SQL 2012 :: Log Shipping Between Different Domain
Aug 26, 2014
I try to make log shipping between different domain in the same forest, if I set for No recovery mode, it works fine.
I try to set it as standby mode with disconnect users after 30 mins to 1 hr, it fails and it shows restoring but if I want to recover it, it show suspect.
Both of SQL server are 11.0.3128.
Below is my error.
----error for log shipping job----
Message
2014-08-26 11:48:01.15Disconnecting users. Secondary DB: 'LogShipTest'
Message
2014-08-26 11:48:03.40*** Error: Could not apply log backup file 'C:TshipLogShipTest_20140826154010.trn' to secondary database 'LogShipTest'.(Microsoft.SqlServer.Management.LogShipping) ***
2014-08-26 11:48:03.40*** Error: An error occurred while processing the log for database 'LogShipTest'. If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log.
[Code] ....
I try to check whether the log file have issue by logshipping to 2 servers on with norecovery and one with standby, one with norecovery
Seem to me the error on secondary database which service account for SQL server and SQL agent is domain service account and have admin right for the box.
View 1 Replies
ADVERTISEMENT
May 13, 2015
Lets say I have a single instance SQL Server on a 2 node cluster with node names Server X and Server Y. These are part of Domain A.
SQL Agent Account runs under service account - DomainASQLAct.
Now I have Server Z which is a standalone SQL Instance on Domain B and there is no trust between domain A and B, not even one way trust.
Even though I dont have trust, I need to configure log shipping for the SQL Instance which is clustered under Domain A to a standalone box in Domain B.
Microsoft recommends Local Account(SQL Agent) to be used for Cross Domain Log Shipping. Also when there is no trust, MSFT recommends to use the same login name and password, however as my setup includes a cluster and cluster cannot have local account I'm not sure what will be the best strategy to follow here.
View 8 Replies
View Related
Nov 19, 2014
In an SSRS database install along with a log shipping configuration towards a failover server, do we need to log ship the ReportServerTempDB DB also necessarily ?
View 2 Replies
View Related
Nov 21, 2013
I have several databases on a 2012 instance that are mirrored to a second server, and log ship to a third server for reporting purposes.Recently, for two of the databases, the log shipping has been failing at least once per day, and sometimes more often.
i have deleted and recreated both the mirroring and log shipped databases on several occasions, but the problem is still happening.The log shipping restore jobs don't get marked as failed in the job history, but if you expand the history you can see errors such as this:
Date21/11/2013 13:00:01
LogJob History (LSRestore_OAK-DCSQLDB1_OtherCarrierLive)
Step ID1
ServerCHERRY
Job NameLSRestore_OAK-DCSQLDB1_OtherCarrierLive
Step NameLog shipping restore log job step.
Duration00:00:30
Sql Severity0
[code]....
Restoring a new backup of the database cures the problem for anywhere between 15minutes and 12 hours, but it always seems to re-occur.I have run DBCC on the source databases with no errors reported, and five other databases have the log shipping working without errors.
View 9 Replies
View Related
May 31, 2015
Am just on the lookout to find out whether there is a way to put a prefix at the beginning of the transaction log backup file that is created by SQL Server logshipping.
So, instead of having <DatabaseName>_<DateTime>.BAK (which is what SQL does), I would like to have TL_<DatabaseName>_<DateTime>.BAK.
I have looked into a parameter for the sqllogship.exe command, but cannot find any & have looked at fields in the logshipping tables, & can't see anything there either.
View 0 Replies
View Related
Sep 15, 2015
I have log shipping enabled on databases(primary and secondary) and works fine. I need to implement TDE on the database. I have experience on implementing TDE on databases which are not used for log-shipping.
What are the steps needed to setup TDE which are involved with log-shipping.
View 0 Replies
View Related
Jan 23, 2013
We have 4 Servers which have SQL SERVER 2012 and "AlwaysOn" have been enabled on all 4 servers:
Server1,Server2,Server3,Server4
Server1 is the Primary node and thr rest are secondaries. There is a Sync relation between Server1 and Server2 and also there is aSync relation between Server1 and Server3 & Server4.
Is it possible to setup log shipping from Server2 & Server3(secondaries) to two new servers?
