where including/excluding a single column in an empty staging table would influence a resultset returning from distributed query? Both servers are SQL Server 2012. Nothing special about the staging table. It contains 12 columns with a mixture of INT and NVARCHAR(256) columns. In one case I exclude the column and the query returns in 17 seconds. When I include it the query does not return. Excluding the INSERT INTO the staging table and query returns in 17 secs with and without the column.
I am trying to run an update statement against a vendor's database that houses HR information. If I run a regular select statement against the database with the following query, it returns without error:
SELECT "QUDDAT_DATA"."QUDDAT-INT", "NAME"."INTERNET-ADDRESS", "QUDDAT_DATA"."QUDFLD-FIELD-ID", "QUDDAT_DATA"."QUDTBL-TABLE-ID" FROM "SKYWARD"."PUB"."NAME" "NAME", "SKYWARD"."PUB"."QUDDAT-DATA" "QUDDAT_DATA" WHERE ("NAME"."NAME-ID"="QUDDAT_DATA"."QUDDAT-SRC-ID") AND "QUDDAT_DATA"."QUDTBL-TABLE-ID"=0 AND "QUDDAT_DATA"."QUDFLD-FIELD-ID"=16 AND "QUDDAT_DATA"."QUDDAT-INT"=11237When I try to convert it into an
[Code] ....
I am assuming I am receiving this error because it doesn't know where to find QUDDAT-INT? How can I fix that?
The "QUDDAT-INT" column houses the employee number. So in the case of the SELECT query above, I am testing against a specific employee number.
I am trying to add a where condition on an ID column(type - INT) with values coming from a variable (type - STRING). i am using cast to cast the ID as Varchar and then apply the condition, but i am not getting any results back. following is an example of what i am trying to do.using temp table in the example , so you can copy the t-sql and run as is.
Is it possible to stop a query from running if a condition is not met?
I have a stored procedure that returns some email addresses. A condition is that a load of new data should have happened in the current month.
If a load of new data hasn't happened I want the stored procedure to stop and return an error message instead of returning the email addresses.
I have a variable that finds the maximum data load date and I thought I could use an IF... ELSE... to check if new data had been loaded. Like this:
DECLARE @MaxLoadDate as date = (select max(load_date) from #table) IF @MaxLoadDate<Dateadd(month, Datediff(month, 0, Getdate()), 0) --First Day of Current Month <Something here to kill the query> ELSE SELECT email_address FROM... etc
I've tried a couple of things like PRINT 'Error', and SET NO EXEC ON, but the query seems to happily carry on past the IF condition and return the email addresses. I know that data hasn't been loaded this month, so it should fail.
querey is--TABLE1 HAS A COLUMN CALLED CITY .THE RECORDS WITH CITY='DELHI' ARE IS TO BE UPDATED WITH CITY='MUMBAI' AND THE RECORDS WITH CITY='MUMBAI' ARE IS TO BE UPDATED WITH CITY='DELHI' ...
i HAVE TO WRITE A SINGLE SQLSTATEMENT TO DO THIS NOT WITH THE HELP OF CURSOR
1.First i need to update the row if the status column is 0 to 1 2.Need to insert the row IF SegmentId=@SegmentId and SubjectId<>@SubjectId and StaffId=@StaffId 3.Need to insert the row IF StaffId<>@StaffId And ClassId=@ClassId and SegmentId<>@SegmentId and SubjectId<>@SubjectId
I have wrote the stored procedure to do this. But the problem is If do the update. It is reflecting in the database by changing 0 to 1. But it shows error like cannot insert the duplicate
Here is the stored Procedure what i have wrote
ALTER PROCEDURE [dbo].[InsertAssignTeacherToSubjects]
update a tables value(a single column), based on a query of another database, using a common column.
Here's what I've cooked up so far:
Declare @trackingNo nvarchar (50) Set @trackingNo = ( select tracking_no from P21_Shipping.dbo.shipping_data t1 inner join P21.dbo.oe_hdr t2 on t1.order_no = t2.order_no
[Code] ...
print @trackingNoThe error it's returning is:
Msg 512, Level 16, State 1, Line 3 Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
So, I'm wanting to query Shipping_data for order_No that matches the same orderNo column value in P21 Database(oe_hdr table), then update P21 oe_hdr table with "trackingNo from Shipping_data
I would like to update/insert data into a Orderhearder Table along with the related details into the corrosponding OrderDetails Tables. Can this be done using a single stored procedure or do we have to make one call to the UpdateOrderHeader Stored Procedure and loop thru all the details and call the UpdateOrderDetails Stored Procedure. How do we handle the Transactions in such a case ?
