I'm trying to find out less than 10% in revenue accounts from a table. Below is a snapshot. Basically, I want to add Revenue mix column in the table using procedure.
ACCOUTSREVENUEREVENUEMIX
ACCOUNT1 100 2%
ACCOUNT2 200 4%
ACCOUNT3 500 9%
ACCOUNT4 1000 19%
ACCOUNT5 1500 28%
ACCOUNT6 2000 38%
TOTAL 5300 100%
know a way to find all stored procedures that use declared or temp tables, i.e
Declare @temptable TABLE as....
Create table #temptable
I can easily find user created stat in a databaseSELECT * FROM DB.sys.stats WHERE user_created=1But how do I determine what tables those stats are in? with over 6000 tables I don't feel like looking through all the tables.
View 2 Replies View RelatedInstalled sql server 2012 enterprise. Runs with the built in account fine.
I tried entering a domain account to run as the service account from sql configuration it fails with the error "the specified network password is not correct".
I tried from services.msc and entered successfully but when I try to restart it fails that the log in credentials are wrong.
the domain account and password I entered are just fine. What's it I should do or missing?
This is the 1st time we are building a active/passive cluster with 1 node each. we usually install default instance and setup domain account as service account which will have an spn delegated. Now for active/passive cluster is it ok to use same domain account as service account for both clusters with both creating as default instance again as the windows was built as SERVER1 and SERVER2.
View 4 Replies View RelatedI cannot get a consistent answer as to how many domain accounts would be suggested in a SQL Server 2014 installation. Previously the recommendation was a separate account for each service to provide isolation and minimum permissions for each account. It seems from what I've read that a single domain account would have something added to make it unique from SQL Server's perspective. Several still advocate multiple accounts. I don't know if they are doing so because that's the way it's always been done or if there is still some compelling reason to do so. I don't want to create unnecessary accounts simply because something is "ideal."
View 8 Replies View RelatedDo we still need the below service accounts in SQL 2008+ version even if we have proper SQL service accounts added in the logins?
[NT AUTHORITYSYSTEM]
[NT ServiceMSSQLSERVER]
[NT SERVICEReportServer]
[NT SERVICESQLSERVERAGENT]
[NT SERVICESQLWriter]
[NT SERVICEWinmgmt]
I setup SQL Server 2012 on Windows Server 2012 with the service accounts in the local Administrator group, but now that I'd like to remove the accounts from this group I'm finding they don't have the appropriate access to the network storage. notes on setting the per-service SID's for SQL (SQL Engine, Analysis Services, Reporting Services, and Agent Service) so they can read the Data, Log, and TempDB mount points?
View 2 Replies View RelatedHi everybody!
Is there any way that I could achieve displaying the revenue grouped by a month?
I've got the following fields in order table:
DateClosed,
StartDate,
EndDate,
OrderValue
The fiscal year starts in march and ends in feb.
I know how to calculate the year's revenue but I have got difficulties in spreading it over the months.
Any thoughts?
Thanks in advance.
Hi All Experts,
I need to show a result of a revenues total for Monthly,Quarterly, and YTD of a given sales person by a given period.
e.g
Period : 7-1-2006 to 8-1-2006
Sales Person Monthy Quarter YTD
SalesPerson1 $1999 $10000 $100000
SalesPerson2 $1999 $10000 $100000
How can i do that?
Thanks in advance.
While running SQL Server Profiler I reached some Lock:Escalations. When I searched for Statements having same SPID as Lock:Escalation event I realized that one of delete statements causes this. Is there any way to find out why lock escalation in such place occurres?
Statement is like:
delete from BOOK_IN_LIBRARY where libraryId in (,,,,); <-20 elements ids
CREATE TABLE BOOK_IN_LIBRARY(
[libraryId] [bigint] NOT NULL,
[bookId] [bigint] NULL,
[otherData] [bigint]NULL,
[otherData2] [int] NULL,
[Code] ....
I am trying to create a query that will show how much revenue that we have recieved from a customer After the first invoice and I'm having a difficult time creating a query to do it.. I have a customer table and a sales table joined by custno.
SELECT Customer.LastName, Sales.InvDate, Sales.AmtChargeFROM Customer INNER JOIN Sales ON Customer.CustNo = Sales.CustNo
The output I'd like is
CustNo, LastName, FirstInvoiceAmount, LifeCycleAmount
Getting the first inv date seems straight forward
SELECT Customer.CustNo, MIN(Sales.InvDate) AS FirstInv FROM Customer INNER JOIN Sales ON Customer.CustNo = Sales.CustNo GROUP BY Customer.CustNo
However getting the amount of that first inv and then getting the sum of all invoices not including the first invoice has me scratching my head.
