I am looking to create an SSRS report based on multiple locations. There will be one report that presents a summary of all reports, and then individual report for each location.Instead of creating 2 separate reports, is it possible in SSRS to display different datasets based on the parameter selected?
View 3 Replies
hai, iam new to ssrs please help me,
my report having 10 columns, i can explain my need with example that is, assume like this customer id is first column of my table customer id is 101 it having 3 departments a1,b1,c1,perticular department that is a1 having emp1,b1 having emp2,c1 having emp 3.
i want output like this when clicking + customer id driildwon it display 3 departments taht is a1,b1,c1, when +a1 drill down clicking i need to dispaly emp1, corresponding b1 to emp2 , c1 to emp 3.
above explanation is only one column of the table, like that iam also displaying this driiling procedure for remaining different columns.
and i need to display customer information by weekly,daily,monthly,yearly at bottom of the report
please give which logic used in creating format like above drilldown report which having multiple drilldowns for all columns in a table
if any body give procedure for creating fromat for drilldown report which having multiple drilldowns for all columns in a table is appriciate.
thanks
jacks
We use to get SSRS report through mail in the form of excel multiple tabs. We have 4-5 tabs. We need to delete one of that tab from processing. How can I delete that tab without come into the excel tab
View 1 Replies View RelatedHow do I get data on my linked report based on my grouped subtotal and grand total from the main report. The subtotal and grand total are calculated columns.
I have a 3 columns in my matrix in the SSRS summary report. Actn_COAST, ActnCITY and NumbOfAccts.
The following is code for my summary report. The results are shown below.
SELECT Distinct ActnCITY, Count(ACCT) as NumbOfAccts,
CASE WHEN ActnCITY in ('NY', 'OH', IN, 'NJ', 'SC', 'NC') THEN 'EAST COAST'
WHEN ActnCITY IN ('CA'. 'NV', 'UT', 'WA', 'OR') THEN 'WEST COAST'
ELSE 'OTHER'
END AS Actn_COAST
FROM tbl1
where ACTNDATE between @STARTDT and @EndDT
Code for my detail report contains the following SQL
SELECT * FROM tbl1 where ACTNDATE between @STARTDT and @EndDT AND @ActnCITY = ActnCITY
I have linked my report based on the NumbOfAccts column. I am able to get data if I click any of the NumbOfAccts values related to the state I want. However when I am not sure how to make the subtotal and grand total work. I want when I click on the subtotal of either coast, I should be able to see records of that coast e.g., if I select 37 I should be able to see all the records in East Coast. If I click on the Grand Total, I only want data related to those 2 coasts.
I have an SSRS Report that I created. I'd like to set up a job that will run every hour, and what the job will do is send an SSRS report to a select group of recipients when a certain criteria is met. How do I go about doing this? My SSRS knowledge is very limited.
Additional Info:I created the report with a one time schedule to a certain email address. I do see the report schedule in the reportserver DB. Because I already have the schedule and the subscription id, I think all I have to do is call that subscription, but that's where I'm lost.
Hi All,
I have a question regarding how to use report prompts in SSRS reports that are based on SQL queries.
When I added the prompt into the query for use as a filter value, it says that there is an error.
It does not recognise the '!' inside the parameter prompt string. Example is parameter!month_prompt.Value, which the ! is not recognised.
Your help is much appreciated.
Thanks & Regards,
Mohd Fadzli
I have a detailed report in ssrs in which data can come from start date and end date parameters.
but the problem is. for example i gave startdate as 01/01/2015 and end date as 09/31/2015 then the data must be in displayed in such a way that jan month in one tab and feb month data in one tab and sooo on to sep month data in new tab when i export to Excel.
Is this possible in ssrs ?
Hi,
I have created a report using Report designer (Visual Studio, using Data Model as a data source), in the report I had created few datasets (with single filed) to populate the report parameters, lets say I have created a multi valued Parameter CustomerName and assigned field from a dataset,
result are coming correctly and combo box is getting populated but the customers are not in alphabetical order!
I want to sort it and need to specify it in report (please note that I am using Report Model as a data source and I cant sort the source table in the data base to get the result sorted)
Please let me know if anybody has done that or forward me if know some link which talks about it.
Thanks in advance.
Regards,
Jayant Jape
I am in the process of creating a Report, and in this, i need ONLY the row groups (Parents and Child).I have a Parent group field called "Dept", and its corresponding field is MacID.I cannot create a child group or Column group (because that's not what i want).I am then inserting rows below MacID, and then i toggle the other rows to MacID and MacID to Dept.