While working with a vast variety of support projects, i find a sql design where all the fields in a single form (say about 100 fields which are dump data as they are not related to any reports and searching criteria) are dumped in a sql database column in a XML format. See below an example
Hello all. I hope someone can offer me some help. I'm trying to construct a SQL statement that will be run on a Dataset that I have. The trick is that there are many conditions that can apply. I'll describe my situation:
I have about 1700 records in a datatable titled "AISC_Shapes_Table" with 49 columns. What I would like to do is allow the user of my VB application to 'create' a custom query (i.e. advanced search). For now, I'll just discuss two columns; The Section Label titled "AISC_MANUAL_LABEL" and the Weight column "W". The data appears in the following manner:
(AISC_Shapes_Table)
AISC_MANUAL_LABEL W W44x300 300 W42x200 200 (and so on) WT22x150 150 WT21x100 100
(and so on) MT12.5x12.4 12.4 MT12x10 10 (etc.)
I have a listbox which users can select MULTIPLE "Manual Labels" or shapes. They then select a property (W for weight, in this case) and a limitation (greater than a value, less than a value, or between two values). From all this, I create a custom Query string or filter to apply to my BindingSource.Filter method. However I have to use the % wildcard to deal with exceptions. If the user only wants W shapes, I use "...LIKE 'W%'" and "...NOT LIKE 'WT%" to be sure to select ONLY W shapes and no WT's. The problems arises, however, when the user wants multiple shapes in general. If I want to select all the "AISC_MANUAL_LABEL" values with W <= 40, I can't do it. An example of a statement I tried to use to select WT% Labels and MT% labels with weight (W)<=100 is:
Code SnippetSELECT AISC_MANUAL_LABEL, W FROM AISC_Shape_Table WHERE (W <= 100) AND ((AISC_MANUAL_LABEL LIKE 'MT%') AND (AISC_MANUAL_LABEL LIKE 'WT%'))
It returns a NULL value to me, which i know is NOT because no such values exist. So, I further investigated and tried to use a subquery seeing if IN, ANY, or ALL would work, but to no avail. Can anyone offer up any suggestions? I know that if I can get an example of ONE of them to work, then I'll easily be able to apply it to all of my cases. Otherwise, am I just going about this the hard way or is it even possible? Please, ANY suggestions will help. Thank you in advance.
I am trying to build a DIM table using a source table that has the following setup...
CREATE TABLE [dbo].[APPL_STATUSES]( [APPLICATIONS_ID] [varchar](10) NOT NULL, [POS] [decimal](10, 0) NOT NULL, [APPL_STATUS] [varchar](5) NULL, [APPL_STATUS_DATE] [datetime] NULL, [APPL_APPLICANT] [varchar](10) NULL) GO
[code]....
What I am trying to do is to break out the APPL_STATUS_DATE into a STATUS_START_DATE and an STATUS_END_DATE in a new table. I also need to be able to update the STATUS_END_DATE based on the previous day's date. Like so...
CREATE TABLE [dbo].[APPL_APPLICANT_STATUSES]( [APPLICATIONS_ID] [varchar](10) NOT NULL, [POS] [decimal](10, 0) NOT NULL, [APPL_STATUS] [varchar](5) NULL, [STATUS_START_DATE] [datetime] NULL, [STATUS_END_DATE] [datetime] NULL, [APPL_APPLICANT] [varchar](10) NULL) GO
I have a description field in a table which also stores unit of measure in the same column but with some space between them, I need to split these into two different columns.
Table Name:-emp table structure:- Name Gender A Male B Male C FeMale D FeMale I want only one update query to update this table like this table structure:- Name Gender A FeMale B FeMale C Male D Male please help me?
12.) Now you have two different tables - each with two columns.Table #1Single Column2 rows with a value equal to 1 and 2Table #2Single column2 rows with a value equal to 2 and 4Construct a statement returning in a single column all the valuescontained, but not the common values.This is another question that I got in an interview, I missedit.......Thanks,Tim
I need to write a single query that will append the values from one table into another table but I need to update a single field in the table with a static value. What I'm working with is an Access .adp with an SQL 2000 backend. The database is used to track ticket sales, payments, and contact info for season ticket holders. Prior to upsizing, each year the database would be copied and then choice bits modified for the next year.
In other words, the history was in several databases, i.e. db2001, db2002, db2003 and for the current year dbcurrent. I decided to create a historic tables in the current DB rather than have umpteen DBs on my SQL server.
