SQL 2012 :: SSIS Variables Stored On A Database
Jul 3, 2014
I have finally been able to get access to SQL Server 2012, so I am just now getting to play with some of the features. My new company has multiple ways of calling an SSIS package, and some (if not all) use Package Parameters. I just did a little research on these, and I in general get how they work. Here is why I ask...
I liked how my last company had dynamic variables setup. They had all of the required variables stored on a single database table on a single server. This kept all of the connections strings, file paths, file names, etc. that a package would use. My computer, the UAT server, and the Prod server all had the same file in the same location with 1 character difference to note which environment to run in. This way I knew I would always use only the Dev server when I ran a package during development. I would also only touch the test folders with my test data. Once we moved it to UAT or Prod, that single character difference would point to a different set of variables for the same PackageID, and we didn't have to worry about forgetting to change hard coded variable values. The only 2 hard coded variable values were the PackageID and the variable holder database. I have heard of similar ways of doing this via an XML file, but I have not had the (ahem) pleasure of working with that yet.
Jump to my current job and why so far I have not been impressed with the Package Parameters. We have 3 different jobs that all call the same SSIS package. We feed in a different FacilityID, and using values stored in tables we know to look for different file names, etc. To me this seems to be a similar set up to how my last company had set the system. The big difference is my old company used a Script Task to verify which environment we were running in (I can see setting this for different FacilityID's, but that would be cumbersome), and my new company uses multiple tables across multiple databases (I know, this is not the best set up in the world, and we are fixing it soon) to decide what we will use for some of the variable values.
What are your thoughts on storing variables outside a package? Do you have any blog posts or articles you can link to show current best practices?do the Package Parameters only work via the Integrated Services Catalog, or can they be accessed for the File System packages too?
View 2 Replies
ADVERTISEMENT
Sep 17, 2015
I have a process which connects to a SQL server remotely, runs some code, creates a temporary table with an output. I want to be able to select the results of this table into XML (not a problem), put the results into a variable in SSIS, and put the variable results into a SQL table a different SQL Instance. Doing it this way removes the footprint of needing a normal table on the source SQL Server.
View 2 Replies
View Related
Dec 2, 2014
I have this procedure to remove certain characters from file names.
The SQL Task has this: exec dbo.spCleanseFileName @strFileName = ?, @strFileNameCleansed = ?
The stored procedure:
CREATE PROCEDURE [dbo].[spCleanseFileName](@strFileName varchar(40),@strFileNameCleansed varchar(40) output)
I have it in an SSIS package and my problem is that, after that SQL Task completes, the value for the
),@strFileNameCleansed variable is blank. I HAVE confirmed that the procedure DOES set the correct value inside the SP.
View 2 Replies
View Related
Jan 15, 2015
I have an SSIS package which uses variables and foreach loop containers so connect to multiple instances to retrieve config data. I am adding an extra step to include the port of each instance.
I used a select from a central table to get the connection strings, which is put into [User::Server2]
1) execute SQL task to collect the port
(DECLARE @portNumber NVARCHAR(10)
EXEC xp_instance_regread
@rootkey = 'HKEY_LOCAL_MACHINE',
@key =
'SoftwareMicrosoftMicrosoft SQL ServerMSSQLServerSuperSocketNetLibTcpIpAll',
@value_name = 'TcpPort',
@value = @portNumber OUTPUT
)
Which is then put into a variable @Portnumber
2) I then need to insert this into a certain server with a where clause including another variable
so something like
"INSERT INTO DBO.InstanceConfig VALUES ('"+@[User::Portnumber]+"') where Serverinstance = ('"+@[User::Server2]+"')
but it doesnt work like that.. is there an easier way
View 1 Replies
View Related
Nov 18, 2014
I am using Variables to configure a lot in an SSIS Packages.
Over the years you add new variables that are usefull to your default-package.
However to use those in "older" packages you have to open add them manually.
Any way (e.g. skript) to add a set of variables to every SSIS-package in a folder ?
View 3 Replies
View Related
Sep 9, 2015
Is it possible to export the environment variables for an SSIS 2012 project? And if so how is it achieved?
