SQL 2012 :: SSIS OLEDB Source Date Parameter
Sep 22, 2015
Passing a date parameter in a stored procedure through OLEDB Source (Data flow task). We have a multipurpose stored proc in which one of the many expected parameter is a date. It keeps giving me the following error:Description: "Operand type clash: int is incompatible with date"- although there is no integer.
One way to fix it would be change the data type from date to datetime in proc but I can't do that since it is multi-purpose proc. I didn't find anything good on the net.
View 2 Replies
ADVERTISEMENT
Jun 23, 2006
Hi,
I have problem to extract data from DB2 table using SSIS dataflow task with OLEDB source selecting the data access mode with command. Here is the scenario.(Note:If I select the data access mode as a table then it works fine.)
If I use the data access mode as SQL Command then it is not working. i.e. the flow stays yellow in controlflow nothing happens in dataflow and I noticed the SQL dumper and proc completes. I couldn't find any log to verify the issue including the package execution results.Any of your thoughts will help me to resolve this issue.
Thanks..Mako
View 1 Replies
View Related
Sep 13, 2007
Hi Friends,
Inititally we were using ODBC driver for DB2. My reports we working fine(preview mode) with date type parameters.
But When I changed it to OLEDB driver for AS400 DB2 it is throwing the exception while previewing the same report.
Driver Name: "IBM DB2 UDB for iSeries IBMDA400 OLE DB Provider"
ERROR Message: "The parameter fromDate doesnot have expected value?"
Please help me.
Thanks in advance
Novin
View 1 Replies
View Related
Jan 3, 2007
HI,
I'm trying to get data from AS400. using OLEDB source as my connection. i'm using IBM OLEDB provider for iSeries. and working on standard edition of SQL Server 2005.
While using OLEDB source task when i set my access mode to 'table or view' and try to see list of available libraryname.tablenames, i do not get and tables
where as when i use Data access mode as 'SQL Command' i can get data (can only see preview of data) from AS400 but not able to insert that into my destination table. At run time task Fails with the error mentioned below.
I have configured Data links tab inside the OLEDB connection manager also, but when tried to set a default library it gives me error. : "Error code :CWBZZ5042" - ( catalog is invalid ) but it does exist.
Is there some settings that needs to be done from AS400 side or SQL Server side to view the available libray and its tables ?
Can some one help me on the same.
thanks in advance
Shah
Error Message received when executed with SQL command:
Error: 0xC0202009 at Data Flow Task, OLE DB Source [1]: An OLE DB error has occurred. Error code: 0x80040E00.
Error: 0xC0047038 at Data Flow Task, DTS.Pipeline: The PrimeOutput method on component "OLE DB Source" (1) returned error code 0xC0202009. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.
Error: 0xC0047039 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039.
Task failed: Data Flow Task
View 4 Replies
View Related
Oct 26, 2007
Hi,
I'm trying to use query parameters with an Oracle OLEDB Source in a data
flow task and I'm having problems.
I've tried formatting the query each of the following ways...
--
select
frq_code,
frq_name,
update_frq,
uptime_frq
from frequency_bcs
where update_frq > ?
and update_frq <= ?
--
Parameters cannot be extracted from the SQL command. The provider might not
help to parse parameter information from the command. In that case, use the
"SQL command from variable" access mode, in which the entire SQL command is
stored in a variable.
Additional information
---> Provider cannot derive parameter information and SetParameterInfo has
not been called. (Microsoft OLE DB Provider for Oracle).
View 7 Replies
View Related
Apr 26, 2007
Hi,
Urgent Help required..........
Can anyone explain me steps how to parameterized query to send oracle.
If you know any other control which help to do this rather than OLEDB source.
Please let me know.
THanks
View 18 Replies
View Related
Apr 20, 2015
I am working to archive some old data from a data warehouse using SQL server and SSIS. The data will be read and denormalized, then shipped out to a delimited text file.
The rowcount of the incoming data is significant, call it 10M+ rows per unit of work (one text file).
There are development advantages of using a stored proc for the data source - mainly ease of changing the denormalization logic as required. Wondering if there are performance advantages of an embeded query for the data source instead?
It was mentioned by one developer that when using a stored procedure, the output stream from the proc and subsequent SSIS steps cannot start until the full procedure processing is complete; i.e. the proc churns out its' result set in one big chunk.
He hinted that an embedded query does not have this same effect, but I am not sure that is accurate.
View 4 Replies
View Related
Apr 3, 2007
Thanks for any one can give me a help.
