I have just started to use Integration Services Catalog with SQL Server Agent. After I deploy a new version of the project the any Server Agent job that uses any of dstx still uses the old one. How do I fix this?
View 1 RepliesI'm trying to find out if there is a way within sql server or via script of emailing when a particular job or jobs has over run?
View 1 Replies View RelatedAs part of my backup routine, I have a SQL job for each DB which which is called "DB-NAME - Backup Job"
I need to put a script together to check that each database has a backup job associated to it.
select * From sys.sysdatabases where name not in ('msdb','model', 'master', 'Tempdb', 'DBA') order by name desc
select * from msdb.dbo.sysjobs order by name desc
I know all the details i need are in there, but i cant figure out the best way to tackle it. Do I need to do a cursor to go through each DB name, put it into a variable, then select the job name where name like '$variable%' ?
We have a scheduled restore job daily from production backup to non-production. The job usually runs in 2 hrs but today it ran more than 8 hrs.
How to get notification about this job like if it runs more than 3 hrs send email with % of restore completed
I need to setup an email alerts with Jobs errors ( with error logs is it possible ) on nightly basis.
example:
Job name : Full backup | Status : Error | error log : 'The job failed 12........'Â
Job name : Delta Backup| Status : Error | error log : 'The job failed 123........'
Job name : Cleanup DB  | Status : Error | error log : 'The job failed 1234........' Â
What's the easiest way to do that ?
SQL 2012 Standard on Windows Server 2012 Standard
After observing brute force attacks on our VPS myhosting instance against the SA login, I change the SA login name. Now my two new backup jobs are failing. The agent service logs in as NT ServiceSQLSERVERAGENT. Nothing changed there (so far as I know and I'm the only one who should be on the VPS). The job owner was SA and after changing the SA account that was reflected in the SSMS gui; job owner 'newsaname'. I'm sure I can just rebuild the maintenance plans but I'd like to know what happened.
Also, I would like to learn more about the brute force attacks and how to determine what port they are comming in on. I see an IP address associated with them. Does that mean they are coming in on 1433 or 1434?
SQL 2012 Standard VPS Windows 2012 Server Standard
what is the equiv to dtsrunui to create the operating system (CmdExec)....
anyone have a good site suggestions for ssis outside of bol
Hi
I have a strange scheduling problem.
I have a job, i test it through BIDS - Works
I test it through SSMS - works
I run the job - Works
I schedule for a run time job - Works
I schedule for a recurring job - Works
However (here is the really annoying part) it fails to run at the night run (11.20PM)
there are 6 other packages that run fine after it , 11.30 , 1AM .. 4 AM etc ...
So
last night I changed the package to run at a later time, and it worked, but the other package that
ran 2nd (which now ran 1st) failed !!
its almost as if the 1st package has to fail !!!!!
When i look at the history and detailed log all it says is "The step Failed"
anyway , I can set up a workaround by starting a dummy job that is supposed to fail..
FYI the jobs are run under administrator and they are protected by a password (encryptSensitiveWithpassword) .
I have a brief question.
With a DTS scheduled job if I needed to make a modification, I just changed the DTS and saved it, and the job would automatically
Run the latest DTS (so long as the name was the same)
When I migrate a package to SSMS and schedule it , if I need to modify the package, do I need to modify it through BIDS (visual studio), then re-import it to SSMS and then reschedule it ?
Or is there a quicker way of modifying it ?
Thanks
I am trying to transfer all jobs from one instance to another by using data tools. However, once i tried to make smo connection i am getting this error;
A network-related or instance-specific error occurred while establishing a connection to SQL Server.
In order to solve this issue i have tried these solutions;
1. SQL Server should be up and running. (OK)
2. Enable TCP/IP in SQL Server Configuration (OK)
3. Open Port in Windows Firewall (FW ACCEPTS ALL LOCAL PORTS)
4. Enable Remote Connection (CHECK OUT THE sp_configure SETTINGS, i even right-click instance then see from properties )
5. Enable SQL Server Browser Service (sql server browser has been restarted)
6. Create exception of sqlbrowser.exe in Firewall (FW ACCEPTS ALL PROGRAMS)
7. I tried windows and sql authentication which has sysadmin role
8. INSTANCE name is also chekced millions of times
Is there anyway we could retrieve the job history for all the jobs in all the sql server using Central Management Server?