View 2 Replies
View Related
May 21, 2015
in SSIS
( Left(@[User::YourFileName],3) == "AP_" ? 101 : ( Left(@[User::YourFileName],3) == "VD_" ? 102 : ( Left(@[User::YourFileName],3) == "BK_ " ? 103 : 000)))
In the above Variable i want to change the value in Hundreds place i.e from 101,102,103 to 201 ,202, 203 depending upon some Project param
lets say if project param is 1, the values assigned should be as 101,102,103
if project param is 2, the values assigned should be as 201,202,203
if project param is 3, the values assigned should be as 301,302,303 etc...
View 0 Replies
View Related
Oct 20, 2014
I've got a number of stored procedures that I have for reporting
All are of a similar starting format
For easier maintenance and to take away the need to change all of them if the methodology changes I want to split out shared code.
What I want to do is to take out the part that populates the @ID1 table into a separate stored proc which will be called from the report procs. The values from the shared proc will then be parsed back to the reporting proc.
I thought about using a function but I don't think it will be flexible enough as in certain cases I want to parse 2 or more IDs back into the final output.
I also don't want to make the code too complex so that it is relatively easy to read
CREATE PROC dbo.ReportM1 @ID INT AS
DECLARE
@ID1 TABLE (ID INT PRIMARY KEY, UNIQUE(ID))
IF @ID = 0
INSERT INTO @ID1
[Code] ....
The first question I have is: can i do it with a table variable when going between procs or do i need to build a real table if i want it to maintain the logic in 1 place.
May be worth bearing in mind that the end user who will be executing the proc will only have read + execute stored proc access permissions so dropping, updating or creating real tables is not an option. #Temp tables are possible but since am using table variables throughout would prefer to stick with them.
View 2 Replies
View Related
Feb 10, 2014
I have SSIS 2012 Enterprise, using catalog deployment and have more that 50 environment variables for connection to databases across my enterprise.
The problem when i go to configure the packages after deployment and pick the proper env variables, that are not sorted, so i have to browse all entries in order to find the proper entry in environment variables.
View 1 Replies
View Related
Mar 4, 2014
I've got a package in SSIS 2012 that has an Execute SQL task in the control flow level.
The SQL in question does an Upsert via the SQL merge statement. What I want to do, is return the count of records inserted and records updated (No deletes going on here to worry about). I'm using the output option to output the changed recs to a table variable.
I've tried returning the values as:
Select Count(*) as UpdateCount from @mergeOutput where Action = 'Update'
and
Select Count(*) as InsertCount from @mergeOutput where Action = 'Insert'
I've tried setting the resultset to both Single rowset and Full rowset, but i'm not seeing anything returned to the package variables I've set for them (intInsertcount and intUpdatecount).
View 2 Replies
View Related
Jul 16, 2015
Can I assign values to variables in 2012 using below command? I have used the same command in 2008 and it works fine.
DTEXEC
/SERVER"XXXXXXXXSQLSERVER2012"/SQL"Mypackage.dtsx"/SETPackage.Variables[FilePath].Value;"C:Test estvariable.csv"
Wondering is there a different way in 2012 to pass values to variables dynamically.
View 2 Replies
View Related
Aug 8, 2013
How to pass variable from Parent to child and child to Parent Packages  is this possible in SQL SSIS 2012. I need this only in SSIS 2012 ...
View 6 Replies
View Related
Jul 31, 2007
I have been looking at the project Real reference implementation for doing auditing of data uploads. The tables and store procedures are in place using identical field and variable names. However, when running the package it does not update the relevant log entry with the end time and status.
I have performed the process manually running the stored procedures, providing the values directly and everything works fine.
I can only assume that the LogID variable is not being updated during the run and therefore the onEnd procedure cannot update the relevant log entry.
One side effect is that it does update the record when it€™s the first record entered into the table but not on any other inserts. Clearing the table each time is not an option.
This has become rather frustrating and would appreciate any assistance.
Thanks.
View 1 Replies
View Related
Feb 27, 2008
I'm new to SSIS, but have been programming in SQL and ASP.Net for several years. In Visual Studio 2005 Team Edition I've created an SSIS that imports data from a flat file into the database. The original process worked, but did not check the creation date of the import file. I've been asked to add logic that will check that date and verify that it's more recent than a value stored in the database before the import process executes.
Here are the task steps.
[Execute SQL Task] - Run a stored procedure that checks to see if the import is running. If so, stop execution. Otherwise, proceed to the next step.
[Execute SQL Task] - Log an entry to a table indicating that the import has started.