I am try to transfer some tables data from one database server into another database server. I create a package in SSIS, and I use a variable to pass each table name. In Data flow, I use a OLEDB Source, but I cannot set the Data access mode to Table name or view name variable. Ever time, I will get this following error info "===================================
Error at Data Flow Task [OLE DB Source [31]]: A destination table name has not been provided.
(Microsoft Visual Studio)
===================================
Exception from HRESULT: 0xC0202042 (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.ReinitializeMetaData()
at Microsoft.DataTransformationServices.DataFlowUI.DataFlowComponentUI.ReinitializeMetadata()
at Microsoft.DataTransformationServices.DataFlowUI.DataFlowAdapterUI.connectionPage_SaveConnectionAttributes(Object sender, ConnectionAttributesEventArgs args)".
Some one can tell me what is the reason, or give me some examples.
Thanks in advance.
View 7 Replies
View Related
Oct 10, 2006
Hi all,
I got an error when i do an OLE db Source pointing to an sql 2000 database and executing a sql query inside the OLE Source. The ole source will point to an OLE DB destination which is an sql 2005 database.
But i got the below error:
Error at Data Flow Task [OLE DB Destination [245]]: the column firstname cannot be processed because more than one code page (936 and 1252) are specified for it.
Error at Data Flow Task [DTS.Pipeline]: "component "OLE DB destination" (245)" failed validation and returned validation status "VS_ISBROKEN".
Error at Data Flow Task [DTS.Pipeline]: One or more component failed validation.
Error at Data Flow TaSK: There were errors during task validation.
(Microsoft.DataTransformationServices.VsIntegration)
View 5 Replies
View Related
Feb 19, 2015
I have a SSIS pkg that gets data from SQL and do data conversion and Insert into OLE db AS400 destination, There is a flag column in SQL table , that has to be updated to true, once the records are inserted in AS400 how do i do that in SSIS
SQL oledb ---------> dataConversion ---------------> AS400 OLE db Destination
|
update SQL table Flag column<---------------------------------|
View 9 Replies
View Related
Apr 16, 2014
I have an source file and i have to load it into the data base by changing datatype of the columns in ssis
View 1 Replies
View Related
Feb 29, 2008
Each day I receive a file with a different name. For example, the name is filename_mmddyyyy.txt where filename_ stays constant and mmddyyyy is the date of the file. The file is always in the same format.
I want to build an SSIS where I pass it this file name. I can write a script to generate the correct file name. How do I build the SSIS so it can accept the input parameter and find the correct file to process?
Thanks
View 3 Replies
View Related
Aug 13, 2014
I am working on task where I need to load data into DWH from OLTP. Load needs to b incremental load. For this I am planning to use CDC, to track changes and only load data which has been new inserts/updates/deletes. But to load data to destination, there are couple of joins, which I need to do. Is there a way in CDC, where I can use query as source?
View 0 Replies
View Related
Sep 1, 2014
I am a complete newbie to SSIS. I can create a simple package to transfer data between SQL instances and thats about it.
I have tableA (source data) and tableB (Destination data). TableA has 4 column and tableB has 5. I want to transfer all of the columns from tableA into TableB, but the 5th column in tableB needs to be populated with the ServerInstance name of the server TableA sits on. Do I need to have multiple data sources to achieve this? I have tried but no matter how I set it up, the Column in the destination is set to ignore.
View 2 Replies
View Related
Feb 17, 2015
I have a SSIS package that simply moves data from a SQL database A to another SQL database B. I have update (increased) the size of a nvarchar column, on both A and B.I am wondering if there is a way to "refresh" somehow the SSIS package so I don't have to rebuild and redeploy it.The error I get now is a truncation error: "Text was truncated or one or more characters had no match in the target code page".
View 2 Replies
View Related
Oct 9, 2014
I am trying to pass a date parameter to a stored procedure.
I pass the actual date as a string but keep getting errors that the string variable cannot be converted to a date whatever I do.
Basically, this works:
DECLARE @DDate DATETIME
SET @DDate = convert(datetime, '2004-01-01',101 )
But this returns an error:
DECLARE @strdate VARCHAR
SET @strdate = '2004-01-01'
DECLARE @DDate DATETIME
SET @DDate = convert(datetime, @strdate,101 )
What am I doing wrong?
View 8 Replies
View Related
Sep 17, 2015
How do you pass a value in a parameter to a variable ?
View 2 Replies
View Related
Aug 15, 2014
To set the scene I am using SQL 2012, in project deployment mode (SSIS Catalog rather than file system).I have setup an SSIS package to run a stored procedure which exports data for the last hour to a .tsv file and then FTP's the file to some other location via a sql agent job - This all works fine.However, I can see there may be a requirement to run the package with dates that need to be set i.e. in the event of a lost file of some other reason the package has not run and missed some of its hourly slots and the customer requires the files to be resent.