Can anyone point me in the right direction?
I have a requirement (motivated by a SOX thing) that is just giving mefits. I know it should be easy and I'm probably overthinking it, but Ijust can seem to find the best way to get where I need to go.I have some payment projection data derived from a huge procedure thatI'm dumping into a temp table that looks like looks this:Key Pd Start End AnnualAmt MonthAmt DailyAmt6789 1 2005-06-01 2010-05-31 49,500.00 4,125.00 135.6164386789 2 2010-06-01 2015-05-31 54,450.00 4,537.50 149.1780826789 3 2015-06-01 2020-05-31 59,895.00 4,991.25 164.0958906789 4 2020-06-01 2024-05-31 65,884.50 5,490.38 180.505479(there are actually 6 levels of keys, but you get the idea)I need it to get into a reporting table looking like this:Key Rev Year ProjectedAmt6789 2005 29,021.926789 2006 49,500.006789 2007 49,500.006789 2008 49,500.006789 2009 49,500.006789 2010 20,478.086789 2010 31,924.116789 2011 54,450.006789 2012 54,450.006789 2013 54,450.006789 2014 54,450.006789 2015 22,525.886789 2015 35,117.406789 2016 59,895.006789 2017 59,895.006789 2018 59,895.006789 2019 59,895.006789 2020 24.779.10etc...I'm having a problem wrapping my head around how to get the rows in themiddle of each period.The other, probably minor and statistically insignificant, issue isproration on a leap year. If a proration occurs on a leap year and Ihave to calculate the proration based on a DATEDIFF and an Annual orMonthly Amount, I'm going to be a day over.Anybody have any tricks or ideas???Thanks so much for your help!Jody
View 3 Replies View RelatedI need to do some clean up activities in my databases... So i intended to drop unwanted tables and views.
for that I need to find, whether the table being used by any other objects ?
How could I achieve it?
I need to be able to identify breaks in a sequence so I can evaluate the data more correctly. In the sample I have given I need to be able to identify the break in sequence at 69397576, ideally I would set that as a D. My query also needs to recognize that the 3 sequences following 69397576 are sequential and would belong to that set. so the out come would look like this.
id file_name page_follow
693975631555557564_22222221114014810D
693975641555557564_22222221114014810F
693975651555557564_22222221114014810F
693975661555557564_22222221114014810F
693975671555557564_22222221114014810F
693975681555557564_22222221114014810F
693975691555557564_22222221114014810F
693975761555557564_22222221114014810D
693975771555557564_22222221114014810F
693975781555557564_22222221114014810F
693975791555557564_22222221114014810F
here is some test data.
create table test1 (id INT
, [file_name] VARCHAR(100)
, page_follow CHAR(1));
go
[code]....
Is there a query that I can run which will give me a list of users that have tried to use SQL resources for which they do not have permissions?
View 1 Replies View RelatedThe following is sample data I am dealing with.
SELECT * INTO TEMP
FROM
(SELECT 'AAAAA' AS CATEGORY, 'A1000' AS CODE, '01-01-2014' AS STARTDATE, '01-31-2014' AS ENDDATE
UNION
SELECT 'AAAAA' AS CATEGORY, 'A1000' AS CODE, '02-01-2014' AS STARTDATE, '02-28-2014' AS ENDDATE
UNION
SELECT 'AAAAA' AS CATEGORY, 'A1000' AS CODE, '03-01-2014' AS STARTDATE, '03-31-2014' AS ENDDATE
UNION
SELECT 'AAAAA' AS CATEGORY, 'A2000' AS CODE, '04-01-2014' AS STARTDATE, '04-30-2014' AS ENDDATE
UNION
SELECT 'AAAAA' AS CATEGORY, 'A1000' AS CODE, '05-01-2014' AS STARTDATE, '05-31-2014' AS ENDDATE) X
I need to extract the date that the value in CODE column changes to another code for each value of CATEGORY and if there is no change, to record the original CODE value and its startdate for each CATEGORY.