[Script Task] - Get the create date for the current flat file via the reference provided in the file connection manager. Assign that date to a global value (FileCreateDate) and pass it to the next step. This works.
[Execute SQL Task] - Compare this file date with the last file create date in the database. This is where the process breaks. This step depends on 2 variables defined at a global level. The first is FileCreateDate, which gets set in step 3. The second is a global variable named IsNewFile. That variable needs to be set in this step based on what the stored procedure this step calls finds out on the database. Precedence constraints direct behavior to the next proper node according to the TRUE/FALSE setting of IsNewFile.
If IsNewFile is FALSE, direct the process to a step that enters a log entry to a table and conclude execution of the SSIS.
If IsNewFile is TRUE, proceed with the import. There are 5 other subsequent steps that follow this decision, but since those work they are not relevant to this post.
Here is the stored procedure that Step 4 is calling. You can see that I experimented with using and not using the OUTPUT option. I really don't care if it returns the value as an OUTPUT or as a field in a recordset. All I care about is getting that value back from the stored procedure so this node in the decision tree can point the flow in the correct direction.
CREATE PROCEDURE [dbo].[p_CheckImportFileCreateDate]
/*
The SSIS package passes the FileCreateDate parameter to this procedure, which then compares that parameter with the date saved in tbl_ImportFileCreateDate.
If the date is newer (or if there is no date), it updates the field in that table and returns a TRUE IsNewFile bit value in a recordset.
Otherwise it returns a FALSE value in the IsNewFile column.
Example:
exec p_CheckImportFileCreateDate 'GL Account Import', '2/27/2008 9:24 AM', 0
*/
@ProcessName varchar(50)
, @FileCreateDate datetime
, @IsNewFile bit OUTPUT
AS
SET NOCOUNT ON
--DECLARE @IsNewFile bit
DECLARE @CreateDateInTable datetime
SELECT @CreateDateInTable = FileCreateDate FROM tbl_ImportFileCreateDate WHERE ProcessName = @ProcessName
IF EXISTS (SELECT ProcessName FROM tbl_ImportFileCreateDate WHERE ProcessName = @ProcessName)
BEGIN
-- The process exists in tbl_ImportFileCreateDate. Compare the create dates.
IF (@FileCreateDate > @CreateDateInTable)
BEGIN
-- This is a newer file date. Update the table and set @IsNewFile to TRUE.
UPDATE tbl_ImportFileCreateDate
SET FileCreateDate = @FileCreateDate
WHERE ProcessName = @ProcessName
SET @IsNewFile = 1
END
ELSE
BEGIN
-- The file date is the same or older.
SET @IsNewFile = 0
END
END
ELSE
BEGIN
-- This is a new process for tbl_ImportFileCreateDate. Add a record to that table and set @IsNewFile to TRUE.
INSERT INTO tbl_ImportFileCreateDate (ProcessName, FileCreateDate)
VALUES (@ProcessName, @FileCreateDate)
SET @IsNewFile = 1
END
SELECT @IsNewFile
The relevant Global Variables in the package are defined as follows:
Name : Scope : Date Type : Value
FileCreateDate : (Package Name) : DateType : 1/1/2000
IsNewFile : (Package Name) : Boolean : False
Setting the properties in the "Execute SQL Task Editor" has been the difficult part of this. Here are the settings.
General
Name = Compare Last File Create Date
Description = Compares the create date of the current file with a value in tbl_ImportFileCreateDate.
TimeOut = 0
CodePage = 1252
ResultSet = None
ConnectionType = OLE DB
Connection = MyServerDataBase
SQLSourceType = Direct input
IsQueryStoredProcedure = False
BypassPrepare = True
I tried several SQL statements, suspecting it's a syntax issue. All of these failed, but with different error messages. These are the 2 most recent attempts based on posts I was able to locate.
SQLStatement = exec ? = dbo.p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
SQLStatement = exec p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
Parameter Mapping
Variable Name = User::FileCreateDate, Direction = Input, DataType = DATE, Parameter Name = 0, Parameter Size = -1
Variable Name = User::IsNewFile, Direction = Output, DataType = BYTE, Parameter Name = 1, Parameter Size = -1
Result Set is empty.
Expressions is empty.
When I run this in debug mode with this SQL statement ...
exec ? = dbo.p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
... the following error message appears.
SSIS package "MyPackage.dtsx" starting.
Information: 0x4004300A at Import data from flat file to tbl_GLImport, DTS.Pipeline: Validation phase is beginning.
