SQL 2012 :: View Resolution Order
Jun 11, 2015
I'm just wondering what is the resolution or execution order for a query like this (simplified version):
CREATE VIEW ClosedSales AS
SELECT *
from NatSales
where CurrentFlag = 1
and ValidTo <> '9999-99-99'
Select * from ClosedSales
where CustomerId = 10
The thing I want to know is:
- If first the complete dataset from the view is calculated and the the CustomerId=10 filter is applied
- Or the CustomerId=10 condition is added to the where clause in the view definition
My real case is much more complex but that is an interesting point in my performance analysis.
View 2 Replies
ADVERTISEMENT
Aug 8, 2007
i created a query and when i run it like this i get data but when i add a value in the 2ed case for '2%' i get error.
Select a.email, case when a.reportnumber like '1%' then (select b.Reportnumber from ijasSummaryNo b where a.Reportnumber = b.Reportnumber) end as Reportnumber, case when a.Reportnumber like '1%' then (select b.stonebreakdown from ijasSummaryNo b where a.Reportnumber = b.Reportnumber) end as Measurement, case when a.Reportnumber like '1%' then (select b.reportcarddate from ijasSummaryNo b where a.Reportnumber = b.Reportnumber) end as ijasDate,
case when a.reportnumber like '2%' then (select c.Reportnumber from appraisalsummaryblue c where a.reportnumber = c.reportnumber) end as imacsRepNo
from t_RegisterInfoTemp a
Query works fine like this but when i add this (the one marked bold i get error)
case when a.reportnumber like '2%' then (select c.Reportnumber from appraisalsummaryblue c where a.reportnumber = c.reportnumber) end as imacsRepNo,case when a.reportnumber like '2%' then (select c.Measurement from appraisalsummaryblue c where a.reportnumber = c.reportnumber) end as Measurement2
This is the error.
Server: Msg 4414, Level 16, State 1, Line 1Could not allocate ancillary table for view or function resolution. The maximum number of tables in a query (260) was exceeded.
View 4 Replies
View Related
May 18, 2006
I have created view by jaoining two table and have order by clause.
The sql generated is as follows
SELECT TOP (100) PERCENT dbo.UWYearDetail.*, dbo.UWYearGroup.*
FROM dbo.UWYearDetail INNER JOIN
dbo.UWYearGroup ON dbo.UWYearDetail.UWYearGroupId = dbo.UWYearGroup.UWYearGroupId
ORDER BY dbo.UWYearDetail.PlanVersionId, dbo.UWYearGroup.UWFinancialPlanSegmentId, dbo.UWYearGroup.UWYear, dbo.UWYearGroup.MandDFlag,
dbo.UWYearGroup.EarningsMethod, dbo.UWYearGroup.EffectiveMonth
If I run sql the results are displayed in proper order but the view only order by first item in order by clause.
Has somebody experience same thing? How to fix this issue?
Thanks,
View 16 Replies
View Related
Jan 14, 2008
I have a view in SQL SERVER 2005 which includes ORDER BY in my SQL expression.
When I press "execute", the results of the view come out ordered by the selected field, as they should be.
When I close the view and choose "Open View", the results come out not ordered. The same thing happens when I'm trying to show the results in a GridView.
Why does it happen?
View 2 Replies
View Related
Feb 7, 2006
I have to provide the Order by Value from Front End (VB) to the DB , so that I can receive the Crystal Report in the order that I have given.
thanks in advance... :confused:
View 5 Replies
View Related
Feb 21, 2006
In MSSql,"Order by" and "distinct" can be used in view?
thanks!
View 4 Replies
View Related
Feb 6, 2004
i m required to use order by in a view, how to do it, simple order by doesn't work for it, any other way,i have heard there is one in oracle, but wat abt SQL Server???:confused:
View 2 Replies
View Related
Jan 11, 2007
I have make a view where i have a order by
when i execute my view in modify my result are allright
but when i say open view to see my view it is not
in order by.
