SQL 2012 :: Reset For Connection Pooling VS Login Failed For User XXXX
Aug 5, 2015
We are facing issue on one of our databases on Availability Group replica. FYI, please refer the below messages we are receiving. Moreover, the errors don't happen consistently for the specified user.
The client was unable to reuse a session with SPID 420, which had been reset for connection pooling. The failure ID is 46. This error may have been caused by an earlier operation failing. Check the error logs for failed operations immediately before this error message.
Login failed for user 'XXXX'. Reason: Failed to open the database 'YYYY' configured in the login object while revalidating the login on the connection. [CLIENT: aa.bb.cc.nn]
hi, so i have a new box and I'm trying to get my websites and SQL Server 2005 Standard Edition working on it, but the pages give me the following error when I try to load them: "Cannot Open Database "XXXX" requested by login. The login failed. Login failed for user 'xxx'" Everything seems exactly the same settings and user-wise from my old box to my new one, but nevertheless everything I've tried gives me the same error. I've tried creating new users in SQL Server and giving them appropriate permissions to my database. I've even tried just using the built in 'sa' account. Nothing seems to change the error, except when I give it the incorrect password then it just says 'login failed' This leads me to believe that i'm successfully logging into the SQL Server, but it doesn't want to give me access to the database I'm requesting access too. But "apparently" the account i'm using should have access to the database. If nothing else the 'sa' account should, but that didn't work either. I'm stumped. Any ideas?
hi, i am getting the following error message while i am trying to login to the SQL Server 2005 on my vista laptop. i installed the server with dual authentication modes.
Login failed for the user'xxxx'(Microsoft SQL Server 2005. Error:18456)
if you have solution for my problem please send a reply as early as possible.
We have a SQL 2000 Active/Passive cluster running on Windows 2000. On one node, everything logs in fine (second node is powered off). I can use local authentication fine in OSQL (-E) and even see my connection in SQLEM current activity as [DomainUser] for the NT account which I am logged in as. Then I bring the second node online and initiate a failover. SQL Server starts but Cluster Admin cannot connect and starts throwing this Anonymous Logon error. I open a command prompt and try the same OSQL (-E) local login and sure enough it is also giving the Anonymous Logon connection user. I do not understand why the failover to a second node is causing the Trusted Connection Local authentication to switch to Anonymous instead of the [DomainUser] which I am using. Any help is appreciated. John.
Sir i am trying to connect sql from my LAN to my networked computers but whenever i tried to register it through Enterprise manager i get following "SQL Server registration failed because of the conection failure displayed below.Do you wish to Register anyway? Login failed for user 'SW17/Guest'
where SW17/ is my another computer name... i have checked tcp and named pipes and confirm username for sql authentication too please help me as i being late submit my project
i'm using the Enterpirse library logger to write logs into a database. When choosing connection string i choose the database i want in the "connection properties" dialog box and push 'Test connection' button. everything goes well.
then i open the SQL Server Management studio express and connect to the databse to check some things, from that point on , when i push the 'Test Connection' button in the Enterprise library i get the error:
"cannot open user default database. Login failed. login failed for user My'server/MyuserName'"
even when i close the sql server manager , it is still stuck - the connection test doesn't work anymore.... it only work when i restart the computer.
I posted the long version of this over on the ADO.NET framework group: http://groups.google.com/group/microsoft.public.dotnet.framework.adonet/browse_thread/thread/51597180ec77f543/70e804505c2df829#70e804505c2df829
The short version is:
In .NET 2.0 SP1, Microsoft have deprecated the "Reset Connection" connection string API which, when set to false, stops connection pooling from calling "sp_reset_connection" on connections drawn from the pool. We need this for our DB security: we "EXECUTE AS" on connection open and since we cannot tell when it will close (passed to 3rd parties and there is no useful "closing" event), we must "REVERT" the connection next time it is drawn from pool e.g. OPENS. We must do the revert before sp_reset_connection is called or SQL Server kills the connection (security violation) - we accomplish this by keeping track of connections' SPIDs. We implemented this using EL DAAB + custom SQL provider which handled connection open event. Now it is entirely broken!
