SQL 2012 :: Restoring BAK File To New Database
May 15, 2015
I am trying to restore a database called BCC_DB (I'm actually just needing one table opened to find some data in one column) so I created a blank database called BCCrestore.
I have a .bak file called BCC_DB_backup_201505020017.bak.
I placed it in my local drive C:BCC_DB_backup_201505020017.bak and tried the SQL:
RESTORE DATABASE BCCrestore FROM DISK = 'C:BCC_DB_backup_201505020017.bak'
GO
I get an error:
Msg 3201, Level 16, State 2, Line 1
Cannot open backup device 'C:BCC_DB_backup_201505020017.bak'. Operating system error 2(The system cannot find the file specified.).
Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
View 9 Replies
ADVERTISEMENT
Feb 27, 2014
I have created the file group for my database.First i took backup of individual file group(mdf and ndf) then I tried to restore only secondary(ndf) file group.I got error like
Restore failed for Server 'pcnameSQLEXPRESS'. (Microsoft.SqlServer.SmoExtended)
File 'regSQL_dat' was not backed up in file 1 on device 'D:vtndf.bak'. The file cannot be restored from this backup set.
RESTORE DATABASE is terminating abnormally. (Microsoft SQL Server, Error: 3144)
When i tried to restore only primary file group i got the same error.
Can i restore individual file group? I
For the purpose of data archiveng,i have taken back up of ndf file (it contains very old data) & i have removed this file from database.Now my customer asking these file data.Now i have to again attach/restore this ndf file.how to attach/restore.
View 1 Replies
View Related
Sep 23, 2014
Been asked to restore an orphaned MDF file leftover after a botched uninstall - no .bak file. Tried to reattach, but got an error, I don't think it had been detached. My initial answer was, "No, very likely can't be done".
Am I right? Or is there a way of attaching it that doesn't require it to have been detached?
View 4 Replies
View Related
Mar 5, 2014
I have clustered SQL server machines(SSserver1 and SSserver2). I need to restore a database from another standalone server to this clustered environment. In this case do I need to restore the DB on both the nodes that are part of the clustering(SSserver1 and SSserver2) or Just can I do it on one of them?
View 5 Replies
View Related
Mar 2, 2001
I have a MSSQL7 data file mydata_data.mdf that I would like to load into my MSSQL7.
When I try to restore to my database, I got an error message saying MSSQl does not recognize the file as a valid backup file.
Your help is greatly appreciated.
View 1 Replies
View Related
Jul 20, 2005
Hello.Can anyone tell me if a SQL Server 2000 database can berecovered only from the MDF and log files ?I have no backups.Thanks in advance
View 1 Replies
View Related
Oct 4, 2006
how 2 restore database in MS SQL 2005 using .mdf & .ldf file
View 4 Replies
View Related
Sep 24, 2007
Hello everybody!
Does anyone know how to restore a database from a .dmp file? I'm using the SQL Server Enterprise Manager to do that.
I've searched within the program, but i didn't find anything.
Thanks.
View 5 Replies
View Related
Oct 19, 2015
Every once in a while a scheduled restore of a production database backup to a development server will fail with the following error.
RESTORE cannot operate on database 'XXX' because it is configured for database mirroring or has joined an availability group
While it is true the production database is involved in database mirroring, the development server does not have database mirroring enabled. This error tells me something within the backup is telling the development server the database is configured for database mirroring.
However the perplexing part for me is that we only receive this error maybe 5% of the time, if that, and only on a couple of our databases. We have numerous other restores of mirrored production databases to development servers that have never produced this error. So my question is what is causing this error to occur, and why is it not happening all of the time? We get around this error by deleting the DEV database and re-running the restore job.
View 0 Replies
View Related
Jul 6, 2015
I have a database with deployed CLR assembly on SQL 2008. I recently took a backup for the database and restored it on SQL 2012 server. Everything worked fine except very strange working of CLR assemblies functions.The result of the function is very odd. It manipulates the numeric string and return the result. It is returning very strange result on SQL 2012 as compared to SQL 2008.Example SQL 2008 ManipulateString('1234') returns 2345 On SQL 2012 the same call returns 1155.I am also trying to deploy the same assembly to SQL 2012 server database. I have successfully register the assembly, but the database do not list the exposed methods.
View 5 Replies
View Related
Oct 30, 2007
Hi all,
My question is:
If I need to restore a database when all I have is the backup file, do I need to recreate all the tables, or is it possible to restore into a new database ?
Is it possible to restore a sql server 2000 database into a sql server 2005 database ?
Thanks in advance.
View 2 Replies
View Related
Mar 7, 2008
Hello,
I have just installed sql server 2005 in a windows server 2003 server.
i tried to create a new database from a backup file. after selecting the backup to restore i got the net message.
Restore failed for Server '<ServerName>'. (Microsoft.SqlServer.Smo)
ADDITIONAL INFORMATION:
System.Data.SqlClient.SqlError: Directory lookup for the file'<D:file name.mdf>'. failled with Operating system error 2(The system cannot find the file specified.). (Microsoft.SqlServer.Smo)
i found some information about and it says that it has something to do with the sql writer service i tryed stopping the service but i could not restore the db.
any recomendations to restore this database.
thank's
Michael
View 1 Replies
View Related
Nov 15, 2015
We are trying to restore from a backup (.bak) of a sql 2005 database with full text catologs to sql 2012.
We are getting errors saying that the backup file context are different from what we are trying to restore to, even if we try to create a new database from the backup.The new database is just a test database. The source is a production database with full cataologs.
The normal restore from a bak file does not seem to work.
We dont need the full text catalogs in the new database, but cannot change settings in the source production database.
Is there a way to take a backup of the sql 2005 database without the full text cataologs being included ? , without changing setting in the source database beforehand ?
View 2 Replies
View Related
Oct 30, 2007
I am newbie to SQL database.When I try to restore the SQL database using the Restore database option in SQL server 2005 following error occurs
Restore failed for Server 'MANASIDSQLEXPRESS'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Restore+Server&LinkId=20476
ADDITIONAL INFORMATION:
System.Data.SqlClient.SqlError: The backup set holds a backup of a database other than the existing 'KAM_Manasi' database. (Microsoft.SqlServer.Smo)
If the back up file contains files other than I want to restore, how can I restore the files I want in my database?
Please help ,its argent.
View 3 Replies
View Related
May 13, 2004
I am moving a database from one server to another. I am going to replace the old server to the new one. I heard that you can move the datfiles and put them in the same directory, and sql server will pickup the datafiles based on the system tables. Is this possible, and what are the steps to get this to work. Thanks for the help in advance.
View 4 Replies
View Related
Sep 6, 2007
I want to read certain data from the backup file of MS SQL 2000 without restoring the database backup file. Based on the data selected I will manage the further functionality such as restoration of the backup file.
Is it possible to read some data from MS SQL 2000 backup file without restoring? If yes then please let me know how?
View 8 Replies
View Related
Aug 12, 2015
I wonder how do I shrink log file in a specific database which in Mirror/Synchronized/Restoring state..So that database is in Mirror server ( High availability ).
View 4 Replies
View Related
Jan 9, 2007
I did a full backup of a db from one server(Express2005) and trying to restore it to a different instance of SQL2005 on the same development machine. (Also had some fulltext columns if that means anything)
Many failures but finally got it to report all was successful except the icon in Object Explorer shows (Restoring...) with no indication of any real activity going on. It's a tiny database with hardly any data in it.
Just not sure what the heck is going on there. It also won't let me into the database until this the (Restoring...) goes away.
Any advice on how to get this thing finished out?
View 3 Replies
View Related
Jul 9, 2014
Last week I backed up my SQL Server by using BE 2012. I named the file "SQL Server BAK" which contained copies of my SQL Server databases. A few days ago I lost some part of my data due to accidental deletion. I backed it up, so I tried to restore the database from the .bkf file. The problem comes here, when I try to to restore my .bkf file, it becomes inaccessible.what causes this?
View 7 Replies
View Related
Jul 10, 2014
I am receiving the below message however when going into my database properties and going into 'File' it's set as either unrestricted growth for the log files or 2097152MB limit and the log files are only taking up about 3gigs.
Could not allocate new page for database. There are no more pages available in the file group.
Database log file is full. Back up the transaction log for the database to free up some log space.
Could not allocate space for ojbect in database because the filegroup is full.
how I can resolve this and give it more space?
View 3 Replies
View Related
Jul 10, 2015
Recently i got task from Senior DBA, as : Recover a database without LOG file Currently Data File is available.
Log file is also available, but shows size as 0 KB. Means Log file is corrupted.
Currently existing DB is shown as Offline Mode in SSMS.
So i got below link:
[URL]
When i tried 1st/2nd solution from above link, i got below message:The log cannot be rebuilt because there were open transactions/users when the database was shutdown, no checkpoint occurred to the database, or the database was read-only. This error could occur if the transaction log file was manually deleted or lost due to a hardware or environment failure.
To try that 3rd solution, I had to DELETE/Remove existing DB from SSMS, so i can create New DB with same name.
When i tried to delete Log file from Command Prompt, using below command, Windows replied that File is corrupted, so it cannot be deleted.
DEL /F /Q /A C:Program FilesMicrosoft SQL ServerMSSQL11.SQLEXPRESS2012MSSQLDATAMyDB.ldf
Meanwhile my Senior DBA brought DB in Recovery Pending mode.
So if i want to go for 3rd solution,then i need to DELETE file, But Windows is not allowing me.
[URL]
View 3 Replies
View Related
Sep 2, 2007
Greetings, I have just arrived back into the country (NZ) and back into ASP.NET.