Error: 0xC002F210 at Compare Last File Create Date, Execute SQL Task: Executing the query "exec ? = dbo.p_CheckImportFileCreateDate 'GL Account Import', ?, ? output" failed with the following error: "No value given for one or more required parameters.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Compare Last File Create Date
Warning: 0x80019002 at GLImport: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "MyPackage.dtsx" finished: Failure.
When the above is run tbl_ImportFileCreateDate does not get updated, so it's failing at some point when calling the procedure.
When I run this in debug mode with this SQL statement ...
exec p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
... the tbl_ImportFileCreateDate table gets updated. So I know that data piece is working, but then it fails with the following message.
SSIS package "MyPackage.dtsx" starting.
Information: 0x4004300A at Import data from flat file to tbl_GLImport, DTS.Pipeline: Validation phase is beginning.
Error: 0xC001F009 at GLImport: The type of the value being assigned to variable "User::IsNewFile" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
Error: 0xC002F210 at Compare Last File Create Date, Execute SQL Task: Executing the query "exec p_CheckImportFileCreateDate 'GL Account Import', ?, ? output" failed with the following error: "The type of the value being assigned to variable "User::IsNewFile" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Compare Last File Create Date
Warning: 0x80019002 at GLImport: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "MyPackage.dtsx" finished: Failure.
The IsNewFile global variable is scoped at the package level and has a Boolean data type, and the Output parameter in the stored procedure is defined as a Bit. So what gives?
The "Possible Failure Reasons" message is so generic that it's been useless to me. And I've been unable to find any examples online that explain how to do what I'm attempting. This would seem to be a very common task. My suspicion is that one or more of the settings in that Execute SQL Task node is bad. Or that there is some cryptic, undocumented reason that this is failing.
Thanks for your help.
View 5 Replies
View Related
Jun 5, 2014
I have a really big stored proc that needs to be rolled out to various databases as part of db installs I run through SSIS.
The Stored proc is too long to run using Execute SQL Task. Is there another way that just running the create script manually.
View 9 Replies
View Related
Jun 25, 2014
We require to convert a list of SPs in to SSIS packages. Most of the SPs do the below steps:
mainly our store procedure r to have compare the present date to past date , and comparing emp id between the files and also some joins. updating table r take place.
View 6 Replies
View Related
Jun 11, 2014
I have a ssis package stored in file system and I need to modify this package.
View 7 Replies
View Related
Aug 15, 2014
To set the scene I am using SQL 2012, in project deployment mode (SSIS Catalog rather than file system).I have setup an SSIS package to run a stored procedure which exports data for the last hour to a .tsv file and then FTP's the file to some other location via a sql agent job - This all works fine.However, I can see there may be a requirement to run the package with dates that need to be set i.e. in the event of a lost file of some other reason the package has not run and missed some of its hourly slots and the customer requires the files to be resent.
The stored procedure I am using has parameters for "DateOverride" - boolean), "start" and "end" dates (datetime) with defaults set "0" for "DateOverride" and null for the "Start" and "End" dates, I have built logic into the procedure which sets the dates if the parameters are null (as in the above to an hour before now). What I would like to be able to do (and this is to make it user friendly for support staff) is to be able to set parameters/variables in SQL agent with "DateOverride" set to "1" and the the dates I would like to be sent to the stored procedure "Start" and "End" parameters.
I did try using the parameters in SSIS which worked well when the values were true or false (0,1) but didn't work at all for the dates. If I left the dates as I had set them is SSIS it worked, but if I changed them (even if it was just changing the hour) the job errored/crashed and corrupted the job step leaving me the ability to only delete it.
View 4 Replies
View Related
Jun 9, 2015
Using the following:
SQL Server: SQL Server 2012
Visual Studio 2012
I have created an SSIS package where I have added an Execute SQL Task to run an existing stored procedure in my SQL database.
General:
Result Set: None
Connection Type: OLE DB
SourceType: Direct Input
IsQueryStoredProcedure: False (this is greyed out and cannot be changed)
Bypass Prepare: True
When I use the following execute statement where I am "Hard Coding" in the parameters, the stored procedure runs successfully and it places the data into the table per the stored procedure.
SQLStatement: dbo.sp_ml_location_load @system_cd='03', @location_type_cd=Store;
However, the @system_cd parameter can change, so I wanted to set these parameters up as variables and use the parameter mapping in the Execute SQL Task.
