I have been using AlwaysON AG for a long time now and currently have about 10TB of data across 120 databases and 3 AG groups for any application that is on SQL 2012 with great success. Each AG group is running on patch level 11.0.5058.0 with 2 synchronous replica(on different SANS) in Primary Data center and 1 ASYNC replica in DR. Migration has been a non-issue because none of the databases weren't substantial enough that I could not fit into my maintenance window which is 12-4AM on SAT morning.
My issue is that my last application to migrate to 2012 includes a 4TB TDE encrypted databases database which is about 10x larger than any of the previous ones I have migrated. The database takes 4 hours to backup after tuning extensively(I hate TDE!!)
The restore to the primary replica is instant because of seeding incremental but the issue comes from having to backup the database before adding to the availability group. 4 hours is my exact outage window and I can't get any more. My plan to migrate application is to -
First Outage Window
1) Restore Database from 2008 to 2012 Primary Replica
2) Change application ARECORD(or cname not sure which) to Primary replica
3) Run database on single node until next outage window
Week Later
1) Add database to availability group
2) Change ARECORD/CNAME to listener
What I don't like about this is I am going an entire week with 1 node instead of 3 which is worrisome. How to accomplish this I would love to hear from you or any type of comment from people who have worked with VLDB in availability groups and what you like/hate/loved about doing it. I am trying to go all in on this software and have loved it so far but getting worried when it comes to the VLDB migration.
need to migrate a cluster with an AG dtabases to new data center cluster with AG.
I was wondering if is possible to do mirroring on top of the AG configuration? or what other options could be to migrate a cluster that has 3 nodes and setup the ag databases to a new datacenter.
I've got an availability group with multiple databases, replicating to multiple secondary servers. On one of the secondary servers, some of the databases are not synchronising, and when we try re-establish the sync we get an LSN error. I can't see any obvious way to re-establish only one database on one secondary without affecting all databases on that secondary or affecting that database on all secondary nodes.
The options I seem to have are to either remove the database and then re-add it, in which case this affects all secondary replicas, or to remove the secondary replica and add it, in which case all the DBs are added.
PROD1(cluster 1) Clustered SQL instance1 PROD2(cluster 1) DR 1 (cluster 2) Clustered SQL insatace 2 DR 2 (cluster 2)
I have set an availability group up from the PROD instance to the DR instance.How does the AG behave if a SQL instance fails at PROD? Does it try to fail over to Node 2 on Prod before going over to DR? or bring the Replica at DR online straight away? Can we only use Manual Failover of the AG in this scenario to make use of the High Availability of the Windows cluster?
I have set up a couple of servers in a SQL 2012 AlwaysOn Availability Group (non FCI). I have also configured a Listener which enables SQL clients to connect to the server currently servicing the database, as expected.
I would also like non SQL clients to be able to connect to the server currently hosting the database so that they can run scripts sitting in a share. I don't have a shared disk so just have a directory share on each server with the same scripts in each directory.
I am able to ping and RDP to the listener IP address/name and end up on the correct server but am unable to connect to the share ListenerNameShare. Is that actually supported? If it is, any thoughts on what I need to do to get it going. If it isn't what other options do I have?
So I have Availability groups configured as well as the Availability Group Listener, what If I want to change the port that the listener is listening on, do I need to reboot the server or is it dynamic across the board ?
We are planning to upgrade our production servers from mirroring to alwayson. Our current mirror setup gives the advantage that it can failover a single database.To have a similar setup in alwayson we are probably going to create an availability group per database. Any other disadvantage in this except for the extra initial configuration work?
I have 2 servers in a SQL Server Fail-Over Cluster. IOW I use always-on availability groups. I run backups - full, diff and log - regularly via SQL Agent on one server only depending on which is primary. If there is a fail-over, then backups will continue on the other server. If I have to restore a database in an availability group I probably would need some combination of full, diff, and log backups from each server. Would that actually work? I test the backups weekly however I just realized that I never tested that scenario.
I have a Customer running a database in a High Availability Group and I am not familiar with the set up... They have a transaction log that quadrupled in size during a data import and update which was generated by an external application. They have limited server space and would like to shrink the log again now as this import / update only happens once a year. The way this has always been dealt with in the past was by shrinking the DB and logs after the update.
Now however, when attempting to do a log or db shrink, an error message is generated which says that the log cannot be shrunk as the DB is in use as part of an Availability Group....
