SQL 2012 :: SSAS Actions Not Appearing In Excel 2010?
Nov 28, 2012
I have an SSAS cube that i want to add some actions to. I've had problems adding a reporting action to the cube so decided just to add a URL action instead. Start simple and build on the concepts...
So i add a new action, give it a name, set the Target Type to Cells, Taget object to All Cells. I've put no condition on the action since i want it to appear all the time.
The action content type is set to URL the action expression is set to [URL] I've also set a caption of "Google" under the additional properties and said that the caption is MDX (I'm aware that it isn't but i do intend to expand on this...).
I then build and deploy my cube, call up excel (2010) and then create a pivot table off the back of the cube but when i right-click the cells in the pivot table and go to "additional actions" it tells me that there are none specified.
I have a cube where i would like to define some actions. I have done report Actions but they are limiting in terms of what i am trying to achieve.I want a popup window from the action from relevant cells at the moment i can use the urlaction type to open the link in a new window which is ok but i want this as a popup.
I used sql server 2012 express Import and Export Data (32-bit) wizard to import data from excel 2010 to a given table. But I got the following error message: Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Unspecified error". (SQL Server Import and Export Wizard)  Error 0xc020901c: Data Flow Task 1: There was an error with Destination - MPRecord.Inputs[Destination Input].Columns[Top1] on Destination - MPRecord.Inputs[Destination Input]. The column status returned was: "The value violated the integrity constraints for the column.". (SQL Server Import and Export Wizard)  Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "Destination - MPRecord.Inputs[Destination Input]" failed because error code 0xC020907D occurred, and the error row disposition on "Destination - MPRecord.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure. (SQL Server Import and Export Wizard)  Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - MPRecord" (35) failed with error code 0xC0209029 while processing input "Destination Input" (48). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
I have a test server (TEST1) running SQL 2012 and Windows 2012R2. One of the developers wants to use OPENROWSET to read in data from an Excel 2010 file (an xlsx file).
I have loaded the Microsoft Drivers in "AccessDatabaseEngine_64.exe" and enabled the Ad Hoc Distributed Queries option in SQL.
This is the sample code we are working with:
SELECT X.MEMBID FROM OPENROWSET( 'MSDASQL', 'Driver={Microsoft Excel Driver (*.xls, *.xlsx, *.xlsm, *.xlsb)};DBQ=etworkserverFolder1Folder2MEMBIDs.xlsx', 'SELECT * FROM [Sheet1$]' ) AS X
I can run the sample query from my laptop with SSMS (I have admin rights) and I can also run it as SA from my laptop. So all is good, right?
But if I RDC into TEST1, I cannot run the query. I get this error:
OLE DB provider "MSDASQL" for linked server "(null)" returned message "[Microsoft][ODBC Excel Driver] Your network access was interrupted. To continue, close the database, and then open it again.". OLE DB provider "MSDASQL" for linked server "(null)" returned message "[Microsoft][ODBC Excel Driver]General error Unable to open registry key Temporary (volatile) Ace DSN for process 0x574 Thread 0xb74 DBC 0x1d07f08 Excel'.". OLE DB provider "MSDASQL" for linked server "(null)" returned message "[Microsoft][ODBC Excel Driver]General error Unable to open registry key Temporary (volatile) Ace DSN for process 0x574 Thread 0xb74 DBC 0x1d07f08 Excel'.". Msg 7303, Level 16, State 1, Line 1 Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "(null)".But wait! It gets better.
I can run the query as SA from TEST1.
And of course, the developer can't run it either.
And it works fine in the production server.
I'm thinking the basics are there but something isn't right in some permission somewhere.
I have over 600+ Excel .xlsx file that I have been trying to import to Sql database table. I've been trying to complete this task with SSIS but no luck yet. I have seen several videos and read articles but when I run the package the source is validated but I always get an error in the destination. I am using Excel 2010 and SQL Server 2012.
So I use Excel 2010 connect to a cube I have built. Â Then I change some values in the cube via my ETL and re-process the cube. Â Then I verify that record is NOT there in the fact table - check!
However, when I refresh the worksheet where the pivot table is pulling data from the cube, but that old record wont go away!
Just realized my cube data source on the dev server, was in fact still configured with my local workstation name. Once I updated that, processed the cube all was well.
have just implement Microsoft Dynamics NAV. and I'm trying to learn how to use this Excellent tool powerpivot add on, But when I'm trying to connect it to any SQL table that support Dynamics NAV I have an error message while downloading the table :"do not have enough memory or I should use Excel 64 bits instead 32 bits".when I check CPU memory Utilization we are just using less tha 20%. I'm working on a remote server and the using Excel 2010.