View 3 Replies View RelatedI'm trying to create an email report which gives a result of multiple results from multiple databases in a table format bt I'm trying to find out if there is a simple format I can use.Here is what I've done so far but I'm having troble getting into html and also with the database column:
EXEC msdb.dbo.sp_send_dbmail
@subject
= 'Job Summary',
@profile_name =
'SQL SMTP',
[code]....
I want to develop a ssrs report which is grouped by month?
View 4 Replies View RelatedI created the report, which has 4 pages. Each page contains bunch of tables and charts, which display data in scope of dataset, created for each page and reflecting certain subject. Each page also has Header and Footer.
My users requested, the report has possibility to include or not include data on Page #4.
Other words, report should display 3 or 4 pages based on the entered parameter.
1. I created parameter named “Include #### metrics”, which contains options: Y, N
2. For each object on the page 4 I added dependency on the selected parameter in the visibility option.
Now if user select parameter Not include Page #4, report displays 3 pages as expected and page #4 is empty, but with Header and Footer.
The problem: Their preference is to not to show page 4 at all if someone chooses to not to include #### metrics.
My question is how to force the report to display just 3 selected pages.
I am wanting to creating a column based on a value in a flatfile, and insert that value into the destination table...
I have a flatfile and a oledb destination, I dropped a script component on the dataflow tab, and I am wanting to take an existing field and create a for lack of a better word, "CODE" field based on that value. How would I accomplish this?
Example--- where description = Test1 code = 1, Test2 code = 2, and same thing for Test3
Description code
Test1 1
Test2 2
Test3 3
I'm using a SQL 2008 database on a SQL 2012 hosted server. I have an autoincrement ID for locations that my members create. These go up by 1.... eg. 9400, 9401, 9402.
Tonight a member attempted to make a new location and the ID went from 9407, 9408 and JUMPED to 10408. Any subsequent creations only continue from 10408 onwards.
What happened here? 9409 to 10407 just aren't available.
Hello,
I have a stored procedure that creates a temporary table, and then populates it using an INSERT and then a series of UPDATE statements. The procedure then returns the temporary table which will contain data in all of its columns.
When I call this procedure from SSRS 2005, the rowset returned contains data in only those columns that are populated by the INSERT statement. The columns that are set via the UPDATE statements are all empty. I read (in the Hitchhikers Guide to Reporting Services) that SSRS will only process the first rowset in a stored procedure that generates multiple rowsets. Is this true? Is this why SSRS does not retrieve data for the columns that are populated by the UPDATE statements?
Here is the stored procedure:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-- File: sp_GetProgramsWatchedByDateRange.sql
-- Desc: Returns EDP program and related channel (i.e., provider) information from the IPTV Data warehouse.
-- Note that some of that data used by this procedure are obtained from the RMS_EPG database
-- which is created by an application (loadEPG) that loads the EPG data from a GLF format XML file.
-- Auth: H Hunsaker
-- Date: 11/07/2006
-- Example invocation
-- EXEC dbo.sp_GetProgramsWatchedByDateRange ...
-- Arguments/Parameters:
-- Parameter Name Type Description
-- 3. StartDate datetime First date of reporting period
-- 4. EndDate datetime Last date of reporting period
-- TerseMode bit Return all columns? (1 = no, 0 = yes)
-- 5. AsXML bit Resultset format (0 = standard, 1 = XML)
-- 6. Debug bit Debug mode (0 = off, 1 = on). Currently disabled
IF OBJECT_ID (N'dbo.sp_GetProgramsWatchedByDateRange') IS NOT NULL
DROP PROCEDURE dbo.sp_GetProgramsWatchedByDateRange
GO
CREATE PROCEDURE dbo.sp_GetProgramsWatchedByDateRange
@StartDate datetime = NULL,
@EndDate datetime = NULL,
@TerseMode bit = 0,
@AsXML bit = 0,
@Debug bit = 0
AS
-- Notes: Much of the program content (roles, flags, etc.) that we want is not stored in the IPTV data warehouse.
-- So I am going to the RMS_EPG database to obtain that information.
-- We will have to ensure that the 2 databases are generated at the same or a matching time
-- in order to to ensure that all programID values in the data warehouse can be located in the RMS_EPG database.