I use the view in a asp site to the internet and i can't use order by here
because the field i orderby shall not come up in my site, i only use this field
to order by
Hope someone can help
Alvin
View 9 Replies
View Related
Apr 29, 2006
I have downloaded and installed SQL Server Express 2003 Adv.. I have created a new database in it and also a table called Customers. In that I have created one field called CustomerName as nvar(255). I have made 10 records by filling in the field with various names. I have then created a new view and asked it to order the records in descending order. When I save and show the view it shows the records still in the order that I inserted them not in descending alphabetical order. If I make it show in ascending order the same problem still occurs. Collation settings are correct for the computer at Latin1. However, I have tried a few others, but none make any difference. SQL Server Express 2003's view will not list my Customers in either ascending or decending alphabetical order. Can anyone give me any suggestions?
View 4 Replies
View Related
Jan 24, 2006
I have the view below and if I use vwRouteReference as the rowsourcefor a combo box in an MS Access form or run "SELECT * FROMvwRouteReference" in SQL Query Analyzer, the rows don't come throughsorted by Numb.Everything I've read on the web suggests that including the TOPdirective should enable ORDERY BY in views. Does someone have an ideawhy the sorting is not working correctly for this particular view? thanks.CREATE VIEW vwRouteReferenceASSELECT TOP 100 PERCENT tblItem.ID,tblItem.Numb + ' - ' + tblQuestion.DescrPrimary AS FullName,tblItem.Numb, tblQuestion.DescrPrimary AS TypeFROM tblItem INNER JOIN tblQuestionON (tblItem.ID = tblQuestion.Item_ID)WHERE (((tblItem.Category_ID)>0))UNIONSELECT TOP 100 PERCENT tblItem.ID,tblItem.Numb + ' - ' + tblItem.Type + ' : ' + tblItem.Class AS FullName,tblItem.Numb, tblItem.Type + ' : ' + tblItem.Class AS TypeFROM tblItemWHERE (((tblItem.Type) = 'Assignment' OR (tblItem.Type) = 'Check' OR(tblItem.Type) = 'Route'))ORDER BY tblItem.Numb
View 49 Replies
View Related
Dec 15, 2006
When I create a view in SQL and include an ORDER BY clause i can see itin Management Studio. However, when I call the same view from an ASPpage the order goes completely haywire.Any ideas?
View 24 Replies
View Related
Sep 21, 2007
Hi,
I have created a view which uses 3 tables, i also have a sort on one of the columns. However when I open the view the sort does not work. It does however sort the view correctly when executing the query within design view
Can anyone explain this or is it a bug within SQL Server Express 2005?
thanks
David
View 1 Replies
View Related
May 22, 2006
Hello,
I am trying to create a simple view which uses self joins. I want the final result order by. I am able to create the view using Top clause followed by order by but when I simply query the view it does not appear in the correct order. Can some body help me with the issue.
CREATE VIEW [dbo].[vw_SalesRep_Chaining]
AS
SELECT Top 100 percent Rep_id AS RepId,
Rep_cd AS RepCode,
Region as Region,
CASE WHEN Market IN ('Arizona - North', 'Arizona - South', 'Gtr TX / New Mexico') THEN 'Arizona / New Mexico'
WHEN Market IN ('L.A. Metro - West', 'L.A. Metro - North', 'L.A. Metro - East') THEN 'LA Metro'
WHEN Region = 'Western' AND Market NOT IN ('Arizona - North', 'Arizona - South', 'Gtr TX / New Mexico', 'L.A. Metro - West', 'L.A. Metro - North', 'L.A. Metro - East') THEN 'Western - Other'
ELSE '' END AS Sub_Region,
RSM AS RSM,
UPPER(Regional_Manager) AS Regional_Manager,
Market,
Rep_Manager_id AS SalesManager,
UPPER(MarketManager) AS MarketManager,