View 0 Replies View Related
Hi there,
I've got an urgent thing I need to resolve.
I have a package that has a file connection. We have set the connection in the package for development - we also have the connection in a config file.
We are calling the package from SQL Jobs. In the step we call the package in, we try to set the value for the connection in the Data Source tab. However, the package does NOT use the value we enter.
I then removed the connection from the config file - then the package uses what the connection was set to in development. It still will not use what we enter in SQL Jobs.
Furthermore, when we run the package we lose the values that we put in the DataSource tab!!!!
My work around has been to change the SQL Job type from an INtegration services package to a straight command line - this works.
The question is - can you set a package's connection strings from SQL Jobs using the SSIS Job Type ???
Thanks!!!
On my laptop I've got SQL2005 developper edition SP1 with 3 SSIS-jobs scheduled through SQL-agent.
These 3 SSIS-jobs are in fact maintenance plans which are also used on our production SQLServers.
These take backups (full, transactional), Cleanup old backups, reorganize indexes, update stats ...
One of these jobs runs every hour to take transaction logbackups. After installing SP2 this started failing.
When I opened the sources of that job in visual studio It seemed like the unit of thime was changed for cleanup jobs fe cleanup bak-files after 4 days changed into after 4 hours. The backup task for transactional backups which had the property to do that for all databases whas changed into specific databases which no database selected.
Even when I changed that into All databases and saved it, when I opened that backup task again, this was changed back into specific databases with no database selected.
I uninstalled SQL2005 and reinstalled it, including SP1 and everything works well again.
Does anyone know how to solve this.
I am hoping someone can help me with a problem I am having with SSIS. I am attempting to move certain sql agent jobs from our older sql 2000 server to our new sql 2005 server and I am receiving the error [Transfer Jobs Task] Error: Execution failed with the following error: "The specified '@server' is invalid (valid values are returned by sp_helpserver).".
Does my server name need to be the same if I am using SSIS to transfer jobs? Is there a way to update the server name during the execution process?
This seems like it should be a relatively easy task but has not been so far.
Any help is appreciated.
In one of my environments, I need to grant the ability to view all the logins and agent jobs to an account, but I don't want to give him "sysadmin" or "securityadmin".
View 2 Replies View Related
I'm having an issue in SQL Server 2005 with jobs that execute SSIS packages. The jobs run fine for a week or so, then I'll come to find that four or five (of the ten or so jobs) are hung in "executing" status. They seem to hang indefinitely (as some have been "executing" for hours with no end. The schedules of the hung jobs are all different, varying from every 10 minutes to nightly. The packages perform completely diffent tasks, as well. I can't seem to find any common thread with the jobs that get hung, other than they are all executing SSIS packages.
I've tried manually stopping the jobs and restarting the agent and SQL Server but the jobs hang again on there next scheduled run. The only thing that fixes the issue is rebooting the box, and then the jobs hang again in a week or so. Could some sort of memory leak be consuming resources throughout the week and be causing the jobs to eventually hang? I just rebooted the box and the sqlagent90.exe process is currently using about 7mb of memory. I'll keep an eye on it. Any other suggestions?
I've thought of creating another job that stops jobs that are hung, but what's to say that this job won't get hung as well? Plus this seems like a band-aid fix...
I don't recall having these problems until installing SQL Server 2005 SP2. Could this be related? I've searched like crazy and still can't find a resolution to this. It's becoming a big PITA...
Anyway, any suggestions would be very much appreciated!
I would like to create an SSIS package in 2005 and run it in 2000. Is there anyway to do this? Or does SQL Server 2000 have a precursor to SSIS? I am trying to create a job to automatically catch and kill orphaned processes.
-Kyle
I have created simple package loading data from source to destination.in BIDS working fine, but when i created job through sql server agent job I am getting below error.
Error:- The Job was invoked by User . The last step to run was step SQL AGENT JOB.
Hello All,
My database application has certain stored procedures which are scheduled to run at certain predefined interval (say once everyday). Now to implement this logic I have two options with me, first being to use the EXECUTE SQL TASK of the SSIS package and schedule it using the windows scheduler and the other is to use the SQL Server Agent Jobs and schedule it there itself. Now the current implementation is using the SSIS packages and I even know that the second approach of using the SQL Server Agents Job is better.
The only thing I want to know is whether it makes sense to invest time in converting my SSIS packages (20 in all) to SQL Server Agent jobs or not. Can somebody briefly explain or give some pointers regarding the performance benefits of Agent Jobs over the SSIS packages.