The more I search and try to read up on this subject, it looks like the DB has to be removed from the Availability Group before the log can be shrunk and then the Availability Group has to be re-created or restored in some way. Is there a simple solution to this conundrum?
Let's say I have a two node AG, Server A and Server B. Server A is normally the primary and Server B is the replica. Whenever the primary fails over from A to B or from B to A, I'd like to automatically run a script that will restart the SQL Agent service on the new replica.
I've been working with sql server for some time, but couldn't find any way to fix this problem without rebooting the production and secondary sql servers, which is not very good for uptime .
I'm running a primary and secondary availability group on sql 2012 enterprise edition on windows server 2012, and it runs fine except when a network outage occurs.
Then the handshaking keeps failing, and the secondary databases all show not synchronizing.
The primary DBs all show synchronized.
I tried following several different troubleshooting guides for always on, but nothing I tried fixed the issue.
The only way to get them in sync is to reboot both primary and secondary. Just rebooting the secondary didn't fix it.
The secondary server error log showed AlwaysOn Availability Groups connection with primary DB established, then DB mirroring login succeeded, then error 35250, the connection to the primary replica is not active, then connection timeout.
I increased query connection timeouts to 60, but that didn't work.
automatically replicates new databases to Availability Group partners - if you do a little prep work on your environment first.To make it work:
1) Create linked servers on all group members pointing to all other servers in the group, with names matching the hostnames they represent. 2) Ensure suitable credentials (or 'current context' impersonation) for linked servers. Also: Enable RPC and RPC OUT 3) Run the DDL code below. 4) Schedule hadr_replicate_queue on [master] to run as often as you want initial syncs to occur. Every 5-10 minutes is plenty for most purposes. 5) Connect to an availability group listener and call CREATE DATABASE :)
I use a slightly more extended version of this code at home to do things like permissions synchronization across replicas - I essentially allow applications to install direct to an availability group replica and then have all the relevant objects replicate to other nodes. I don't really like going through manually and doing things, even though there's an AddIn from SQLSkills for management studio - it still requires manual intervention.
The main use I have for this at home is that I'm using the Azure pack, and want to automatically ensure that my newly created 'SQL Server Cloud' databases are highly available, plus it means when I install a non-alwayson aware product it doesn't require any extra work afterwards to allow failover to another machine.
* AlwaysOn Self-Population Script * By: Steve Gray / steve@mostlyharmful.net * Usage: Free, but buy me a beer if you're ever in Brisbane. **/ USE [master] GO IF EXISTS (SELECT * FROM sys.tables WHERE name='hadr_pending_replicate')
I've setup a two node Cluster Server (non-shared storage) with a file sharing witness. I'm testing some of the different failover scenarios to see that everything is working properly. Everything works fine until I try testing the failure of the SQL Server service. When I stop the SQL Service on the primary server, it fails over to the secondary server as expected. I then start the service on the (now) secondary server and it comes back online as the secondary server. I then try to test that the service will fail back over when I stop the service on the new primary server.
However, when I stop the service, the secondary server now shows "resolving" and never comes back online. When I bring the service back up on the primary server, the secondary now shows as secondary instead of resolving. So to see if it's something about failing over from one server to another, I do a manual failover making the original primary server the primary again and everything is as it was originally.
I then stop the service on the primary server, but the secondary server now says resolving and the AG will not become available again until I start the service on the primary server.
It seems that when I first configured the quorum it worked fine the first failover scenario, then stopped working. I then added the file sharing witness, and failover worked the first time again, but not after that. For some reason after the initial failover it won't automatically failover again after that.
Config:
Servers: Windows Server 2012 Standard SQL : SQL Server 2012 Enterprise SP1
I came across an issue while migrating from SQL 2005 to SQL 2012 and using AlwaysOn Group. For some strange reason, when ever i connect to the Listener name for each AlwaysOn group, it list all the databases which is on the SQL instance, so i would be able to see databases that is not part of that Availability Group. I am not using default port, so have to put the port after the Name to connect and both Instance and Listener are using different port. Testing the fail over works fine too, when i perform a manual failover, i can connect to any of the databases in the group from my application with no problem.
Considering that the Listener Port is different to the port which the instance is using?
I have a HA Listener which is visible and can be connected to, it has a read only secondary on a different subnet so when connecting to it we use the applicationintent = readonly and multisubnetfailover = true.