I have set this up as follows and it runs the package successfully but it does not put the data into the table. The only thing I can figure is either I have the variables set up incorrectly or the parameter mapping set up incorrectly.
Stored procedure variables:
ALTER PROCEDURE [dbo].[sp_ml_location_load]
(@system_cd nvarchar(10), @location_type_cd nvarchar(10))
AS
BEGIN .....................
Here is my set up, what is wrong here:
I Created these Variables:
Name Scope Data Type Value
system_cd Locations String '03'
location_type_cd Locations String Store
I added these parameter mappings in the Execute SQL Task
Variable Name Direction Data TypeParameter NameParameter Size
User::system_cd Input NVARCHAR@system_cd -1
User::location_type_cd Input NVARCHAR@location_type_cd -1
I used this SQLStatement: EXEC dbo.sp_ml_location_load ?,
It runs the package successfully but it does not put the data into the table.
View 2 Replies
View Related
Apr 7, 2015
A project I'm working on consists of a Main stored procedure which then runs about 30 nested procedures. The client wants to know when a certain nested SP fails, but wihtout rollbacks, as they may want to fix a data item manually (such as a missing Patient ID, that they have to call someone about). At this point, we don't want to roll back anything but halt the rest of the nested SP's and send out an email to someone that they have to check out a missing PatientID.
I'm wondering if an SSIS package would handle this better than just using a Stored Procedure. When that SP runs, it will also update a "Process tracking" table in the backend, that would update [Lastprocessran] with a number. I'm thinking that if they run the main SP again, after making a manual correction, that they could re-run the main SP, and it would bypass any step that already ran successfully based upon the [Lastprocessrun] number.
View 2 Replies
View Related
Jun 23, 2015
Using the following:
SQL Server: SQL Server 2012
Visual Studio 2012
I have created an SSIS package where I have added an Execute SQL Task to run an existing stored procedure in my SQL database.
General Tab:
Result Set: None
Connection Type: OLE DB
SourceType: Direct Input
IsQueryStoredProcedure: False (this is greyed out and cannot be changed)
Bypass Prepare: True
SQL Statement: EXEC FL_CUSTOM_sp_ml_location_load ?, ?;
Parameter Mapping:
Variable Name Direction Data Type Prmtr Name Prmtr Size
User: system_cd Input NVARCHAR 0 10
User: location_type_cd Input NVARCHAR 1 10
Variables:
location_type_cd - Data type - string; Value - Store (this is static)
system_cd - Data type - string - ??????
The system code changes based on the system field for each record in the load table
Sample Data:
SysStr # Str_Nm
3 7421Store1
3 7454Store2
1815061Store3
1815063Store4
1615064Store5
1615065Store6
1615066Store7
7725155Store8
STORED PROCEDURE: The stored procedure takes data from a load table and inserts it into another table:
Stored procedure variables:
ALTER PROCEDURE [dbo].[sp_ml_location_load]
(@system_cd nvarchar(10), @location_type_cd nvarchar(10))
AS
BEGIN .....................
This is an example of what I want to accomplish: I need to be able to group all system 3 records, then pass 3 as the parameter for system_cd, run the stored procedure for those records, then group all system 18 records, then pass 18 as the parameter for system_cd, run the stored procedure for those records and keep doing this for each different system in the table until all records are processed.
I am not sure how or if it can be done to pass the system parameter to the stored procedure based on the system # in the sys field of the data.
View 6 Replies
View Related
Feb 12, 2014
I have a server which has SQL Server 2012 SSAS.
My client wants SSIS and database engine to be installed to be mapped to this analysis services engine.
Is that possible?
View 3 Replies
View Related
Jul 9, 2015
we can  assign one parameter value for each excecution of  [SSISDB].[catalog].[set_object_parameter_value] by calling this catalog procedure..
Example: If I have 5 parameters in SSIS package ,to assign a value to those 5 parameters at run time should I call this [SSISDB].[catalog].[set_object_parameter_value] procedure 5 times ? or is there a way we can pass all the 5 parameters at 1 time .
1. Wondering if there is a way to pass multiple parameters in a single execution (for instance to pass XML string values ??)
2.What are the options to pass multiple parameter values to ssis package through stored procedure.?
