I create a db by following code. Now I want to change name of FILEGROUP. How can I do it?
CREATE DATABASE MyDb
ON
PRIMARY ( NAME = MyDat,
FILENAME = 'c:datamydat.mdf'),
FILEGROUP MyGroup CONTAINS FILESTREAM( NAME = My,
FILENAME = 'c:datamy1')
[Code] .....
I create a db by following code. now i want to change name of FILEGROUP. how can i do it?
CREATE DATABASE MyDb
ON
PRIMARY ( NAME = MyDat,
FILENAME = 'c:datamydat.mdf'),
FILEGROUP MyGroup CONTAINS FILESTREAM( NAME = My,
[Code] .....
I must determine FILEGROUP on my DB in SQL Server. Because when i wants to retrieve files which is stored in db, it would be face with error about FILEGROUP.
View 1 Replies View Relatedi must determin FILEGROUP on my DB in SQL Server. because when i wants to retrieve files which is stored in db, it would be face with error about FILEGROUP.
View 1 Replies View Relatedi have a DB in SQL Server 2008. and i wants to store file in DB.
how can i create filestream for filegroup for a DB in SQL Server 2008.
Hello,I have been trying to figure out how to temporarily change the maxfilegroup size of a SQL 2000 database I "inherited" when our DBA quit.I just need some breathing room until I can figure out how to properlyarchive and remove some filegroups.Here is the scenario, my filegroup is set to 20. Each filegroup is setto grow to 4096.I currently have all 20 filegroups in use and filegroup number 20 ismore than 1/2 full.I have considered making the max size for each filegroup larger butbelieve this is treating the symptom not fixing the problem.I would RTFM if I knew how to ask the question in 5 words or less.I have plenty of room to grow in terms of disk space.In Query Analyzer I suspect I have to use an ALTER DATABASEIn Gui mode I suspect I have to right click on the database properties,filegoups,,,,In the past I have setup my databases with 1 filegroup and autoconfigured to grow as needed so this is new territory for me so pleasefeel free to dumb it down for a noob as I need baby steps.
View 2 Replies View RelatedHi There
I am running SQL Server 2005 Enterprise Edition, i want to split my data and indexes on different drives.
In 2000 i had to recreate clustered indexes and non clustered indexes on the correct filegroups to accomplish this.
In 2005 i see there is a ALTER TABLE MOVE TO Filegroup option, thats cool.
Does this effectively do the same as rebuilding the clustered index on the new filegroup? Will this leave the other indexes of the table on the primay filegroup or move them as well ?
If i wanted to also move the non clustered indexes is there a better way to move them that drop and re-create on the new filegroup in 2005, i see the ALTER INDEX statement does not support a move to filegroup option.
In a nutshell what is the best/easiest way to move exisitng table data and indexes to new file groups in Sql Server 2005 Enterprise Edition?
Thanx
I've create a partition function and a partion scheme for my database.
Now I would like to change an existing table to use these partition.
The table is replicated.
How can I do this?
Thanks
Markus
I installed sql server 2012 on windows2012R2 when I creat a new filegroup and try to change like a default give me this message error:
cannot change the properties of empty filegroup the filegroup must contain at least one file (Microsoft sql server, error:5050)
My intention is to make a copy of a database with some data excluded. One way to do this:
- Make a copy-only backup of the source database
- Restore the backup as a new database
- Delete undesired data from the new database
In my case, the source database has two file groups, primary and secondary. The secondary has just one table with huge amount of data and this file group appears as one physical file. Is there any way to make a partial backup, which does not include this file group or table, and it would still be possible to restore the backup to a new database? My point is to avoid copying huge amount of data if it won't be needed.
How to add some more ranges to existing partition schema and function?
Already My table partitioned on date ranges,
6 partitions , each partition contains 6 moths data, so total data is 3 years.
i.e. 1 partition data- from jan2012 to Jun2012
2 partition data- from july2012 to dec2012
3 partition data- from jan2013 to Jun2013
4 partition data- from july2013 to dec2013
5 partition data- from jan2014 to Jun2014
6 partition data- from july2014 to dec2014
After Jan2015 data will go to Primary file group(Default)
Now customer wants to add two more file groups with these partitions ranges, i.e. jan2015 to jun15 and Jul15 to dec15.
File group and ndf file adding is OK, But
how to alter partition scheme and partition function with these additional ranges to existing partition function and scheme?
partitioned table size is 200 GB.
Trying to determine what the minimum permissions i can grant to a user so they can see the change tracking data
View 1 Replies View RelatedI would like to get extract the first row of some time based data where any of the other values changes. For example, in the following 10 rows
ABDTE
112015-01-01
112015-01-02
112015-01-03
212015-01-04
112015-01-05
1NULL2015-01-06
1NULL2015-01-07
212015-01-08
212015-01-09
222015-01-10
I want to remove the rows where A and B are the same as on the previous row. So rows 2, 3, 7 and 9 should be eliminated. Note that A and B can have the same values multiple times, just not in succession in the extract. I've tried ranking but I can't figure out how to keep it from lumping all the values of A and B in the same group. The following incorrectly eliminates rows 5 and 8:
;with data as (
select 1 as A, 1 as B, '2015-01-01' as DTE union
select 1 as A, 1 as B, '2015-01-02' as DTE union
select 1 as A, 1 as B, '2015-01-03' as DTE union
select 2 as A, 1 as B, '2015-01-04' as DTE union
[Code] .....
Of course the real data has many columns and multiple data types that can have nulls. I just want get the row when anything changes. Is there a slick way to do this in SQL?
I am looking at the file / filegroup level backup and recovery options within SQL Server and I'm struggling with the following concept.
Books online assures me that it is possible to perform a file restore whilst the database is in the simple recovery model.
So I have set up a database with two separate file groups, a read/write primary and a read only "secondary". Each filegroup has 2 underlying data files.
I have then created a "live" customers tables within the primary filegroup and assigned my existing "archive" customers tables within the secondary filegroup.
If I try to perform a file or filegroup level backup within management studio, those options are greyed out. I can only perform a database backup.
If I switch back to the full recovery model, the options are no longer greyed out.
So my question is this, is file level backup and recovery actually supported in the simple user model, do you have to perform this task outside of management studio, or (as is likely) am I missing something crucial?
What issues will I encounter if I change the MSSQLSERVER password?
View 2 Replies View RelatedI like to backup the stored procedures' code used in my databases. So I created this Script:
/*
IF OBJECT_ID('[Monitor].[dbo].[Procedurecode]') IS NOT NULL DROP TABLE [Monitor].[dbo].[Procedurecode];
*/
DECLARE
@db nvarchar(50),
@strSQL nvarchar (100)
IF CURSOR_STATUS('global','cur1')>=-1 BEGIN DEALLOCATE cur1 END
[code]....
Problem is (and I seem not to be the only one with tis) described here:
"If the executed string contains a USE statement that changes the database context, the change to the database context only lasts until sp_executesql or the EXECUTE statement has finished running." There is nothing magical in SQL server that knows you intend a series of dynamic sql commands to be part of a single job running in a single context. You have to build the entire string for the job you want to execute."
[URL]
So I only get the SPs of the current database.
I am in process to develop TSql code to identify change in data.
I read about Binary_checksum and hashbyte. Some people say hashbyte is better than binay_checksum as chances of collision are less.
But if we may consider following, chances exist in hashbyte too. My question is what is the best way to compare data to identify change (I can't configure CDC) ?
select HASHBYTES('SHA','121'+'34'), HASHBYTES('SHA','12'+'134'),BINARY_CHECKSUM('121','34'),BINARY_CHECKSUM('12','134');
I keep getting requests to increase the width of a varchar colum every now and then.
I want to ask if its perfectly ok when you have active users connecting to the application to do this?
I have a table with a datetime and an Item column.
I want to retrieve only the rows where item didn't change for a given value.
In the example below, given the value of 5 I only want the rows starting at 19:14:50 to 19:26:06.
Dateteime Item
2015-06-05 19:05:03.0002
2015-06-05 19:08:31.0002
2015-06-05 19:14:50.0001
2015-06-05 19:19:33.0001
2015-06-05 19:20:46.0001
[Code] ....
I need to extract a price from a package solution table that was current on a certain date.
Columns are:
Product_Reference int,
Change_Date int, -- Note that this is in yyyymmdd format
Price decimal
So for one items you would get
Product_ReferenceChange_DatePrice
100014200401281.59
100014200605131.75
100014200802121.99
100014200906252.35
100014201002242.50
100014201107151.10
100014201205151.15
The challenge is to return the price of the item on 20070906. In this example 1.75.
I've tried joining it to itself
SELECT DISTINCT p1.[Product_Reference]
,p1.[Change_Date]
,p1.[Price]
FROM PHistory p1
INNER JOIN PHistory p2
ON p1.Product_Reference = p2.Product_Reference
WHERE p1.Product_Reference = 100014
AND p1.Change_Date >= 20070906
and p2.Change_Date < 20070906
But it returns the price above and below that date.
We are planning to convert or change all existing Traces to Extended Events in SQL server 2012. What is the procedure to convert custom traces. We have already created some below custom traces: like this we are planning to convert for all servers.
exec sp_trace_setevent @TraceID, 20, 23, @on
exec sp_trace_setevent @TraceID, 20, 8, @on
exec sp_trace_setevent @TraceID, 20, 12, @on
exec sp_trace_setevent @TraceID, 20, 64, @on
exec sp_trace_setevent @TraceID, 20, 1, @on
exec sp_trace_setevent @TraceID, 20, 21, @on
[code]...
Our client is asking to display the 'parameter panel in right side of the report' insted of top.
how can I do this?
How to reset the value of the change tracking anchor id?
CHANGE_TRACKING_CURRENT_VERSION()
It's a bigint that increments on every DML operation and I just wondered how you could reset it back to zero. Turning change tracking off and on doesn't seem to do it.
how to change the first <TD> to add BGCOLOR in this script:
declare @body varchar(max)
-- Create the body
set @body = cast( (
select td = dbtable + '</td><td>' + cast( entities as varchar(30) ) + '</td><td>' + cast( rows as varchar(30) )
[code]...
Can we create the Database with two schema and having the separate file group for each schema.
View 5 Replies View RelatedSQL 2008 R2
I have a partitioned table in which one of the partitions is on the Primary filegroup. I want to move the data off of that Primary filegroup, and and on to a new filegroup named RTFG6.
Scheme and function currently defined as:
CREATE PARTITION SCHEME [PS1_Left_id] AS PARTITION [PF1_Left_id] TO ([RTFG1], [RTFG2], [RTFG3], [RTFG4], [RTFG5], [PRIMARY])
CREATE PARTITION FUNCTION [PF1_Left_id](int) AS RANGE LEFT FOR VALUES (10, 15, 35, 48, 53)
I've tried split and merge, and for whatever reason, always end up with the Primary filegroup holding data.
How do i get it off of Primary completely, and onto RTFG1 to RTFG6?
I don't want to export to a holding table and re-create the table if i can avoid it, due to identity columns and relationships with multiple tables.
Hi,I have the following SQL procedure I am running to clean up a filegroupand move all data to a single .MDF file:use <db_name>print 'Move <db_name> db contents to MDF file'DBCC SHRINKFILE ('<db_name>_1_Data', EMPTYFILE)DBCC SHRINKFILE ('<db_name>_Log', EMPTYFILE)DBCC SHRINKFILE ('<db_name>_2_Data', EMPTYFILE)DBCC SHRINKFILE ('<db_name>_log2', EMPTYFILE)goTrouble is that I get the following error:Server: Msg 1105, Level 17, State 2, Line 3Could not allocate space for object '<company_name>. Inv. Line' indatabase '<db_name>' because the 'Data Filegroup 1' filegroup is full.There are five files:- a .MDF file (which is already set as the primary filegroup, 43MB insize);- <db_name>_1_data.ndf (this file is 11GB in size);- <db_name>_2_data.ndf (this file is 4GB in size, empty & cannot beshrunk);- 2 .LDF filesI have been able to remove the "<db_name>_2_data.ndf" filesuccessfully, but moving the objects from filegroup 1 to the primaryfilegroup has yielded the same error message every time. Any ideas onwhat I can do to resolve this?
View 1 Replies View Relatedit runs over night, pulls 10.5m rows. Inserts into a table, from a select (so "insert...select", rather than "select into"), from many tables, grouping on a max. It's complex. During the day, it runs fine - maybe 25 minutes. At night it *sometimes* runs fine, but then sometimes takes 4hours.Checking this morning there were 230 threads open for this one query. Checking sys.dm_os_tasks and sys.dm_os_waiting_tasks there were no other wait types on that session_id. None at all. Checking activity monitor, most of the existing threads were suspended on the insert.
There are 24 cores, but NUMA'd. We have maxdop on the server of 8. The maxdop option on the query is 12, just to speed up the select. Index and Stats refreshed daily. We've eight identical tempdb data files, on a separate spindle. Checking those, they are filling up using the round robin correctly
Would the delay be due to SQL trying to combine so many 'select' threads into one 'insert' thread (as it can't insert in parallel; 2014 can, apparently. Upgrades not available!)Should i change the SP to run the select into a temp table (table variable?) with a maxdop of 12, then do the insert into the actual table using a maxdop of 1. Checking the execution plans for a table variable implies the subtree cost comes down from 2.5m to 357k. What's best - temp table or table variable?
How to change the sql service passwords on a SQL 2012 cluster.
View 3 Replies View RelatedAs the title suggests we are looking to change the service account of a SQL mirror implementation. I will be using the same account on all 3 servers involved in the configuration.
I know each server requires the account of the other two adding but as this will be the same account I assume this doesn't apply?
Also for mirrored databases already set up would I need to reconfigure the security for each one?
Is there anything I am missing?
What would be the best process to change the datatype of ntext fields.
I assume just changing the datatype - is not the way to go?
How do I change the file path from C: drive to E:
See attached
I have two databases like each other that one is the backup of another. Each DB have 2 filegroups. I want to replace one filegroup from one db to another. How do I do this? Or how do I backup and then restore?
View 3 Replies View Related