SQL 2012 :: Select Multiple Values From Same Column And Make Them To Show In A Row
Jun 10, 2015
I created a query that got the following result. But I expect to get the structure like, care_nbr, cust_nbr,legal_name, address_type=physical address, addr_line_1, addr_line_2, address_type-primary address, ddr_line_1, addr_line_2. That means I only need primary and physical address, and expect them to show in a row to each care_nbr. How to perform that?
I created a query that got the following result. But I expect to get the structure like, care_nbr, cust_nbr,legal_name, address_type=physical address, addr_line_1, addr_line_2, address_type-primary address, ddr_line_1, addr_line_2. That means I only need primary and physical address, and expect them to show in a row to each care_nbr. How to perform that?
in my table i ve the column of item code which contains '1000' ,'2000' ,'3000' series i jus wanna display the output of item codes '1000','2000'series and some of ('3000019','3000020','3000077','3000078').
i tried in my join query
these code left(itemcode,4) in ('1000','2000') or itemcode in ('3000019','3000020','3000077','3000078')
I am writing a report in SQL server 2005 Reporting service. The report has two parts: first part shows basic information about the client; the second part lists all the softwares the client has. My question is how to make the softwares listed in two columns as shown below?
how we can replace the multiple values in a single select statement? I have to build the output based on values stored in a table. Please see below the sample input and expected output.
Hello all. I hope someone can offer me some help. I'm trying to construct a SQL statement that will be run on a Dataset that I have. The trick is that there are many conditions that can apply. I'll describe my situation:
I have about 1700 records in a datatable titled "AISC_Shapes_Table" with 49 columns. What I would like to do is allow the user of my VB application to 'create' a custom query (i.e. advanced search). For now, I'll just discuss two columns; The Section Label titled "AISC_MANUAL_LABEL" and the Weight column "W". The data appears in the following manner:
(AISC_Shapes_Table)
AISC_MANUAL_LABEL W W44x300 300 W42x200 200 (and so on) WT22x150 150 WT21x100 100
(and so on) MT12.5x12.4 12.4 MT12x10 10 (etc.)
I have a listbox which users can select MULTIPLE "Manual Labels" or shapes. They then select a property (W for weight, in this case) and a limitation (greater than a value, less than a value, or between two values). From all this, I create a custom Query string or filter to apply to my BindingSource.Filter method. However I have to use the % wildcard to deal with exceptions. If the user only wants W shapes, I use "...LIKE 'W%'" and "...NOT LIKE 'WT%" to be sure to select ONLY W shapes and no WT's. The problems arises, however, when the user wants multiple shapes in general. If I want to select all the "AISC_MANUAL_LABEL" values with W <= 40, I can't do it. An example of a statement I tried to use to select WT% Labels and MT% labels with weight (W)<=100 is:
Code SnippetSELECT AISC_MANUAL_LABEL, W FROM AISC_Shape_Table WHERE (W <= 100) AND ((AISC_MANUAL_LABEL LIKE 'MT%') AND (AISC_MANUAL_LABEL LIKE 'WT%'))
It returns a NULL value to me, which i know is NOT because no such values exist. So, I further investigated and tried to use a subquery seeing if IN, ANY, or ALL would work, but to no avail. Can anyone offer up any suggestions? I know that if I can get an example of ONE of them to work, then I'll easily be able to apply it to all of my cases. Otherwise, am I just going about this the hard way or is it even possible? Please, ANY suggestions will help. Thank you in advance.
I am writing a query and have the bulk of it already written.
I am looking at a table that contains customer orders. There is a column named Customer_Order.Status Available values for this column is R, F, H, and C.
I'd like for my query to return all lines that have the value R, F, H.
My where clause is written like this
WHERE CUSTOMER_ORDER.SITE_ID = 'XXX' AND CUSTOMER_ORDER.STATUS = ('R','H','F')
I'm running SQL Server 2008 Feb08 CTP and I've got a tablix with column groupings and row groupings which works nicely, I'm a becomming a big fan of the tablix.
