I convert EBCDIC file to text file at C:orderorder.txt. There are about 1400000 rows. The length of line is 1500.
How to insert entire line into one column of the table? (only one column, named as [LineDetail])
A column of a table has values in the format - 35106;#Grandbouche-Cropp, Amy.
I need to format the column data in such a way that only the text after # (Grandbouche-Cropp, Amy) remain in the column.
The text before ;# (35106) should be inserted in to another column of the same table.
Below is the table structure:
create table [HR_DEV_DM].[CFQ_TEST].sp_CFQ_Commercial_Referrals
(
ID int identity,
PromotionalCode nvarchar(4000),
QuoteNumber nvarchar(100),
CreatedBy nvarchar(100),
Created datetime,
ModifiedBy nvarchar(100),
Modified datetime,
CreatedBy_SalesRepSharePointID int,
ModifiedBy_ModBySharePointID int
)
I am loading files with same format from two different locations in to one database. First, my SSIS connects to location 1.
Lets Say
Location1 : C:LoadFilesImport
Location2 : D:LoadFilesImport
Location one has three different set files starting with
First Set: AP_1, AP_2,AP_3,
Second Set: VD_1, VD_2, VD_3,
Third Set: BK_1,BK_2,BK_3,
This SSIS set to run every 3 hours, if it finds files of any set load them. While loading it has to insert into a derivedcolumn called CustID. If the file name Starts with AP_ , custiD values should be as 101
AP_1 goes to Table1
AP_2 goes to Table2
AP_3 goes to Table3
If the file name Starts with VD_ , custiD values should be as 201
If the file name Starts with BK_ , custiD values should be as 301
after processing all these files in first location, the SSIS looks for files in second location and does the same?
--How to achieve CustID depending upon file name ?
Hello,
Since SQL 2005 Express doesn't appear to let you paste multiple lines of data into a cell -- a task as "basic" as the Commodore 64 -- I'm forced to enter the data for 2 records directly. I'm trying to insert line breaks, which SQL 2000 allowed you to do by simply pressing the Enter key. However, 2005 just moves you to another record. How do I do this extremely simple task?
Many thanks for a speedy reply!
I've the following T-SQL block that I'm executing where I want to print the following output in next line but not sure how to do this:
This is printing everything in one line:
SET @BODYTEXT = ' Dear ' + @fname +',We realize you may have taken ' + @course_due + ' in '+ @month_last_taken +'.'
How do I do this:
SET @BODYTEXT = ' Dear ' + @fname +
',We realize you may have taken ' + @course_due + ' in '+ @month_last_taken +'.'
Also how can I create a table in this variable, something like this:
(TABLE) LIST THE COURSE CODE, COURSE NAME , EMPLOYEE ID, EMPLOYEE NAME
(Course Name) (Last Completed) (Now due in Month/year)
My T-SQL code:
DECLARE @email varchar(500)
,@intFlag INT
,@INTFLAGMAX int
,@TABLE_NAME VARCHAR(100)
,@EMP_ID INT
,@fname varchar(100)
[Code] ......
I am using table object to present report.
table row1 has all the column names and table row2 has the data.
How can i put a horizontal line between column names and the data rows.
Thank you very much.
Is there a way to avoid entering column names in the excel template for me to create an excel file froma dynamic excel using openrowset.
I have teh following code but it works fien when column names are given ahead of time.
If I remove the column names from the template and just to Select * from the table and Select * from sheet1 then it tells me that column names donot match.
Server: Msg 213, Level 16, State 5, Line 1Insert Error: Column name or number of supplied values does not match table definition.
here is my code...
SET @sql1='select * from table1'SET @sql2='select * from table2'
IF @File_Name = '' Select @fn = 'C:Test1.xls' ELSE Select @fn = 'C:' + @File_Name + '.xls' -- FileCopy command string formation SELECT @Cmd = 'Copy C:TestTemplate1.xls ' + @fn
-- FielCopy command execution through Shell Command EXEC MASTER..XP_CMDSHELL @cmd, NO_OUTPUT -- Mentioning the OLEDB Rpovider and excel destination filename set @provider = 'Microsoft.Jet.OLEDB.4.0' set @ExcelString = 'Excel 8.0;HDR=yes;Database=' + @fn
exec('insert into OPENrowset(''' + @provider + ''',''' + @ExcelString + ''',''SELECT * FROM [Sheet1$]'') '+ @sql1 + '') exec('insert into OPENrowset(''' + @provider + ''',''' + @ExcelString + ''',''SELECT * FROM [Sheet2$]'') '+ @sql2 + ' ')
Hi.