Trying to connect it as a linked server is giving me problems. I tried putting the extra info into the provider string but keep getting the failure to initialise error. I am trying to link SQL2012 to a 2012 HA group but will also need to connect from a sql2008 server as well
We are rolling out the use of Availability Group listeners to our SQL Server 2012 Environment which has a 2 node multi-subnet cluster. The Primary is R/W and the Secondary is a non-readable node that would be manually failed over to in a DR scenario
I have set up the AGL and asked the sysadmins to create a DNS record in both subnets with fixed IP's.
The issue I have having is that when I ask the app developers to connect to the databases using the AGL it is totally random whether the AGL resolves to the Primary or DR node - as a result that are having problems getting their apps to connect.
I was thinking of asking the sys admins to remove the DNS record in the DR subnet and then add it back in should we need to fail over - but I was thinking there must be a better way.
I got this situation where my network admin observerd that there is a high network utilization between 2 nodes in our AG (the primary node & the DR site, 2 separate locations of course); then he advised to compress the data transfer between those 2 nodes as the previous DBA already did that before!
Ok, I have no clue about this, so decided to google it, got nothing. My backup is already compressed through some third party app (just in case if that matters to the subject).
I am setting up Availability Groups and I want to use the secondary replica to perform the full copy_only backups to reduce the load on the primary replica.But what is the best way to check for successful full backups on Availability Group databases?
Previously I could check the system table msdb.dbo.backupset but this is not available for copy_only backups.So I wonder how people are monitoring that their full backups have been successful?
Do you just check that the SQL Agent job that runs the backup was successful?
Or do you search the SQL Server Error Log for entries like "Database backed up. Database: xxx" where database xxx is in an Availability Group?
Setting up a test AlwaysOn Availability Group for one database.
However, whenever I restore the database to the replica server and join it, it ends up with my user account as the owner of the database.
Obviously I do not want a user account as the database owner, but since it is read-only I cannot modify it directly. If I were able to fail the AG over to the replica, I could change the owner then, but I cannot due to business requirements. this AG is to essentially serve as a replacement to log shipping.
I tried doing the backups and restores using EXECUTE AS login = 'sa', and yet it still shows up as my user account.
i am preparing for always on with multiple instant.is there any consideration with multiple instant ? with each instant shall i create new availability group?
We're having an issue with an AG where the the log backup does not appear to truncate the log. symptoms..Run full backupRun transaction log backup DBCC Loginfo shows all VLFs with a status of 2sys.databases.log_reuse_wait_desc says LOG_BACKUPOPENTRANS indicates no open trans.All backups are being run on the primary.
SQL 2012 EnterprisePrimary server and 2 x secondary serversWindows 2012 R2
I have removed one of the database from availability group by mistake. Luckily I am still operational with primary server. database on secondary servers are on restoring mode.
I have done full backup of database from primary (prod) server and restored on secondary servers with no recovery when I add database into availability group I get an error message log missing what is the best method to achieve and add database again into availability group.
Note I cannot restore database on primary server as it is on production
How do I add my second (secondary) node in my AlwaysOn Availability Group, after adding my head node, and the secondary node is a virtual machine. See based on the attached file if it is the correct way?
I am in the process of rolling out a pair of SQL 2014 servers. I have setup an Availability Group, Listener and databases. It's my understanding that I will be giving the listener name to our developers so that they can do their work. In testing, I noticed that If I am using Studio Manager and connected to the the AG using the listener name, when I setup a user in security the user is only added to the active primary node. Is there a way to add a user to both servers in one shot instead of having to install on both servers?
I have MasterDataServices installed on a server and the database is in an AlwaysOn Availability Group.The MDM front end currently is set up incorrectly and is referencing NodeA (primary node) for its database.I want to fix this but im unsure if i should:
-point the MDM front end to the cluster name, so it wont matter what server the databsae is on? -create an Availability Group Listner, which would also decoupple the database referenced from a particular server.
In our(my company) current design we want to switch from failover clustering to Always On as high availibility solution.
I am currently testing the availiblity Group Listener function and have two questions regarding this.
First of all, is it possible to connect to a a listener by just using its "name" instead of "name,port", it is for our users very inconvenient to start using ports. If this is possible, where can I find information on how to configure this?
Second, is it possible to use the Availiblity Group Listener as loadbalancer or in combination with a loadbalancer to split the users over two or more nodes?*note we don't use azure.
