SQL 2012 :: Server Cluster Without Windows Failover Cluster
Feb 18, 2014I´ve been reading that SQL Server 2012 Always On is dependent on having a Windows Failover Cluster setup. Is that correct ?
View 6 Replies
ADVERTISEMENT
DB Engine :: Server 2012 Failover Cluster New Instance
Aug 6, 2015I am new to SQL Server 2012 clustering.I added a new instance to one of the two nodes.when I try to move it to the other node it fails.Do I need to install it on both?If so, what options do you install on the second node?
View 7 Replies View RelatedSQL Server 2012 :: Remove Named Instance From Failover Cluster
Oct 13, 2014In QA we have a two-node cluster with four instances of sql. In trying to add a fifth, I was given an IP address already in use so the install hung.
I removed it from the cluster but it is still there in the registry etc on the node I was working on.
I read about using the maintenance tab of the sql server install to "remove a node" but the terminology is confusing. To me a node is a physical server and an instance is an instance of sql server -- not the same at all but they are often referred to as the same thing.
I definitely don't want to remove one of the servers from the cluster.
Failover Cluster Using 64 Bit Windows 2k3 On Single HBAs And DS400 With Dual Controller
Apr 12, 2006We are trying to setup a system to system failover cluster using twonodes (x346) which each have a single hba running to seperatecontrollers on the DS400.For full redundnancy, IBM recommends dual path from each node but wedont need that. The current setup has two completly seperate paths. hbaon node 1 to controller A on DS400 and hba on node 2 to controller B.If i take a controller offline, failover works fine to jumo to othercontroller and throw all resources to it's node but if i shutdown anode- the cluster loses all attached storage and DS400 is unaware toswitch ownership to other controller.Is there a way to us mscs without dual path from each node?anotherwords... if either node or controller fails on a single path, wewant the other path to become active.our main goal is to use sql server 2005 clustering on the cluster.everything checks out perfect if i only use one controller on the DS400for both nodes but this brings us back to another single point offailure.I saw that Qlogic has MPIO drivers on thir website for the DS400 but itseems as though they are for 32bit systems and the install errors outwith:C:Driversmpio1.0.8.4 (w32)>install.exe -iPre-Installing the Multi-Path Adapter Filter...SuccessInstalling the Multi-Path Bus Driver...Failure. Error code (0xe0000235)configuration:2 X IBM x346 w/ single QLogic 2340 HBAs running win2k3 64bit EnterpriseDS400 w/ dual controllers
View 5 Replies View RelatedSQL 2012 :: Failover Cluster Using Virtual Box
Mar 29, 2014I have virtualbox installed on my notebook. For testing purpose, is it possible to setup SQL Server Fail-Over cluster using virtual box? I don't have a shared storage. How can I simulate that?
View 1 Replies View RelatedSQL 2012 :: How To Create Failover Cluster Using VMs
May 5, 2014How to create a SQL 2012 Failover cluster using VMs?
View 9 Replies View RelatedSetup And Upgrade :: Cluster Group (Available Storage) Reserved By Windows Failover Clustering
Jul 28, 2015I am setting up my first sql node on a 2 node cluster and runing into this
The disks are already added into the failover cluster manager
SQL 2012 :: Create Failover Cluster Without Log Shipping
Jan 21, 2015I am trying to create a failover cluster without the log shipping in 2012 as i've done it with a static instance with some database.Is the "AlwaysON" feature the solution when an application creates random and numerous databases within the instance and we need a failover scenario ?
View 9 Replies View RelatedSQL Server Admin 2014 :: AlwaysOn Failover Cluster Session Failover
Oct 29, 20151. Once fail over to secondary replica, what will happen to connected session in primary node? can the session fail over to secondary seamlessly or need to re-login. what happen committed transactions which has not write to disk.
2. Assume I have always on cluster with three nodes, if primary fails, how second node make write/ read mode.
3. after fail over done to 2nd secondary node what mode in production(readonly or read write).
4. how to rollback to production primary ,will change data in secondary will get updated in primary.