Thanks in Advance
Mitesh
I am trying to send out notifications when jobs complete (fail or succeed). I have database mail working fine on my DEV server, but I am having issues with it on my PROD server. I am currently having people look into if McAfee may be blocking it.
I am able to send out a test email from SSMS>Management>Database Mail, but when I set a Notification for a job, the job will complete and in the history, it will say "NOTE: Failed to notify 'User' via email."
I have created an Operator and set up Profiles and Accounts, just as I did on my DEV server.
Just an FYI for those scheduling SSIS packages on 64bit Itaniums.
This came to light when using a 32 bit OLEDB driver on a 64bit Itanium.
When manually executing the package on the server through SQL Management
Studio, we got the expected results. However, when we scheduled the
package as a job, it failed every time. The error was:
"The AcquireConnection method call to the connection manager 'ConnectionName' failed with error code 0xC0202009€?.
We tried everything to fix this, but nothing worked. Finally we found
that when manually running the package, SQL Management Studio was calling the
32bit version of dtexec.exe, while the Agent calls the 64bit version of
dtexec.exe. The fix is to not use the "SQL Server Integration
Services Package" type in the job step, but use "Operating system
(CmdExec)" type. Then in the command box, call the 32bit (x86)
version of dtexec.exe.
Example:
C:Program Files (x86)Microsoft SQL Server90DTSBinnDTExec.exe /DTS
"File SystemSSIS Packages[PackageName]" /SERVER [SQLSERVERNAME]
/DECRYPT [password] /MAXCONCURRENT " -1 " /CHECKPOINTING OFF
/REPORTING V
Environment: SQL Server 2005 Enterprise Edition x64, 3 server cluster. Two active servers with seperate instances and one passive server. SQL Server was installed on the two active servers.
Problem: When I fail over either of my instances to the passive server in the cluster my maintenance jobs fail to run and there are error messages in the application event viewer "SSIS Subsystem failed to load". I am guessing that all of the needed components are not installed on the passive server? Is this a close guess? If so, exactly what components are missing and do you have to have another license to install them?
Thanks in advance for any advice.
Hi everyone -
I am building from the Time Tracker Start Kit, trying to get a better feel for how MS thinks we should do things.
In my editing, I have built a new Stored Procedure, trying to pull the newest entries for a specified person.
I have the following that will return all entries for a specific person, sorted by date, newest first:
SELECT
EntryLogID, TT_EntryLog.Description, Duration, EntryDate, TT_EntryLog.ProjectID AS ProjectID,
TT_EntryLog.CategoryID AS CategoryID, TT_Categories.Abbreviation AS CategoryName, TT_Projects.Name AS ProjectName,
ManagerUserID, TT_Categories.Abbreviation AS CatShortName
FROM
TT_EntryLog
INNER JOIN
TT_Categories
ON
TT_EntryLog.CategoryID = TT_Categories.CategoryID
INNER JOIN
TT_Projects
ON
TT_EntryLog.ProjectID = TT_Projects.ProjectID
WHERE
UserID = @UserID
ORDER BY
EntryDate Desc
This will return something like:
EntryLogId Description Duration EntryDate ProjectID CategoryID CategoryName ProjectName ManagerUserID CatShortName
14Can type date in date... .00 2004-02-04 10:28:00116Pros ITS Project Management App 3 Pros
12Changed "Entry Date"... .00 2004-02-03 13:28:00116Pros ITS Project Management App 3 Pros
13Added default button ... .00 2004-02-03 00:00:00116Pros ITS Project Management App 3 Pros
11Removed hours per p... .00 2004-02-03 00:00:00116Pros ITS Project Management App 3 Pros
6Isn't this cool .00 2004-02-02 00:00:00229Pros Knowledge Base 3 Pros
9Added week-by-week... .00 2004-02-02 00:00:00116Pros ITS Project Management App 3 Pros
10Fixed Update comma... .00 2004-02-02 00:00:00116Pros ITS Project Management App 3 Pros
1Built initial framewor... 6.00 2004-01-30 00:00:00116Pros ITS Project Management App 3 Pros
5Adding up to 8 hours... 2.00 2004-01-30 00:00:00229Pros Knowledge Base 3 Pros
3Debugged - fixed a f... 1.00 2004-01-23 00:00:00229Pros Knowledge Base 3 Pros
What I would like to accomplish is to return only the newest entry for each ProjectID (so in the above example, there would only be 2 entries, EntryID 14 and 6)
Any ideas?