This all worked fine in .NET 2.0 RTM when we could control when sp_reset_connection was called (could delay until after revert). Now I've run out of options and will have to rewrite the entire security infrastructure. What I'd really like is a decent "closing" event on SqlConnection (statechanged will fire after close - too late!). As I asked in the full post above.. how are we expected to build scalable apps with the features that Microsoft tell us to use when they don't work together?
How can I REVERT my connection before it is sent back to the pool?
If any of this isn't clear, please see above linked post.
Hi, I have a copy of VS2005 and i have installed the Microsoft SQL Server Developer Edition I am trying to do my first connection using ASP.net (yay for me...) and it has failed...with this error..Login failed for user 'testuser'. The user is not associated with a trusted SQL Server connection.
can someone please point out why? yes i know that the error seems pretty straight forward but how do i fix it? like how do i make the user a trusted server connection? where do i do it? and what are the steps? the user is an administrator and by rights should have all access to everything....
connection string
SqlConnection MySQLConnection; MySQLConnection = new SqlConnection("server=cmptrname\databsename;uid=testuser;password=password;database=mytest");
btw while your reading do you have any examples of opening a db with the connection string in the web.config file? because i get some error "connection string has not been initialised" using the system.Configuration.ConfigurationManager.AppSettings.Get i though i would stick to the top code first before i tackled the web config error first....
All the research I found dealing with this problem is that the solution is to set SQLserver to mix mode. I have SQL server already set to mix mode. I am not sure what else to do. Has anybody run into this problem? my connection string: <connectionStrings> <add name="ConnectionString" connectionString="Data Source= server name ; Initial Catalog=FILESHAREDB.MDF; Integrated Security=false;"providerName="System.Data.SqlClient"/> </connectionStrings>
Server Error in '/SendItNow' Application.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Login failed for user ''. The user is not associated with a trusted SQL Server connection.Source Error:
Line 41: Line 42: 'open the connection and execute the stored procedure Line 43: mConnection.Open() Line 44: mResourceID = mCommand.ExecuteScalar() Line 45: mConnection.Close()Source File: H:MIS DepartmentIntranetSendItNowApp_CodeDalResourceDB.vb Line: 43 Stack Trace:
Hi all, I am new in asp.net. In my web.config file, I wrote the connection strings as below and then I got the above error. I already changed SQL server Authentication mode to "SQL server and Windows". Any idea? Thanks in advance. <connectionStrings> <remove name="LocalSqlServer" /> <add name="LocalSqlServer" connectionString="Data Source=xxx;Initial Catalog=mydb;User ID=test;Password=test;Persist Security Info=False;" providerName="System.Data.SqlClient" /> </connectionStrings>
We have setup a SCOM 2007 Server and in this we have SQL 2005 SP2, We are using two accounts one for OPRATIONAL DATABASE and another one for REPORTING DATABASE after this setup everything was working fine but suddenly my SDK account which is for REPROTING DATABASE was locked by entering wrong password and afterwards I unlocked the password but SINCE this i'm not able to connect to my REPORTING DATABASE and i'm getting following ERROR:- Login Failed for user 'username'. The user is not associated with a trusted SQL Server connection.
Taken following action to rectify this problem: 1) Resetting the SDK password with the same password. 2) Restarted all the SQL and SCOM services. 3) Restarted the Server as well. 4) Converted from WINDOWS AUTHENTICATION mode to MIXED mode.
But the problem is still persisting, Please help ASAP.
I received the above error yesterday and haven't been able to trace it to any job or process running. We haven't implemented any changes to the server in the past few months, and it doesn't look to be a user-established connection, since the Client IP Address of the SSPI handshake error is from the server itself.
I logged this set of messages in SQL AgentServer error log:
Date 10.03.2008 6:15:19 PM Log SQL Server (Current - 11.03.2008 2:32:00 PM) Source Logon Message SSPI handshake failed with error code 0x80090304 while establishing a connection with integrated security; the connection has been closed. [CLIENT: <IP Address>]
Hi all, Can someone explain it to me why I am getting the following error when I try to connect SQL server express with .NET 2.0?