SQL 2012 :: Availability Groups And Failover Cluster Instances
Mar 21, 2014I'm reading up on Always on and I am confused what is the difference between AlwaysOn Availability Groups and AlwaysOn Failover Cluster Instances.
View 3 Replies View RelatedSQL 2012 :: Renamed Failover Nodes For Cluster And Broke It
Apr 17, 2014I had a cluster running on 3 nodes (windows failover cluster) with server 2012 and SQL server 2012 running in the cluster. Well, I thought I'd just go ahead and rename all 3 of the hosts with new hostnames and it apparently broke the cluster pretty bad. Now when I open failover cluster manager I cannot see anything nor can I connect to the cluster object in AD. I re-named all of the hosts back to their original names but that didn't work.
View 5 Replies View RelatedSQL 2012 :: Multi-Site AlwaysOn Failover Cluster
Oct 6, 2014We are implementing a multi-site (Windows Server Failover Cluster) WSFC to enable Always On between our primary and DR site. We are not going to use SQL clustered instances. We are not planning to use shared disks. Each node is running a standalone instance of SQL 2012.
I have successfully configured a 3 node multi-site Windows failover cluster with no shared storage. For quorum, I have defined a File Share Witness (FSW). The FSW has voting rights and is in the DR site. The setup looks like this –
WSFC –
•Node A – Site #1 (voting right = 1)
•Node B – Site #1 (voting right = 1)
•Node C – Site #2 (voting right = 0)
•FSW – Site #2 (voting right = 1)
Again - There are no shared disks in our setup. We are not going to use SQL clustered instance. We are going to use Always On with these 3 nodes.
SQL Always On –
•Node A – Site #1 (Primary Replica)
•Node B – Site #1 (Readable Secondary)
•Node C – Site #2 (Readable Secondary)
All the setup including the “availability group” works properly under this setup. However, a failover to site #2 under DR situation is not working and I know why but don’t know what needs to be done to fix the problem.
The following works fine –
•Automatic failover between nodes A and B (same site – site #1)
•Forced failover to node C in site #2 provided at least one of the nodes in site #1 is up (non – DR situation) - this will ensure the cluster is up
The following is not working –
•Forced failover to node C in site #3 when both nodes in site #1 are lost (true DR situation) – This is because the cluster is not up at this point.
I know I have to bring the cluster up somehow and I have not been able to do so by restarting the cluster service.
I tried to run the command to start cluster service.
Question –
How can I FORCE the cluster to come up in Site #2 on node C when it has no voting rights?
I have always worked with even number of nodes and shared disks with traditional clustering. I am not sure what needs to be done in this scenario with 3 nodes and a FSW.
SQL 2012 :: AG - How To Find Cluster Failover Count In AlwaysOn
Sep 30, 2015How can we find the cluster failover count in always on ?
As my AG is configured as synchronous mode , AG went offline and we manually restarted the AG service when we check the properties on AG role they r in default setting ?
SQL 2012 :: Failover Cluster Install Hangs On Remote Machine Discovery
Feb 18, 2015I am trying to install SQL Server 2012 onto an already configured and validated windows failover cluster (server 2012) but the process is hanging after installing the setup files.
The last entry in the log is:
running discovery on remote machine
and I've left it hanging like this for 4 hours and nothing happens.
Recovery :: Can Join A Node In Windows Cluster Which Is Already In Different Cluster
Oct 8, 2015can we join a node in a windows cluster which is already in a different cluster?
We have this requirement as we need to setup readable secondary ( always on AG) on the third node.
Recovery :: IP Change For Cluster / Nodes And Windows Cluster?
Jul 15, 2015We are planning to change all IPs of PRODUCTION Failover Cluster Setup. In my cluster setup ... we have 2 Physical Nodes with windows-2008, Roles are MSDTC and SQL-2008R2.
IP change for:
1. Both Nodes(Physical)
2. MSDTC
3. SQL Server
4. windows Cluster
So Almost... All IPs are going to change.
Im DBA here, I need to take care of SQL cluster and MSDTC. But I haven't performed this activity before.So I'm worrying about Impacts and consequences of this change. steps how should I perform this activity.