I'm trying to come up with a query for this data:
CREATE TABLE #Visits (OpportunityID int, ActivityID int, FirstVisit date, ScheduledEnd datetime, isFirstVisit bit, isRepeatVisit bit)
INSERT #Visits (OpportunityID, ActivityID, FirstVisit, ScheduledEnd)
SELECT 1, 1001, '2014-08-17', '2014-08-17 12:00:00.000' UNION ALL
SELECT 1, 1002, '2014-08-17', '2014-08-17 17:04:13.000' UNION ALL
SELECT 2, 1003, '2014-08-18', '2014-08-18 20:39:56.000' UNION ALL
[Code] ....
Here are the expected results:
OpportunityIDActivityIDFirstVisitScheduledEndisFirstVisitisRepeatVisit
110012014-08-172014-08-17 12:00:00.00010
110022014-08-172014-08-17 17:04:13.00001
210032014-08-182014-08-18 20:39:56.00001
210042014-08-182014-08-18 18:00:00.00010
[Code] ....
Basically I'd like to mark the first Activity for each OpportunityID as a First Visit if its ScheduledEnd falls on the same day as the FirstVisit, and otherwise mark it as a Repeat Visit.
I have this so far, but it doesn't pick up on that the ScheduledEnd needs to be on the same day as the FirstVisit date to count as a first visit:
SELECT*,
CASE MIN(ScheduledEnd) OVER (PARTITION BY FirstVisit)
WHEN ScheduledEnd THEN 1
ELSE 0
END AS isFirstVisit,
CASE MIN(ScheduledEnd) OVER (PARTITION BY FirstVisit)
WHEN ScheduledEnd THEN 0
ELSE 1
END AS isRepeatVisit
FROM#Visits
Is it possible to find the version details from IP and Port.
For example I have IP and port number known to me ,but I don't have database credentials and other details.
I want to know which version of Sql server is running.
My purpose is to find the false vulnerabilities in security scanning.
How do you find stale stored procedures ?
In a scenario where a developer created a slight modification of a stored procedure because he was afraid of breaking something else and took the easy way out, and a few more later down the line, multiple versions of a stored proc. doing slightly different things are just laying around.
"Last used" would be useful piece of information to determine the most recent date a stored procedure was called, either by the application itself or by another stored procedure itself called by the application.
Any stored proc not used for more than say 6 months would then be identified as a candidate for clean-up.
So - short or creating - after the fact - a trigger to update the usage date upon each call - which means a lot of work and no result for the next six months, how can one go about this ?
And could this be done in SS2K8 ?
I am trying to build a select statement that will
1). find records where a duplicate field exists.
2.) show the ItemNo of records where the Historical data is ' '.
I have the query which shows me the duplicates but I'm stuck when trying to only show records where the Historical field = ' '.
Originally I thought I could accomplish this goal with a sub query based off of the original duplicate result set but SQL server returns an error.
Below you will find a temp table to create and try in your environment.
create table #Items
(
ItemNovarchar (50),
SearchNo varchar (50),
Historical int
[Code] ....
Ultimately I need a result set that returns 'ATMR10 MFZ N', and 'QBGFEP2050 CH DIS'.
I've got a fairly large hierarchy table and I'm trying to put together a query to find the lowest level descendants of the hierarchy. I think there must be some way to use the "Breadth-first" approach that's stated in the MSDN technet sites about SQL Server HierarchyID but i'm not sure how to write the necessary T-SQL to traverse that. I know I can get all the descendants of a parent node like this
SELECT *
FROM AdventureWorks2012.HumanResources.Employee
WHERE OrganizationNode.IsDescendantOf(@ParentNode) = 1
However, this query returns all levels for that parent's branch. If I just wanted list of employees that were at the lowest level of the branch(es) for this parent node, how would I do this?
I am trying to calculate how much revenue we may get, based on potential new business opportunities. The core fields we have are
Total Contract Value ($ or £)Duration of contract (months)Revenue start dateVarious information about the new business - ID, Title, Customer etc.
We can easily calculate the revenue per month with "Total Contract value divide by duration".
However what I would really like to do is be able to know how much revenue we will be getting each month.
To do this I was thinking we should probably create a new row for each month entry, with the mm-yyyy being the only difference for each row. But how to create the appropriate months and the correct amount of rows.
There are many duplicate records on my data table because users constantly register under two accounts. I have a query that identify the records that have a duplicate, but it only shows one of the two records, and I need to show the two records so that I can reconcile the differences.The query is taken from a post on stack overflow. It gives me 196, but I need to see the 392 records.
How to identify the duplicates and show the tow records without having to hard code any values, so I can use the query in a report, and anytime there are new duplicates, the report shows them.