I have a long TEXT column and it cuts off at a certain point
in the Query Analyzer. I tried copying and pasting to notepad
but it is still half the actual string. How do i get the whole
TEXT string from a given column?
Thanks!
How do I "ltrim" an enire colum?
Thanks,
Is it possible to pass entire where sentence to a store procedure?From app, I'll generate a where sentence like below:
where orderID = '123' and orderCidy='London'
I created a store procedure like below but got an error said that An expression of non-boolean type specified in a context where a condition is expected, near 'END'
CREATE PROCEDURE getorder
@mywhere VARCHAR(100)
AS
BEGIN
SET NOCOUNT ON;
select * from order @mywhere
END
I got a sales cost and cost amount table for my budget. the sales cost table is getting updated with FOBB items which makes the total incorrect . the FOBB values needs to be moved from the sales cost column to the cost amount column. how can i do it with an SQL script.
View 1 Replies View RelatedI need to create some kind of log file or table that will record whenever an insert, update or delete is made to any table in a database. I have seen triggers that do this kind of thing on a table level. Can this be done with a trigger or a stored procedure on a database level? If so some kind of example or syntax would be great.
TIA.
Mike
I receive this message when I try to run any report. The reportserver and reportservertempdb databases were upgraded using backup/restore from SQL2000 to SQL2005 on a separate server which is running RS2005 . Please help. Thanks
View 1 Replies View RelatedI'm using the following query to look in a log file and show somestatistics. It counts the total number of views and the total numberof unique users who have viewed a particular item (the "id" and"title" fields are associated with the item).SELECT title, COUNT(id) AS NumberViews, COUNT(DISTINCT UID) ASNumberUniqueUsers, Type, idFROM ActivityLogWHERE dtTime >= 'Nov 1 2004 12:00AM' AND DtTime <= 'Nov 1 200512:00AM'GROUP BY Title, Type, hdnIdORDER BY TopViewed descThis works fine on SQL Server 2000 (our development machine), but onSQL Server 7 (our production machine), the title column has the samevalue for every row. The other columns show the correct values.If I remove the "ORDER BY" clause, then it works fine. If I removethe "COUNT(DISTINCT UID)" column, it works fine. If I totally removethe WHERE clause, it works fine.Any ideas? It seems like a bug since it works fine on sql2k. I'vetried adding OPTION (MAXDOP 1) to the end of the query, but thatdidn't help.We're using SQL Server 7.0 sp1, and my boss doesn't want to riskupgrading to sp4 because it might screw up all of our otherapplications. I looked through all of the sp2 through sp4 bug fixes,and I didn't see anything specifically mentioning this.Thanks.
View 2 Replies View RelatedI would like to change a value after the table updates inserts a new row based on the value of that column
Table Name is: MPanel
Col Names: RID, FPID.
I want to:
If column RID='16'
Then UPDATE FPID='1'
How can I trigger that update? Would this work:???
CREATE TRIGGER dbo.MyTrigLI
ON dbo.MPanel
FOR INSERT, UPDATE
AS
BEGIN
UPDATE [MPanel]
SET
FPID='1'
WHERE (UPDATE(RID='16')
END
I want Compare two Table data and insert changed field to the third table ...
View 9 Replies View RelatedI just created a new table with over 100 Columns and I need to populated just the first 2 columns.
The first columns to populate is an identify column that is the primary key. The second column is a foreign_key to an other column and I am trying to populate this columns with all the values from the foreign_key value. This is what I am trying to do.
column1 = ID
column2= P_CLIENT_D
SET IDENTITY_INSERT PIM1 ON
INSERT INTO PIM1 (P_CLIENT_ID)
SELECT
Client.ID
FROMP_Client
So I am trying to insert both an identity values and a value from an other table while leaving the other columns blank. How do I go about doing this.
I have a table and one of the column have tab delimited value and I need to separate the tab delimited values and keep them in separate rows.