SQL 2012 :: Advanced Cluster Preparation For New Instance On Existing Cluster
Apr 10, 2014I ran the Advanced cluster preparation for a new sql instance on an existing cluster.
Slq Server 2012.
After is completed, it was successful, I realized I specified the wrong Instance Root directory.
Is it possible to remove what the preparation installed? Or is it possible to change the root directory?
SQL 2012 :: How To Clear AD After Destroying Windows Cluster
Jan 4, 2015I was able to do windows cluster successfully on vmware but after destroying it and I wanted to rebuild cluster on same nodes with same vmnode as DC.But Clustering kept failing.... and I had to rebuild entire vmnodes ,ISCSI SAN and Clustering from scratch...
How do I get over this problem.I want to manage cluster so it remains stable after failover or even after shut down of VMnodes????
Recovery :: AlwaysOn Failover Cluster And Active Sessions Failover Scenario
Oct 29, 20151. In alwaysON fail over cluster, Once fail over to secondary replica, what will happen to connected session in primary node? can the session fail over to secondary seamlessly or need to re-login. what happen committed transactions which has not write to disk.
2. Assume I have always on cluster with three nodes, if primary fails, how second node make write/ read mode.
3. After fail over done to 2nd secondary node what mode in production(readonly or read write).
4. How to rollback to production primary ,will change data in secondary will get updated in primary.
SQL 2012 :: VMWare Snapshot Breaks Windows Cluster?
Dec 17, 2013We have set up SQL server 2012 alwaysOn availability group on windows 2012. It runs and fails over successfully. Recently, a VMWare creates a snapshort of a primary and it breaks a cluster. We saw errors in a cluster log.
In VMware setting, The quiesce option is turned off for these VMs. Also, we configured cluster setting :Windowssystem32> (get-cluster).SamesubnetThreshold = 10 ( Relaxed )
Cluster node 'Test1' was removed from the active failover cluster membership. The Cluster service on this node may have stopped. This could also be due to the node having lost communication with other active nodes in the failover cluster. Run the Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapters on this node. Also check for failures in any other network components to which the node is connected such as hubs, switches, or
File share witness resource 'File Share Witness' failed to arbitrate for the file share 'TestTEstQuorum'. ensure that file share 'TestTestQuorum' exists and is accessible by the cluster.In alwaysOn error log, A connection timeout has occurred on a previously established connection to availability replica 'Test1' with id [CAD40D99-E333-457E-9993-BBE977D2CDA2]. Either a networking or a firewall issue exists or the availability replica has transitioned to the resolving role.
One Node Could Not Up In Server Failover Cluster
Jul 23, 2015We have 2 nodes window Server 2012 R2 and SQL Server 2012 Enterprise Version cluster setup. We can switch roles and Node to one node to another and revert back to previous node with out any issues. But we are facing when one Node is restarted. We could not restart that Node in cluster Service start in Failover cluster Manager. Error Details is displayed as below inside double code."Cluster node NODE1 could not to join the cluster because it failed to communicate over the network with any other node in the cluster. Verify the network connectivity and configuration of any network firewalls."
I checked windows firewall. windows firewall is all of in Node1, Node2, SAN and DC.I have disabled and enabled the Internal and private network of Node 1. I have validated the cluster. it is showing no error though.
Node1:
Public IP: 10.10.0.11
SubNet Mask:255.255.255.0
Default Getway: 10.10.0.1
Prefered DNS: 10.10.0.10 (Ip of DNS)
[code]....
Private Network: Not configured.pinging to each other ip is successful from one node to another.
Sql Server 2005 Set Up Failover Cluster
Dec 12, 2006We have sql server 2005 installed locally on 2 servers and want to set up failover clustering. Do we need to uninstall what we have then install as failover cluster? Thanks.