View 9 Replies
View Related
May 8, 2014
We have a SQL 2012 server instance that has log shipping set up to another SQL 2012 server to provide a warm standby for a forward facing application. The databases on the primary server occasionally are required to be backed up and restored to a development environment, completely different server. Is there a way to schedule full backups with log shipping enabled?
View 2 Replies
View Related
Jan 21, 2015
I am trying to create a failover cluster without the log shipping in 2012 as i've done it with a static instance with some database.Is the "AlwaysON" feature the solution when an application creates random and numerous databases within the instance and we need a failover scenario ?
View 9 Replies
View Related
Jul 23, 2014
Installed sql server 2012 enterprise. Runs with the built in account fine.
I tried entering a domain account to run as the service account from sql configuration it fails with the error "the specified network password is not correct".
I tried from services.msc and entered successfully but when I try to restart it fails that the log in credentials are wrong.
the domain account and password I entered are just fine. What's it I should do or missing?
View 3 Replies
View Related
Aug 18, 2014
Can you separate a domain attribute into two columns in the Excel Add-In?
We are using the Excel Add-In as the UI for business users and they want to see one of the domain attributes as 2 different columns.
The attribute is Store, currently it is displayed like this:
"123 {STORENAME }".
They want it displayed in two columns in the Excel document for easier filtering/sorting: Store Number and Store Name.
Is this possible? If one column is changed the other would change right along with it.
View 2 Replies
View Related
Sep 19, 2014
We have 2 node sql 2012 cluster and we have a scenario where domain,IPs,Hostanmes and SQL network name are changing.
1> Can SQL cluster role be brought online by changing the sql network name and its IP once windows team reconfigure the OS cluster or there will be any challenges.
2>should I uninstall sql cluster on both nodes then windows will destroy OS cluster and they then they need to change IP,hostname and domain and then fresh installation of sql cluster
View 1 Replies
View Related
Jan 30, 2015
At one of our client side a wired log shipping issues has come up.while monitoring those two server i noticed that although log-shipping report says both server are in sync, report displays information related to both backup and restore , it doesn't shows information related to copy that is when was last file copied and last file copy column is showed blank. Same is when i execute proc "sp_help_log_shipping_monitor" . I get same result ...
When i expand copy job history to analyse its what i found is although job has executed successfully , but in depth reading each steps says that no .trn file was copied .
My copy directory is at secondary server itself where .trn files are placed.And from this location itself files are begin restored.
SQL server and agent on both servers are run by same domain account ....
View 5 Replies
View Related
Jun 3, 2015
I checked the server and found that LS restore job failing and Backup and copy jobs running fine without any issue. and also observed that Copy folder the trn file existing on secondary server. i try to restore trn file im getting the error. and observed that last log backup file that it restored at the secondary database on May2nd,2015.
2015-06-02 12:25:00.72*** Error: The log in this backup set begins at LSN 761571000000022500001, which is too recent to apply to the database. An earlier log backup that includes LSN 721381000002384200001 can be restored.
From Restore job histort details below.
Message
2015-06-02 12:25:00.72*** Error: The file 'xxxx\_20150530104503.trn' is too recent to apply to the secondary database 'database'.(Microsoft.SqlServer.Management.LogShipping) ***
2015-06-02 12:25:00.72*** Error: The log in this backup set begins at LSN 761571000000022500001, which is too recent to apply to the database. An earlier log backup that includes LSN 721381000002384200001 can be restored.
RESTORE LOG is terminating abnormally.(.Net SqlClient Data Provider) ***
2015-06-02 12:25:00.73Searching for an older log backup file. Secondary Database: 'database'
2015-06-02 12:25:00.73*** Error: Could not find a log backup file that could be applied to secondary database 'database'.(Microsoft.SqlServer.Management.LogShipping) ***
2015-06-02 12:25:00.74Deleting old log backup files. Primary Database: 'database'
View 3 Replies
View Related
Nov 6, 2015
I created a SSRS Reports in SQL Server 2012 and deployed in server, I want this report to be accessed by one particular User created in that hosted server and any time if user hits the Report URL it asked for login Prompt.Suppose if I create a Windows User "ReportUser" in report server , I want when user hits the URL he should be able to access the report by providing the 'ReportUser" credentials.
View 7 Replies
View Related
Mar 17, 2014
I've configured log shipping to use for DR purposes. I'm concerned that the physical location of the secondary is mis-reported by SQL Server Management Studio.