I have package which pulls data from db table and creates a excel file extract.The flow is like this - A excel file template sits in the input folder folder for processing .The package starts by dropping excel sheet in the excel(which is clearing any data and columns available) once that is done it has script task which creates a new columns for the sheet and gives a sheet name as well .Then a execute sql task runs and pumps data into a table which serves as a source for the excel extract process .The excel extract process involves pulling data from the table and doing data conversion before it moves it into the oledb destination (excel file on file server).When I run the package I go and see that data is pushed down . I see top rows say 100 are empty and data appears after say 100 rows .
I tried deleting excel file and replacing with new one empty with columns and sheet name only but still it doesnt work?I am trying to understand what is making ssis behave like this and what can I do overcome the problem ?I read on google that we need to bring in file system task will move a template to working directory which is input folder but I dont want it to incorporate that logic as we need to push this package to production ASAP with very minimal change.
I have been using database mail for quite a few years now. I started using it with SQL Server 2005 and then it worked fine. Then we went over to SQL 2012 and the problems started. At first I could not get any e-mails out and read a post by Microsoft that a patch needs to come out but not available yet. That was in 2012. Presumably the patch came out with windows updates and my DB Mail started working. Now, however, I have the problem that some e-mails do get sent but the majority failed.
I use this so that whenever a user captures certain data to update a person's status on the database then an automatic e-mail will be sent to that person to inform them of their status at this company.
I've built a fairly straight forward report in RS that looks normal in preview mode and in PDF format with out any issues.But when I export it to Excel report header is not appearing in each page.Any ideas as to why this is occurring?thanks in advance,Ramesh KS
I am trying to install the MS SQL Server 2012 Failover Cluster on Windows Server 2012 . I successfully Installed the Failover cluster instance on my primary node.
But when I am running the installation process on passive node to add node in the failover cluster I am stuck with very unique kind of issue.
I am following the Standard process of Installation and I am getting the same windows for each next process, but after License Agreement window when I get the Cluster Node Configuration window, then in "SQL Server Instance Name" drop down box I am not getting the Name of Instance which is already installed on the primary node. But this Instance complete information is appearing in below given box.
Only issue is Instance name is not appearing in the drop down list, that's why I am not able to select and when I click on next it trough error and do not proceed.
When I try to connect from excel , to SSAS Getting error message like
A Connection attempt failed because the connected party did not properly respond after a period of time or established connection failed because connected host has failed to respond.
If I connect to SSIS , I'm able to connect correctly.
Why I'm getting this error and how to overcome this?
However, now we face a different challenge. Running the same data through the SSAS Linear Regression model and the Excel Regression [Data Analysis] tool we get different answers:
Intercept -3.57537
x 0.242462
z 0.353668 SSAS: Intercept -2.95188545928199 x 0.201587406861264
z 0.371940525462092
In Excel we set up the Regression analysis using the 95% confidence interval. Is there a concept for confidence interval for linear regression in SSAS?. Since we are doing this for a company that has been using Excel for years, I do not think such a difference in results will be accepted...
Is there anything else we can do to ensure the answers are close? Must we then have to work around and call these calculations from Excel?
I am working with SSAS Tabular. I have a stand alone table with 60 columns and contains 120K records. Table size is 250MB. And trying to build a tabular report out of it and it is taking longer and throwing exception, screenshot attached.
It might be cross-join issues, as workaround created a dummy measure and using in report. But it working for 10-20 k records and beyond throwing same exception. I have 8 GB RAM and 100 GB free disk space.
Im trying to pull a workbook which has a power pivot into SSAS using a remote tabular instance through visual studio 2013. However Im getting an error saying, " We cannot import the workbook XXXXX.xlsx. Try placing the work book on a server that the service account of DBNAME/Tabular has permission to read and that can be reached with a UNC path (//<server>/<shared>/<file>)". Here DBNAME is the server name and Tabular is the instance name.
I tried changing the logon name in SQL server analysis services(Tabular) in Services.msc Microsoft console.Also tried changing the logon to local system. Still the error persists.
I have a Tabular data model and I'm returning a measure that counts employees (each row is an employee) and then a calculated column in the model that gets SeniorityInMonths.
So if an employee was hired exactly 1 year ago, they would have 12 in this column.
I want to group these into bins, but the Group option is grayed out.
I'm exploring creating local cube files, .cub from an excel sheet with tables.Would SSAS be able to create one cube from taking data from a 1 way table (A, B, C), a 2 way table (AxB, BxC, AxC) and a 3 way table (AxBxC)?
The all-level of dimensions doesn't show up in the PivotTable Field List? I have reports where I want to show one member of a dimensions compared to the total of the dimension (and not the total of the members shown). But I can't select the ALL-level. Is there any way to do this?