-- Debug code for testing
-- DECLARE @StartDate datetime
-- DECLARE @EndDate datetime
-- DECLARE @TerseMode bit
--SET @StartDate = NULL
--SET @EndDate = NULL
--SET @TerseMode = 1
SET NOCOUNT ON
CREATE TABLE #programWatched
(
--IPTV device ID
tdeviceId uniqueidentifier NULL,
taccountId uniqueidentifier NULL,
-- Basic program information
tprogram int NULL, -- programID from EPG XML, needed to access program data in the RMS_EPG db.
tprogramId uniqueidentifier NULL, -- programID generated by IPTV
tprogramTitle varchar(150) NULL,
tprogramEpisodeTitle varchar(100) NULL,
tprogramDescription varchar(500) NULL,
toriginDateTime datetime NULL,
tduration bigint NULL,
tprogramType nvarchar(100) NULL,
tchannelCallName nvarchar(20) NULL,
--Rating
programMPAARating varchar(50) NULL,
programVCHIPRating varchar(50) NULL,
programMPAARatingVal smallint NULL,
programVChipRatingVal smallint NULL,
-- Categories
programGenre varchar(50) NULL,
programCategory1 varchar(50) NULL,
programCategory2 varchar(50) NULL,
programCategory3 varchar(50) NULL,
programCategory4 varchar(50) NULL,
-- Roles
programActor1FirstName varchar(50) NULL,
programActor1LastName varchar(50) NULL,
programActor1 varchar(100) NULL,
programActor2FirstName varchar(50) NULL,
programActor2LastName varchar(50) NULL,
programActor2 varchar(100) NULL,
programActor3FirstName varchar(50) NULL,
programActor3LastName varchar(50) NULL,
programActor3 varchar(100) NULL,
programActor4FirstName varchar(50) NULL,
programActor4LastName varchar(50) NULL,
programActor4 varchar(100) NULL,
programActor5FirstName varchar(50) NULL,
programActor5LastName varchar(50) NULL,
programActor5 varchar(100) NULL,
programActor6FirstName varchar(50) NULL,
programActor6LastName varchar(50) NULL,
programActor6 varchar(100) NULL,
programActor7FirstName varchar(50) NULL,
programActor7LastName varchar(50) NULL,
programActor7 varchar(100) NULL,
programActor8FirstName varchar(50) NULL,
programActor8LastName varchar(50) NULL,
programActor8 varchar(100) NULL,
programDirectorFirstName varchar(50) NULL,
programDirectorLastName varchar(50) NULL,
programDirector varchar(100) NULL,
programWriterFirstName varchar(50) NULL,
programWriterLastName varchar(50) NULL,
programWriter varchar(100) NULL,
programProducerFirstName varchar(50) NULL,
programProducerLastName varchar(50) NULL,
programProducer varchar(100) NULL,
-- Flags
ClosedCaption bit NULL,
InStereo bit NULL,
Repeats bit NULL,
New bit NULL,
Live bit NULL,
Taped bit NULL,
Subtitled bit NULL,
SAP bit NULL,
ThreeD bit NULL,
Letterbox bit NULL,
HDTV bit NULL,
Dolby bit NULL,
DVS bit NULL,
FlagOrdinalValue smallint NULL,
-- Channel
tchannelId int NULL,
callLetters varchar(20) NULL,
displayName varchar(50) NULL,
type varchar(50) NULL,
networkAffiliation varchar(50) NULL
)
-- I store the program watching data in a temp table because
-- data from the VIL and the Sandbox that were used to test this procedure were either incomplete or invalid.
-- Use of a temp table with a series of updates allow me more control over the result set.
IF @StartDate IS NOT NULL AND @EndDate IS NOT NULL
INSERT INTO #programWatched (
tdeviceId,
tprogramId,
--tprogramTitle,
--tprogramEpisodeTitle,
toriginDateTime,
tduration,
--tprogramType,
--tchannelCallName,
ClosedCaption,
InStereo,
Repeats,
New,
Live,
Taped,
Subtitled,
SAP,
ThreeD,
Letterbox,
HDTV,
Dolby,
DVS
)
SELECT pw.DeviceID,
pw.programID,
--epg.program,
--epg.programTitle,
--epg.programEpisodeTitle,
pw.originTime AS 'When Watched',
pw.Duration AS 'Duration Seconds',
--epg.programType,
--epg.channelCallName,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -- program flag values default to zero, as we do not want NULL values.
FROM DW_EventClientProgramWatched pw
WHERE programID IS NOT NULL AND programID != '00000000-0000-0000-0000-000000000000' -- These values should not occur, but they did in the test system
AND originTime BETWEEN @StartDate AND @EndDate
ELSE
INSERT INTO #programWatched (
tdeviceId,
tprogramId,
--tprogramTitle,
--tprogramEpisodeTitle,
toriginDateTime,
tduration,
--tprogramType,
--tchannelCallName,
ClosedCaption,
InStereo,
Repeats,
New,
Live,
Taped,
Subtitled,
SAP,
ThreeD,
Letterbox,
HDTV,
Dolby,
DVS
)
SELECT pw.DeviceID,
pw.programID,
--epg.program,
--epg.programTitle,
--epg.programEpisodeTitle,
pw.originTime AS 'When Watched',
pw.Duration AS 'Duration Seconds',
--epg.programType,
--epg.channelCallName,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -- program flag values default to zero, as we do not want NULL values.