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Login failed for user ''. The user is not associated with a trusted SQL Server connection.Here is my code and i am using windows authentication: <%@ Import Namespace="System.Data" %><%@ Import Namespace="System.Data.SqlClient" %> <% Dim connAkaki As SqlConnection Dim cmdSelectAuthers As SqlCommand Dim dtrAuthers As SqlDataReader connAkaki = New SqlConnection("Server=.SQLEXPRESS;database=akaki") connAkaki.Open() cmdSelectAuthers = New SqlCommand("select Firstname from UserTableTest", connAkaki) dtrAuthers= cmdSelectAuthers.ExecuteReader() While dtrAuthers.Read() Response.Write("<li>") Response.Write(dtrAuthers("Firstname")) End While dtrAuthers.Close() connAkaki.Close() %>
I've seen many, many, many, many posts regarding this topic - but none have been able to fully explain nor fix my problem.I've developed a security solution according to Scott Gu's guide and it works great - but only on my local machine running VWD and SQLExp2005. Once I move this application it completely breaks in the productions environment. Today I managed to get it halfway there. I created a SQL login and changed my web.config to use these credentials - now the web application will come up, but none of my links (that are role based) are displayed - most likely because i'm authenticating as the SQL credentials instead of me. So I switch it back to windows authenticated, as it is on my laptop, and it breaks again. Please tell me theres a way to get this working in production and Scott's fantastic tutorial hasn't wasted me 2 weeks of work. Here's the exact error I get when using Integrated authentication: Server Error in '/Contracts' Application.
Login failed for user ''. The user is not associated with a trusted SQL Server connection. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Login failed for user ''. The user is not associated with a trusted SQL Server connection.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
Hello, I just got a copy of a website I was supposed to be working on. I went to the web.config file changed the machine name to my machine's name and when I try to run the program I get the following error. Could someone give me some advice on how to fix this ? Thanks!
Hi I'm making a website and will upload it next via ftp but i need to access the local server for database retrieval from this website. i'm doing so first time so not sure about its working and isues. Through google search and from forums i collect some info to work on it. now i have made a connection string to access remotely that gives the following error when i make the connection open "Login failed for user ''. The user is not associated with a trusted SQL Server connection." the local server use the windows authentication mode or may be the mix mode. Please any one can help me about this issue and further information related to it. and one more question, how much time a page takes to load while getting 600 records from a table in local server. thanx in advance
Arrgh! I've check and to make sure SQL Server and Windows Authentication option is selected. The user has Grant access to connect to database engine and Login is enabled...and also has database read/write privs. I can login using the username/password from Mangement Studio Express, but I can't from my app. Here is my web.config: <connectionStrings> <add name="CPT_ConnectionString" connectionString="Data Source=192.168.1.40ccsql1;Integrated Security=SSPI;" providerName="System.Data.SqlClient" /> </connectionStrings> <system.web> <identity impersonate="true"></identity> </system.web> The only thing I can think of is that my app is using a DSN to connect to the database. Any ideas? Many thanks, Mark
How to handle "Login failed for user 'sa'. The user is not associated with a trusted SQL Server connection." when i was access to web page. I want to on sql server authecation mode.
hello i am working on a web application where the application and data base are not on the same serverso when trying to connect to the data base from the web application using windows authentication i got that errorLogin failed for user ''. The user is not associated with a trusted SQL Server connection. when i used user id and password the problem solvedcan any one tell me how to make my application run using windows authenticationone thing else ;this problem raised after another issuse came from the network that the server is not able to resolve the address or ip of the serverbut that problem solved suddenly and left the above issue
I have a windows 2003 server hosting MS SQL Server 2005. Another windows 2003 server hosting my App, and clients from the local intranet and outside (web). How do I surpass this problem, when it all works fine locally on my development machine?
We are wanting to use SQLEXPRESS in a workgroup called REALITY, no servers just PCs. I have four PCs in this workgroup and need them all to share the same database from one of the PCs. I can share folders and map a network drive but can not connect to the SQLEXPRESS database remotely.
I have set server authentication mode to Windows and SQL and have enable local and remote connections (TCP/IP only) in the surface area. After making these modifications I was able to connect to the database through the SQL Server Management Studio Express after I enable the guest account. When I first started I had numerous connection errors and have worked through them all by performing the above and was only finally able to connect after enabling the guest account and adding said account to the SecurityLogins. However, today I am unable to connect I have double and triple checked the settings and still continue to receive the same error.