The stored procedure I am using has parameters for "DateOverride" - boolean), "start" and "end" dates (datetime) with defaults set "0" for "DateOverride" and null for the "Start" and "End" dates, I have built logic into the procedure which sets the dates if the parameters are null (as in the above to an hour before now). What I would like to be able to do (and this is to make it user friendly for support staff) is to be able to set parameters/variables in SQL agent with "DateOverride" set to "1" and the the dates I would like to be sent to the stored procedure "Start" and "End" parameters.
I did try using the parameters in SSIS which worked well when the values were true or false (0,1) but didn't work at all for the dates. If I left the dates as I had set them is SSIS it worked, but if I changed them (even if it was just changing the hour) the job errored/crashed and corrupted the job step leaving me the ability to only delete it.
View 4 Replies
View Related
Jun 19, 2015
I am using a OLE DB source task and i want to setup a parameter in the select statement. Is this possible and how would this be done. I know you can pass a parameter in the where clause like:
select id, lname, fname, startDate, endDate from Employee where id = ?
How would i set startDate and endDate as parameters as i would like to be able to change these parameters when running the package. I would like to set dates in the select statement as parameters like how you would in the where clause.
Select id, lname, fname, ? startDate, ? endDate, from employee where id = ?
I would like to be able to change these dates without having to go in to the package and hard code it back in there and then deploy.
The package uses a OLE DB source to Flatfile Destination.
View 2 Replies
View Related
Dec 7, 2014
I have define two variable of Datetime type @Sdate and @Edate.
1. @Sdate = DATEADD ("DD", -5, GETDATE())
2. @Edate = GETDATE()
3. Using Forloopcontainer for pulling the data into batches
( @sdate = dateadd ( "HH" , 1, @sdate))
Now since i am using getdate() to define @Sdate. my variable gets data as ( 2014/12/08 11:43:00AM)
Converting GETDATE( 2014/12/08 11:43:00AM) to only date 2014/12/08 00:00:00AM.
I tired using DT_WSTR which works fine (converting datetime int String).
Problem occurs when i am going through For Loop container . Since i have used assignment of @Sdate is says its not allowed.
View 9 Replies
View Related
Jan 15, 2008
I was having one package which uses a source query in OLEDB Source Control and fetches the record and a couple of lookups and then an oledb command to insert/update the records in the table using as SP. I changed the source query(Infact the package) and removed in lookup and a different SP was called similar to the old one. But my problem is the package which was before taking only minutes to update 50,000 records is now taking more than 2 hrs. The problem is the number of records it is fetching from the source each time is very less.. its fetching hardly 500 records a time compared to nearly 2500 records before. Where am i going wrong? Any suggestion greatly appreciated.
View 5 Replies
View Related
Feb 12, 2008
Hi,
I am running an MDX query in SSIS but I don't know what is the best way of doing this, performance wise.
I know I can run the MDX query through an openquery in the OLEDB, and also run it through a Datareader, no openquery needed.
I know the datareader is slower in a normal basis due to .Net, but in this case the OLEDB is running an open query to a linked server which won't be fast like running a regular SQL.
If anyone knows which of this two run faster in this scenario I'll appretiate if you let me know.
View 1 Replies
View Related
May 11, 2007
Hi,
Firtsly - I am new to SSIS if my approach could be improved then I welcome suggestions.
Scenario: I have a large SSIS package that consolidates / summarizes work week information from several data sources. Currently each data flow task in the control flow calculates the from and to date that is filtered on, for example:
DECLARE @FromDT AS DATETIME
SET @FromDT = CAST(FLOOR( CAST( DATEADD(D, -7, GETDATE()) AS FLOAT ) ) AS DATETIME)
DECLARE @ToDT AS DATETIME
SET @ToDT = CAST(FLOOR( CAST( GETDATE() AS FLOAT ) ) AS DATETIME)
I would like to remove these statements that appear in most steps and replace them with a global variable that is used throughout the package. This statement would only appear once & it would make the package much easier to run after failure etc.
Problem: I am using Data Reader Source with the 'SQLCommand' property specified. It looks like parameters are only supported if an OleDB connection is used?
So I switched to an OleDB connection and no parameters are recognised in the string - a forum search reveals that parameters in sub queries are not always found properly. The solution to this problem appears to be, to set 'Bypass Prepare' to True but this is a property for the Execute SQL task, not the Data Flow Task source.
Questions:
Does the Data Reader Source control from Data Flow Source toolbox section support parameters?
