There is a valuable script out there that will take the rows from a table and display INSERT STATEMENTS.
Good thing is this script converts the data to HEXADECIMAL ( or some other ) and we don't have to worry about dealing with apostrophies embedded in varchar fields.
How to create insert statements of the data from a table for top 'n' rows. I know we can create using generate scripts wizard, but we can't customize the number of rows. In my scenario i got a database with 10 tables where every table got millions of records, but the requirement is to sample out only top 10000 records from each table.
I am planning to generate table CREATE statements from GENERATE Scripts wizard and add this INSERT STATEMENT at the bottom.
EX : INSERT [dbo].[table] ([SERIALID], [BATCHID] VALUES (126751, '9100278GC4PM1', )
In a t-sql 2012 sql script, I have the following script, that only works for a few records since the value of TST.dbo.LockCombination.seq only contains the value or 1 in most cases. Basically for every join listed below, there should be 5 records where each record has a distinct seq value of 1, 2, 3, 4, and 5. Thus my goal is to determine how to add the missing rows to the TST.dbo.LockCombination where there are no rows for seq values of between 2 to 5. I would like to know how to insert the missing rows and then do the following update statement. Thus can you show me the sql on how to add the rows for at least one of the missing sequence numbers?
UDATE LKC
SET LKC.combo = lockCombo2
FROM [LockerPopulation] A
JOIN TST.dbo.School SCH ON A.schoolnumber = SCH.type
JOIN TST.dbo.Locker LKR ON SCH.schoolID = LKR.schoolID AND A.lockerNumber = LKR.number
JOIN TST.dbo.Lock LK ON LKR.lockID = LK.lockID
JOIN TST.dbo.LockCombination LKC ON LK.lockID = LKC.lockID
WHERE LKC.seq = 2
A normal select statement looks like the following:
select * from TST.dbo.Locker LKR
JOIN TST.dbo.Lock LK ON LKR.lockID = LK.lockID
JOIN TST.dbo.LockCombination LKC ON LK.lockID = LKC.lockID
where LKR.number in (000,001,1237)
In case you need the ddl statements for the tables affected here are the ddl statements:
CREATE TABLE [dbo].[Locker](
[lockerID] [int] IDENTITY(1,1) NOT FOR REPLICATION NOT NULL,
[schoolID] [int] NOT NULL,
[number] [varchar](10) NOT NULL,
[serialNumber] [varchar](20) NULL,
[type] [varchar](3) NULL,
[locationID] [int] NULL,
[code]...-
I am finding it difficult to find an example that allows for insertion of additional rows into a table, without dropping the table I'm inserting into. Or inserting specific values. Like this example..
[URL] ....
I have 6 table I am formatting the data to conform to the final table as I'm inserting it into, but none of these examples gives me the example needed. I am using SQL 2012.
<code>
SELECT
CONVERT(VARCHAR(50),[FName]) + ' ' + CONVERT(VARCHAR(50),[LName]) AS [CustName]
,CAST('ALARMCOM' as nvarchar(8)) as VendorName
,CONVERT(VARCHAR(25),[CUSTOMER_CS_ACCOUNT_NUMBER]) AS [Cust_ID]
,CONVERT(VARCHAR(40),[Charge_Description])as [ChargeType]
,CASE
[Code] ....
I have created a trigger that is set off every time a new item has been added to TableA.The trigger then inserts 4 rows into TableB that contains two columns (item, task type).
Each row will have the same item, but with a different task type.ie.
TableA.item, 'Planning'
TableA.item, 'Design'
TableA.item, 'Program'
TableA.item, 'Production'
How can I do this with tSQL using a single select statement?
I have a table with PO#,Days_to_travel, and Days_warehouse fields. I take the distinct Days_in_warehouse values in the table and insert them into a temp table. I want a script that will insert all of the values in the Days_in_warehouse field from the temp table into the Days_in_warehouse_batch row in table 1 by PO# duplicating the PO records until all of the POs have a record per distinct value.
