SQL 2012 :: WSFC Service Not Started In Second Node
Oct 21, 2015
I have configured Alwayson HA setup as following environment and versions, and working fine to client side by connected with AG Listener.
Two Node WSFC setup. Node1 (Primary), Node 2(Secondary Replica). Normal quorum(Not shared disk)
Server Platform: HyperV
OS: Windows server 2008 R2 64 bit with SP1
RDBMS: MS SQLSERVER 2012 64 bit with SP2
when I am doing testing Failover method between two nodes. automatic failover not happened.
Just shutdown Node1 and try to connect at client side by using AG Listener name but not succeeded, also Cluster name and AG Listener name are not pinging, Second node2 cluster service is not started by automatically due to as below errors. So how will connect client and overcome this issues? Any modification need to be done on both side WSFC and AlwaysOn SQL? for achieving and automatic failover.
Cluster network 'Cluster Network 1' is partitioned. Some attached failover cluster nodes cannot communicate with each other over the network. The failover cluster was not able to determine the location of the failure. Run the Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapter. Also check for failures in any other network components to which the node is connected such as hubs, switches, or bridges.
Client side got connected once Node1 get started again also cluster services started.
View 1 Replies
ADVERTISEMENT
Feb 10, 2015
We are running SQL Server 2012 Enterprise on Windows 2012 R2. We have set up A WSFC with the primary Node in our East Coast Data Center and the Secondary Node in our West Coast Data Center each node is in a dfferent subnet. Since we have high latency between the sites we run in Asynchronous mode with manual failover only. My quesion concerns Quorum, everything I read would indicate we need a third node (odd number) (e.g. a fileshare Witness) with only the file share and the primary node having a vote...What I don't see is any need for a file share if we can only do manual failover.
View 7 Replies
View Related
Apr 20, 2015
I have not used log shipping before and find myself in a position where I need to reboot the secondary node and then the primary node and I don't actually need to failover.
Is there anything I need to be aware of. When rebooting the secondary node I assume the transactions will be held in the primary nodes log till the secondary comes back and just carry on once back up?
When rebooting the primary node nothing needs to be done and the log shipping will just start again once it has come back?
View 3 Replies
View Related
Oct 23, 2014
I'm contemplating running two availability groups on a two node WSFC. The WSFC is setup with a file share witness (i.e. no shared storage). Can I safely run 1 AG on one primary node, and the other AG on the other node (as primary). Each AG would have replicas on the passive node. This would effectively allow both servers to be in use at the same time. In a failover event, I understand that both workloads would transfer to a single server - so the box needs to be sized appropriately.
View 1 Replies
View Related
Jun 11, 2015
We are in the process of building a 3 node SQL Server Cluster (Server 2012/ SQL Server 2012), and we have configured the quorum so that all 3 nodes have a vote (no file share witness as we already have an odd number of nodes).
As I understand it, this should allow the cluster to run as long as 2 of the nodes remain online.
However, the validation report states that 2 node failures would be acceptable and, when we tested this by powering off two of the nodes, the cluster did indeed continue to run on a single node.
View 4 Replies
View Related
Sep 10, 2007
How to prevent the hang on the initator service broker if the target service broker is not started?
Our case has two service brokers (two databases), sometime, the target is need to turn off. But the sitation is the initator service broker (in fact, the message is sent from triggers) become hang, I want to prevent this case and continue to operation, and the messages should queue and will continue to send to target service broker when it startup. How should I do?
View 3 Replies
View Related
May 30, 2008
Sql server service has been started with a normal user who do not have any permission but he is a domain user.
The sql server service can be started successfuly in cluster
But if the Same user is used to start the SQL Server Agent service there is an error.What is the mininumum priviledge to
start a sql server agent in cluster. Why it cannot the domain user cannot be used to start the sql agent service.
