuck a little bit.Here is a example, something like:declare @id int set @id =1case @id When 1 then select * from contactsend case but this keeps on giving me error: Incorrect syntax near the keyword 'case'. Any help is appreciated!
View 7 Replies
View Related
Apr 22, 2008
Hi I have some question regarding the sql case statment.Can i use the case statement with the where clause.Example: SELECT FirstName, IDFROM myTablewhere case when ID= '123' then id = '123' and id='124' endorder by idBut the above code does not work.
View 9 Replies
View Related
Jun 2, 2005
Hi all,
I was wondering if there is any way in an sql statement to check whether the data your trying to get out of the DB is of a particular type, ie. Int, char etc. I was thinking about a case statement such as
<code>
CASE WHEN (MyNum <> INT) then 0 end AS MyNum
</code>
This has to be included in the sql statement cause I need this field to get other data.
Any thoughts on how to achieve this would be greatly appreciated.
If I’m in the wrong thread section please advise of best one to get help in.
View 1 Replies
View Related
Sep 17, 2005
Hi !!!i hope one of the sql specialists answer me about the best and most effeceint way to acheive what i am looking for Scenario:-------------i have a 3 tables related to each other Addresses, Groups and GroupAddressthe relation is for both addresses and groups is one to many in the GroupAddress.the behaviour in the application : user can add addresses to his address list and from the address list a user can add an address to many groups like if you have Group name "Freinds" and you add me in it and you have Football team group and you add me to it like that !!!not i have another function called "copy group"in the GroupAddress i have this data as example GroupID AddressID1 41 61 21 441 72 82 62 93 133 73 10and the group ID called "Freinds"i want to copy the group so i can have another group that has the same addresses by one click rather than collectiong them again one by one ...by the way the new copy will have a new group name ( as this is thebusiness logic so user can not have dupicate group name )so what is the best SQL statement that i need to copy the group ???i hope that clear enough!
View 2 Replies
View Related
Jan 23, 2002
I am trying determine if I can do something like the code below. I have done a left join on a table. In the select statement there are three possible values. Yes, No, or NULL. I could like to use a Case statement to determine if there is Null. If so, then output N/A in place of the Null. So then my possible valus are Yes, No, and N/A.
Any clues?
Thanks,
John
SELECT TOP 100
OfferDressRoomYN.yesno as OfferDressRoom
= CASE
WHEN offerDressRoomYN.yesno IS NULL THEN 'N/A'
END,
FROM dataquestionnaire dq
LEFT OUTER JOIN yesno OfferDressRoomYN ON dq.c3_1 = OfferDressRoomYN.yesnoid
View 2 Replies
View Related
Aug 27, 2001
Hi
Can anybody tell me how to execute store procedure in the case statement.
Thanks
View 1 Replies
View Related
Sep 23, 2002
How do l use the case statement to cater for these updates.
BEGIN TRANSACTION
UPDATE TBL_DEV_OL_NEW1
SET Entity = ('AB')
WHERE AB_CLIENT = 1
COMMIT
GO
BEGIN TRANSACTION
UPDATE TBL_DEV_OL_NEW1
SET Entity = Entity + '' + ' | SB'
WHERE SB_CLIENT = 1
COMMIT
GO
BEGIN TRANSACTION
UPDATE TBL_DEV_OL_NEW1
SET Entity = 'SB'
WHERE SB_CLIENT = 1 And entity is null
COMMIT
go
BEGIN TRANSACTION
UPDATE TBL_DEV_OL_NEW1
SET Entity = Entity + '' + (' | CI')
WHERE CI_CLIENT = 1
COMMIT
GO
BEGIN TRANSACTION
UPDATE TBL_DEV_OL_NEW1
SET Entity = 'CI'
WHERE CI_CLIENT = 1 And entity is null
COMMIT
GO
BEGIN TRANSACTION
UPDATE TBL_DEV_OL_NEW1
SET Entity = Entity + '' + (' | GEMS')
WHERE GEMS_CLIENT = 1
COMMIT
GO
BEGIN TRANSACTION
UPDATE TBL_DEV_OL_NEW1
SET Entity = 'GEMS'
WHERE GEMS_CLIENT = 1 And entity is null
COMMIT
GO
View 1 Replies
View Related
Feb 14, 2006
In my query below i have the results ,The thing to observe in the result set it for the name "Acevedo" , "Abeyta" its not doing a group by and populating the results in the following column.Rather its addind a new row and adding it as 1 in the next row.
I have to populate the counts in one row for common names.Shall i use a if condition within a case block.If yes how?any other work arounds would be appriciated.
Please help
Thanks
select
isnull(replace(Ltrim(Rtrim(P.Lastname)),',',''),'' ) Lastname
, case ProductID
WHEN 22 then count(S.Product)
Else 0
END AS Builders
, case ProductID
WHEN 23 then count(S.Product)
Else 0
END AS Associates
, case ProductID
WHEN 24 then count(S.Product)
Else 0
END AS Affiliates
FROM vwpersons p with (nolock)
join vwSubscriptions S with (nolock)
on S.RecipientID = P.ID
where P.Lastname in (select Ltrim(Rtrim(H.name)) from externaldata.dbo.Hispanicnames H)
group by P.Lastname, S.ProductID
having count(P.LastName)>=1
order by 1
Result set :
Firstname Builders AssociatesAffiliates
Abarca 010
Abascal200
Abelar 100
Abeyta100
Abeyta010
Abreu 100
Abreu 010
Acevedo100
Acevedo050
View 2 Replies
View Related
Aug 20, 2007
I am trying to get avg score by site, by call type. Columns are Site(varchar), Calltype(varchar), totalscore(float). Calltypes are A, B, C, D. Sites are 1, 2, 3, 4. I can do a straight average statement and only get one calltype.
I want to do a CASE statement to get all average scores for all calltypes.
Select Site, avg(totalscore) as [Avg Score]
FROM DB
WHERE calltype = 'A'
GROUP BY Site
Results
Site Avg Score (for A)
1 85
2 75.5
3 85.33
SELECT Site, AVG(CASE WHEN TotalScore > 0 AND CallType = 'A' THEN Totalscore
ELSE 0 END) AS [Avg Score For A]
FROM DB
GROUP BY Site
Results
Site Avg Score For A
1 i get 8.5
2 i get 37.75
3 i get 36.57
Why am I getting a difference?
Any help is greatly appreciated - thank you
View 1 Replies
View Related
Aug 18, 2004
Hi Ive got a simple query where I want to calculate an average of one number divided by the other ie: avg(x / y)
Im trying to use a case statement to return 0 in the event that y is 0, to avoid a division by zero error. My query is still returning a division by zero error anyway can anybody help?
SELECT CCode, CASE WHEN BS_TOTAL_ASSETS = 0 THEN 0 ELSE AVG(BSCLTradeCreditors / BS_TOTAL_ASSETS) END AS myaverage
FROM [Company/Year]
GROUP BY CCode, BS_TOTAL_ASSETS
Thanks
View 3 Replies
View Related