However sometimes the filter I have on a column group returns no records and the whole column group disappears. Is there any way to make this column appear with but with empty cells as I have another tablix down the page with the same columns and I want the columns to all line up on the multiple tablix.
In Version 2005 I used to achieve the equivalent of a column group within a table by adding a list with filter to the cell, this meant the column always was shown, the tablix allows does this much more elegantly but I'll have to go back to the old method if I can't make the column remain.
Below is the stored procedure i have it works fine if i have 1 value passed to @invited_by but i want to modify but i want this code to be working for multiple inputs .Lets say if i do
exec [dbo].[sp_GetInvitationStatusTest] 'Test1 . I get the desired output but i want this procedure to work for exec [dbo].[sp_GetInvitationStatusTest] 'Test1,Test2'. USE [merck_acronyms] GO
I have a field called "Owners", and it's a child to an "Activities" table.
An Activity can have on or more owners, and what I'd like to do is some how comma separate the values that come back if there are more than one owners.
I've tried a subreport, but because the row is colored and if another field, title, expands to a second row (b/c of the length) and the subreport has just one name, then the sub-report has some different color underneath due to it being smaller in height.
I have a report that has 2 dropdowns, selecting from the first dropdown populates the second one. This works fine in the BI Studio.
When I deploy this report to the 'Report Manager' and make a selection from the first dropdown, the second dropdown loads (as expected). I tried to select from the second dropdown (which has only 1 item - which is correct), the dropdown does not appear correctly - as in, I can't see that item.
Since we can't attach anything here, below is the link to a screenshot of my issue: http://docs.google.com/View?docid=ddd6j2xn_52c5qd5
If you look closely at the screenshot from the link above, you'll see that there is a value in the second dropdown - it just won't show completely - as if the dropdown is not rendering correctly. I can view source on the page and see that the dropdown has a value.
What appears to be happening is the if only 1 item is in the second dropdown and that item is longer than the size of the dropdown, the dropdown won't render.
Here is my value for the second dropdown '012 Candy Gadler David Thapero'. This is the only value in the second dropdown. - You can try 35 chars or more in the dropdown to confirm.
Notes: + No special chars are in either dropdown + I am using IE 7 (Also had someone test this on IE 6 - same problem) + Using Visual Studio 2005 to build report - where this works fine
Work around: + If I add another item to the dropdown via a UNION query, I see the original value + the new item in the dropdown #2
I have a table of results for various measured quantites and i need to turn this into a view. Only problem is i need to seperate the measured quantities and their respective values into seperate columns.
A Fact table <<Company Revenue>> 2 Dimension <<Month.Dim>> , <<Company>>
I have 4 company say (A,B,C,D) but i have record for only company A & D that too only for December month .
When I create a SSRS report out of the cube i want a matrix where all the company names to be displayed in the rows & all the months in the columns and company's revenue in data
What my report is displaying :
Company | December ------------------------------------------------------- A | 20000 ------------------------------------------------------- D | 3900 -------------------------------------------------------
what is needed :
Company | January | February | March | ........... | December ----------------------------------------------------------------------------------- A | | | | | 20000 ---------------------------------------------------------------------------------- B | | | | | ---------------------------------------------------------------------------------- C | | | | | ---------------------------------------------------------------------------------- D | | | | | 3900 -----------------------------------------------------------------------------------
I have created a single FULLTEXT on col2 & col3. suppose i want to search col2='engine' and col3='toyota' i write query as
SELECT
TBL.col2,TBL.col3 FROM
TBL INNER JOIN
CONTAINSTABLE(TBL,col2,'engine') TBL1 ON
TBL.col1=TBL1.[key] INNER JOIN
CONTAINSTABLE(TBL,col3,'toyota') TBL2 ON
TBL.col1=TBL2.[key]
Every thing works well if database is small. But now i have 20 million records in my database. Taking an exmaple there are 5million record with col2='engine' and only 1 record with col3='toyota', it take substantial time to find 1 record.