FROM DW_EventClientProgramWatched pw
WHERE programID IS NOT NULL AND programID != '00000000-0000-0000-0000-000000000000' -- These values should not occur, but they did in the test system
-- AccountId/SubscriberId
UPDATE #programWatched
SET taccountId = (SELECT accountId
FROM DW_BRDB_bm_device d
WHERE d.deviceId = tdeviceId)
-- program (this is the integer program ID stored in the EPG XML, not to be confused with the IPTV programId)
-- a program can occur on multiple channels, so we filter channels where scheduleTime <= originTime <= scheculeTime + durationSecs
UPDATE #programWatched
SET tchannelCallName = (SELECT TOP 1 channelCallName
FROM DW_EPG EPG
WHERE tprogramId = EPG.programId AND toriginDateTime BETWEEN scheduleTime AND DATEADD(s, epg.durationSecs, epg.scheduleTime))
UPDATE #programWatched
SET tprogram = (SELECT TOP 1 program FROM DW_EPG EPG WHERE tprogramId = EPG.programId AND tchannelCallName = channelCallName),
tprogramTitle = (SELECT TOP 1 programTitle FROM DW_EPG EPG WHERE tprogramId = EPG.programId AND tchannelCallName = channelCallName),
tprogramEpisodeTitle = (SELECT TOP 1 programEpisodeTitle FROM DW_EPG EPG WHERE tprogramId = EPG.programId AND tchannelCallName = channelCallName),
tprogramType = (SELECT TOP 1 programType FROM DW_EPG EPG WHERE tprogramId = EPG.programId AND tchannelCallName = channelCallName)
-- Rating (otained from programValues, can also be obtained from programFlags)
UPDATE #programWatched
SET programMPAARating = (SELECT TOP 1 programValue
FROM RMS_EPG..programValue pv
WHERE tprogram = pv.programID AND pv.programValueTypeId = 9)
UPDATE #programWatched
SET programMPAARatingVal = CASE programMPAARating
WHEN 'G' THEN 10
WHEN 'PG' THEN 25
WHEN 'PG-13' THEN 30
WHEN 'R' THEN 35
WHEN 'NC-17' THEN 50
WHEN 'NRAO' THEN 60
WHEN 'NR' THEN 0
ELSE 0
END
UPDATE #programWatched
SET programVChipRating = (SELECT TOP 1 programValue
FROM RMS_EPG..programValue pv
WHERE tprogram = pv.programID AND pv.programValueTypeId = 8)
UPDATE #programWatched
SET programVChipRatingVal = CASE programVChipRating
WHEN 'TV-Y' THEN 10
WHEN 'TV-Y7' THEN 20
WHEN 'TV-G' THEN 35
WHEN 'TV-PG' THEN 40
WHEN 'TV-14' THEN 45
WHEN 'TV-MA' THEN 60
ELSE 0
END
-- Genre
UPDATE #programWatched
SET programGenre = (SELECT TOP 1 programCategoryTypeValue
FROM RMS_EPG..programCategory pc
INNER JOIN RMS_EPG..programSubCategoryType psct ON psct.programSubCategoryTypeId = pc.programCategoryId
INNER JOIN RMS_EPG..programCategoryType pct ON pct.programCategoryTypeId = psct.programCategoryTypeId
WHERE tprogram = pc.programID)
-- Categories
UPDATE #programWatched
SET programCategory1 = (SELECT TOP 1 programSubCategoryTypeValue
FROM RMS_EPG..programCategory pc
INNER JOIN RMS_EPG..programSubCategoryType pct ON pct.programSubCategoryTypeId = pc.programCategoryId
WHERE tprogram = pc.programID)
UPDATE #programWatched
SET programCategory2 = (SELECT TOP 1 programSubCategoryTypeValue
FROM RMS_EPG..programCategory pc
INNER JOIN RMS_EPG..programSubCategoryType pct ON pct.programSubCategoryTypeId = pc.programCategoryId
WHERE tprogram = pc.programID AND programSubCategoryTypeValue NOT IN (programCategory1))
UPDATE #programWatched
SET programCategory3 = (SELECT TOP 1 programSubCategoryTypeValue
FROM RMS_EPG..programCategory pc
INNER JOIN RMS_EPG..programSubCategoryType pct ON pct.programSubCategoryTypeId = pc.programCategoryId
WHERE tprogram = pc.programID AND programSubCategoryTypeValue NOT IN (programCategory1, programCategory2))
UPDATE #programWatched
SET programCategory4 = (SELECT TOP 1 programSubCategoryTypeValue
FROM RMS_EPG..programCategory pc
INNER JOIN RMS_EPG..programSubCategoryType pct ON pct.programSubCategoryTypeId = pc.programCategoryId
WHERE tprogram = pc.programID AND programSubCategoryTypeValue NOT IN (programCategory1, programCategory2, programCategory3))
-- Roles
UPDATE #programWatched
SET programDirectorFirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 2)
UPDATE #programWatched
SET programDirectorLastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 2)
UPDATE #programWatched
SET programDirector = programDirectorLastName + ' , ' + programDirectorFirstName
UPDATE #programWatched
SET programWriterFirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 7)
UPDATE #programWatched
SET programWriterLastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 7)
UPDATE #programWatched
SET programWriter = programWriterLastName + ' , ' + programWriterFirstName
UPDATE #programWatched
SET programProducerFirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 6)
UPDATE #programWatched
SET programProducerLastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 6)
UPDATE #programWatched
SET programProducer = programProducerLastName + ' , ' + programProducerFirstName
UPDATE #programWatched
SET programActor1FirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1)
UPDATE #programWatched
SET programActor1LastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1)