Example:
Temp table: (Contains only one field with all distinct values in table 1)
Days_in_warehouse
20
30
40
Table 1 :
PO# Days_to_travel Days_in_warehouse Days_in_warehouse_batch
1 10 20
2 5 30
3 7 40
Updated Table 1:
PO# Days_to_travel Days_in_warehouse Days_in_warehouse_batch
1 10 20 20
1 10 20 30
1 10 20 40
2 5 30 20
2 5 30 30
2 5 30 40
3 7 40 20
3 7 40 30
3 7 40 40
How can I update Table 1 to see desired results?
SSMS 2012: when you open up many sql files in the IDE, it starts hiding some tabs and you have to click on the drop down at the right to navigate to the tab you want. Is there a way to make it display more than one row of tabs, so that tabs are not hidden and always displayed?
View 3 Replies View RelatedSee pic
Syntax on using BCP.
Here is my Requirements: I have a file that has a bunch of INSERT STATEMENTS. So the stuff inside the file looks like the following:
File has about 5000 rows.
INSERT INTO abc ( name ) VALUES ( 'Peter' );
INSERT INTO abc ( name ) VALUES ( 'Bob' );
I'd I have a problem I'd like to post CREATE TABLE and INSERT statementsthat will create my table and insert data into the table.I can use the scripting feature in Enterprise Manager to generate CREATETABLE scripts.Is there a script I can run that will generate INSERT statements so I caninclude sample data.Thanks
View 1 Replies View RelatedDECLARE @emp VARCHAR(1024) declare @emp1 varchar(1024)declare @emp2 varchar(1024)SELECT @emp1 = COALESCE(@emp1 + ',', '') + cast(eid as varchar(10)),@emp = COALESCE(@emp + ',', '') + ename ,@emp2 = COALESCE(@emp2 + ',', '') + desigFROM emp SELECT eid=@emp1,ename = @emp,desig=@emp2
View 1 Replies View RelatedI have a dataset that when run returns 270 rows. The table using the dataset in the report only prints the first row. I have the table grouped by a status type, but this is for when I can get multi-select paramenters installed and working. For now I just need the report to print all the returned rows. Help!!
Thanks!
Terry
I have a database which will be generated via script. However there are some tables with default data that need to exist on the database.I was wondering if there could be a program that could generate inserts statments for the data in a table.I know about the import / export program that comes with SQL but it doesnt have an interface that lets you copy the insert script and values into an SQL file (or does it?)
View 7 Replies View RelatedHi all,
I have a table which I would like to export to a series of insert statements (in a file maybe). Is this possible somehow?
Alternatively, I could use an existing xml document which contains table metadata (table name, column names,types etc) to transfer data from these particular columns to another database replica.
Thanks,
Yannis
I have a temp table with the following columns and data
drop table #temp
create table #temp (id int,DLR_ID int,KPI_ID int,Brnd_ID int)
insert into #temp values (1,2343,34,2)
insert into #temp values (2,2343,34,2)
insert into #temp values (3,2343,34,2)
[Code]....
I use the rank function on that table and get the following results
select rank() over (order by DLR_ID,KPI_ID,BRND_ID ) Rown,* from #temp
I am interested only in Rown and Id columns. For each Rown number, I need to get the min(ID) in the second column and the duplicate ID should be in 3rd column as shown below.If i have 3 duplicate IDs , I should have 3 rows with 2nd column being the min(id) and 3rd column having one of the duplicate ids in ascending order(as shown in Rown=6)
Is there a way to control how many Detail Rows are displayed on one page in Table and Matrix controls?
View 1 Replies View RelatedHi,
Can anybody tell how to ristrict the number of rows per page in SSRS?
I have a table in my report.I know we have to use" =Int(RowNumber(Nothing)/25)" in group expression.But I already have 3 group expression in my table.Where to write??
Thanks.
I created a CTE which finds a subset of records from a table
I then ran a SELECT statement against the same table as
SELECT * FROM TABLE
EXCEPT (SELECT * FROM CTE)
Is it possible to add another EXCEPT statement after the CTE EXCEPT statement to cover a condition not incorporated in the CTE definition?
Hi can anyone help me with the format of my stored procedure below.