I am having trouble with the following:An attempt to attach an auto-named database for file (file location).../Database.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
It has only begun since i decided i wanted to use IIS, I realise VWD comes with its own localhost, but since it is only temporary, i wanted a permanent shortcut on my desktop to link to my intranet page.
Anyone have any ideas why i am getting the above error? have searched many places on the internet and not getting any closer.
Cheers ~ J
View 3 Replies
View Related
Apr 21, 2014
finding the database size from the backup file.I have SQL 2012 backup file, is there any way to find the estimated database size from the backup.I tried restoring , i got an error saying " no space need additional xxx bytes " ...does this error gives the exact space needed to restore ?
One more question....one of the backup file size is 7.2 GB, when i try to restore it ....it throws error saying it needs 292GB extra space while only 100 Gb is available. How come 392 Gb sized database becomes 7.2 Gb .bak file ?
View 5 Replies
View Related
Jul 10, 2014
I am receiving the below message however when going into my database properties and going into 'File' it's set as either unrestricted growth for the log files or 2097152MB limit and the log files are only taking up about 3gigs.
Could not allocate new page for database. There are no more pages available in the file group.
Database log file is full. Back up the transaction log for the database to free up some log space.
Could not allocate space for ojbect in database because the filegroup is full.
how I can resolve this and give it more space?
View 1 Replies
View Related
Jul 14, 2014
I have a production database which uses merge and snapshot replication. The Merge is for 3 tables. The snapshot is to update the rest of the data once daily. I use a Full recovery model and perform database backups (full, differential) and transaction log backups.
I have a database optimization plan which runs 4 times a week. This plan performs and integrity check and rebuilds the indexes. This optimization plan is growing the transaction log by about 8MB each time it is run and we are running out of space on the drive for our log files. The space is not being reused.
I saw in another post where Gail Shaw suggesting using SELECT name, log_reuse_wait_desc FROM master.sys.databases to see why the log space is not being reused. On the database in question, the above returns "REPLICATION".
A colleague tried to backup the transaction log a couple of times to truncate the log this weekend. She was going to perform a DBCC Shrinkfile command afterwards. But the truncate failed. Again looking into things it seems replication prevented the truncation.
We are looking at stopping the merge replication or even removing it to truncate the log file and then recreate the merge replication. How to handle shrinking the log file for now and then seeing if there are any checks or changes I can perform which will allow the transaction log space to be reused.
View 7 Replies
View Related
Nov 28, 2014
I run MSDE on a Windows XP Server and my database was marked as "suspect" by Enterprise Manager and its icon become gray. I detach that database and try to re-attach it but there is an error as the following:
Error 3624:
Location : page.cpp:2801
Expression: rowLength >= offset + deleteLenght
SPID : 56
Precess ID:1612
After that, I uninstall the MSDE and re-install new MSDE SP4 and try to re-attach the database file again and there is still an error. Is there anyway i can recover the data from that database?
View 4 Replies
View Related
Dec 11, 2014
I know this is easy but I am having trouble creating a database from a backup file.
I created a database (Test).
Then I selected 'Test', went to Tasks and selected 'Restore Database'.
I selected 'Device' browsed to the backup file.
I choose the destination database to be 'Test'.
There is no backup sets listed to restore. The 'OK' button is disabled.
How do you get the backup list to display? This is a new database. I don't need a backup.
View 5 Replies
View Related
Jul 15, 2015
I need to create a new db from a backup file of an allready existing database (vehicledb) on this server.So i created a new database with name "vehicledb2" .But when i try this, the backup says that this file is used...The backup set holds a backup of a database other than the existing 'Vehicles2' database. Restore of database 'Vehicledb' failed.
View 9 Replies
View Related
Aug 13, 2015
I have accidentally taken the backup of a database twice into same .bak file. Now the file is twice the size. Will it be fine if I restore this backup? Or will I screw up any data?
View 1 Replies
View Related
Sep 5, 2007
We have 2 SQL Server 2k5 servers running the same build - 9.0.2047 . When I backup any database from one server and attempt to restore it to the other, the log file generally increases by 100 fold. It errors out after I try to restore a 100MB db and it tries to create a 9.8GB log file. This happens both when I use the GUI to restore and when I restore from a T-SQL script. What am I doing wrong?
Thanks in advance.
View 1 Replies
View Related
Mar 31, 2015
I need to move the log file of a disk and onto another disk. The log belongs to a merge subscription database.
I was going to stop/disable the merge jobs on the distributor, detach the database, move the log file to another drive, reattach, and enable the merge jobs on the distributor.
Does that sound ok, or should I employ some other method.
View 6 Replies
View Related
Apr 14, 2015
I need to increase the file size for a mirrored database. I am new to using mirroring for replication. Will increasing the file size break the mirror?
View 2 Replies
View Related
Mar 24, 2015
How to estimate the size of datafile while creating the database?
View 2 Replies
View Related