UPDATE #programWatched
SET programActor1 = programActor1LastName + ' , ' + programActor1FirstName
UPDATE #programWatched
SET programActor2FirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName))
UPDATE #programWatched
SET programActor2LastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleLastName NOT IN (programActor1LastName) AND programRoleLastName NOT IN (programActor1LastName))
UPDATE #programWatched
SET programActor2 = programActor2LastName + ' , ' + programActor2FirstName
UPDATE #programWatched
SET programActor3FirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName))
UPDATE #programWatched
SET programActor3LastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleLastName NOT IN (programActor1LastName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleLastName NOT IN (programActor2LastName) AND programRoleLastName NOT IN (programActor2LastName))
UPDATE #programWatched
SET programActor3 = programActor3LastName + ' , ' + programActor3FirstName
UPDATE #programWatched
SET programActor4FirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName))
UPDATE #programWatched
SET programActor4LastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName))
UPDATE #programWatched
SET programActor4 = programActor4LastName + ' , ' + programActor4FirstName
UPDATE #programWatched
SET programActor5FirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName)
AND programRoleFirstName NOT IN (programActor4FirstName) AND programRoleLastName NOT IN (programActor4LastName))
UPDATE #programWatched
SET programActor5LastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName)
AND programRoleFirstName NOT IN (programActor4FirstName) AND programRoleLastName NOT IN (programActor4LastName))
UPDATE #programWatched
SET programActor5 = programActor5LastName + ' , ' + programActor5FirstName
UPDATE #programWatched
SET programActor6FirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName)
AND programRoleFirstName NOT IN (programActor4FirstName) AND programRoleLastName NOT IN (programActor4LastName)
AND programRoleFirstName NOT IN (programActor5FirstName) AND programRoleLastName NOT IN (programActor5LastName))
UPDATE #programWatched
SET programActor6LastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName)
AND programRoleFirstName NOT IN (programActor4FirstName) AND programRoleLastName NOT IN (programActor4LastName)
AND programRoleFirstName NOT IN (programActor5FirstName) AND programRoleLastName NOT IN (programActor5LastName))
UPDATE #programWatched
SET programActor6 = programActor6LastName + ' , ' + programActor6FirstName
UPDATE #programWatched
SET programActor7FirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName)
AND programRoleFirstName NOT IN (programActor4FirstName) AND programRoleLastName NOT IN (programActor4LastName)
AND programRoleFirstName NOT IN (programActor5FirstName) AND programRoleLastName NOT IN (programActor5LastName)
AND programRoleFirstName NOT IN (programActor6FirstName) AND programRoleLastName NOT IN (programActor6LastName))
UPDATE #programWatched
SET programActor7LastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName)
AND programRoleFirstName NOT IN (programActor4FirstName) AND programRoleLastName NOT IN (programActor4LastName)
AND programRoleFirstName NOT IN (programActor5FirstName) AND programRoleLastName NOT IN (programActor5LastName)
AND programRoleFirstName NOT IN (programActor6FirstName) AND programRoleLastName NOT IN (programActor6LastName))
UPDATE #programWatched
SET programActor7 = programActor7LastName + ' , ' + programActor7FirstName
UPDATE #programWatched
SET programActor8FirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName)
AND programRoleFirstName NOT IN (programActor4FirstName) AND programRoleLastName NOT IN (programActor4LastName)
AND programRoleFirstName NOT IN (programActor5FirstName) AND programRoleLastName NOT IN (programActor5LastName)
AND programRoleFirstName NOT IN (programActor6FirstName) AND programRoleLastName NOT IN (programActor6LastName)
AND programRoleFirstName NOT IN (programActor7FirstName) AND programRoleLastName NOT IN (programActor7LastName))
UPDATE #programWatched
SET programActor8LastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName)
AND programRoleFirstName NOT IN (programActor4FirstName) AND programRoleLastName NOT IN (programActor4LastName)
AND programRoleFirstName NOT IN (programActor5FirstName) AND programRoleLastName NOT IN (programActor5LastName)
AND programRoleFirstName NOT IN (programActor6FirstName) AND programRoleLastName NOT IN (programActor6LastName)
AND programRoleFirstName NOT IN (programActor7FirstName) AND programRoleLastName NOT IN (programActor7LastName))
UPDATE #programWatched
SET programActor8 = programActor8LastName + ' , ' + programActor8FirstName
-- Channel (provider) Call Letters, Display Name and Type
-- Is this correct? Should we get the channelId from the schedule table?