View 1 Replies
View Related
Jul 12, 2006
I have installed SQL Server 2005 Standard Edition for our Team Foundation Server install. I have verified the installation and all seems well, except that the Analysis Services service does not remain started. I get a message like "Some services stop if there is nothing to do." The Analysis service needs to be running in order for the TFS install to succeed. How can I get the Analysis Services service to remain started?
Thanks in Advance
View 7 Replies
View Related
Mar 9, 2008
Hi,
My SQLEXPRESS service suddenly gives me this error.
ERROR: The SQL Server(SQLEXPRESS) service on Local Computer started and then stopped. Some services stop automatically if they have no work to do, for example, the Performance Logs and Alerts service.
My OS is Microsoft Windows Server 2003, Enterprise Edition, SP2.
It all started when I restarted the system prompted by the Windows updates.
Please help. Its urgent as this is one of the important servers to be managed.
Thanks and Regards
Madhu
View 3 Replies
View Related
Jul 27, 2001
I'm not sure i was clear the first time. When the MSSQLServer Service is stopped and started, it stops the SQLServerAgent Service also. But when the MSSQLServer Service is started, it DOES NOT start the SQLServerAgent Service. I don't think this is configurable, so I was wondering if someone had a workaround (.bat file, service dependency, etc.).
TIA,
Mike
View 1 Replies
View Related
Apr 13, 2006
Hi everybody
Error [364] The Messenger service has not been started - NetSend notifications wi
I am having this error from agent. Does anybody have any idea what this error means or is it sevear or not?
Thank you
asa.:)
View 3 Replies
View Related
Apr 4, 2008
Hi,
I am trying to set up a SQL 2005 analysis server cluster in our two servers, AS02 and AS04. The server cluster is built up on Majority Node Set (MNS). During the installation of the analysis service, I don't see the available cluster groups. In the cluster admin, the cluster is up and running fine. The MNS cluster has no shared disk, and it has two nodes.
Any thoughts or suggestions? or is it possible to built the SQL 2005 analysis service cluster with MNS?
Thanks.
View 4 Replies
View Related
May 16, 2014
I have a table which has a field with a data type of Xml. A sample record might contain something like this:
<?xml version="1.0" encoding="utf-16"?>
<order>
<Product Index="14c9643f-63d9-40c5" ProductID="13" Name="............>
<Attribute Name="Paper" OptCatId="1" Value="72" ....../>
<Attribute Name="Ink" OptCatId="2" Value="6" ......../>
<Attribute Name="Bleed" OptCatId="3" Value="15" ......./>
<Attribute Name="Number of Drops" OptCatId="0" Value="1" ...../>
I need to grab the Node/Attribute with the name of "Number of Drops" and get the value of "Value". So in this case, I simply want to get "1". How could I do this?
SELECT "value of Number of Drops"
FROM myTable
WHERE ID = ....
View 1 Replies
View Related
Apr 28, 2014
I have an A & B node set up and running. I now want to add a C NODE.
The catch is the C NODE is in a SQL Cluster Environment.
I am guessing I add the Virtual Name of the C node to the current Always ON Cluster?
I tried adding it...the error message says" the Virtual Node is really the A node and to add the A NODE"?
View 6 Replies
View Related
Oct 3, 2015
Can I add a new node to an existing sql server 2012 cluster witthout stopping all the current resources?
Currently, there are 2 nodes and 3 sql server instances, which can not be shutdown. Is the process of adding nodes a "online" process?
View 1 Replies
View Related
Nov 21, 2013
I have the following code and trouble reading values of Bank Accounts. If i remove the line it says "xmlns="http://applications.apch1.com/webservice/schema/" then i my query is working. But i cant remove this becasue that is what i will get response from a web service. All the records are stored in the database with this line included.
DECLARE @MyXML XML
SET @MyXML = '<GetEmployeeDetails xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<return xmlns="http://applications.apch1.com/webservice/schema/">
<CustomerID> A8339 </CustomerID>
<BankAccounts>
[Code] .....