ID Name State Country
1 Scott, Ricky NSW AUS
2 Martin VIC AUS
3 James, Peter,John WA AUS
ID column is not a primary key. I want the output columns to identify the comma (,) and put them in separate rows as below
ID Name State Country
1 Scott NSW AUS
1 Ricky NSW AUS
2 Martin VIC AUS
3 James WA AUS
3 Peter WA AUS
3 John WA AUS
How to strip the camma(,) in SQL?
I have a table where one column is an id card number (col1) and another is another column (col2). In col2 I have various values for each col1 ie col1 can have various values of col2. How can i insert col1 concatenated for each col1 in another table?
View 2 Replies View RelatedHi, Could you tell me if this is possible? How do I return results using an entire column as part of the search parameter? I need to do this in the sql rather than selecting the contents and iterating through it as it would take too long.
eg.
CREATE TABLE [dbo].[tPopupKeywords](
[id] [int] IDENTITY(1,1) NOT FOR REPLICATION NOT NULL,
[title] [nvarchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
[description] [nvarchar](2000) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL
) ON [PRIMARY]
INSERT INTO dbo.tPopupKeywords(title, description)
SELECT 'check', 'desc' UNION ALL
SELECT 'for', 'desc' UNION ALL
SELECT 'keywords', 'desc'
select dbo.tpopupkeywords.title
where 'This is an example of a passed in string to check if any keywords are returned.'
LIKE '% ' + dbo.tpopupkeywords.title + ' %' --Does this bit need to do a select??
expected results.....:
check
keywords
I am trying to use a stored procedure to update a column in a sql table using the value from a variable table I getting errors because my syntax is not correct. I think table aliases are not allowed in UPDATE statements.
This is my statement:
UPDATE [dbo].[sessions_teams] stc
SET stc.[Talks] = fmt.found_talks_type
FROM @Find_Missing_Talks fmt
WHERE stc.sessionid IN (SELECT sessionid FROM @Find_Missing_Talks)
AND stc.coupleid IN (SELECT coupleid FROM @Find_Missing_Talks)
I have created a DTS package that pulls data from one column (varchar,600) in a table and exports it to a text file. The max length in this field is only 285 characters long, however, the end of one of the records is being truncated in the text file. Data is tab delimited in the table and is being exported that way.
Any tips would be greatly appreciated.
I have two table 'Cal_date' and 'RPT_Invoice_Shipped'.Table cal_data has column month_no, start_date and end_date. And table RPT_Invoice_Shipped has columns Day_No, Date, Div_code, Total_Invoiced, Shipped_Value, Line_Shipped, Unit_Shipped, Transaction_Date.
I am using below insert statment to insert data in RPT_Invoice_Shipped table.
insert into [Global_Report_Staging].[dbo].[RPT_Invoice_Shipped]
(Day_No, Date, Div_code, Total_Invoiced, Transaction_Date)
select , CONVERT(DATE,Getdate()) as Date, LTRIM(RTRIM(div_Code)),
sum(tot_Net_Amt) as Total_Invoiced, (dateadd(day, -1, convert(date, getdate())))
from [Global_Report_Staging].[dbo].[STG_Shipped_Invoiced]
WHERE CONVERT(DATE,Created_date )=CONVERT(DATE,Getdate())
group by div_code
while inserting in column Day_No in RPT_Invoice_Shipped table, I have to use formula (Transaction_Date-start_date+1) where Transaction_Date from STG_Shipped_Invoiced and start_date from Cal_date table. I was using datepart (mm, Transaction_Date) so it gives month_no, and this month_no we can join with month_no of Cal_date table and fetch start_date from Cal_date table, so that we can use start_date for formula (Transaction_Date-start_date+1).
But I am getting difficulty to arrange this in above query. how to achieve this?
Hi! I've some data in a table, and I want to add these records to another table, but I tried yet with select ... Into ... and I lose all the data from this one. I need to ADD the data from table to table. Any suggestion?
Thx
Hi,I need to lock a table so that Inserts are prevented as well as deleted andupdates. At present I'm thinking this might do it:SELECT * FROM myTable WITH(UPLOCK)but then again I'm not sure whether this will cover the insert case.Thanks,Robin
View 5 Replies View RelatedHow can I do in order that a table show all its rows in a page?And if the table can only show a number of rows cause arrive to the end of the page show the table in the next page?