Viewing the secondary location (with Studio DB_name Properties Files) shows the path of the primary DB (I expected it to show the path of the secondary).
This SQL command shows the correct/actual paths of both primary and secondary DB's when run on their host servers.
SELECT name, physical_name AS CurrentLocation, state_desc FROM sys.master_files
Is this just cosmetic?
Here is an Example of how the Studio shows the incorrect path for the secondary.
Example:
(Primary) servername=prodSrv, DBname=aquaDB, Actual_Path=G:aquaDB, SQL-studio-Properties-Path=G:AquaDB, sys.master_files Path=G:AquaDB,
Log shipped to
(Secondary / Read Only) servername=DRSrv, DBname=aquaDB, Actual Path=F:aquaDR, SQL-studio-Properties-Path=G:AquaDB(WRONG), sys.master_files Path=F:aquaDR
View 2 Replies
View Related
Dec 16, 2013
I am attempting to set up an always on cluster on VMware for testing. setting up everything through the Failover cluster is fine, the trouble comes when I try to set up the AlwaysOn availability group. Whenever I attempt to specify a network location I receive the following error: Operating System Error 1265(The system cannot contact a domain controller to service the authentication request..).
I looked up this error and most sites point towards a Windows 8 homegroup issue. Since this is a on a domain, I don't think it is relevant. I also added the service accounts from server A to Server B and visa versa. I even added the computer objects to its opposite partner..I have attempted to use "Join Only" and do a manual copy.
View 1 Replies
View Related
Jul 23, 2012
I am working with a client who is rolling out 50+ VM's based of a template we created. This is SQL 2012 CU1 running on Windows Server 2008 R2. Using the default service account the installer has it registers fine and we get the following in the SQL log.
The SQL Server Network Interface library successfully registered the Service Principal Name (SPN) [ MSSQLSvc/server.domain.com:1433 ] for the SQL Server service.
When we change to a domain service account through SQL configuration manager we see the following and cannot connect remote using integrated authentication The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ MSSQLSvc/server.domain.com:1433 ] for the SQL Server service. Windows return code: 0x2098, state: 15. Failure to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been manually registered.
My understanding is you should and could change service accounts using the SQL Server Configuration Manager and it would set all permissions. Is there something we need to do in addition to get this up and working?
Convert DTS to SSIS |
Document SSIS |
30+ SSIS Tasks |
Real-time SSIS Monitoring |
Quick Starts |
BI Blitz
View 9 Replies
View Related
Jun 18, 2015
I received an alert from one of my two secondary servers (all servers are running 2012 SP1):
File 'E:SQLMS SQL ServerMSSQL11.MSSQLSERVERMSSQLDATAMyDatabaseName_DateTime.tuf' is not a valid undo file for database 'MyDatabaseName (database ID 8). Verify the file path, and specify the correct file.
The detail in the job step shows this additional information:
*** Error: Could not apply log backup file 'MyDatabaseName_DateTime.trn' to secondary database 'MyDatabaseName'.(Microsoft.SqlServer.Management.LogShipping) ***
*** Error: Table error: Page (0:0). Test (m_headerVersion == HEADER_7_0) failed. Values are 0 and 1.
Table error: Page (0:0). Test ((m_type >= DATA_PAGE && m_type <= UNDOFILE_HEADER_PAGE) || (m_type == UNKNOWN_PAGE && level == BASIC_HEADER)) failed. Values are 0 and 0.
Table error: Page (0:0). Test (m_freeData >= PageHeaderOverhead () && m_freeData <= (UINT)PAGESIZE - m_slotCnt * sizeof (Slot)) failed. Values are 0 and 8192.
Starting a few minutes later, the Agent Job named LSRestore_MyServerName_MyDatabaseName fails every time it runs. The generated log backup, copy, and restore jobs run every 15 minutes.
I fixed the immediate problem by running a copy-only full backup on the primary, deleting the database on the secondary and restoring the new backup on the secondary with NORECOVERY. The restore job now succeeds and all seems fine. The secondaries only exists for DR purposes - no one runs reports against them or uses them at all. I had a similar problem last weekend on a different database that is also replicated between the same servers. I've been here for over a year, and these are the first instances of this problem that I've seen. However, I've now seen it twice in a week on the same server.