View 4 Replies
View Related
Aug 6, 2015
I am trying to dynamically create the connection to a database within an SSIS package.
the requirement is to allow the user to pass through the database as a variable and that variable will dynamically create the connection string in the connection manager.
Is this possible, if so how?
View 0 Replies
View Related
Jul 26, 2014
I need to create a procedure with Restore Database command in many applications in differente platforms. But I can't "use master". How do I do it?
View 1 Replies
View Related
Nov 5, 2014
I have a database which uses "Database Mirroring", and I need to write stored procedure and pull data from "Principal Server".
My Current Logic:
CREATE PROCEDURE abc123
as
BEGIN
IF Server01 = 'ONLINE'
BEGIN
[Code] .....
The problem I am facing is: Stored procedure is not created because "One of the server is not Online"...
View 4 Replies
View Related
Jul 23, 2015
All of a sudden my user variables are not displayed.
I know that they exist because the package run is successful.
For better, quicker answers on T-SQL questions, click on the following...
[URL]
For better answers on performance questions, click on the following...
[URL]
View 4 Replies
View Related
Mar 19, 2015
I'm rewriting a huge FOR XML EXPLICIT procedure to use FOR XML PATH, and need to compare previous output to the refactored one, so i didn't mess up XML structure.
The thing is, i'm not sure that SQL Server will always generate exactly same xml **string**, so i'd rather not compare by:
WHERE CAST(@xml_old AS NVARCHAR(MAX)) = CAST(@xml_new AS NVARCHAR(MAX))
nor do i want to manually validate every node, since the generated xml-structure is quite complex.
compare xmls by their "semantic value" ?
View 8 Replies
View Related
Sep 17, 2015
I have three variables
DECLARE @QuantityID uniqueidentifier,
@LengthID uniqueidentifier,
@CostID uniqueidentifier
They are sent to the sproc as null. Since they could be null I need to exclude them from posting to a temp table
Example
DECLARE @QuantityID uniqueidentifier,
@LengthID uniqueidentifier,
@CostID uniqueidentifier
SET @CostID = NEWID()
SELECT @QuantityID as ID UNION ALL
SELECT @LengthID UNION ALL
SELECT @CostID
Two values are null. I want those excluded from this table
Here is the example of what I am trying to do:
DECLARE @QuantityID uniqueidentifier,
@LengthID uniqueidentifier,
@CostID uniqueidentifier
DECLARE @Temp as Table (id uniqueidentifier NOT NULL Primary key)
SET @CostID = NEWID()
INSERT INTO @Temp
SELECT @QuantityID as ID UNION ALL
SELECT @LengthID UNION ALL
SELECT @CostID
How do I insert into @Temp only non null values?
View 5 Replies
View Related
Sep 17, 2015
I am trying to use variables to generate the command:
USE DATABASE
GO
Code below:
DECLARE @DBName_Schema varchar(500)
SET @DBName = 'Test'
EXEC ('USE ' + @DBName )
GO
It does not seem to be working.
View 5 Replies
View Related
May 16, 2006
Hi there,
This is what I am trying to do :
1) Create a global variable.
2) assign a value to the variable using an SQL Task. (For this all I want to do is assign a maximum value from a column in my table)
3) use the variable in a Data flow task (using SQL to get my source data)
I know this must be very simple but I am new to SSIS and I am struggling to achieve this task.
Thanks for your help in advance.
View 11 Replies
View Related
Aug 2, 2007
Hi,
I'm trying to use a variable in a OLEDB Command, but i can't do it.
What i want to do is:
Step 1: Count the number of rows of a table (using count rows transofrmation) and save it to a variable 'var1'.
Step2: Insert some rows on this table.
Step 3: Count again the number of rows and save it on another variable 'var2'.
Step 4: Ina OLEDB Command , get the inserted records in step 2 to manipulate them on other tables...
Something like that: select top (@var2 - @var1) * from table order by desc
¿Can i use local or global variables from an OLEDB Command transformation object?
View 3 Replies
View Related
Oct 24, 2014
I have a table in the report. One of the columns is the result of a variable. It is the maximum value of a field that is grouped.I need to chart the maximum values and use a different group for the values.
For example:
In the data set is the following information:
Furnace # Heat # Frame Avg Window Avg
then the table has the following:
Heat # Max Frame Avg Max Window Avg
I need to graph the Max Frame Avg and the Max Window Avg on separate graphs.
View 0 Replies
View Related