New_Position AS NewPosition,
Rep_Status AS RepStatus,
UPPER(Rep_Payroll_name) AS PayrollName
FROM (SELECT SalesRep_GUID, Rep_id, Rep_cd, Rep_Payroll_name, Rep_SSN, Rep_Status, Hire_dt, Termination_dt, Commission_start_dt,
Rep_Manager_id, Region, Market, New_Position, Validity_start_dt, Validity_end_dt, Load_interval_id, Create_process_id, current_ind
FROM dbo.SalesRep
WHERE (current_ind = 1) AND (New_Position IN ('SC1', 'SC2', 'SC3', 'MSO')) AND (Region NOT IN ('Emerging Market')) OR
(current_ind = 1) AND (New_Position IS NULL) AND (Region IN ('TeleSales')) AND (Region NOT IN ('Emerging Market'))) AS A
INNER JOIN (SELECT Rep_id RepId, Rep_Payroll_name as MarketManager, Rep_Manager_id as RSM
FROM dbo.SalesRep AS SalesRep_2
WHERE (current_ind = 1)) AS B
ON A.Rep_Manager_id = B.Repid
INNER JOIN (SELECT Rep_id RepId1, Rep_Payroll_name as Regional_Manager FROM dbo.SalesRep AS SalesRep_1
WHERE (current_ind = 1)) AS C
ON B.RSM = C.Repid1
WHERE (A.Region IS NOT NULL)
Order by Rep_Id, Rep_Cd
This is the script I have used to create the view. But when is simply query the view it does not appear in the order of Rep_Id, Rep_Cd
View 1 Replies
View Related
Sep 22, 2006
Hi there,
I have a view created using the following code. The view works perfectly but does not order by the name column as I've asked it to do. In the view designer if I click on execute then the order is applied but if I save the view and run it externally (i.e. in an ASP page or within the management terminal) it does not order correctly and seems to order by the Id column.
Any help would be much appreciated. Here's the code:
SELECT TOP (100) PERCENT dbo.Members.DivisionID, COUNT(*) AS Members, dbo.Country.Name
FROM dbo.Members INNER JOIN
dbo.Country ON dbo.Members.DivisionID = dbo.Country.CountryID AND dbo.Members.CountryID = dbo.Country.CountryID
GROUP BY dbo.Members.DivisionID, dbo.Country.Name
ORDER BY dbo.Country.Name
And another, more simpler view, that doesn't sort as it's supposed to.
SELECT TOP (100) PERCENT CountryID, Name, RegionID, IsActive, HasFlag, URL, Comments
FROM dbo.Country
ORDER BY Name
Many thanks,
Ady
View 5 Replies
View Related
Feb 11, 2006
Hi,
I've a problem with a created view in sqlserver2000 that I'm now using in sqlserver2005.
This is the view :
CREATE VIEW hsarti01_VD1 AS
SELECT TOP 100 PERCENT *
FROM hsarti01 WITH(index(hsarti01_PK))
ORDER BY 1,2 desc,3,4
When I do the "select * from hsarti01_VD1" in sql server 2000, I see in the result that the order by is been using. but in sql server 2005 it's just using the order of the primary key and not the order by !
Has anyone have a solution for it ?
Thanks
View 16 Replies
View Related
May 27, 2008
I built a view that runs against the aspnet_WebEvent_Events table, part of the ASP.Net Health Monitoring.
Here is the view SQL:
SELECT TOP (100) PERCENT EventTime, EventType, EventSequence, EventOccurrence, EventCode, EventDetailCode, Message, ApplicationPath,
ApplicationVirtualPath, MachineName, RequestUrl, ExceptionType, Details
FROM dbo.aspnet_WebEvent_Events
ORDER BY EventTime DESC
What I found is that when the query is ran within the View Designer that the view is ordered by the correct EventTime (datetime) field.
But when the view is ran from right-clicking on the view and selecting "Open View" the order by does not take place.
Why is this happening and how do I fix it?
View 1 Replies
View Related
Dec 13, 2005
This works fine in SQL 2000, but not in SQL 2005
View 12 Replies
View Related
May 26, 2008
Hi,
I have few views in SQL Server 2005. In Design View, the results of View are ok. In OPEN VIEW option, records are not sorted correctly, ORDER BY is ignored.