SELECT
[groom_first_name]
,[groom_last_name]
,[bride_first_name]
,[bride_last_name]
[code]....
I have 2 tables with 2 fields in common between them. How do I get a count of rows in table 1 but not in table 2 matching those 2 fields? Thanks.
I have a script that creates these spin off tables (used for lightning fast access) on a near daily basis. But it is possible the table does not exist for that day - in which the script need to check one day back - so on and so forth until finding the most recently created table.
The script I have written fails with overflow error.
I was hoping someone could tell me the correct syntax to accomplish this and also why i recieve this overflow error...
Code:
Dim str_SQL_Asset_1
daysBack = 1
tblFound = FALSE
Dim xbl_Holdings_date
Dim xMonth
Dim xDay
xbl_Holdings_date = date()
If Len(Month(xbl_Holdings_date))=1 Then
xMonth = "0" & Month(xbl_Holdings_date)
Else
xMonth = Month(xbl_Holdings_date)
End If
If Len(Day(xbl_Holdings_date))=1 Then
xDay = "0" & Day(xbl_Holdings_date)
Else
xDay = Day(xbl_Holdings_date)
End If
DO WHILE tblFound = FALSE
xbl_Holdings_Name = "xbl_Holdings_" & Year(xbl_Holdings_date) & "_" & xMonth & "_" & xDay
SQL_tblCheck_STR = "SELECT * FROM INFORMATION_SCHEMA.TABLES " & _
"WHERE table_name = '" & xbl_Holdings_Name & "' "
Set MM_checkCmd = Server.CreateObject("ADODB.Recordset")
MM_checkCmd.ActiveConnection = conn_str_ClientDB
MM_checkCmd.Source = SQL_tblCheck_STR
MM_checkCmd.CursorType = 0
MM_checkCmd.CursorLocation = 2
MM_checkCmd.LockType = 3
MM_checkCmd.Open()
IF MM_checkCmd.EOF Then
xbl_Holdings_date = (xbl_Holdings_date - daysBack)
daysBack = daysBack + 1
tblFound = FALSE
ELSE
tblFound = TRUE
MM_checkCmd.CLOSE()
SET MM_checkCmd = Nothing
END IF
loop
The goal of this snippet is simply to identify and set the value for the existing table name.
An example table name would be "xbl_Holdings_2006_12_10".
I could have posted this question in the VB forum but I would like to push as much of the work onto SQL as possible and also - this sort of operation is more likely to be required of a dba imo.
Is there a way i can create a query that gives me a list of all the table names in the database?
View 2 Replies View RelatedI'm trying to find the primary key on a given table in SQL Server 2000 using SQL. I'm querying the sysobjects table to find a given table, and then querying the sysindexes table. I've ALMOST found what I'm looking for. I see the indexes and columns etc. on the tables in the database, I just don't see the field that indicates that the index is the primary key.
Can anyone help?
Thanks, Alex
Hi All,
Do any of you know how I can find the size of a table in SQL server?
Cheers
Dave
I'm fairly new to sql.I've got a database that all I want to do is view some records fromsome tables. But the thing is, I do not know the table names ortheir relationships.I've got access to the database thru query analyzer. Can someoneassist me in gettign the correct statements that will allow me to findout what tables exist in the database.
View 4 Replies View RelatedWhen I open a table and need to make a change within a particular record...
How do I find the particular row that I am looking for? I seem to have to scroll through 600 records to find the one I need. I've found a search and replace function but it doesn't seem to work.
Thanks I appreciate any advice you can give me.
I'm new here so bare with me for alittle bit.
When I go to a website how to I find out the table names in the data?
I mean how can I do "select * from ___" if I don't know the table name.
Thank you for any help,
S_R_S
Need some suggestions on what to check or look for.My stored proc is not finding the table in the sql db. This is the error...Invalid object name 'tblServRec'I use the same function to pass in an arraylist and the sp name for another sp and that one works ok.The sp is the same as another one except for the table name and that one works ok.The sp works fine on my local machine. It finds the table ok. But when I try it on the server, it doesn't work.I have checked permissions, and they are the same for all tables, even the one that the other sp works ok on the server.Here is the sp if that will help.....CREATE PROCEDURE dbo.deleteServRec
@fldNum INT ASBEGIN DECLARE @errCode INT
DELETE FROM tblServRec WHERE fldNum = @fldNum SET @errCode = 0 RETURN @errCode
HANDLE_APPERR:
SET @errCode = 1 RETURN @errCodeENDGOThanks all,Zath