I installed SQL Server express edition on my corporate desktop computer which is part of a Domain. When I installed it I set it up for mixed mode so I could log into SQL server directly or use Windows authentication. I use the management studio and log into the server using the sa account which I have added a password for but I can not log in using the Windows authentication. The error in the subject line of this post was copied directly from the error log as you can see the user name is null.
The following is more of the same log file it seems to start with the SSPI handsshake error. Does anyone know how I can troubleshoot this error?
2007-08-16 17:37:21.76 Logon Error: 17806, Severity: 20, State: 2. 2007-08-16 17:37:21.76 Logon SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: 10.246.108.98] 2007-08-16 17:37:21.77 Logon Error: 18452, Severity: 14, State: 1. 2007-08-16 17:37:21.77 Logon Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: 10.246.108.98]
I am trying to login to SQL Server 2005 using SQL Server authentication using 'sa' account but it gives the below error
'Login failed for user 'sa'. Not associated with trusted SQL Server Connection'
The authentication mode set for the server was 'Windows Authentication' so i tried to change that to SQL Server and Windows Authentication but it didnt allow me to change the mode. It gives the below mentioned error.
"An exception occured while executing the Transact SQL or Batch Statement. Execute permission denied on Object 'xp_instance_regwrite' , database 'mssqlsystemresource',schema 'sys' "
Could you anyone kindly let me how to resolve this issue so that i can connect to the SQL Server using sa account.
Can someone explain it to me why I am getting the following error when I try to connect SQL server express with .NET 2.0?
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Login failed for user ''. The user is not associated with a trusted SQL Server connection.
Here is my code and i am using windows authentication:
Hi when i try and open a database in sql server management studio i get the error "Cannot open user default database. Login failed. Login failed for user 'DOMAINUser'. (.Net SqlClient Data Provider)", what can i do to rectify this, i have googled around and still havent found no answers.
Hey Microsoft: this affects development that will eventually sell a lot of seats on SharePoint Server 2007. If you guys and gals can't straighten out this mess, you can't expect custom solutions with custom web parts. So pay attention for your own good. Yes, SPS 2007 is what this is all about. I've created simpe web parts and deployed them, same VS 2005, but I need local development and debugging for more complex stuff. I'm really disappointed that you have no solution for this problem.
I've seen other posts on this, but the result seems to be the same: if you fix it, it's by accident, not by design.
1. I created a blank ASP.NET web site
2. I added a web part manager
3. I added a web part zone
I get the error described above. I have no idea why SQL Server settings are so screwed up.
I've tried all the stuff in the other posts - security settings, command line installation, etc. None of those worked.
The default template(s) don't copy anything into App_Data, nor create an empty folder. I don't know why that is. I have other web sites working just fine, but they use remote SQL databases, or local ones I created, and didn't need profile management (no forms authentication, no web parts, no web zones).
I've also started out with a local database, using SQL Authentication, later moving it to a remote server, and never had any problems. The SQL Server developer edition and Express seem to work just fine. I can also debug stored procs when the .mdf is in App_Data. So the problem isn't one of connectivity.
What would cause the default screw-up? This would seem to point from all directions to a problem with Visual Studio (2005)? The installation is defalt - perhaps some extras included (copy local), but nothing unusual. AJAX for ASP.net is installed, but not used in the above "default web site" trial. Likewise Syncfusion's tools, which work fine on other developer workstations at this same location, all of which are from the same image (purchased at the same time & imaged). That web parts work on other boxes, running all the same management tools (anti-virus, remote sys admin/sms etc.) makes none of those suspect.
I think Microsoft needs to have a clean problem solution and publish it. SP1 certainly doesn't fix it. What's worse is the stupid, lame error message. "I can't open the default database". Well, what did you try? What do you think the default is? What settings are you using? Why is there no debugging information other than the usual worthless trace information showing it's all deep within the ProviderBase and SqlClient namespace code? How is that supposed to be helpful?
If anyone has anything solid, not guesses, I'd like to know.
