SQL 2012 :: If Transaction Log Backup Fails Due To Conflict Could It Break Log Chain?
Oct 5, 2015If Transaction Log Backup fails due to a conflict could it break the Log Chain?
View 3 Replies
ADVERTISEMENT
SQL 2012 :: Breaking Backup Chain Or Sequence In Server?
Aug 4, 2014We are running SQL Server 2012 on Windows Server 2008. Just wondering what type of actions would break the backup-chain or backup sequence? For instance, if you have tlog backups being taken every 10 minutes and you stop the SQL Server Service for say 30 minutes. Would this action break the backup chain? Or would everything return to normal once the SQL Server Service is restarted?
View 7 Replies View RelatedTransaction Log Backup Fails
May 7, 2001My transaction log backup is failing with the following error:
Does anyone know how I can fix it?
(null)
Microsoft (R) SQLMaint Utility (Unicode), Version 8.00.194 Copyright (C) Microsoft Corporation
(null)
Logged on to SQL Server as 'NT AUTHORITYSYSTEM' (trusted) Starting maintenance plan 'Maint Plan - TLogs' on 5/7/2001 8:18:11 AM Backup can not be performed on database. This sub task is ignored. (null)
Thanks
Transaction Log Backup Job Fails
Jan 21, 2004Our Transaction Log backup job runs every two hours from 7:00am to 8:59pm. Today, our Full backup job and the first Transaction Lob backup job ran successfully. Subsequent Transaction Log Backups have failed with the following error message under Job History:
"The job failed. The Job was invoked by Schedule 13 (Schedule 1). The last step to run was step 1 (Step 1)."
The caveats are that the database is in Full recovery mode and a .TRN file is generated on the server. Also, the SQL Server log says the job ran successfully. Any ideas?
SQL Transaction Log Backup Fails.
Jul 11, 2007Hi,
I'm a clueless SQL noob trying to set a maintenance plan to backup my databases.
This is SQL 2005 running on Windows SBS 2003 R2.
I've created two maintenance plans one to do a full backup of all DBs and one to do transaction log backups every 4 hours of the databases.
The full backups run but the transaction log backup fails with
DTExec: The package execution returned DTSER_SUCCESS (0). in the logs.
I can run the backup manually from the SQL Studio but not automatically.
Any clues on what can cause this not to work?
Thanks,
nline
Transaction Log Backup Via SQL Maint Fails
Jul 5, 2002I have setup a SQL maintenance plan to backup the transaction log file to be backup every one hour M-F.
But now I have been getting the following error:
sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed.
Any clues what does this error mean ?
Thanks.
Master Transaction Log Backup Fails
Nov 9, 2004:eek:
Okay. I changed the times that the transaction logs are backed up, via the built in maintenance schedule. It was then that I started to get failures only on the Transaction log backup for the master. The error that I get from the history log is Backup can not be performed on this database. This sub task is ignored. If I look in the file that is saved to disk :
Starting maintenance plan 'DB Maintenance Plan1' on 09/11/2004 02:30:00
Backup can not be performed on database 'master'. This sub task is ignored.
[1] Database onyx: Transaction Log Backup...
Destination: [R:BACKUPonyxonyx_tlog_200411090230.TRN]
** Execution Time: 0 hrs, 0 mins, 23 secs **
[2] Database onyx: Verifying Backup...
** Execution Time: 0 hrs, 0 mins, 8 secs **
Deleting old text reports... 1 file(s) deleted.
End of maintenance plan 'DB Maintenance Plan1' on 09/11/2004 02:30:31
SQLMAINT.EXE Process Exit Code: 1 (Failed)
I changed the backup back to its original time as this was the only change made. This has not resolved the problem. As I am new to SQL and still finding my feet All the other SQL maintenance plans that I changed are working fine.
Thanks
Steve
DB Maintenance - Backup Transaction Log Fails
Jul 23, 2007Hi,
I'm running SQL 2005 SP2 and having a problem with a Database Maintenance task created in SSMS doing transaction log backups of all user databases.
When I look at dbo.sysmaintplan_logdetail I see the message:
Database 'Database1' will not be backed up because it does not have its recovery model set to Full or BulkLogged.