I have two tables (Publication and PublicationAuthors). PublicaitonAuthors is the linking table containing foreign keys PublicaitonID and AuthorID. Seeming as one Publication can have many authors associated with it, i need the stored procedure to create the a single row in the publication table and then recognise that multiple authors need to be inserted into the linking table for that single PublicationID. For this i have a listbox with multiple selection =true.
At the moment with the storedprocedure below it is creating two rows in PublicaitonID, and then inserting two rows into PublicationAuthors with only the first selected Author from the listbox??? Can anyone help???ALTER PROCEDURE dbo.StoredProcedureTest2
@publicationID Int=null,@typeID smallint=null,
@title nvarchar(MAX)=null,@authorID smallint=null
AS
BEGIN TRANSACTION
SET NOCOUNT ON
DECLARE @ERROR Int
--Create a new publication entry
INSERT INTO Publication (typeID, title)
VALUES (@typeID, @title)
--Obtain the ID of the created publication
SET @publicationID = @@IDENTITY
SET @ERROR = @@ERROR
--Create new entry in linking table PublicationAuthors
INSERT INTO PublicationAuthors (publicationID, authorID)
VALUES (@publicationID, @authorID)
SET @ERROR = @@ERROR
IF (@ERROR<>0)
ROLLBACK TRANSACTION
ELSE
COMMIT TRANSACTION
Hi can anyone help me with the format of my stored procedure below.
I have two tables (Publication and PublicationAuthors). PublicaitonAuthors is the linking table containing foreign keys PublicaitonID and AuthorID. Seeming as one Publication can have many authors associated with it, i need the stored procedure to create the a single row in the publication table and then recognise that multiple authors need to be inserted into the linking table for that single PublicationID. For this i have a listbox with multiple selection =true.
At the moment with the storedprocedure below it is creating two rows in PublicaitonID, and then inserting two rows into PublicationAuthors with only the first selected Author from the listbox??? Can anyone help???ALTER PROCEDURE dbo.StoredProcedureTest2
@publicationID Int=null,@typeID smallint=null,
@title nvarchar(MAX)=null,@authorID smallint=null
AS
BEGIN TRANSACTION
SET NOCOUNT ON
DECLARE @ERROR Int
--Create a new publication entry
INSERT INTO Publication (typeID, title)
VALUES (@typeID, @title)
--Obtain the ID of the created publication
SET @publicationID = @@IDENTITY
SET @ERROR = @@ERROR
--Create new entry in linking table PublicationAuthors
INSERT INTO PublicationAuthors (publicationID, authorID)
VALUES (@publicationID, @authorID)
SET @ERROR = @@ERROR
IF (@ERROR<>0)
ROLLBACK TRANSACTION
ELSE
COMMIT TRANSACTION
Create table #table (id int identity , from_country varchar(20) ,
to_country varchar(20),noofdays int, datetravel datetime )
insert into #table(from_country,to_country,noofdays,datetravel)
values
('Malaysia','India',2,getdate()-99),
('India','Singapore',4,getdate()-88),
('Singapore','China',5,getdate()-77),
('China','Japan',6,getdate()-66),
('Japan','USA',7,getdate()-55)
select * from #table
I want to insert data to another table based on "noofdays" columns. If "noofdays" is 4 then 4 rows should inserted to new table with 1 day increment in "datetravel" column.
Ex :
#table
1MalaysiaIndia22015-02-09 02:04:09.247
2IndiaSingapore42015-02-20 02:04:09.247
[code]...
In #table , 1st row noofdays is 2 , so in new table #table_new first 2 rows should inserted with 1 day increment in "datetravel" column.
I have created a table Table with name as Varchar and id as int. Now i have started inserting the rows like, insert into Table values ('arun',20).Yes i have inserted a row in the table. Now i have got the values " arun's ", 50. insert into Table values('arun's',20) My sqlserver is giving me an error instead of inserting the row. How will you solve this problem?
I have encountered some weird behaviour. Code that has been working for "eternities" suddenly started to fail. I couldn't recreate it on any other machines.