What could be the reason for this ?
Thanks a lot in advance!
View 6 Replies
View Related
Apr 8, 2008
help with solution for use order BY inside function and VIEW on the sql server
i explain the problem
i am a web developer in asp page
i BUY an DATA grid object for my web site
the problem in this object i can use only ONE field to use ORDER BY
can i store in the sql server function and VIEW that change the ORDER of the result inside the sql server ?
so whan i do
SELECT *
FROM dbo.tb_pivot_big
the sql server ORDER for ME the result and run this (inside the sql server )
Code Snippet
SELECT *
FROM dbo.tb_pivot_big
ORDER BY new_unit, Fname ASC, val_orginal desc
TNX for help
View 14 Replies
View Related
Aug 24, 2006
I have a table:
CREATE TABLE [dbo].[tx1]( [f1] [nvarchar](50) , [seq] [int] IDENTITY(1000,1) NOT NULL ) ON [PRIMARY]
SELECT *
FROM dbo.tx1
ORDER BY seq DESC
go
f1 seq
zz 1003
uu 1002
kk 1001
yy 1000
create view vx1 as
SELECT top 100 percent *
FROM dbo.tx1
ORDER BY seq DESC
go
select * from vx1
yy 1000
kk 1001
uu 1002
zz 1003
View 7 Replies
View Related
Jan 20, 2015
We are having trouble figuring out how to create a view for this scenario:
We have a status log table that holds an order number, statusdatetime, and statuscode. This table will have multiple status' for the same order number. I want to create a view that will give me the most current status (by statusdatetime) of each order number. This view would show: order number, statusdatetime, and statuscode.
Here is a sample of the data:
Order numberStatusDateTimeStatusCode
1234512/15/2014 15:00CREATE
1234512/15/2014 16:30CONFIRMED
4567812/16/2014 08:00CREATE
9876412/18/2014 12:00CREATE
9876412/19/2014 08:00CONFIRMED
4567812/17/2014 09:30CONFIRMED
4567812/19/2014 15:30IN-TRANSIT
So my view should result in :
Order numberStatusDateTimeStatusCode
1234512/15/2014 16:30CONFIRMED
9876412/19/2014 08:00CONFIRMED
4567812/19/2014 15:30IN-TRANSIT
View 4 Replies
View Related
Mar 10, 2014
If I have multiple servers in my AG group and set two of the secondaries to synchronous with auto failover, how do I control which one one of the two secondaries will become primary if the original primary goes down?We need to maintain HA even during patching so need a first choice auto failover and a second choice auto failover.
View 9 Replies
View Related
Jul 15, 2014
I have a stored procedure that I would like to order by the order of the parameters it takes in starting for current item number 1, prior item number 1, current item number 2, prior item number 2, and so on.
currently I am ordering it by:
c.CurrentItemNumber
, p.PriorItemNumber
among other fields, but I would like to replace the part above with the parameters 1 through 5 (current and prior).
Is this possible?
This is my stored procedure for reference:
ALTER PROCEDURE [cost].[Ingredient_Cost_Comparison]
(
@CurrentSalesQuoteNumberNVARCHAR(20)
,@PriorSalesQuoteNumberNVARCHAR(20)
,@CurrentItemNumber1NVARCHAR(20)
,@PriorItemNumber1NVARCHAR(20)
,@CurrentItemNumber2NVARCHAR(20)
[Code] ....
View 5 Replies
View Related
Dec 2, 2014
I want to run multiple SQL script files from a directory in a particular order. I want to read file names from a text file and run / execute SQL files accordingly. Can I achieve my goal using a batch file?
View 2 Replies
View Related
Apr 3, 2013
Is there a way to change the order that "select * from #table" returns data? It doesn't appear to return data in the same order that it was inserted into the table. This wasn't a problem with the same code in SQL Server 2005.
View 5 Replies
View Related
May 20, 2014
There are about 300 fields in a views.
How to reorder all fields by alphabet?