I was thinking this i can address this issue if i merge both columns in a Single column, but i cannot figure out what format i save it in single column that i can use query to extract correct information. for e.g.; i was thinking to concatinate both fields like col4= ABengineBA + ABBToyotaBBA and in search i use SELECT
TBL.col4 FROM
TBL INNER JOIN
CONTAINSTABLE(TBL,col4,' "ABengineBA" AND "ABBToyotaBBA"') TBL1 ON
TBL.col1=TBL1.[key] Result = 1 row
But it don't work in following scenario col4= ABengineBA + ABBCorola ToyotaBBA
SELECT
TBL.col4 FROM
TBL INNER JOIN
CONTAINSTABLE(TBL,col4,' "ABengineBA" AND "ABB*ToyotaBBA"') TBL1 ON
TBL.col1=TBL1.[key]
Result=0 Row Any idea how i can write second query to get result?
This is a report I'm trying to build in SQL Reporting Services. I can do it in a hacky way adding two data sets and showing two tables, but I'm sure there is a better way.
TheTable Order# Customer Status
STATUS has valid values of PROCESSED and INPROGRESS
The query I'm trying to build is Count of Processed and INProgress orders for a given Customer.
I can get them one at a time with something like this in two different datasets and showing two tables, but how do I achieve the same in one query?
Select Customer, Count (*) As Status1 FROM TheTable Where (Status = N'Shipped') Group By Customer
I'm trying to write a query which allows that multiple values from onecolumn are placed in one record.ex:tableNrLetters1A2A2B2C3A3B3C3D3E4AThe result I want to get from an select:NrAll Letters1A2A, B, C3A, B, C, D, E4AOlivier
All I have a table full of invoices and in that table there is a field named HCC. An invoice can contain multiple HCC's. I also have a table named hierarchical codes (below is an example)
(COL1)HCC...........(COL2)If any of the HCCs in this column exist on an invoice along with the HCC in column 1 then use HCC listed in column one 1 2 3.......................4 4 6 8.......................9 ,10 ,11 ,12 ,13
[code]...
I want to return invoice 1 with HCC set to 34 since the hierarchy for when any of these HCCs (35 ,36 ,37 ,38) exist on an invoice along with 34 is 34.
create table #task(TaskId bigint unique, Name varchar(2000)) insert into #task values(1, 'Text Text Text Text Text Text Text <<Name>> Text Text Text <<Salary>>') insert into #task values(2, 'Text Text Text <<Name>> Text Text Text Text <<Company>> Text Text Text <<Salary>> Text Text Text') -- select * from #task
[Code] ....
Now I need to create an inline function who resolve the task name with appropriate values and return me the resolved task name
select * from fn_TaskResolver(1, 'Text Text Text Text Text Text Text <<Name>> Text Text Text <<Salary>>')
I try this function but its return multiple rows as i just want to return one row. as I have big data set so i don't want to use scaler or Multi Line function.
create function fn_TaskResolver(@TaskId bigint, @name varchar(2000) Return table as return ( with data as
In a t-sql 2012, I want to declare variables with multiple values and I am having problems since sql server thinks I am working with numbers when I am really working with character and bit values. Here is a copy of the sql that I am trying to use:
DECLARE @Account varchar(100) DECLARE @Processed bit set @Account = '58100,98326,09897' set @Processed ='0,1'
Thus would you show me what I can do so that the sql server knows that I want the values in the set states above to be varchar or character value for @Account and bit value for @Processed?
I have an ASP.NET form that stores it's data in MSDE but I just added a multi-select ListBox to the form and I'm having a hard time coming up with a way of writing that data to the database. Should I write the values into a column on the same table where I store the rest of the data from the form (values separated by a comma) or shouild I create another table (one to many) and store the data there. I like the second option, but I'm not sure how to loop through each value and write it to the database table.
I grab the values for the selection as follow:
foreach (ListItem lstItem in lbAttendees.Items) { if (lstItem.Selected == true) { grpList.Add(lstItem.Value.ToString()); } }
but I'm not sure on what to do next and could use some help.