Upgrade SQL Server 2000 Failover Cluster From SP3 To SP4
Sep 13, 2006I have a production failover cluster running SQL Server 2000 at SP3that I want to upgrade to SP4. I do not have a test failover clusterto test with so I need the install on the primary server to work thefirst time. Per the information I have I just install the patch on theprimary server and it will install both on the primary and on thesecondary.However, I remember when I did the initial install and it failed. Thefirst problem traced to the fact that the install uses temporary filesunder the profile of the installing administrator and the id had neverlogged into the second server so the install failed on creating thetemporary file. The was a second problem that related to an OS featurethat had to be off for the install to work.If anyone out there has done this upgrade and remembers encountering aproblem and its fix/workaround I would appreciate a head up warning.Thank you-- Mark D Powell --
View 1 Replies View RelatedNeed SQL Server Failover Cluster 2005 Info
Apr 16, 2008
Hi all,
I need some help to known more about basics of SQL Server 2005 failover cluster . pls provide me link to
known the concept.
Thanks,
Nav
SQL 2012 :: Does Secondary Replicas In AlwaysOn Have To Reside In Windows Cluster Servers
Sep 18, 2014I know now that AlwaysOn feature HAS to be installed/configured on a Windows Clustering environment, BUT the secondary replicas, like the Disaster recovery replica residing in a different Data Center HAS to be also in a Windows Clustering environment or can it reside on a SINGLE SQL Server INSTANCE?.
View 6 Replies View RelatedSQL Server 2005 Failover Cluster Install Tips
Feb 8, 2008I've never performed this type of installation. Any tips/ tricks you could provide would be greatly appreciated.
View 10 Replies View RelatedSQL Server Admin 2014 :: Window Failover Cluster
Jul 21, 2015I have installed 2 node windows Fail-over clusters successfully. But QUARUM Configuration is not appearing in Failover cluster manager instead "Witness: Disk (Disk Cluster 4)". I have also configured quarum configuration from Quarum "Configure Cluster QUARUM Settings". I have attached the snapshots of windows cluster configuration. Is it the issue or not. I have not got any warning and error during cluster validation while installing Windows failover cluster. I am assuming it is okay and i can move ahead to installation of SQL Failover cluster setup.
Products used for installation in Virtual Machine:
Windows Server 2012 R2
SQL Server 2012 R2
Note: Service Pack is not installed.
SQL Server 2005 Failover Cluster Installation Hang
Jun 11, 2008Hai -
Currently i am do sql server 2005 failover cluster installation on win 2003 server.
It is showing preparing to install please wait and there is no progress from last two hours.
Is there any way to check whether installation is going on or where can i check log files for this installation.
Please advise asap.
Cheers:)
vsh
DSNLess Connection With Failover On SQL Server 2005 Cluster ?
Nov 20, 2006Hi,
We have configured two SQL Server 2005 in a cluster (without Witness).
We have severals ASP (using ADO) that are connecting to SQL Server 2005 with SQL Native Client in a DSNLess connection String :
driver={SQL Native Client}; server=MAINMAIN; Failover Partner=BCKUPBCKUP; uid=log;pwd=pwd;database=MyBase
When using this connection string, the connection to MAIN is alrigth, but when we simulate a unavailability situation on "MyBase" or on the entire MAIN instance, the new connection are joining the MAIN and not the BCKUP SQL Server.
We tryed several Connection Strings including Failover_Partner, Initliag Catalog instead of database... but no one succed in joining the BCKUP SQL Server.
I precise that the DNS on the PC that connect to SQL server is configured and both MAIN and BCKUP are resolved in command line or in explorer.
Is there an other driver that must be used, or is there an other parameter to set in the connection string ?
Regards.
DSNLess Connection With Failover To A SQL Server 2005 Cluster
Nov 20, 2006Hi,
We have configured two SQL Server 2005 in a cluster (without Witness).
We have severals ASP (using ADO) that are connecting to SQL Server 2005 with SQL Native Client in a DSNLess connection String :
driver={SQL Native Client}; server=MAINMAIN; Failover Partner=BCKUPBCKUP; uid=log;pwd=pwd;database=MyBase
When using this connection string, the connection to MAIN is alrigth, but when we simulate a unavailability situation on "MyBase" or on the entire MAIN instance, the new connection are joining the MAIN and not the BCKUP SQL Server.