Thanks in advance-
How can I select from a table the newest entry.I'm inserting in a table user info and then want to get the users id number
View 9 Replies View RelatedI have a query set up that returns the data that I would like, but Iwould only like the latest data for each vehicle number. The query Ihave set up isSELECT TOP 100 PERCENT dbo.vwEvents.EventName,dbo.luSessionAll.SessionName, dbo.luOuting.OutingNumber,dbo.luVehicle.VehicleName, dbo.luOuting.OutingID,dbo.tblOutings.OutingStartTime,dbo.tblSessions.Ses sionDate,dbo.tblSessions.SessionStartTimeFROM dbo.vwSessions INNER JOIN dbo.vwEvents ONdbo.vwSessions.Event = dbo.vwEvents.EventIDINNER JOINdbo.luSessionAll ON dbo.vwEvents.EventID =dbo.luSessionAll.Event INNER JOINdbo.luOuting ON dbo.luSessionAll.SessionID =dbo.luOuting.SessionID INNER JOINdbo.luVehicle ON dbo.luSessionAll.Vehicle =dbo.luVehicle.VehicleID INNER JOINdbo.tblOutings ON dbo.luOuting.OutingID =dbo.tblOutings.OutingID INNER JOINdbo.tblSessions ON dbo.tblOutings.[Session] =dbo.tblSessions.SessionIDGROUP BY dbo.vwEvents.EventName, dbo.luSessionAll.SessionName,dbo.luOuting.OutingNumber, dbo.luVehicle.VehicleName,dbo.luOuting.OutingID, dbo.tblOutings.OutingStartTime,dbo.tblSessions.SessionStartTime, dbo.tblSessions.SessionDateORDER BY dbo.luVehicle.VehicleName, dbo.tblSessions.SessionDate,dbo.tblSessions.SessionStartTime, dbo.tblOutings.OutingStartTimethis returns all the outings. I would like the outing that has, inorder of importance, the latest session date, latest session time andlatest outing start time. Outing start time can sometimes be <<Null>>but the other two always have values. How would I go about doing this?thanks in advance for any help
View 2 Replies View RelatedHi,Can anyone help please?select notefield, modifiedonFROM Table1WHERE id = '100426' and(statusfield like '%criteria1%' ORstatusfield like '%criteria2%')Produces a list of records based upon the criteria. I would like to beable to only show the newest dated record, from the modifiedon field.I've tried max(modified) on, but as I am using an aggregate function inthe query I have to use GROUP BY, which notefield does not like as thisis a ntext field.(I get:Server: Msg 306, Level 16, State 2, Line 1The text, ntext, and image data types cannot be compared or sorted,except when using IS NULL or LIKE operator.)Any ideas please?
View 1 Replies View RelatedHey all,
I just discovered this cool forum. I am fairly new to T-SQL, so please bear with me.
Here is my problem. I am trying to return 1 record for each distinct MachineName, based on the most current CreateTime.
I have tried a bunch of different things, but the follwing query seems to get me close, except for all of the records, per MachineName, that aren't the newest CreateTime. Can anyone offer a suggestion I may be missing?
Here is my query:
SELECT
rcv.Name AS MachineName, r.CreateTime, rpv.Path + rpv.Name AS ResourcePool
FROM
dbo.Result_View AS r WITH (NOLOCK) INNER JOIN
dbo.ResourceConfiguration_View AS rcv WITH (NOLOCK) ON r.ResourceConfigurationId = rcv.Id INNER JOIN
dbo.Resource_View AS rv WITH (NOLOCK) ON rcv.ResourceId = rv.Id INNER JOIN
dbo.ResourcePool_View AS rpv WITH (NOLOCK) ON rv.ResourcePoolId = rpv.Id
WHERE
(rpv.Name NOT LIKE 'Archive')
AND
(r.CreateTime > '2/1/2008')
AND
(r.CreateTime = (SELECT TOP (1) r.CreateTime FROM dbo.Result_View))
ORDER BY MachineName
I have added the '2/1/2008' filter, so as not to hammer the DB too hard. It goes back for some time.
Thanks in advance,
Allen
I'm trying to execute my package using schedule in SQL Server Agent, I've already tested my package by run it manually in Integration services and it works. The table created, the data from my flat file also inserted into the table correctly and the result return with success.