View 2 Replies
View Related
Sep 8, 2014
I have installed SQL Server 2012 on Node1 successfully and trying add node on Node2 and its failing with below message. I attached the screen shot.
Here we are not doing multi-subnet failover clustering. Why we are getting extra and asking for IP and what IP should we enter there?Add Node option should automatically detect the IP we configured on Node1.
[Error Message] To support SQL Server multi-subnet failover clustering, you must select at least one valid IP address for every subnet in the cluster.
[Details] Microsoft.SqlServer.Configuration.Cluster.ClusterIPAddressPublicValidationException: To support SQL Server multi-subnet failover clustering, you must select at least one valid IP address for every subnet in the cluster.
View 1 Replies
View Related
Dec 4, 2014
I am trying to extract what I believe is called a Node from a column in a table that contains XML. What's the best way to do this? It is pretty straightforward since I'm not even looking to include a WHERE clause.
What I have so far is:
SELECT CCH.OrderID, CCH.CCXML.query('/cc/auth')
FROM tblCCH AS CCH
View 3 Replies
View Related
Mar 6, 2015
During the installation of the SSISDB in SQL 2012 AG, the password used to encrypt the database was not preserved. Now when the server is failed over, the SSISDB on the new primary node is not use-able.Document the password and decrypt after using the master key after failover.
View 5 Replies
View Related
Jul 14, 2015
What I have- Sql server 2012 (Standard Ed) Cluster on Windows 2012 R2 with both instances running on the same node- just to save on License, i.e. technically it’s Act/Pas cluster.
What I am looking for- how to configure cluster (e.g. via quorum, etc) to force both instances failed together? Means if for some reason 1-st instance will fail to node 2 another instance should follow (otherwise it will be Act/Act cluster and 2-nd license is required).
If there is no standard way (cluster configuration I mean) to do it I should create some custom process to monitor where each instance is running.
View 3 Replies
View Related
Nov 4, 2015
Our network guys have to carry out an IBM Flex Chassis move at our data centre, which will affect the primary replica of one of our SQL 2012 AlwaysOn Availability Group nodes (the secondary replica won't be affected).
They have suggested using vMotion to migrate the primary replica to another virtual host, which will result in a very brief period of network outage for the node.
I've done some reading and have seen a few potential issues regarding Stun During Page Send (SDPS) and increasing thresholds within WSFC. Unfortunately, we're not able to test this prior to the migration, so I have a few questions...
Would it be necessary to failover to the secondary replica node before performing the vMotion (and back again afterwards)?
View 0 Replies
View Related
Apr 28, 2015
I know that AlwaysOn creates a WSFC role in order to provide failover of the Availability Group Listener. But does it also "honor" the WSFC network setttings? What I'd like to do is isolate the client-side traffic from the database replication traffic. But it's not clear to me that AlwaysOn even uses that part of WSFC.
a) Can you totally isolate the traffic as I've described?
b) Does AlwaysON actually use WSFC network settings? If yes, then I guess I cannot do what I want, since my choices are Cluster & Client, or Cluster Only.
View 3 Replies
View Related
Apr 30, 2014
How do I reliably symmetrically encrypt a single node in an XML field in my SQL Server 2012 database? I know I cannot use SQL Server encryption to encrypt an XML field and I have been getting unpredictable results with a home grown solution.
View 9 Replies
View Related
Oct 3, 2014
I have a SP that runs on the primary in 18 min and 45 min on the secondary( poorly written cursor,trying to fix it).Both machines are Exactly the same.I ran them in the middle of the night when no one was on the Sec. Node as we use it for reporting.
PLE: 7,000+
AVG Disk sec/write below .01
AVG Disk sec/read below .01
CPU below 5%
both machines set a max dop 4
View 2 Replies
View Related
May 3, 2015
Few questions on a SQL Server 2012 two node active/passive cluster installation on Win2012.