-- Is this efficient? View execution plan
UPDATE #programWatched
SET tchannelId = (SELECT TOP 1 c.channelId
FROM RMS_EPG..channel c
INNER JOIN RMS_EPG..schedule s on s.channelID = c.channelID
WHERE s.programId = tprogram)
UPDATE #programWatched
SET callLetters = (SELECT TOP 1 c.channelCallLetters
FROM RMS_EPG..channel c
INNER JOIN RMS_EPG..schedule s on s.channelID = c.channelID
WHERE s.programId = tprogram and s.channelId = tchannelId)
UPDATE #programWatched
SET displayName = (SELECT TOP 1 c.channelDisplayName
FROM RMS_EPG..channel c
JOIN RMS_EPG..schedule s on s.channelID = c.channelID
WHERE s.programId = tprogram and s.channelId = tchannelId)
UPDATE #programWatched
SET type = (SELECT TOP 1 c.channelType
FROM RMS_EPG..channel c
INNER JOIN RMS_EPG..schedule s on s.channelID = c.channelID
WHERE s.programId = tprogram and s.channelId = tchannelId)
UPDATE #programWatched
SET networkAffiliation = (SELECT TOP 1 c.channelNetworkAffiliation
FROM RMS_EPG..channel c
INNER JOIN RMS_EPG..schedule s on s.channelID = c.channelID
WHERE s.programId = tprogram and s.channelId = tchannelId)
IF @TerseMode = 0
SELECT *
FROM #programWatched
ORDER BY toriginDateTime
ELSE
-- Get only Genre, title, show date/time, rating, call letters
SELECT tDeviceId, tprogramTitle, tprogramEpisodeTitle, programGenre, toriginDateTime, programMPAARating, programVCHIPRating, tchannelCallName
FROM #programWatched
ORDER BY toriginDateTime
DROP TABLE #programWatched
SET NOCOUNT OFF
GO
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I also tried a query that populates some of its columns via subqueries. The query works fine when executed by the SQL Sevrer Query Analyzer,
meaning that all columns contain values, but when executed from SSRS, the columns that are poulated by the subqueries are empty, and only the columns that are not set by subqueries contain values:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
SELECT PW.DeviceID,
PW.originTime AS 'When Watched',
PW.programID,
PW.Duration AS 'Duration Seconds',
(SELECT TOP 1 programTitle FROM DW_EPG WHERE DW_EPG.programId = PW.programId AND PW.originTime BETWEEN DW_EPG.scheduleTime
AND DATEADD(second, durationSecs, DW_EPG.scheduleTime)) AS Title,
(SELECT TOP 1 program FROM DW_EPG WHERE DW_EPG.programId = PW.programId AND PW.originTime BETWEEN DW_EPG.scheduleTime AND
DATEADD(second, durationSecs, DW_EPG.scheduleTime)) As program,
(SELECT TOP 1 programCategoryTypeValue
FROM RMS_EPG..programCategory PC
INNER JOIN RMS_EPG..programSubCategoryType PSCT ON psct.programSubCategoryTypeId = PC.programCategoryId
INNER JOIN RMS_EPG..programCategoryType PCT ON PCT.programCategoryTypeId = PSCT.programCategoryTypeId
WHERE PC.programID = (SELECT TOP 1 program FROM DW_EPG WHERE DW_EPG.programId = PW.programId AND PW.originTime BETWEEN
DW_EPG.scheduleTime AND DATEADD(second, durationSecs, DW_EPG.scheduleTime))) AS Genre,
(SELECT TOP 1 programSubCategoryTypeValue
FROM RMS_EPG..programCategory PC
INNER JOIN RMS_EPG..programSubCategoryType PSCT ON psct.programSubCategoryTypeId = PC.programCategoryId
INNER JOIN RMS_EPG..programCategoryType PCT ON PCT.programCategoryTypeId = PSCT.programCategoryTypeId
WHERE PC.programID = (SELECT TOP 1 program FROM DW_EPG WHERE DW_EPG.programId = PW.programId AND PW.originTime
BETWEEN DW_EPG.scheduleTime AND DATEADD(second, durationSecs, DW_EPG.scheduleTime))) AS Category
FROM DW_EventClientProgramWatched PW
ORDER BY DeviceId, programId, originTime
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Any help is appreciated
My application uses 2 databases from 2 different server. When i create a report model in business intellegence development studio I can only create 1 datasource for each database, and 1 datasource view for each datasource. Then when I create a new report, I can only use one datasource.