I have written a sample script to illustrate the issue:
CREATE TABLE #t_parcels (parcel_id INT, current_pos NUMERIC(28, 0), end_pos NUMERIC(28, 0))
CREATE TABLE #t_orders (outorder INT, parcel_id INT)
CREATE TABLE #t_missing_parcels (parcel_id INT, diff INT)
INSERT INTO #t_parcels (parcel_id, current_pos, end_pos)
SELECT1, 100000000000.0, 900000000000.0
[Code] ..
The last insert crashed with :"Arithmetic overflow error converting expression to data type int", even though there are no rows that satisfies the condition!
This is due to "diff" column having wrong datatype, BUT, the insert had no hits in the database. So how can inserting 0 rows crash with incorrect datatype?
I even copied the select so it was ran before the insert, in in that case, the SELECT completed successfully.
When i changed datatype in the table, the error went away, but I'm still curious what led to the error.
I create a Trigger that allows to create news row on other table.
ALTER TRIGGER [dbo].[TI_Creation_Contact_dansSLX]
ON [dbo].[_IMPORT_FILES_CONTACTS]
AFTER INSERT
AS
[code]...
But if I create an INSERT with 50 rows.. My table CONTACT and ADDRESS possess just one line.I try to create a Cursor.. but I had 50 lines with an AdressID and a ContactID differently, but an Account and an AccountId egual on my CONTACT table :
C001 - AD001 - AC001 - ACCOUNT 001
C002 - AD002 - AC001 - ACCOUNT 001
C003 - AD003 - AC001 - ACCOUNT 001
C004 - AD004 - AC001 - ACCOUNT 001
C005 - AD005 - AC001 - ACCOUNT 001
I search a means to have 50 lines differently on my CONTACT table.
C001 - AD001 - AC001 - ACCOUNT 001
C002 - AD002 - AC002 - ACCOUNT 002
C003 - AD003 - AC003 - ACCOUNT 003
C004 - AD004 - AC004 - ACCOUNT 004
C005 - AD005 - AC005 - ACCOUNT 005
I have database test007DB and I need count all table rows then insert into test99 table using ssis packages .
test99: tableName countRows
t1 20
t2 30
t3 25
I am using SQL SERVER 2012..I have the following table:
tbtab1
| A | B | C |
| 1 | Pluto | NULL |
| 2 | Pippo | NULL |
| 3 | Rossi | NULL |
I want to creare a new empy table with the columns name contained into the column B of the first table; the following should my results:
tbtab2
| Pluto | Pippo | Rossi |
I need Insert rows in the OrderDetails Table based on values in the Orders Table
In the Orders table i have a columns called OrderID and ISale.
In the OrdersDetails i have columns called OrderID and SaleType
For each value in the OrderID Column of the Orders Table, anytime the ISale Column in the Orders table = 1, and the SalesType column in the OrderDetails table is empty, I want to add two rows in the OrderDetails table. One row with the value K and another row with the value KD.
That is a row will be added and the value in the SalesType column will be K, also a second row will be added and the value in the SalesType column will be KD
Also for each value in the OrderID Column of the Orders Table, anytime the ISale Column in the Orders table = 0, and the SalesType column in the OrderDetails table is empty, I want to add two rows in the OrderDetails table. One row with the value Q and another row with the value QD
That is a row will be added and the value in the SalesType column will be Q, also a second row will be added and the value in the SalesType column will be QD.
I need a SQL Script to accomplish this. thanks
I am writing a query to return some production data. Basically i need to insert either 1 or 2 rows into a Table variable based on a decision as to does the production part make 1 or 2 items ( The Raw data does not allow for this it comes from a look up in my database)
I can retrieve all the source data i need easily but when i come to insert it into the table variable i need to insert 1 record if its a single part or 2 records if its a twin part. I know could use a cursor but im sure there has to be an easier way !
Below is the code i have at the moment
declare @startdate as datetime
declare @enddate as datetime
declare @Line as Integer
DECLARE @count INT
set @startdate = '2015-01-01'
set @enddate = '2015-01-31'
[Code] .....
I want Compare two Table data and insert changed field to the third table ...
View 9 Replies View RelatedI have a report that I created and the report was working until I added some fields to a group footer row in a table.