Great - that's what we want! Skip the SIMPLE recovery mode databases. However, the next entry is the following error message:
Executing the query "BACKUP LOG [Database1] TO DISK = N'D:\MSSQL$Windows\MSSQL.2\MSSQL\Backup\Database1\Database1_backup_200707231600.trn' WITH NOFORMAT, NOINIT, NAME = N'Database1_backup_20070723160023', SKIP, REWIND, NOUNLOAD, STATS = 10 " failed with the following error: "The statement BACKUP LOG is not allowed while the recovery model is SIMPLE. Use BACKUP DATABASE or change the recovery model using ALTER DATABASE. BACKUP LOG is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Which says to me it is trying to backup the same database(s) it just said it was skipping!
What's going on? I see that there is a fix to a similar error message with the cumulative update KB936305 (http://support.microsoft.com/kb/936305) for maintenance cleanup tasks.
Does anybody else have such a problem?
SQL 2012 :: Backup Database Fails
Aug 21, 2014If I try to backup of database in sql 2012 with t-Sql as follows:
Backup database db1
to disk='c:myfullbkup.bak' with init
go
This code works absolutely fine.
But if I try to take backup through SSMS -Task -Backup in object explorer and gave the same path of c: drive or any other folder outside sql default "Backup" folder.It gives error as access denied.This was not the scene in Sql server 2008.
SQL 2012 :: Backup To Clear Transaction Log
Jan 29, 2015Looking at the recovery model on MSDN - was under the belief from it that if you set your database to use the simple recovery model, then when you preform a full back up it would truncate the transaction log file but this doesn't seem to be the case?We aren't looking to do a point in time recovery for this particular databse.
View 7 Replies View RelatedSQL Server Admin 2014 :: Comvault Backups Breaking Backup Chain?
Jan 10, 2015I'm performing SQL Server native backups and Comvault Backups are breaking the backup chain?I can work around them if they only perfume 1 backup per day.We have a 3rd party hosting our servers so I do not have much control as to what they do.I have concerns about being able to get my databases Comvault being restored.
View 2 Replies View RelatedSQL 2012 :: Local Backup Strategy On Primary With Transaction Log Shipping Enabled To Secondary DR Site
Oct 2, 2014I have a scenario where a customer is going to be using Log Shipping to the DR site; however, we need to maintain the normal backup strategy on the current system. (i.e. Nightly Full, Every 6 Hour Differential and Hourly Transaction Log backup)I know how to setup Transaction Log Shipping and Fail-over to DR and backup but now the local backup strategy is going to be an issue. I use the [URL] .... maintenance solution currently.
Is it even possible to do regular backups locally keeping data integrity for your backup strategy with Transaction Log Shipping enabled?
SQL Server 2012 :: Finding Break In Sequence
Feb 21, 2014I need to be able to identify breaks in a sequence so I can evaluate the data more correctly. In the sample I have given I need to be able to identify the break in sequence at 69397576, ideally I would set that as a D. My query also needs to recognize that the 3 sequences following 69397576 are sequential and would belong to that set. so the out come would look like this.
id file_name page_follow
693975631555557564_22222221114014810D
693975641555557564_22222221114014810F
693975651555557564_22222221114014810F
693975661555557564_22222221114014810F
693975671555557564_22222221114014810F
693975681555557564_22222221114014810F
693975691555557564_22222221114014810F
693975761555557564_22222221114014810D
693975771555557564_22222221114014810F
693975781555557564_22222221114014810F
693975791555557564_22222221114014810F
here is some test data.
create table test1 (id INT
, [file_name] VARCHAR(100)
, page_follow CHAR(1));
go
[code]....
Differential Backup Fails Because Of Erroneous Full Backup
Jul 19, 2007Hi
I am using the Simple recovery model and I'm taking a weekly full backup each Monday morning with differentials taken every 4 hours during the day.
On Wednesday afternoon, a programmer ran a process that corrupted the db and I had to restore to the most recent differential. It was 5pm in the afternoon and a differential backup had just occured at 4pm. No problem, I figured.
I restored the full backup from Monday morning and tried to restore the most recent differential backup. The differential restore failed. Since I had used T-SQL for the initial attempt, I tried using Enterprise Manager to try again.
When viewing the backup history, I see my initial full backup taken on Monday plus all the differentials. BUT, on closer inspection, I noticed another full backup in the backup history that was taken early Tuesday morning. I can't figure out where this Tuesday morning full backup came from. It wasn't taken by me (or scheduled by me) and I'm the only one with access to the server. My full backups are usually named something like HCMPRP_20070718_FULL.bak. This erroneous full backup was named something like HCMPRP_03a_361adk2k_dd53.bak. It seemed like it was a system generated name. Not something I would choose. To top it off, I could not find this backup file anywhere on the server and when I tried to restore using this full backup, it failed.
Does anyone have any clues as to where this full backup might come from? Does SQL Server trigger a full backup on its own if some threshold is reached?
I ended up having to restore using the differential taken just before this erroneous full backup and lost a day of transactions.
Any insight is greatly appreciated.
SQL Server 2012 :: BCP Query Out Not Working With Line Break
Mar 2, 2015I have SQL Server 2012, and I'm trying to execute a bcp with a queryout and it is not working with line break, I will send you an example of a simple query my real case is a very long query that contains line breaks but this example behaves the same:
DECLARE @StoredProcedure AS NVARCHAR(4000) ,
@sql AS NVARCHAR(4000)
SET @StoredProcedure = N'"SELECT *
from clarity.[dbo].[ACCESS_DEP]"'
[code]...
Of course that is not the solution as I have a very long query that requires line breaks.
SQL 2012 :: How To Resolve IP Conflict Error While Server Clustering
Dec 8, 2014I am practicing on vmware 2 node failover cluster for doing Sql failover clustering understanding.I did proper Ad Dc setup and configured san storage through iscsi software that I downloaded from net.I did target and initiator configuration for san storage on same Domain controller vm.Name of target is Target1 and has two initialtor for node1 and node2.It has two virtual disk assigned Quorumdisk.vhd and sqldisk.vhd.ON vmnode1 I have initialzed and formatted my both disk with proper volume and label.
Node which are participating in cluster are node1 and node2.while my windows clustering went fine,while Sql server installation on node 1,i got error IP Address conflict occured.
my DC has IP address:192.168.1.10
my Node1 is 192.168.1.20
node2:192.168.1.30
Cluster IP address is 192.168.1.35
What has cause this situation.What configuration is needed.How do I troubleshoot this problem as now I can not install my sql for clustering as also gave me Invalid network name error.Is my storage configuration not proper or IP address is in correct?Do I need to put my virtual disk in Clustered shared volume?
SQL Security :: Full Backup Needed After Restoration Of Database Before Transaction Log Backup
Jul 15, 2015We take a full backup in the early morning and hourly transaction log back during the working hours for one database in the production server. The application team made certain changes to the design of the said database in their development server. The backup from the development server was restored to the production server during working hours. After the restoration should we take a full backup before next transactional logbackup? Would the transactional log backup with out a full backup after the restoration of a database be valid?
View 5 Replies View RelatedSQL 2012 :: SSRS Page Break Based On Start And End Date Parameters
Jul 7, 2015I have a detailed report in ssrs in which data can come from start date and end date parameters.
but the problem is. for example i gave startdate as 01/01/2015 and end date as 09/31/2015 then the data must be in displayed in such a way that jan month in one tab and feb month data in one tab and sooo on to sep month data in new tab when i export to Excel.
Is this possible in ssrs ?
Reporting Services :: SSRS 2012 - Page Break With Column Grouping
Nov 16, 2015We are facing problem in doing page break with column grouping. Our column group contains years e.g 2011, 2013 . We want to show a complete page for a year.
Suppose 2011 has 10 records(horizontal) and 2013 has 12 records(horizontal) in column. The output should be 10 records of 2011 in first page, 12 records of 2013 in second page.
We cannot change the report layout to make column to row and vice versa.
Should Full Backup And Transaction Backup Be From One Plan?
Mar 11, 2008Hello, everyone:
I just heard that for restore purpose, ths full backup and transaction log backup should be from one maintenance plan. Otherwise transaction log backup files cannot be restored after restoring full backup files.
Is it true? Can anyone offer official documents?
In my system, full and transaction backups are from one maintenance plan. Restores are doing fine. I am not sure that ideal is true or not.
Thanks
ZYT
What Is The Differences Between A Differential Backup And Transaction Log Backup??
Jun 13, 2007what is the differences between a differenctial backup and transaction log backup?
View 1 Replies View RelatedIs It Possible To Restore From A Database Backup Without A Transaction Log Backup?
Oct 14, 2007I neglected to backup the transaction log as part of the process of backing up the database. Now i only have the backup file for the database and no transaction log backup. When i try to do a restore on the database, i get the error on a "tail log missing" message (which i'm assuming is that it's looking for the t-log backup?).
Is it possible to restore or even restore to a new database? I'm only looking to retreive data from 2 tables within the backup file.
Thanks!
SQL Server 2005 on Windows 2003 Server x64.
Transaction Fails
May 12, 2008Hi All
I have parent package which is having the Execute Sql task , which execute the script provided by file connection , after that it calls the child package thru Exceute Package task , I have set the Parent package's Transaction property as "Required" & child's as "Support" , as I run the package child package gets hang .. but it started running when I put the direct input instead of script in my parent package . Can you plz help why this is happening & what is the solution because I require that script file
Kind Regards
Renuka
Renuka.M.Popli
SQL 2012 :: Error (backup Failed To Complete The Command BACKUP LOG) In Event Viewer
Aug 23, 2013On the SQL Server the Event Viewer shows the same messages and errors every evening between 22:05:00 and 22:08:00. The following information messages are shown for every database:
"I/O is frozen on database <database name>. No user action is required. However, if I/O is not resumed promptly, you could cancel the backup."
"I/O was resumed on database <database name>. No user action is required."
"Database backed up. Database: <database name>, creation date(time): 2003/04/08(09:13:36), pages dumped: 306, first LSN: 44:148:37, last LSN: 44:165:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'{A79410F7-4AC5-47CE-9E9B-F91660F1072B}4'}). This is an informational message only. No user action is required."
After the 3 messages the following error message is shown for every database:
"BACKUP failed to complete the command BACKUP LOG <database name>. Check the backup application log for detailed messages."
I have added a Maintenance Plan but these jobs run after 02:00:00 at night.
Where can I find the command or setup which will backup all databases and log files at 22:00:00 in the evening?
SQL 2012 :: Backup Cleanup Of Differential And Log Backups Based On Full Backup?
Feb 19, 2015Using Ola Hallengren's scripts I do a full backup of a database on a Sunday. Then differential backups every 6 hours and log backups every hour. I would like to keep a full week of backups based off the full backup done on Sunday. Is there a way for me to clear out the diff and log folders after the successful full backup on Sunday nights?
View 2 Replies View RelatedContinue Transaction If Trigger Fails
Nov 6, 2007Hi guys,
I have some triggers that insert data in a table located in a remote server. If the remote server happens to be down I want to continue with the original transaction anyway. Can I use a BENGIN TRY BEGIN CATCH block to continue with the transaction in the trigger and also insert the data into a temporal local table if the remote insert fails?
Regards
SQL 2012 :: Schedule Backup / Copy Backup And Rename To Other Folder
Dec 29, 2014I'm looking to schedule a maintenance plan for my databases which I have done.I'd like this database to be copied to another folder and the name altered to include the file name and the current date time stamp.Is this possible in the scheduled maintenance plan?
View 4 Replies View RelatedADO.NET Transaction Fails To Update Database After .Commit()
Nov 24, 2003SQL Server 2000, C#, ASP.NET and ADO.NET. I have searched for 3 days trying to figure out why my ADO.NET Transaction executes my stored procedures and runs the .COMMIT() on the server, figured this out by using the SQL Profiler, but the data doesn't show up in the database tables and I recieve no error from SQL or ASP.NET. What gives???? Anyone else ever heard of such a thing. Please help, before I loose my sanity.
View 4 Replies View RelatedTransact SQL :: Intermediate Data Before Transaction Fails
May 18, 2015I have one SP in which I am opening transaction and on fail I am rolling back transaction.
Is there any way I can preserve data in temp table before failing record.
I means to say At record no 21 get failed I need to see 20 records in any temp tables.
BackUp Fails
Dec 17, 2007Guys I was wondering if you can help me figure out the problem with the script.
1) I am getting the following error message on one of the job which is backing up all the databases on the server.
...ges for database 'AdminWorkFlow_Reports', file 'AdminWorkFlow_Reports_Data' on file 1.
[SQLSTATE 01000] (Message 4035) Processed 1 pages for database 'AdminWorkFlow_Reports',
file 'AdminWorkFlow_Reports_Log' on file 1. [SQLSTATE 01000] (Message 4035) Backup or
restore operation successfully processed 433177 pages in 64.328 seconds (55.163 MB/sec).
[SQLSTATE 01000] (Message 3014) Processed 113720 pages for database 'BMSRep', file 'BMS_Data'
on file 1. [SQLSTATE 01000] (Message 4035) Processed 1 pages for database 'BMSRep', file '
BMS_Log' on file 1. [SQLSTATE 01000] (Message 4035) Backup or restore operation
successfully processed 113721 pages in 17.200 seconds (54.162 MB/sec). [SQLSTATE 01000]
(Message 3014) Processed 208 pages for database 'EmailAddress', file 'EMailAddress_STGE_Data'
on file 1. [SQLSTATE 01000] (Message 4035) Processed 1 pages for database 'EmailAddress',
file 'EMailAddress_STGE_Log' on file 1. [SQLSTATE 01000] (Message 4035) Backup or restore
operation succe... The step failed.
Not sure where to start. I looked up the backup script it looks fine.
BackUp Database AdminWorkFlow_Reports to Disk = 'q:\AdminWorkFlow_Reports12-17-2007.bak'
--
--
--
--
BackUp Database EmailAddress to Disk = 'q:\EmailAddress12-17-2007.bak'
2)Also I have another script which for some reason doesn't run on some nights. Its enabled and the job is scheduled daily but its not running for about a week.
SQL server agent is running though.
Any help in this regard would be appreciated.
Backup Job Sometimes Fails
Jul 18, 2007Hi
We have a nightly job on a production server which backs up all databases
(about 90 on the server)
Sometimes it'll only backup some of them, yet it reports success.
Our proc to manage the process is below:
Any ideas on what we need to do to make it reliable ?
-----------------------------------------------------
DECLARE @DB_Name varchar(32)
DECLARE @Backup_Path varchar(255)
DECLARE @Backup_Name varchar(255)
DECLARE DB_Cursor CURSOR FOR SELECT NAME FROM sysdatabases
OPEN DB_Cursor
FETCH NEXT FROM DB_Cursor INTO @DB_Name
WHILE @@FETCH_STATUS = 0
BEGIN
IF @DB_Name <> 'tempdb' AND @DB_Name <> 'model'
BEGIN
print '--------------------------------<< ' + @db_name + '
>>--------------------------------'
SET @Backup_Path = N'd:sql2005backupsightly' + @DB_Name + 'Daily' +
'.bak'
SET @Backup_Name = @DB_Name + N' backup'
BACKUP DATABASE @DB_Name TO DISK = @Backup_Path WITH INIT
print ''
END
FETCH NEXT FROM DB_Cursor INTO @DB_Name
END
Print "Finished backing up the databases"
CLOSE DB_cursor
DEALLOCATE DB_cursor
Trans Log Backup Fails
Nov 4, 2005I have a trans log backup that runs every 15 minutes on san, works fine until I do a backup after a large load. I get the below error message. Anyone had this before?
Executed as user: DPSCSDOMsqlexec. The file on device 'n:sqllogsmdentallgdmp' is not a valid Microsoft Tape Format backup set. [SQLSTATE 42000] (Error 3242) BACKUP LOG is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step fail
Backup To Tape Fails Sometimes
Jul 2, 2001I am trying to backup a database to a tape. It works when it wants to. I get a 3013 error. The drive is fully functional. Seagate backup works fine. SQL Backup does not. I think it might be that the tape needs retensioning sometimes. Here is the sql statement: BACKUP DATABASE pubs TO TAPE='.ape0' WITH FORMAT. Is there a retension parameter I am failing to see?
View 2 Replies View Related