Is it possible that my report can be built on more than one databases?
thanks in advance
What is the recommendation for having multiple data files ? I've read 1 per CPU etc... some say keep it all in one data file.
How do multiple sql data files help when they are located in the same raid group/single volume ?
This is the setup that I have:
4 CPU box with 2x P400 array controller to 2x MSA10 exclosure (for data only, tempdb,logs,backups are on other arrays)
one array controller per enclosure. single big RAID 10 volume on each ( or should I do 4-4-2 separation).
(In single big raid 10, All disks would help for performance of each query... I don't want to create separate raid groups, mostly due to growth constraints in the future, am I wrong ?)
How should I split database across these two enclosures ? one,two data files on each or more ?
How would this look in OLAP vs OLTP scenarios ?
Thank you.
how can i create a report like this format in SSRS ? In this format grouping will be applied on Phase code and tablix/matrix will be repeated the same way like shown above.The headers must repeat on the next pages too.Web Developer / Web Designer / Software Developer / UI Designer
View 5 Replies View RelatedHi
i need to create a Report from XML file which available in my current folder.
can anybody suggest How to create a Data source from XML file and How to make a query for that.
Thanks
Mahesh
I have created an SSRS report, but the data does not refresh. I am using the SSRS Report Buidler to create reports and when I run the query in the dataset, the results return as expected. However, when I run the report itself, the dataset appears old.
View 6 Replies View RelatedWhile trying to configure data source and data set on Report Builder 3.0 I created a table using table wizard. After I run I get the following error message:
"The report server has encountered a configuration error. logon failed for the unattended execution account. (rsServerConfigurationError)"
I checked the SQL Server Configuration Manager and saw the following error when i click on "SQL Server Services" on the left panel."error message: "The Server threw an exception. [0x80010105]"
I am trying to create a query that outputs the following data from multiple tables. Here is an example of the raw data right now
Date | MachineNumber | TestName
---------------------------------------
1/1/2015 | 500 | Something
1/1/2015 | 500 | Something
1/1/2015 | 500 | Something
1/1/2015 | 500 | Something
1/1/2015 | 510 | NewTest
1/1/2015 | 510 | NewTest
1/1/2015 | 510 | NewTest
1/1/2015 | 620 | Test#1
Here is the desired counted output, I would like to pull distinct Date, MachineNumber, TestName and then count how many times they occur in the raw data form.I do need to perform a case on the date because right now its in a datetime format and I only need the date.
Date | MachineNumber | TestName | TestOccuranceCount
-----------------------------------------------------------------
1/1/2015 | 500 | Something | 4
1/1/2015 | 510 | NewTest | 3
1/1/2015 | 620 | Test#555 | 1
I am pulling three columns with the same names from 8 different tables. What I need to display the date, machine & test name and count how many times a test was run on a machine for that date. I have a feeling this can be handled by SSAS but haven't built an analysis cube yet because I am unfamiliar with how they work. I was wondering if this is possible in a simple query. I tried to set something up in a #Temp table. Problem is the query takes forever to run because I am dealing with 1.7 Million rows. Doing an insert into #temp select columnA, columnB, columnC from 8 different tables takes a bit.
I Want to Create Drill Down Report in SSRS . Here we Should Display Year Wise ,Month Wise, Day Wise For Particular party Salry . How To Do it?
View 2 Replies View Related
Ok,
I am writing an app that will allow a user to select various information for displaying in a report. The sql is dynamically generated when the user clicks on "Get Report". Currently, I am using a gridview with a datasource and I pass the query to the datasource and it displays in the grid view. However, our company has expressed a need to migrate reporting to SSRS.