My table has 5 group levels. I had information displaying in the 5th level header group and detail. It was working fine. Then I added some fields to the 4th level group footer. Now it displays only the Page header, Table header, and the 4th level group footer data.
What happened to the rest of the data?
All the cells and rows I want to display have the Visibility Hidden set to false. I tried removing the objects I added (to the 4th level group footer) and it still does not work. Is this a bug or did I set something that is hiding the data.
Thanks,
Fred
Select top 100 * from tab1 order by col1 ---gives me the top 100 order by col1
Select top 200 * from tab1 order by col1 ---gives me the top 200 order by col1
How do I select the top 100 to 200
I just created a new table with over 100 Columns and I need to populated just the first 2 columns.
The first columns to populate is an identify column that is the primary key. The second column is a foreign_key to an other column and I am trying to populate this columns with all the values from the foreign_key value. This is what I am trying to do.
column1 = ID
column2= P_CLIENT_D
SET IDENTITY_INSERT PIM1 ON
INSERT INTO PIM1 (P_CLIENT_ID)
SELECT
Client.ID
FROMP_Client
So I am trying to insert both an identity values and a value from an other table while leaving the other columns blank. How do I go about doing this.
Hi,i m using sqlexpress 2005 and sql management express studio. I want to know how could i insert multiple records on a single query in a table?i also want to whats wrong with this insert query?DROP TABLE IF EXISTS `tblcountry`;CREATE TABLE `tblcountry` ( `ID` int(3) NOT NULL auto_increment, `LCID` int(4) unsigned default '0', `CountryCode` char(2) default NULL, `Country` varchar(50) default NULL, `CountryInt` varchar(50) default NULL, `Language` varchar(50) default NULL, `Standard` tinyint(1) unsigned default '0', `Active` tinyint(1) unsigned default '0', PRIMARY KEY (`ID`)) ENGINE=MyISAM AUTO_INCREMENT=4 DEFAULT CHARSET=latin1 ROW_FORMAT=DYNAMIC;INSERT INTO `tblcountry` (`ID`,`LCID`,`CountryCode`,`Country`,`CountryInt`,`Language`,`Standard`,`Active`) VALUES (1,1030,'DK','Danmark','Denmark','Dansk',0,1), (2,2057,'GB','England','England','English',1,1), (3,1031,'DE','Deutschland','Germany','Deutsch',0,1);finally how could i extract the database structure and data from the sql express management studio?so that i can copy it and re use it some other computer.Thanks.Jack.
View 7 Replies View RelatedI am trying to insert multiple rows into a table getting data from a web form.
I have 2 fields being passed from a web form to the below stored procedure
@FormBidlistID Sample Data --> 500
@CheckBoxListContractors Sample Data --> 124,125,145,154,156,
The below DELETE function is working great. However for some reason or another the INSERT INTO sql command is not putting seperating the string and adding rows to the database? I am not sure where the error is occuring.
In the end I need the data to go into the database columns like so
Table: BidlistContractors (2 Columns: BidlistID, ContractorID)
BidlistID ContractorID
500 124
500 125
500 145
500 154
500 156
Stored Procedure Code:
CREATE PROCEDURE dbo.UpdateBidlistContractors
@FormBidlistID int,
@CheckBoxListContractors varchar(3999)
AS
DELETE FROM BidlistContractors
WHERE BidlistID = @FormBidlistID
DECLARE @ContractorID nvarchar(10)
DECLARE @BidlistID nvarchar(10)
DECLARE @startPosition int
DECLARE @commaPosition int
SET @startPosition =1
SET @commaPosition = 0
WHILE (@startPosition < LEN(@ContractorID))
BEGIN
SET @commaPosition = CHARINDEX(' , ' , @ContractorID, @startPosition)
SET @ContractorID= SUBSTRING(@ContractorID, @startPosition, @commaPosition - @startPosition)
INSERT INTO BidlistContractors (BidlistID, ContractorID)
VALUES (@BidlistID, @ContractorID)
SET @startPosition = @startPosition + LEN(@ContractorID) + 1
END
GO
Where am I going wrong? Thank you in advance for any help.
:-)