We tryed several Connection Strings including Failover_Partner, Initliag Catalog instead of database... but no one succed in joining the BCKUP SQL Server.
I precise that the DNS on the PC that connect to SQL server is configured and both MAIN and BCKUP are resolved in command line or in explorer.
Is there an other driver that must be used, or is there an other parameter to set in the connection string ?
Regards.
Sql Server 2005 SP2 Unattended Install For Failover Cluster
Jan 17, 2008
Hello All, I am trying the following script to upgrade SQL Server 2005 SP1 to SP2. I have an Active Passive cluster configuration. I have default instances of SQL Server. I am using the following script.
start /wait c:1sqlserversp2SQLSERVER2005SP2-KB921896-x86-ENU.exe /allinstances /quiet.
The sql server install fails to run. When I used the above command with just
start /wait c:1sqlserversp2SQLSERVER2005SP2-KB921896-x86-ENU.exe /quiet still the summary.txt file came with authentication success and that is all. I changed the above script and did
start /wait c:1sqlserversp2SQLSERVER2005SP2-KB921896-x86-ENU.exe /instancename=instancename of the cluster
This worked, however the install patched the passive node (DB engine, all the cluster unaware components) but failed to patch the DB engine on the Active node. I had to run the SQL Server sp2 install manually but still it did not patch the DB engine on the primary node
1. Can someone please help me with this issue as I want the unattended install to work. so it installs both active and passive node. I will post the final output and also the ADS script to do this as a bonus if this works.
Here is the summary.txt file.
**********************************************************************************
Processes Locking Files
Process Name Feature Type User Name PID
msftesql Database Services Service 5152
MSSQLSERVER Database Services Service 4412
ResrcMon.exe Database Services Application SHOMSCSService 4688
**********************************************************************************
Product Installation Status
Product : Setup Support Files
Product Version (Previous): 3042
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : Database Services (MSSQLSERVER)
Product Version (Previous): 2153
Product Version (Final) :
Status : Failure
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
Error Number : 29506
Error Description : MSP Error: 29506 SQL Server Setup failed to modify security permissions on file D:Microsoft SQL ServerMSSQL.1MSSQLData for user sqlservice. To proceed, verify that the account and domain running SQL Server Setup exist, that the account running SQL Server Setup has administrator privileges, and that exists on the destination drive.
----------------------------------------------------------------------------------
Product : Integration Services
Product Version (Previous): 3042
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : SQL Server Native Client
Product Version (Previous): 3042
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : Client Components
Product Version (Previous): 3042
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : MSXML 6.0 Parser
Product Version (Previous): 1129
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : SQLXML4
Product Version (Previous): 3042
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : Backward Compatibility
Product Version (Previous): 2004
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : Microsoft SQL Server VSS Writer
Product Version (Previous): 3042
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
**********************************************************************************
Summary
One or more products failed to install, see above for details
Exit Code Returned: 29506
SQL Server 2008 :: Change IP Address Of Failover Cluster Instances
Mar 9, 2011IF you need to change the IP Address of a SQL Server Failover Cluster instance, here is the steps:
1. Open up Failover Cluster manager.
2. Expand the MS Cluster Instance that your SQL Cluster instance resides on.
3. Expand Services and applications.
4. Select the SQL Server Service.
5. In the main window pane (Middle Screen), you should see your SQL Server Cluster name, expand the plus to the left of it.
6. Under your SQL Server Cluster name, you should now see an 'IP address' section, right click on it and go to properties.
7. In the properties pane, you can change your IP address by entering a static IP.....or assigning a DHCP enabled IP.
SQL Server 2008 :: Installing Reporting Services On Failover Cluster
Jun 16, 2015if it is supported to install Reporting Services on both the active and passive nodes in an SQL Server Failover Cluster and use the non-active node as a warm standby?We have relatively simple reporting requirements so the idea would be that if Node 1 went down, we could just repoint our users are Node 2 temporarily. Both reporting services instances would be configured to target the same SSRS database running on the SQL Cluster.
View 2 Replies View Related