View 0 Replies
View Related
May 20, 2014
I have been struggling with this one for awhile now.I have a domain group which only must view the steps and history of all agent jobs.I have added the group to the sqlagentreadergroup.I have created a new role and denied this role,add job,update job,delete job etc execute permissions.But the user still can change ,delete or create a new job.
All the groups and users in th new role,does not have sysadmin rights.
we have sql 2012 enterprise version
What else can i try.I need this for audit purposes.
View 7 Replies
View Related
Oct 2, 2014
I have a scenario where a customer is going to be using Log Shipping to the DR site; however, we need to maintain the normal backup strategy on the current system. (i.e. Nightly Full, Every 6 Hour Differential and Hourly Transaction Log backup)I know how to setup Transaction Log Shipping and Fail-over to DR and backup but now the local backup strategy is going to be an issue. I use the [URL] .... maintenance solution currently.
Is it even possible to do regular backups locally keeping data integrity for your backup strategy with Transaction Log Shipping enabled?
View 2 Replies
View Related
Sep 28, 2007
Hi,
We have the followoing:
-A "master domain" AD, a "sub domain" AD, a trust relationship between the two (sub trust master)
-A sql server 2005 on a win server 2003 in "sub domain" AD
-A linked server to "sub domain" AD
-A linked server login using a "sub domain" admin acccount
-A view to this linked server
-A grant on masterDomain/Domain Users to the database
-A grant on subDomain/Domain Users to the database
-We want all connections done through "Windows Authentication" not "Database Authentication".
Queries on the view work fine using "sub domain" user accounts.
Queries on the view fail using "master domain" user accounts (including master domain admin accounts)
"Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "ADsDSOObject" for linked server "ADSI" reported an error. The provider indicates that the user did not have the permission to perform the operation."
All connections are done through "Windows Authentication" not "Database Authentication".
Can we establish cross domain connectivity with "Windows Authentication" ?
Below are details of the implementation:
SELECT TOP (100) PERCENT *
FROM OPENQUERY(ADSI,
'SELECT displayname, givenName, sn, cn (etc...)
FROM ''LDAP://OU=PEOPLE,DC=subDomain,DC=com''
WHERE objectCategory = ''Person'' AND objectClass = ''user'' ')
EXEC sp_addlinkedsrvlogin @rmtsrvname ='ADSI', @useself='false',
@rmtuser='subDomainAdminAccnt', @rmtpassword='sunDomainAdminAccntPassword';
In SQL Server Mngt Studio in Server Objects/Linked Servers/Providers/ ADSI properties security tab I have:
"connections will: <be made using this security context> Remote login:'subDomainAdminAccnt' With password: 'subDomainAdminAccntPassword'
Error:
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "ADsDSOObject" for linked server "ADSI" reported an error. The provider indicates that the user did not have the permission to perform the operation.
Msg 7320, Level 16, State 2, Line 1
Cannot execute the query "SELECT displayname, givenName, sn, cn
FROM 'LDAP://OU=PEOPLE,DC=subDomain,DC=com'
WHERE
objectCategory = 'Person'
AND objectClass = 'user'
" against OLE DB provider "ADsDSOObject" for linked server "ADSI".
View 7 Replies
View Related
Apr 5, 2007
I have a root domain and child domain.
After using ADMT to migrate the domain user or group into the root domain, when I use enterprise manager to try and change the permissions allocated to that domain user/group, i get the 'Error 15401 NT user or Group not found'.
This is a correct error as the user is now in the root domain, however sql (in sysxlogins) still thinks its in the child domain.
Is there a simpler way, other than collecting the users permissions, deleting the user from SQL then adding back in with the correct domainusername format, then adding the permissions back?
I tried renaming the 'name' in sysxlogins (not recommended) and while that worked, whenever I tried to add the migrated user to another database, the login name was missing and would not resolve.
I believe it is something to do with the SID not matching.
Any ideas on how to fix this ?
View 1 Replies
View Related
Jun 19, 2015
we recently migrated from our in-house domain to the Enterprise domain. Everything went smooth except for the fact that I can no longer accept my dBs using my SA or my domain admin account. There is only 1 account I can get into the management studio with but it has no admin privileges, so I can't make any password changes or add accounts. I don't have a test environment so kind of hesitant to experiment with our production system.