For example, from script of views like below:
select name, date, amount from order
re-order fields' name like below:
select amount, date, name from order
For about 300 fields view, how to code to re-order fields' name?
View 6 Replies
View Related
Sep 11, 2014
I have a simple example of what I am trying to do. Here is some code to make a quick table to demonstrate:
create table #students
(
lastname varchar(50)
,firstname varchar(50)
,address1 varchar(50)
[Code].....
I want to select all the records, and them them be in alphabetical order first by lastname, then by firstname, then by address. HOWEVER, and this is the tricky part, I want to group names together that have the same address. So, in this example, I want the results to be in this order:
HallC6309 N Olive
HallP6309 N Olive <---- grouped with the C record because they have the same address
HallE5488 W Catalina <---- back to alphabetical by first name
HallJ7222 N Cocopas
View 7 Replies
View Related
Nov 27, 2014
I have a requirement to present computed sales order status value
Parent table : consumer
Child table of consumer : sales order
Child table of sales order: items
Items table has status column with awaiting, accepted , rejected.
Status of the sales order should be set as following
If all items are rejected then sales order status=reject
Or if at least one item is accepted then sales order status = accept
Or if items status is awaiting then sales order status = pend
Query to find all sales order per consumer with computed order status for each sales order.
View 2 Replies
View Related
May 13, 2015
I am relatively new to complex queries and need creating a query using a CASE in order to update columns to be either A or B. A few things about this is that I am joining tables from linked servers as well. This is the last part. I execute the query and receive the error:
Incorrect syntax near the keyword 'from'.
select (select FirstName from [ZZZXXX].HCM.dbo.tPerson where PersonGUID = tPersonJobHistAlias.SupervisorPersonGUID) as supervisorFirstName,
(select LastName from [ZZZXXX].HCM.dbo.tPerson where PersonGUID = tPersonJobHistAlias.SupervisorPersonGUID) as supervisorLastName,
(select PersonID from [ZZZXXX].HCM.dbo.tPerson where PersonGUID = tPersonJobHistAlias.SupervisorPersonGUID) as SupervisorEmployeeID,
[Code] .....
View 4 Replies
View Related
Sep 9, 2015
I'm trying to set up a statement that gives me a field called 'BINNO' if the payor = Commercial. But, I have a few customers that don't have Commercial. They have a Payor of Grant or Part D. How would I set up a statement that looks for Commerical 1st...then Grant or Part D. I started with this
case when inscomp.payor = 'COMMERCIAL' then INSCOMP.BINNO
View 9 Replies
View Related
Sep 10, 2015
Probably not the best "Subject Title", but no the less what I am looking for is a way to get the order in which I should insert data into a table that has 10 FK's to it. I have queries that list them out for me, but they do that in what seems to be alphabetical order. You can also right click the table in question and select view dependencies, but that as well appears to be in alphabetical order.
Is there any query or any way to see what order I should be inserting and/or deleting data into FK tables?
View 0 Replies
View Related
Dec 20, 1999
In 7.0, an application development change has been made to defer name checking in
stored procedures until exection time. This allows a clean store of the proc in the system catalog
regardless of objects existing or not. At execution time, the proc is compiled, and object resolution is
done. Problem - the procedure fails if object names, column names, etc are wrong or don't exist.
So, during nightly cycle's the procedures bomb out.
Is there anyway to disable this 'deferred name resolution', or am I at the mercy of the developers?
Can I make the resolution immediate?
Thanks!
Dean
View 1 Replies
View Related
Aug 26, 2006
Friends
I have one SQL server2000 which have Mixed Mode authentication.It is working fine in PC which server instance is situating.But I have another PC which having connectvity tools of SQL Server.When I am trying to access SQL Server from the second PC through SQL authentication access getting denied.In the same time if I am accessing any of first PC's Folder using it's administrator password.Then if try with SQL authentication I am able to connect with SQL Server in the First PC from second PC .Please note SQL server instance is not in windows authentication mode .What may be the problem.Please suggest me a resolution
Thanks in Advance
Filson
View 1 Replies
View Related