Can anyone suggest a fix to the OleDB Source issue with Parameters?
Is there a better way to solve my problem e.g. Using Execute SQL Task instead of Data Flow tasks etc
Example SQL:
This SQL is an example of the SQL for the OleDB Data Source (within a Data Flow task)
------------------------------
--RADIUS LOGINS
------------------------------
DECLARE @FromDT AS DATETIME
SET @FromDT = CAST(FLOOR( CAST( DATEADD(D, -7, GETDATE()) AS FLOAT ) ) AS DATETIME)
DECLARE @ToDT AS DATETIME
SET @ToDT = CAST(FLOOR( CAST( GETDATE() AS FLOAT ) ) AS DATETIME)
DECLARE @Attempts AS BIGINT
SET @Attempts =
(SELECT COUNT(*)
FROM dbo.Radius_Login_Records
WHERE LoggedAt BETWEEN @FromDT AND @ToDT)
DECLARE @Failures AS BIGINT
SET @Failures =
(SELECT COUNT(*)
FROM dbo.Radius_Login_Records
WHERE LoggedAt BETWEEN @FromDT AND @ToDT
AND Authen_Failure_Code IS NOT NULL)
DECLARE @Successes AS BIGINT
SET @Successes = @Attempts - @Failures
DECLARE @OcaV1Hits AS BIGINT
SET @OcaV1Hits = (SELECT COUNT(DISTINCT LoginName)
FROM dbo.Radius_Login_Records
WHERE LoggedAt BETWEEN
@FromDT AND @ToDT
AND EAPTypeID = 25)
DECLARE @OcaV2Hits AS BIGINT
SET @OcaV2Hits = (SELECT COUNT(DISTINCT LoginName) AS OcaV2Hits
FROM dbo.Radius_Login_Records
WHERE LoggedAt BETWEEN
@FromDT AND @ToDT
AND EAPTypeID = 13)
SELECT
@Attempts AS ConnectionAttempts,
@Failures AS ConnectionFailures,
(CAST(@Successes AS DECIMAL(38,2)) / CAST(@Attempts AS FLOAT) * 100) AS SuccessRate,
@OcaV1Hits AS OcaV1Hits,
@OcaV2Hits AS OcaV2Hits
Please remember, I'm new to SSIS - so be detailed in your response. Thanks for your help!
View 5 Replies
View Related
Jun 21, 2006
Iam migrating data from one database to another .I want give input of that source and traget database names through globally declared user variables (@sourcename,@targetname)
How i can map the variables in OLE DB Source ..i dint find any option to that .
Can somebody help ?
Thanks
Kumar
View 1 Replies
View Related
Apr 10, 2014
I have files which has date in file name and I want to load all files in sequential order.
Here I am giving you an example of my file name.
"NetworkActivity_869_403722_01-01-2014.log"
"NetworkActivity_869_403722_01-02-2014.log"
"NetworkActivity_869_403722_01-03-2014.log"
"NetworkActivity_869_403722_01-04-2014.log"
"NetworkActivity_869_403722_01-05-2014.log"
These are my files in that I want to load files sequentially means jan 1st, 2nd like this way.
View 5 Replies
View Related
Nov 11, 2014
I am working on FTP TASK in SSIS Package. i have to get files from FTP that file names are like 20141110.txt. i want to download any particular date file from ftp. How to i set expression in Remote path?
View 3 Replies
View Related
Jan 10, 2012
I am putting the below query in a OLEDB SOURCE through a variable (it is a select statement with a where clause from one date to another).
"select TestRecordtype, request_id from department
where LOAD_TMSTP between
(select max(END_TMSTP) LOG) and
(TO_DATE("+RIGHT("0" + (DT_STR,4,1252)DATEPART( "dd" , @[System:tartTime] ), 2) + "-"
+RIGHT("0" + (DT_STR,4,1252)DATEPART( "mm" , @[System:tartTime] ), 2) + "-"
+RIGHT("0" + (DT_STR,4,1252)DATEPART( "yy" , @[System:tartTime] ), 2) + " "
+RIGHT("0" + (DT_STR,4,1252)DATEPART( "hh" , @[System:tartTime] ), 2) + "."
+RIGHT("0" + (DT_STR,4,1252)DATEPART( "mi" , @[System:tartTime] ), 2) + "."