My problem is that I need to create a query that appends to my table the previous years data and then updates the season field to reflect the season that the data came from.
In short, say I have a table named accounts with fields account, customer, addr1, addr2, ..., ticket type and I want it to end up in account_hist with fields account, customer, addr1, addr2, ..., ticket type, SEASON and make the season equal say 8 which represents the 8th season the team has played. I can get both queries to work seperately :D , but for end user ease, I want to perform both actions at the same time :confused: . Can anybody point me in the right direction? Thanks
I'm collecting id based on user's selection and storing to ArrayList/String[in asp.net]. Now want to pass those ids stored to stroed procedure. I want SP to update all records in single statement using in like update table set field in (value).
I'm storing id with comma (,) separator. Below is my asp.net code:
string sId=string.Empty;
for(int a=0;a<Id.Count;a++)
{
Id += Id;
if(a!=Id.Count-1)
sId +=",";
}
In database id column is int type. I'm passing id collected with comma separator and passing it as a parameter to SP. but it is giving error related converting to int or similar.
Plz help me create Stored Procedure in SQL 2005 based on above scenario.
I need to update multiple columns in a table with multiple condition.
For example, this is my Query
update Table1 set weight= d.weight, stateweight=d.stateweight, overallweight=d.overallweight from (select * from table2)d where table1.state=d.state and table1.month=d.month and table1.year=d.year
If table matches all the three column (State,month,year), it should update only weight column and if it matches(state ,year) it should update only the stateweight column and if it matches(year) it should update only the overallweight column
I can't write an update query for each condition separately because its a huge select
I am using 3 tables: projects, project_manager and project_employee
projects
- project_id (int, PK) - project_name
project_manager
- project_id (int, PK) - manager_id (int, PK)
project_employee
- project_id (int, PK) - employee_id (int, PK)
Assume that a manager is currently logged in (so we know what is his ID), what I trying to do is write a query that will display a grid-view showing:
project_id, project_name and number of employees in project.
I tried these quires to test:
SELECT project_id, count(emp_id) as NumberOfEmployees into #tempTable FROM project_employee WHERE project_id IN (SELECT project_id FrOM projects) GROUP BY project_id
SELECT projects.project_id, projects.project_name, NumberOfEmployees FROM projects, #tempTable WHERE projects.project_id = #tempTable.project_id
Problems are: 1 - I used two queries not one 2 - The result is for all projects of all managers, I just want to display projects for a specific manager (for example mag_id = 5) 3 - it created a temporary table - which I dont want.
Is there anyway to get what I want in a single query?
Hi groupI have a rather peculiar question, and I really don't know how to solvethis within an SQL statement:Given a view (v), that results in:IDX-----------------1a1b2a2c3aI'd like to query the view with something like:SELECT ID FROM v WHERE (X='a' AND X='b') which would result in:ID-----------------1or in another case:SELECT ID FROM v WHERE (X='a' OR X='c')would give:ID-----------------123how can this be done?TIAbernhard--www.daszeichen.chremove nixspam to reply
I have a student table like this studentid, schoolID, previousschoolid, gradelevel.
I would like to load this table every day from student system.
During the year, the student could change schoolid, whenever there is a change, I would put current records schoolid to the previous schoolid column, and set the schoolid as the newschoolid from student system.
My question in my merge statement something like below
Merge into student st using (select * from InputStudent ins) on st.id=ins.studentid
When matched then update
set st.schoolid=ins.schoolid , st.previouschoolid= case when (st.schoolid<>ins.schoolid) then st.schoolid else st.previouschoolid end , st.grade_level=ins.grade_level ;
My question is since schoolid is et at the first line of set statement, will the second line still catch what is the previous schoolid?
I have a query that I'm stumped on. The data has about 6000 records, of which about 460 of those have distinct dealer names and ids.
I am trying to condense this data so that there is only one record for each dealer, but my 3rd column has different values which is why some dealers have only 2 records, and others may have 10.
I know how to select distinct values, but what I want is to return a list of comma separated values for my 3rd column which consists of all the unique values from that 3rd column for that dealer.
For instance, say I have a dealer with 8 records. They have a unique ID and Dealer Name, but the 8 records appear because the dealer has 8 entries for its activity. The activities may or may not be unique.
So for example I have dealer ABC who has an id of 54, their name is ABC, but for their activites they have 8 entries (apple, orange, banana, pear, apple, banana, mango, peach).
I wnt to be able to select the distinct id, name, and distinct activities so that when my query is returned and displayed the record appears as such:
