SQL 2012 :: Command To Uninstall Node With Skip Validation?
Jun 25, 2015what is the command to uninstall sql node with skip validation in sql 2012 ?
View 1 Replies
ADVERTISEMENT
Analysis :: Uninstall Clustered Instance From Node
Feb 19, 2015I've installed SSAS 2012 as a failover cluster instance on a 2-node Windows 2012 R2 cluster. All was fine in that regard but I now need to change the instance name so am going about the process of uninstalling and re-installing. I've successfully removed the second node from the configuration using the "Remove cluster node" wizard from the Setup options, but when it comes to removing it from the final node I'm getting the error "the cluster group **** could not be moved from node x to node 'null'". At this point the uninstall fails and the cluster resource remains in cluster administrator. It's obviously done some work/damage because the service won't start now, but it's left in limbo land where I can't do anything with it.
Is there a manual way of removing the instance to overcome this issue (file deletions, registry entry deletions etc.)?
SQL 2012 :: Log Shipping - Reboot Secondary Node And Then Primary Node
Apr 20, 2015I have not used log shipping before and find myself in a position where I need to reboot the secondary node and then the primary node and I don't actually need to failover.
Is there anything I need to be aware of. When rebooting the secondary node I assume the transactions will be held in the primary nodes log till the secondary comes back and just carry on once back up?
When rebooting the primary node nothing needs to be done and the log shipping will just start again once it has come back?
SQL 2012 :: Running 2 Distinct AGs On Each Node Of A Two Node Cluster?
Oct 23, 2014I'm contemplating running two availability groups on a two node WSFC. The WSFC is setup with a file share witness (i.e. no shared storage). Can I safely run 1 AG on one primary node, and the other AG on the other node (as primary). Each AG would have replicas on the passive node. This would effectively allow both servers to be in use at the same time. In a failover event, I understand that both workloads would transfer to a single server - so the box needs to be sized appropriately.
View 1 Replies View RelatedSQL 2012 :: 3 Node Cluster Runs With 2 Node Failures?
Jun 11, 2015We are in the process of building a 3 node SQL Server Cluster (Server 2012/ SQL Server 2012), and we have configured the quorum so that all 3 nodes have a vote (no file share witness as we already have an odd number of nodes).
As I understand it, this should allow the cluster to run as long as 2 of the nodes remain online.
However, the validation report states that 2 node failures would be acceptable and, when we tested this by powering off two of the nodes, the cluster did indeed continue to run on a single node.
Uninstall Sqlexpr32.exe From Command Line
Nov 21, 2007Hi everyone,
I can't uninstall the sqlexpr32.exe from command line.
I read somewhere that I could do it by typing 'start /wait <drive:>sqlexpr32.exe /qb REMOVE=ALL INSTANCENAME=SQLEXPRESS'
but when I do that it extracts the support files to install the sqlexpress but it is already installed.
I'd like to remove it programmaticaly so if I knew the command line to uninstall sqlexpr32.exe, my problem will be solved.
Thanx in advance
Command Line Named Instance Uninstall ?
Oct 17, 2007Hi There
I use the following command line to install a named insatnce fo Sql 2005 Express with Advnaced Services.
Start /wait .SQLEXPR_ADV.exe /qn INSTANCENAME=EnterpriseWorx ADDLOCAL=SQL_Engine,SQL_Data_Files,Client_Components SECURITYMODE=SQL SAPWD=Password123 SQLACCOUNT="NT AUTHORITYLOCAL SERVICE" AGTACCOUNT="NT AUTHORITYLOCAL SERVICE" SQLBROWSERACCOUNT="NT AUTHORITYLOCAL SERVICE"
However i am having trouble finding the command line command to uninstall this named instance and all features.
Anyone know the command ?
Thanx
SQL 2012 :: Bulk Insert - How To Skip First Row
Oct 31, 2014I used code below to do bulk insert. Since csv file first row is column name. How to skip first row?
BULK
INSERT TEST
FROM 'c: est.csv'
WITH
(
FIELDTERMINATOR = ',',
ROWTERMINATOR = ''
)
GO
SQL Server 2012 :: Perform Update But Skip Lock
Mar 7, 2014I open query analyser and on one tab I update a record in a transaction and hold it.
begin tran
update customers set territory = 'x' where customer = 'A00001'
--rollback tran
In a second tab I attempt to update all records in the table
update customers set carrier = ''
Clear this fails because of the lock placed during the first script and this is fine.
However, is there a way to get the 2nd script to ignore the locked rows and just update as many as it can? The obvious answer seemed to be the READPAST hint like follows…
update customers with (READPAST) set carrier = ''
…but this is still blocked by the original lock. I’ve tried combining it with all sorts of other table hints but all seem to get blocked.
The following does work, ignoring the lock and not returning the data
Select * from customers with (READPAST) where customer = 'A00001'
I’ve tried combining this with the update like so…
update customers
set carrier = ''
from customers with (READPAST)
where customer = 'A00001'
..but this is blocked too.
I’m so desperate I tried moving the update into a cursor and update one row at a time. Nothing worked. I thought I might be able to do something like this
If (Select count(*)
from customers with (READPAST)
where customer = 'A00001') > 0
--then perform update
..but this returns a value of 1 even though the following returns no rows.
Select * from customers with (READPAST) where customer = 'A00001'
SQL 2012 :: Getting Value From XML / Node Out Of Table
May 16, 2014I have a table which has a field with a data type of Xml. A sample record might contain something like this:
<?xml version="1.0" encoding="utf-16"?>
<order>
<Product Index="14c9643f-63d9-40c5" ProductID="13" Name="............>
<Attribute Name="Paper" OptCatId="1" Value="72" ....../>
<Attribute Name="Ink" OptCatId="2" Value="6" ......../>
<Attribute Name="Bleed" OptCatId="3" Value="15" ......./>
<Attribute Name="Number of Drops" OptCatId="0" Value="1" ...../>
I need to grab the Node/Attribute with the name of "Number of Drops" and get the value of "Value". So in this case, I simply want to get "1". How could I do this?
SELECT "value of Number of Drops"
FROM myTable
WHERE ID = ....
SQL 2012 :: AlwaysON Setting Up A C Node?
Apr 28, 2014I have an A & B node set up and running. I now want to add a C NODE.
The catch is the C NODE is in a SQL Cluster Environment.
I am guessing I add the Virtual Name of the C node to the current Always ON Cluster?
I tried adding it...the error message says" the Virtual Node is really the A node and to add the A NODE"?
SQL 2012 :: Add Node To Server Cluster
Oct 3, 2015Can I add a new node to an existing sql server 2012 cluster witthout stopping all the current resources?
Currently, there are 2 nodes and 3 sql server instances, which can not be shutdown. Is the process of adding nodes a "online" process?
SQL Server 2012 :: Read All Values From XML Node?
Nov 21, 2013I have the following code and trouble reading values of Bank Accounts. If i remove the line it says "xmlns="http://applications.apch1.com/webservice/schema/" then i my query is working. But i cant remove this becasue that is what i will get response from a web service. All the records are stored in the database with this line included.
DECLARE @MyXML XML
SET @MyXML = '<GetEmployeeDetails xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<return xmlns="http://applications.apch1.com/webservice/schema/">
<CustomerID> A8339 </CustomerID>
<BankAccounts>
[Code] .....
SQL 2012 :: Add Node In A Cluster - Network Configuration?
Sep 8, 2014I have installed SQL Server 2012 on Node1 successfully and trying add node on Node2 and its failing with below message. I attached the screen shot.
Here we are not doing multi-subnet failover clustering. Why we are getting extra and asking for IP and what IP should we enter there?Add Node option should automatically detect the IP we configured on Node1.
[Error Message] To support SQL Server multi-subnet failover clustering, you must select at least one valid IP address for every subnet in the cluster.
[Details] Microsoft.SqlServer.Configuration.Cluster.ClusterIPAddressPublicValidationException: To support SQL Server multi-subnet failover clustering, you must select at least one valid IP address for every subnet in the cluster.
SQL 2012 :: Extracting Node From A Column In A Table That Contains XML
Dec 4, 2014I am trying to extract what I believe is called a Node from a column in a table that contains XML. What's the best way to do this? It is pretty straightforward since I'm not even looking to include a WHERE clause.
What I have so far is:
SELECT CCH.OrderID, CCH.CCXML.query('/cc/auth')
FROM tblCCH AS CCH
SQL 2012 :: Two Node WSFC On A Multi Subnet
Feb 10, 2015We are running SQL Server 2012 Enterprise on Windows 2012 R2. We have set up A WSFC with the primary Node in our East Coast Data Center and the Secondary Node in our West Coast Data Center each node is in a dfferent subnet. Since we have high latency between the sites we run in Asynchronous mode with manual failover only. My quesion concerns Quorum, everything I read would indicate we need a third node (odd number) (e.g. a fileshare Witness) with only the file share and the primary node having a vote...What I don't see is any need for a file share if we can only do manual failover.
View 7 Replies View RelatedSQL 2012 :: SSISDB On New Primary Node Is Not Usable
Mar 6, 2015During the installation of the SSISDB in SQL 2012 AG, the password used to encrypt the database was not preserved. Now when the server is failed over, the SSISDB on the new primary node is not use-able.Document the password and decrypt after using the master key after failover.
View 5 Replies View RelatedSQL 2012 :: Cluster With Multiple Instances On The Same Node?
Jul 14, 2015What I have- Sql server 2012 (Standard Ed) Cluster on Windows 2012 R2 with both instances running on the same node- just to save on License, i.e. technically it’s Act/Pas cluster.
What I am looking for- how to configure cluster (e.g. via quorum, etc) to force both instances failed together? Means if for some reason 1-st instance will fail to node 2 another instance should follow (otherwise it will be Act/Act cluster and 2-nd license is required).
If there is no standard way (cluster configuration I mean) to do it I should create some custom process to monitor where each instance is running.
SQL 2012 :: WSFC Service Not Started In Second Node
Oct 21, 2015I have configured Alwayson HA setup as following environment and versions, and working fine to client side by connected with AG Listener.
Two Node WSFC setup. Node1 (Primary), Node 2(Secondary Replica). Normal quorum(Not shared disk)
Server Platform: HyperV
OS: Windows server 2008 R2 64 bit with SP1
RDBMS: MS SQLSERVER 2012 64 bit with SP2
when I am doing testing Failover method between two nodes. automatic failover not happened.
Just shutdown Node1 and try to connect at client side by using AG Listener name but not succeeded, also Cluster name and AG Listener name are not pinging, Second node2 cluster service is not started by automatically due to as below errors. So how will connect client and overcome this issues? Any modification need to be done on both side WSFC and AlwaysOn SQL? for achieving and automatic failover.
Cluster network 'Cluster Network 1' is partitioned. Some attached failover cluster nodes cannot communicate with each other over the network. The failover cluster was not able to determine the location of the failure. Run the Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapter. Also check for failures in any other network components to which the node is connected such as hubs, switches, or bridges.
Client side got connected once Node1 get started again also cluster services started.
SQL 2012 :: Using VMotion To Migrate AlwaysOn Node
Nov 4, 2015Our network guys have to carry out an IBM Flex Chassis move at our data centre, which will affect the primary replica of one of our SQL 2012 AlwaysOn Availability Group nodes (the secondary replica won't be affected).
They have suggested using vMotion to migrate the primary replica to another virtual host, which will result in a very brief period of network outage for the node.
I've done some reading and have seen a few potential issues regarding Stun During Page Send (SDPS) and increasing thresholds within WSFC. Unfortunately, we're not able to test this prior to the migration, so I have a few questions...
Would it be necessary to failover to the secondary replica node before performing the vMotion (and back again afterwards)?
SQL 2012 :: Symmetrically Encrypt A Single Node In XML Field
Apr 30, 2014How do I reliably symmetrically encrypt a single node in an XML field in my SQL Server 2012 database? I know I cannot use SQL Server encryption to encrypt an XML field and I have been getting unpredictable results with a home grown solution.
View 9 Replies View RelatedSQL 2012 :: AlwaysOn Secondary Node Slower Than Primary
Oct 3, 2014I have a SP that runs on the primary in 18 min and 45 min on the secondary( poorly written cursor,trying to fix it).Both machines are Exactly the same.I ran them in the middle of the night when no one was on the Sec. Node as we use it for reporting.
PLE: 7,000+
AVG Disk sec/write below .01
AVG Disk sec/read below .01
CPU below 5%
both machines set a max dop 4
SQL 2012 :: Two Node Active / Passive Cluster Installation
May 3, 2015Few questions on a SQL Server 2012 two node active/passive cluster installation on Win2012.
1. What are the permissions required for the user used to install SQL Server 2012 cluster. Does it need to have any rights on DC or anywhere else apart from the local nodes ?
2. Can we give ANY meaningful name to "SQL Server Network Name" during installation ? Do we need to manually configure it anywhere else before or after the installation ?
3. On what scenarios we need to check/uncheck DHCP check box ?
SQL Server 2012 :: How To Copy Nested Sub-tree From One Node To Another
May 12, 2015I have a tree and I need to copy a nested sub-tree (an element with its children, which in turn may have their owns) from one place to another.
The system should allow to handle up to 8 levels. I do know how to move, but cannot figure out how to copy.
Below is a working example With Create Table, Select and Cut / Paste (implemented via Update).
I would like to know how to copy a nested tree with reference id 4451 from Parent_Id 1 to Parent_Id = 2
--***** Table Definition With Insert Into to provide some basic data ****
IF (OBJECT_ID ('myRefTable', 'U') IS NOT NULL)
DROP TABLE myRefTable;
GO
CREATE TABLE myRefTable
(
Reference_Id INT DEFAULT 0 NOT NULL CONSTRAINT myRefTable_PK PRIMARY KEY,
[Code] ....
How to Copy nested sub-tree 4451 with all its children to Parent_Id 2, without deleting from Parent_Id = 1 ?
SQL 2012 :: Node Cluster Active / Passive With 10 Instances
Jun 5, 2015It is an active passive cluster which doesn’t allow any testing. All instances have to be failed over together, we aren’t allowed to just failover 1 even for testing purposes. Node 1 is the active node and we can failover to node 2 for 30 days free of charge but services have to then be failed back.
We need to run the cluster with node 1 as the primary node always and 2 just use for failover testing or for less than 30 day periods whilst performing cluster patch upgrades etc.
Now l am sure we could fail over 1 instances at a time for testing and diagnosing issues plus if add a new instance that's not production to get to the platform level as the rest of the instances this would avoid taking production down in the fail over process.
SQL 2012 :: Specify Server Installation Location When Adding Second Node To Cluster
Jun 6, 2014When adding a node to a SQL Server 2012 Standard edition cluster, how I do I identify the location for SQL server shared components and the rest of the SQL Server installation binaries?
When adding a node to a SQL Server 2012 Standard edition cluster all the binaries went to the C: drive default location. We put those files on a different drive when installing the first node. What needs to be done so both nodes have the binaries on the same drives and folders?
SQL 2012 :: AlwaysOn Availability Group Listener DNS Resolving To DR Node
Jan 19, 2015We are rolling out the use of Availability Group listeners to our SQL Server 2012 Environment which has a 2 node multi-subnet cluster. The Primary is R/W and the Secondary is a non-readable node that would be manually failed over to in a DR scenario
I have set up the AGL and asked the sysadmins to create a DNS record in both subnets with fixed IP's.
The issue I have having is that when I ask the app developers to connect to the databases using the AGL it is totally random whether the AGL resolves to the Primary or DR node - as a result that are having problems getting their apps to connect.
I was thinking of asking the sys admins to remove the DNS record in the DR subnet and then add it back in should we need to fail over - but I was thinking there must be a better way.
SQL 2012 :: Primary Server Went Down And Unable To Failover Services To Second Node
Mar 27, 2015y'day we faced situation one of the primary server went down and unable to failover the services to second node . by checking in logs we found
Cluster network 'Public' is partitioned. Some attached failover cluster nodes cannot communicate with each other over the network. The failover cluster was not able to determine the location of the failure. Run the Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapter. Also check for failures in any other network components to which the node is connected such as hubs, switches, or bridges.
SQL 2012 :: Backup Database - Two Node Cluster To Local Disk?
May 12, 2015Can we backup a DB from SQL Server 2012 (Ent. edition) two node cluster to a local disk ?. Is it possible ?
View 7 Replies View RelatedSQL 2012 :: IP Required To Setup 2 Node Active Passive Cluster?
Aug 14, 2015let me know apart from the following what else is required
2 for private network
2 for public network ......
1 for virtual server/windows cluster ip which is used to connect application
SQL 2012 :: Implement Validation To XML Data To Prevent Injection
Jul 31, 2015In my database some of the store procedures getting the data from xml nodes.so I need to implement the validation to xml data for prevent sql injection.
View 0 Replies View RelatedSQL 2012 :: No Disks Were Found On Which To Perform Cluster Validation Tests
Sep 9, 2014I am getting following errors in my Cluster Validation report when trying to create a Windows Cluster.
I have 2 nodes DB01 and DB02 . Each has 1 public ip, 1 private ip (for heartbeat), 2 private ips for SAN1 and SAN2. The private ip's to SAN are directly connected via Network Adaptor in DB01 and DB02.
Validate Microsoft MPIO-based disks
Description: Validate that disks that use Microsoft Multipath I/O (MPIO) have been configured correctly.
Start: 9/9/2014 1:57:52 PM.
No disks were found on which to perform cluster validation tests.
Stop: 9/9/2014 1:57:53 PM.
[Code] ...
SQL 2012 :: Instance Name Not Appearing In Drop Down List On Cluster Node Configuration Window
May 29, 2013I am trying to install the MS SQL Server 2012 Failover Cluster on Windows Server 2012 . I successfully Installed the Failover cluster instance on my primary node.
But when I am running the installation process on passive node to add node in the failover cluster I am stuck with very unique kind of issue.
I am following the Standard process of Installation and I am getting the same windows for each next process, but after License Agreement window when I get the Cluster Node Configuration window, then in "SQL Server Instance Name" drop down box I am not getting the Name of Instance which is already installed on the primary node. But this Instance complete information is appearing in below given box.
Only issue is Instance name is not appearing in the drop down list, that's why I am not able to select and when I click on next it trough error and do not proceed.