+RIGHT("0" + (DT_STR,4,1252)DATEPART( "ss" , @[System:tartTime] ), 2) +",'DD-MM-YY HH24.MI.SS')) "
View 1 Replies
View Related
Apr 29, 2008
I am debugging a Data Flow task in my SSIS package. When I run the package in debug mode, one of the OLEDB Data Sources turns red. I have rerouted all Error Output to a flat file, and put a Data Viewer on that path: no rows get sent. When I click the Preview button on this component in Design mode, I see the expected data and get no error messages. The connection does a simple table access...no SQL command. I don't see anything different between this component and other OLEDB sources in the same package that don't trigger any errors. I've tried dropping and re-creating the component with the same results.
What else can I do to debug this?
View 7 Replies
View Related
Mar 16, 2007
Guys,
I am having a nightmarish time getting an Oracle Connection Manager working as a source in my SSIS package.
The CM is called "OLTP_SOURCE". When I inspect the configuration and test connection, it succeeds, however when I go to run the package (both in debug mode and via DTEXECUI) I get the following error:
The AcquireConnection method call to the connection manager "OLTP_SOURCE" failed with error code 0xC0202009
After this happens, if I go into an OLE DB Source within a DFT, I get the following:
No disconnected record set is available for the specified SQL statement.
Now, if I go back into the CM, enter the password and test, it succeeds. From this point, I will go to preview the data in the OLE DB Source, and it comes back fine. However, when I go to run the package, I get the same error time and time again:
The AcquireConnection method call to the connection manager "OLTP_SOURCE" failed with error code 0xC0202009
The quick reader will suggest that the password is not being persisted. To this end, I have tried each of the following techniques to no avail:
1. Double, Triple and Quadruple check that the "save" password option in the CM is checked.
2. Hardcode the connection string in the dtsx XML-behind.
3. Enable Package Configurations and hardcode the connection string in the dstsconfig file.
4. Run the dtsx file using DTEXECUI, providing it with the configuration (that includes the hard-coded password).
5. Run the dtsx file using DTEXECUI, providing it the connection string in the Connection Managager override UI.
Can anyone help shed some light on what might be going on? So far, it is obvious that there has to be something that I am doing wrong because (syntax dialect differences aside) I can't imagine that Oracle sources should be this much of a headache.
Thanks,
Rick
View 3 Replies
View Related
Apr 20, 2006
A little background first. I have a header table and a detail table in my staging area/ods. I need to join them together to flatten them out for load. The Detail Table is pretty deep - approx 100 million rows.
If I use the setting (table or view) and set the table name (say, the detail table), the package starts up nicely. But if I switch the OLE DB Source to using a SQL Statement and then join the tables in the SQL, then the Pre-Execute phase of the package takes a VERY long time. I have waited as long as 30 minutes for this phase to complete, but it never finished.
Another twist...If I take the join select statement out of the OLEDB Source and put it in a view on the server, then swith the OLE DB Source to look at the view using the (table or view) mode, then the package gets through the Pre-Execute phase just fine.
Can someone go into detail as to what the Pre-Execute phase does and why a deep table might make it take a long time? I know already that the pre-execute phase caches the lookups, but not much else.
Any help?
Mark
http://spaces.msn.com/mgarnerbi
View 3 Replies
View Related
Jul 18, 2006
Hi,
at first...
Yes, I have seen this post http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=366077&SiteID=1 and yes, my Stored Procedure contains a "Set nocount on"...
:-)
My Stored Procedure contains variable SQL-Code to check a table (given by parameter) against some masterdata tables and I would like to write the result of the check to a flatfile to be able to send it via mail.
but evoking the Stored procedure brings up no meta data for the Flatfile Destination - the preview works...
any other hints?
except for doing the ckeck completely in SSIS?
:-P
cheers
Markus
View 1 Replies
View Related
Mar 14, 2008
Hello All,
I understand that the parser is having issues parsing my second command but I was wonder if anyone had stumbled on a work around for this:
-- OLEDB Source has no problem with this:
SELECT *
FROM some_table
where
last_update_dt = ?
-- OLEDB Source errors on this:
SELECT *
FROM some_table
where
Convert( char(12), last_update_dt, 112 ) = Convert( char(12), Cast( ? as DateTime), 112 )
The first SQL statement won't return the desired rows because of the wonderful time stamp, the second works well but the provider won't parse it. I have used the "SQL command from variable" to work around this but we have some tables with 200+ columns, so the only way to use the "SQL command from variable" is to do a select *, which I'm trying to avoid, for both performance reasons and company standards.
Any thoughts?
Thanks,
Raymond
View 4 Replies
View Related
Mar 31, 2008
i need to select data by using a very complex sql statement. when i use a ole db source componente and choose SQL command as data access mode the process never ends. but when i put the sql statement in an sql task component it works fine and fast. isn't an oledb source always based on an sql statement (select *)? so how is it possible that this component becomes so slow?
View 11 Replies
View Related