1. What are the permissions required for the user used to install SQL Server 2012 cluster. Does it need to have any rights on DC or anywhere else apart from the local nodes ?
2. Can we give ANY meaningful name to "SQL Server Network Name" during installation ? Do we need to manually configure it anywhere else before or after the installation ?
3. On what scenarios we need to check/uncheck DHCP check box ?
View 1 Replies
View Related
May 12, 2015
I have a tree and I need to copy a nested sub-tree (an element with its children, which in turn may have their owns) from one place to another.
The system should allow to handle up to 8 levels. I do know how to move, but cannot figure out how to copy.
Below is a working example With Create Table, Select and Cut / Paste (implemented via Update).
I would like to know how to copy a nested tree with reference id 4451 from Parent_Id 1 to Parent_Id = 2
--***** Table Definition With Insert Into to provide some basic data ****
IF (OBJECT_ID ('myRefTable', 'U') IS NOT NULL)
DROP TABLE myRefTable;
GO
CREATE TABLE myRefTable
(
Reference_Id INT DEFAULT 0 NOT NULL CONSTRAINT myRefTable_PK PRIMARY KEY,
[Code] ....
How to Copy nested sub-tree 4451 with all its children to Parent_Id 2, without deleting from Parent_Id = 1 ?
View 7 Replies
View Related
Jun 5, 2015
It is an active passive cluster which doesn’t allow any testing. All instances have to be failed over together, we aren’t allowed to just failover 1 even for testing purposes. Node 1 is the active node and we can failover to node 2 for 30 days free of charge but services have to then be failed back.
We need to run the cluster with node 1 as the primary node always and 2 just use for failover testing or for less than 30 day periods whilst performing cluster patch upgrades etc.
Now l am sure we could fail over 1 instances at a time for testing and diagnosing issues plus if add a new instance that's not production to get to the platform level as the rest of the instances this would avoid taking production down in the fail over process.
View 5 Replies
View Related
Jun 25, 2015
what is the command to uninstall sql node with skip validation in sql 2012 ?
View 1 Replies
View Related
Jun 6, 2014
When adding a node to a SQL Server 2012 Standard edition cluster, how I do I identify the location for SQL server shared components and the rest of the SQL Server installation binaries?
When adding a node to a SQL Server 2012 Standard edition cluster all the binaries went to the C: drive default location. We put those files on a different drive when installing the first node. What needs to be done so both nodes have the binaries on the same drives and folders?
View 3 Replies
View Related
Jan 19, 2015
We are rolling out the use of Availability Group listeners to our SQL Server 2012 Environment which has a 2 node multi-subnet cluster. The Primary is R/W and the Secondary is a non-readable node that would be manually failed over to in a DR scenario
I have set up the AGL and asked the sysadmins to create a DNS record in both subnets with fixed IP's.
The issue I have having is that when I ask the app developers to connect to the databases using the AGL it is totally random whether the AGL resolves to the Primary or DR node - as a result that are having problems getting their apps to connect.
I was thinking of asking the sys admins to remove the DNS record in the DR subnet and then add it back in should we need to fail over - but I was thinking there must be a better way.
View 3 Replies
View Related
Mar 27, 2015
y'day we faced situation one of the primary server went down and unable to failover the services to second node . by checking in logs we found
Cluster network 'Public' is partitioned. Some attached failover cluster nodes cannot communicate with each other over the network. The failover cluster was not able to determine the location of the failure. Run the Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapter. Also check for failures in any other network components to which the node is connected such as hubs, switches, or bridges.
View 7 Replies
View Related
May 12, 2015
Can we backup a DB from SQL Server 2012 (Ent. edition) two node cluster to a local disk ?. Is it possible ?
View 7 Replies
View Related
Aug 14, 2015
let me know apart from the following what else is required
2 for private network
2 for public network ......
1 for virtual server/windows cluster ip which is used to connect application
View 1 Replies
View Related