I have connected to SQL SERVICES ANALYSIS SERVICE database through excel and when I observed that value of the date attribute is displayed as ######## in the excel for 1/1/1753.
I am able to see the value 1/1/1753 in the Cube browser but not able to see the vale in the excel.
how to replace this value with blank in the excel.
I€™m having a problem with Excel 2007 DM and SQL 2005 and I hope someone out there has a solution.
Consider the following environment:
Windows XP SP2 or Windows Vista, Excel 2007, Data Mining Add-in, SSAS 2005 (with session mining models enabled, an AdventureWorksDW cube deployed and drill-through actions available).
Now take the following steps:
1. In Excel 2007 set up a connection to SSAS
2. Connect to the cube and create a new pivot table report (drag and drop whatever you like)
3. Right-click on one of the cell values in the data region and either select a drill-through action, or, select Show Details in the context menu
4. Ensure that you have at least 10 detailed records that are generated on a new worksheet page; you should have a time-based column in your detailed records
5. Select the table of detailed data, then select the Analyze tab (within the Table Tools grouping) which appears in the topmost menu above the ribbon
6. Click the Forecast button in the ribbon and choose both the field which you want to predict as well as the time-based column (from step 4) as well as the number of time periods to forecast
7. Finally click OK.
1. Having followed these steps on both WinXP SP2 and Vista, I keep coming across the exception: HResult:0x800A03EC. Any ideas as to why this exception pops up? If I was using a normal table of data (which was not generated from a Show Details or drill-through action), then the Forecast button works fine.
I googled it and thought the localization settings for SSAS 2005 and Excel 2007 needed to be the same (initially they weren€™t). I€™ve tried removing the auto-filters which appear atop each column in the detailed data table prior to clicking the Forecast button, and, I€™ve also tested for a series of data across a number of time periods with the same result.
Also, a colleague of mine discovered that the column headers that appear by default from a drill-through start with "$[", and, in removing them the Forecast function appears to work.
I would have thought there would be a seamless transition in Excel 2007 between data retrieved from a cube and the DM Add-in featueres (or at the very least, a more meaningful exception message than the one presented).
Is there something I€™ve missed, or, is there a KB article I haven€™t come across yet? As I know for a fact that the problem is reproducible, is there a fix to this problem on its way to us? Is there a useful workaround that doesn't require manual intervention?
I had a pivot to pull data from cube previously.The pivot had certain measures which are now set as invisible measures at the cube level itself.After the cube publish,i just reconnected my pivot to the cube so that the new measures and dimensions are shown in the field list.
I just tried refreshing the pivot with my old measures(which are now set as invisible) and it allowed me to refresh.How can this be possible if the measure itself is set as invisible at cube level?
Is there any way to track the information about the  connections to SSAS cubes through local  Excel files (BI usage).
OPreviously, we are tracing the information about the BI usage through the BI SharePoint site. Now we want track the users who are using through local excel files .
Recently migrated from 2008 to 2012. Everything is working fine; however went to take my first set of backups today and one of them blew up:
Executing the query ...
Backup and restore errors: Unexpected number of disk files associated with database object. Possible cause for that is missing or corrupt cryptokey.bin or detach.log file.
Execution complete
Not finding much online on the specific error.
- Data source is valid - Can process the cube - Can query / navigate cube
Next step would be drop/recreate; however this is an older cube that I'd prefer to leave alone at this stage if possible.
Is there a way to determine when the SSAS Service last restarted? preferably a [mdx] query like you can do with the DB engine using a T-SQL query but any method that does not going to the servers OS and checking would be fine.
I've built a robust looking Calendar dimension but that's easy because its all so well structured. Every date belongs to a particular week and every week belongs to a particular month and every month belongs to a particular quarter etc. January 1st is always going to be a member of week 1, month 1, quarter 1.But here's the rub, real life isn't as predictable and stable as a calendar.
Lets say you have an table containing personal information. You might have gender and marital status in there and even though they both relate to one person, they're unrelated to each other so how do you put those in a hierarchy? Which one goes first and which second because you can get combinations of either.
I know how to create an alias for a SQL server instance, so instead of MyServerMyInstanceName, I can type MyInstanceName into my SSMS connection box. But SSAS does not allow me to connect with the alias.
I've looked all over and found plenty of documentation that SQL 2005 and 2008 doesn't allow the use of instance aliases for SSAS. I've even found notes from Microsoft saying "we'll fix this in a future edition." I have not found any indications or notes as to whether or not this has been fixed.
Can aliases be created for 2012 SSAS? Or is this still not available?
how to move the dimension attributes from currency to geography and vice versa(i.e need to change their positions) in SQL Server 2012. i need currency to be placed in top of geography or geography below currency.