View 6 Replies
View Related
May 13, 2007
Hi
I could not able to find Forums in regards to 'Log Shipping' thats why posting this question in here. Appriciate if someone can provide me answers depends on their experience.
Can we switch database recovery model when log shipping is turned on ?
We want to switch from Full Recovery to Bulk Logged Recovery to make sure Bulk Insert operations during the after hours load process will have some performance gain.
Is there any possibility of loosing data ?
Thanks
View 1 Replies
View Related
Apr 20, 2015
I have not used log shipping before and find myself in a position where I need to reboot the secondary node and then the primary node and I don't actually need to failover.
Is there anything I need to be aware of. When rebooting the secondary node I assume the transactions will be held in the primary nodes log till the secondary comes back and just carry on once back up?
When rebooting the primary node nothing needs to be done and the log shipping will just start again once it has come back?
View 3 Replies
View Related
Jun 11, 2014
I would like to do partitioning one of my client, but that primary database is participating in log shipping.
If I do partitioning on primary, automatically apply those changes on secondary db? if not, what is the way?
Note: I am adding new filegroups and ndf file in different drives on primary database.
View 2 Replies
View Related
Jun 8, 2006
Hi,
I 'm sure I am missing something obvious, hopefully someone could point it out. After a failover log shipping, I want to fail back to my inital Primary server database; however, my database is marked as loading. How can I mark it as normal?
I did the failover as follow:
I did a failover log shipping from the 2 server Sv1 (Primary) and Sv2 (Secondary) by doing the following
1) Stop the primary database by using sp_change_primary_role (Sv1)
2) Change the 2nd server to primary server by running sp_change_secondary_role (Sv2)
3) Change the monitor role by running sp-change_monitor_role (Sv2)
4) Resolve the log ins - (Sv2)
5) Now I want to fail back - I copy the TRN files to Sv1 - use SQL Ent to restore the database at point in time. The task is done; however, the database is still mark as loading. I could not use sp_dboption.
I appreciate any suggestion.
Thanks in advance
View 5 Replies
View Related
Sep 26, 2006
I'm trying to run a test from my test environment which is a non-domain Windows 2000 server to access my domain 2003 with SQL2005. I have install 2005 tools to try to access the SQL server.
- I have try following the KB265808 - no success.
- Reading alot of blogs and it seems all are pointing to the same problem. "Remote access" but the settign is enabled.Error Message:
TITLE: Connect to Server
------------------------------
Cannot connect to ardsqldatawh.
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=53&LinkId=20476
Question: Could Windows 2003 security be blocking access? I'm using sa account to access.
Also, sa account does not seems to work for remote access. It is ok when accessing locally.
Any help would be appreciated.
949jc
View 1 Replies
View Related
Jul 20, 2005
Hi all,it happen to me a strange problem:i have a mdb file (in Access 2K) with SQL Server 2K linked tables whoruns on a workstation which is on a different domain that the SQLServer. It works.If i create a mdb file from a workstation which is a the domain of theSQL Server and then i run it a my non-domain workstation i have errormessage:Login failed for user '(null)'. Reason: Not associated with a trustedSQL Server connectionBut if i reattached my tables it works.If someone have an idea....PS: same ODBC on both machines
View 1 Replies
View Related
Mar 2, 2006
Currently running a SQL 2000 server in 2000 domain and want to migrate it to a new 2003 domain of the same name.
How do I go about it and is there any problems with this plan?
View 1 Replies
View Related
Jul 11, 2007
Hi
I'm trying to set up replication from one SQL server to another.
The publishing server is not a member of a domain and is located in a hosting center (but we have full control over the server). I can set up a Snapshot publication just fine.
The subscribing server is located in another remote location and is a member of a domain. Here I can also set up the subscription without errors.
The errors, I think, comes when the snapshot is about to be created, the error is, on the publisher server:
[298] SQLServer Error: 18456, Login failed for user 'NT AUTHORITYANONYMOUS LOGON'. [SQLSTATE 28000]
And the snapshot is not created.
Is it even possible to set up replication like this. I need to transfer the data from one sql server to another so we have a working "backup" so to speek if the other server does not respond.
View 1 Replies
View Related
Jun 21, 2002
Could somebody please guide me on how best to Implement SQL Server Log Shipping. I have gone through BOL without luck. Thanks.
View 2 Replies
View Related