The question is why when I execute my package using SQL Server Agent, the SQL Server Agent keep executing my package like infinite loop until I stop the job. after I stop the job there is no error generated by sql server. Could you figured why this happen?? I've already tried to upgrade into SP2 and set the package protection level and still not get good result from it. thank you.
Hi!I want to do a query against a SQL DB and by sorting a datetime field, I want to get the second newest record in the table, not the newest.Can I do that?/Johan Ch
View 1 Replies View RelatedI dont know how to get the newest input for each user from one single table.
Should be a very simple task but i cant work it out.
The table looks like this:
ID (A_I), userID, ip, date(timestamp)
Here is a SQL Fiddle Link with some data also: [URL] ....
I have tried a lot querys like this one:
SELECT userID, ip FROM userips GROUP BY userID ORDER BY ID DESC
But this one does not give me the latest ip which was entered by a user.
Hello everybody,-------------------------------------------------CREATE TABLE [T1] ([IDX] [numeric](18, 0) IDENTITY (1, 1) NOT NULL ,[DateEvt] [datetime] NOT NULL,[Value] [varchar] (10) NOT NULL ,[DataX] [varchar] (10) NULL ,CONSTRAINT [PK_T1] PRIMARY KEY CLUSTERED([IDX]) WITH FILLFACTOR = 90 ON [PRIMARY]) ON [PRIMARY]GOinsert into T1 (DateEvt,Value, DataX) values('2004.10.10 10:00:00','0000000001', 'AAAAAAAAAA')insert into T1 (DateEvt,Value, DataX) values('2004.10.10 10:00:01','0000000002', 'AAAAAAAAAA')insert into T1 (DateEvt,Value, DataX) values('2004.10.10 10:00:02','0000000003', 'AAAAAAAAAA')insert into T1 (DateEvt,Value, DataX) values('2004.10.10 10:01:00','0000000001', 'BBBBBBBBBB')insert into T1 (DateEvt,Value, DataX) values('2004.10.10 10:02:00','0000000001', 'CCCCCCCCCC')insert into T1 (DateEvt,Value, DataX) values('2004.10.10 10:03:00','0000000001', 'DDDDDDDDDD')GO-------------------------------------------------and the question is:In which fastes and best for the preformance way, get the last IDX ofspecified Value.I could do this like this:-------------------------------------------------declare @nIDX numericdeclare @sValue varchar(10)select top 1 @nIDX = IDX from T1where Value = @sValueorder by DateEVT desc-------------------------------------------------But I know, this is not fast (even if I have index on DateEVT field),and I'm quite sure, that there is better way to get this IDX.Anyway, this table can be big (like 20 milions records).I could take the max of IDX, but is it a sure way?Any help? Thanks in advanceMatik
View 1 Replies View Relatedi have the following table
Project
Name
Date
1
Dennis
01-01-2004
1
Peter
03-03-2005
2
Henry
01-02-2003
2
Lisa
04-03-2003
2
Peter
05-05-2005
2
Simon
05-06-2005
2
Lisa
12-12-2005
3
Henry
02-02-2004
4
Peter
03-04-2003
5
Joan
12-10-2005
For each project i would like to have the latest responsible person, so that i get a list like this
Project
Name
Date
1
Peter
03-03-2005
2
Lisa
12-12-2005
3
Henry
02-02-2004
4
Peter
03-04-2003
5
Joan
12-10-2005
Can someone please tell me how to do that in one query ?
I have the following Table:DataIDuserIDTimeStampI need to create a query that selects the "newest" records for all distinct users. I'm hoping to get this done in one query. I know I could write multiple queries to find all distinct users, and then the newest records based on that... and so on... but I'm not sure that's the most efficient. I have the following so far, but is it the most efficient (I have indexing on most of my columns)? SELECT DATA.DataID, DATA.UserID, UN.vchName, UN.vchImage, U.vchFirstName + ' ' + U.vchLastName AS 'FullName' FROM [tblData] DATA INNER JOIN [tblUnits] UN ON DATA.UserID = Un.UserID INNER JOIN [tblusers] U ON U.UserID = UN.UserID WHERE GPS.intGPSDataID IN (SELECT MAX([tbLData].DataID) FROM [tbLData] GROUP BY [tbLData].UserID)
View 4 Replies View Related