I am trying to select the max for each Schedule_Number when ProcessDescription = 'Exit Cold Rinse'. In the following table, 2:00 and4:00 should be returned for 12345_001 and 12345_002 respectively. Ihave tried to join the two queries and would like to use the currentSchedule_Number as one of the criteria when determining the max.Below is some code that I've used thus far? Does anyone havesuggestions?*Schedule_Number * Process_Description * TMDT*12345_001 * Exit Cold Rinse * 1/07/08 01:00:00 PM*12345_001 * Enter Cold Rinse * 1/07/08 01:30:00 PM*12345_001 * Exit Cold Rinse * 1/07/08 02:00:00 PM*12345_002 * Enter Cold Rinse * 1/07/08 02:30:00 PM*12345_002 * Exit Cold Rinse * 1/07/08 03:00:00 PM*12345_002 * Enter Cold Rinse * 1/07/08 03:30:00 PM*12345_002 * Exit Cold Rinse * 1/07/08 04:00:00 PMSelect *From(Select distinct Schedule_NumberFrom dbo.Process_DataWHERE left(Schedule_Number,5) = '12345') as Query1left join(Select *From dbo.Process_DataWhere TMDT =(SELECT Max(TMDT)FROM dbo.Process_DataWHERE Process_Description = 'Exit Cold Rinse' andQuery1.Schedule_Number = Query2.Schedule_Number)) as Query2on Query1.Schedule_Number=Query2.Schedule_Number
Is there a way to insert multiple values into a single column based on various "tests". For example, I want to check a sales_order table and flag all new orders coming in against previous orders placed that were determined to be fraudulent. If I were to set up i.e. five different tests(i.e. check email, credit_card number etc. against previous fraud orders), then there would be the possibility that any given order can be flagged 1 to 5 times. I want to record all of these tests within the same column if possible. Therefore the output may look something like the following:
order_number fraud_score 1234567890 a,b,d 5432109876 e 2345678901 null 3455607983 a,b,c,d,e
I was considering adding five additional columns to the table and running five different update steps, but this doesn't appear very scalable. Any suggestions would be greatly appreciated! thanks in advance- trevorb
Whats the fastest easiest way to take a select that returns say 4 values for the expression into a single column on defined row
basically I mean i want to do an update to say a persons i dunno ummm places they have traveled and I want it listed like france;usa;germany etc etc and the data would always be in the tables i pull from so I can overwrite the data each time i run it but has to take 3 or more values from a query and put them in separated by say a ; into the same persons coloumn that stores the info.
I did this once before with a cursor and adding a variable to itself with colasce or whatever the command was, but was just wondering if there is a fast way to do this by chance that im not thinking about :P.
I'm working on a query that is asking to return data on dependents which a person can have 0-many, in a single row but sep columns. The dependent data I need to include are Dep First Name, Dep Last Name, Dep Relationship.
I know how to check for a sinle vlaue but how do I chekc to see if multiple values exist. I need to check for certain email addresses from a list that I have.
Let us say I ahve 3 email addresses, I want to check for all of them in a table and for eevery email address that is present I want to print something like "You email address is XXX" and if one of those 3 is not found my results should look like
"You email address is XXX" YYYYY not found "You email address is ZZZZ"
I'm attaching some TSQL that I tried on [AdventureWorks2012].[Person].[EmailAddress]
/****** Select ALL if where an email address is present in the list ******/ SELECT EmailAddressID,EmailAddress FROM [AdventureWorks2012].[Person].[EmailAddress] WHERE EmailAddress IN ( 'ken0@adventure-works.com', --1 'terri0@adventure-works.com', --2
[Code] ....
-- Test to see if a single email address is present
IF EXISTS ( SELECT EmailAddress FROM [AdventureWorks2012].[Person].[EmailAddress] WHERE EmailAddress IN ('25rob0@adventure-works.com') ) BEGIN SELECT 'Email address is presnt'
[Code] ....
When I check multiples using EXISTS it works as per its design and says YES even if a single item is present.