Thanks!
I use code below to insert data into a temp table.
How many records can insert into a temp table?
Select * into #temp from ORDER
I used bulk insert to insert a txt file into a table. It works fine. (see code below) Now, one txt file with column's name at first row and has about 200 columns. There is no table created before. How to code to create a destination table based on first row of the txt file so that bulk insert will work for that txt file?
BULK INSERT #MBRACCT
FROM 'c:order.TXT'
WITH
(
FIELDTERMINATOR = '|',
FIRSTROW = 2,
ROWTERMINATOR = ''
)
I'd like to know how to get windows events script below into a SQL Server Table.
Get-WinEvent -LogName application -MaxEvents 200 | where {$_.LevelDisplayName -eq "Error"}
In a t-sql 2012 sql script, I have the following script, that only works for a few records since the value of TST.dbo.LockCombination.seq only contains the value or 1 in most cases. Basically for every join listed below, there should be 5 records where each record has a distinct seq value of 1, 2, 3, 4, and 5. Thus my goal is to determine how to add the missing rows to the TST.dbo.LockCombination where there are no rows for seq values of between 2 to 5. I would like to know how to insert the missing rows and then do the following update statement. Thus can you show me the sql on how to add the rows for at least one of the missing sequence numbers?
UDATE LKC
SET LKC.combo = lockCombo2
FROM [LockerPopulation] A
JOIN TST.dbo.School SCH ON A.schoolnumber = SCH.type
JOIN TST.dbo.Locker LKR ON SCH.schoolID = LKR.schoolID AND A.lockerNumber = LKR.number
JOIN TST.dbo.Lock LK ON LKR.lockID = LK.lockID
JOIN TST.dbo.LockCombination LKC ON LK.lockID = LKC.lockID
WHERE LKC.seq = 2
A normal select statement looks like the following:
select * from TST.dbo.Locker LKR
JOIN TST.dbo.Lock LK ON LKR.lockID = LK.lockID
JOIN TST.dbo.LockCombination LKC ON LK.lockID = LKC.lockID
where LKR.number in (000,001,1237)
In case you need the ddl statements for the tables affected here are the ddl statements:
CREATE TABLE [dbo].[Locker](
[lockerID] [int] IDENTITY(1,1) NOT FOR REPLICATION NOT NULL,
[schoolID] [int] NOT NULL,
[number] [varchar](10) NOT NULL,
[serialNumber] [varchar](20) NULL,
[type] [varchar](3) NULL,
[locationID] [int] NULL,
[code]...-
Hi,
I am having problem in bulk update of a sql server table haning identity column from a datatable( has no identity column) using sqlbulkcopy. I tried several approaches, but it does not show any error nor is the table getting updated. But the identity value seems to getting increased every time.
thanks.
varun
I came from DW admin background and new to SQL programming. I have 3 tables:
CUSTOMER - cust_id, cust_name, cust_state
SALES_HEADER - sales_id, cust_id, sales_amount
SALES_DETAIL - prod_id, sales_id, prod_name, prod_price
I am trying to insert into SALES_HEADER table from CUSTOMER and SALES_DETAIL tables. Here are the SQL queries that I am trying to insert.
insert into dbo.SALES_HEADER (SALES_ID,SALES_AMOUNT)
select SALES_ID, sum(PROD_PRICE)
from BOBJ.dbo.SALES_DETAIL
group by SALES_ID;
The above query is working good & to get cust_id from CUSTOMER:
Update dbo.SALES_HEADER
set CUST_ID = (select CUST_ID from dbo.CUSTOMER
where dbo.SALES_HEADER.CUST_ID = dbo.CUSTOMER.CUST_ID)
where CUST_ID is null;
This query is not working & getting message - 6 rows updated successfully.
But using select * from dbo.SALES_HEADER, CUST_ID is still showing as NULL.
What did I do wrong and is there a way to write single query rather than two queries.
I am giving the following statement outside the begin tran block in a stored procedure:
select * from table1 with (holdlock) where column1 = @colValue
I have the following two questions regarding above situation:
Being outside the begin tran block, will the select statement cause a lock to be held or it has to be within the begin tran block for the lock to be held?
Will the select statement hold a lock only on the row or rows matching the where clause, or it may lock a page or even the entire table in this situation?
Thanks