Is there any way that I can use dynamic sql with a template report and feed the dynamic sql to it so that all I would have to do is write a single rdl or rdlc and pass it the sql?
Alternatively, is there a way to have One ReportViewer show multiple parameterized reports. Ie. User selects the report from a dropdown and then selects the parameter options from other dropdowns and when they click "get report" it loads the chosen report with the parameters?
Thanks in advance.
Hi,
1. I have one combobox for supplierID, it displays 1,2,3...
Now i want to display the corresponing SupplierDescription in the textbox placed in the Page Header Section. If it is multiple selection then it has to be seperated by ',' (Comma).
Ex: IF i select 1,2,3 in the combobox then in the TextBox should look like
Suplliers: Ram, Don, Krish
Can you please help me in this
Thanks
Dinesh
What are the options to create a table of contents based on the report items in a List Control? Document Mapping works for online viewing. A table of content would make the report easier to read when it's printed.
Any help is much appreciated. Thanks.
I am using the HierarchyID datatype for my requirement to manage the hierarchy structure. I found it very useful in maintaining the structure in the table with the levels.
I am looking to develop an SSRS report to generate this tree structure. I couldn't find anything relevant todo this using HierarchyID.
I found Parent child hierarchy in SSRS using recursive hierarchy method which was not using the HierarchyID datatype.
I created two reports in SSRS and have configured both the web service and report manager URLs in report services configuration manager.
whenever I try to open either one of the two reports from the manager or service I get the following error msg.
"An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database.
(rsReportServerDatabaseError)
Invalid object name 'DataSets'. Could not use view or function 'ExtendedDataSets' because of binding errors."
I get a similar msg when I try to deploy the reports from VS 2010. Only the first 2 sentences are returned.
I'm mystified as to why DataSets is an invalid object name. It shows as the TargetDatasetFolder name WebsiteReports Property Page. I've looked around for the error source and can not find where this error is stemming from.
Below is a picture of my report format. It's the yellow column in trying to calculate which is basically a subtraction between the 7th Column (which is based on the date selected by the user in the parameter) and column 6 which is the day before.
View 1 Replies View RelatedIn ssrs preview tab and When i export to excel i am getting the rows wrapped up (Please see current output below) but i want LOB and description in each row (Please see Expected output below).
LOBdescription statusJan-15Feb-15Mar-15Apr-15May-15Jun-15Jul-15
CFC RISK DO NOT USE - HIPAA 278 - INPATIENT APPROVED 1
CLOSED 147831007311326048
INPROCESS 16
DO NOT USE - HIPAA 278 - OUTPATIENT CLOSED 1
Behavioral Health APPROVED 262516222015
CLOSED 853422
DENIED 51232
[code]....
The objective is to identify orders where an order fee has been applied incorrectly. I have multiple orders per customer, my table contains an orderID and a customerID. Currently if the customer places additional orders before the previous orders have been closed/cancelled, then additional fees are being applied.
Let's say I'm comparing order #1 to order #2. I need to identify these rows where the following is true:-
The CustID is the same.
Order #2 has a more recent order date.
Order #2 has a FeeDate Before the CancelledDate of Order #1 (or Order #1 has no cancellation date).
So in the table the orderID:2835692 of CustID: 24643 has a valid order fee. But all the subsequently placed orders have fees which were applied before the first order was cancelled and so I want to update the FeeInvalid column with a 'Y'. The first fee will always be valid.
I think I understand why the code I am trying doesn't achieve the result I want but I can't figure out how to write it correctly. Below is one example of code I've tried and also code to create the table and insert some test data.
update t1
SET FeeInvalid = 'Y'
FROM MockData t1 Join MockData t2 on t1.CustID = t2.CustID
WHERE t1.CustID = t2.CustID
AND t2.OrderDate > t1.OrderDate
AND t2.FeeDate > t1.CancelledDate
CREATE TABLE [dbo].[MockData](
[OrderID] [float] NULL,
[code]....
I have a report which runs for last 12 months data. Since this is going to be last 12 months the column headers change every month. How can we implement this with dynamic column headers in the dataset?
View 9 Replies View RelatedI work on test SSRS setup and trying to give one user enough rights so she can download RDLs from server, but no matter what I do on Folder leverl, on report level her security are still only as a <Browser>. Structure of our Server is:
Home/NewReports/Misc/Report01.
I'm checking those in <Folder Settings>/<Security> where this user is OK (Browser, Content Manager, Publisher, Report Builder).
So she looks OK in all folders Home/NewReports/Misc, but on report level she still only a browser.
Our db team tried everything on SSRS server working with Site settings and Folder option, how to make that report inherit security ?