how to change the first <TD> to add BGCOLOR in this script:
declare @body varchar(max)
-- Create the body
set @body = cast( (
select td = dbtable + '</td><td>' + cast( entities as varchar(30) ) + '</td><td>' + cast( rows as varchar(30) )
[code]...
Trying to determine what the minimum permissions i can grant to a user so they can see the change tracking data
View 1 Replies View RelatedI would like to get extract the first row of some time based data where any of the other values changes. For example, in the following 10 rows
ABDTE
112015-01-01
112015-01-02
112015-01-03
212015-01-04
112015-01-05
1NULL2015-01-06
1NULL2015-01-07
212015-01-08
212015-01-09
222015-01-10
I want to remove the rows where A and B are the same as on the previous row. So rows 2, 3, 7 and 9 should be eliminated. Note that A and B can have the same values multiple times, just not in succession in the extract. I've tried ranking but I can't figure out how to keep it from lumping all the values of A and B in the same group. The following incorrectly eliminates rows 5 and 8:
;with data as (
select 1 as A, 1 as B, '2015-01-01' as DTE union
select 1 as A, 1 as B, '2015-01-02' as DTE union
select 1 as A, 1 as B, '2015-01-03' as DTE union
select 2 as A, 1 as B, '2015-01-04' as DTE union
[Code] .....
Of course the real data has many columns and multiple data types that can have nulls. I just want get the row when anything changes. Is there a slick way to do this in SQL?
Our client is asking to display the 'parameter panel in right side of the report' insted of top.
how can I do this?
What issues will I encounter if I change the MSSQLSERVER password?
View 2 Replies View RelatedI create a db by following code. Now I want to change name of FILEGROUP. How can I do it?
CREATE DATABASE MyDb
ON
PRIMARY ( NAME = MyDat,
FILENAME = 'c:datamydat.mdf'),
FILEGROUP MyGroup CONTAINS FILESTREAM( NAME = My,
FILENAME = 'c:datamy1')
[Code] .....
I create a db by following code. now i want to change name of FILEGROUP. how can i do it?
CREATE DATABASE MyDb
ON
PRIMARY ( NAME = MyDat,
FILENAME = 'c:datamydat.mdf'),
FILEGROUP MyGroup CONTAINS FILESTREAM( NAME = My,
[Code] .....
How to reset the value of the change tracking anchor id?
CHANGE_TRACKING_CURRENT_VERSION()
It's a bigint that increments on every DML operation and I just wondered how you could reset it back to zero. Turning change tracking off and on doesn't seem to do it.
it runs over night, pulls 10.5m rows. Inserts into a table, from a select (so "insert...select", rather than "select into"), from many tables, grouping on a max. It's complex. During the day, it runs fine - maybe 25 minutes. At night it *sometimes* runs fine, but then sometimes takes 4hours.Checking this morning there were 230 threads open for this one query. Checking sys.dm_os_tasks and sys.dm_os_waiting_tasks there were no other wait types on that session_id. None at all. Checking activity monitor, most of the existing threads were suspended on the insert.
There are 24 cores, but NUMA'd. We have maxdop on the server of 8. The maxdop option on the query is 12, just to speed up the select. Index and Stats refreshed daily. We've eight identical tempdb data files, on a separate spindle. Checking those, they are filling up using the round robin correctly
Would the delay be due to SQL trying to combine so many 'select' threads into one 'insert' thread (as it can't insert in parallel; 2014 can, apparently. Upgrades not available!)Should i change the SP to run the select into a temp table (table variable?) with a maxdop of 12, then do the insert into the actual table using a maxdop of 1. Checking the execution plans for a table variable implies the subtree cost comes down from 2.5m to 357k. What's best - temp table or table variable?
How to change the sql service passwords on a SQL 2012 cluster.
View 3 Replies View RelatedAs the title suggests we are looking to change the service account of a SQL mirror implementation. I will be using the same account on all 3 servers involved in the configuration.
I know each server requires the account of the other two adding but as this will be the same account I assume this doesn't apply?
Also for mirrored databases already set up would I need to reconfigure the security for each one?
Is there anything I am missing?
What would be the best process to change the datatype of ntext fields.
I assume just changing the datatype - is not the way to go?
I like to backup the stored procedures' code used in my databases. So I created this Script:
/*
IF OBJECT_ID('[Monitor].[dbo].[Procedurecode]') IS NOT NULL DROP TABLE [Monitor].[dbo].[Procedurecode];
*/
DECLARE
@db nvarchar(50),
@strSQL nvarchar (100)
IF CURSOR_STATUS('global','cur1')>=-1 BEGIN DEALLOCATE cur1 END
[code]....
Problem is (and I seem not to be the only one with tis) described here:
"If the executed string contains a USE statement that changes the database context, the change to the database context only lasts until sp_executesql or the EXECUTE statement has finished running." There is nothing magical in SQL server that knows you intend a series of dynamic sql commands to be part of a single job running in a single context. You have to build the entire string for the job you want to execute."
[URL]
So I only get the SPs of the current database.
How do I change the file path from C: drive to E:
See attached
did VARCHAR(20)
SELECT top 10 CAST(did AS INT) FROM table
Msg 245, Level 16, State 1, Line 3
Conversion failed when converting the varchar value 'cht6p575l7ry61k1npt' to data type int.
SELECT CONVERT(INT, did) FROM table
Msg 245, Level 16, State 1, Line 5
Conversion failed when converting the varchar value 'cht6p575l7ry61k1npt' to data type int.I found a SQL Function that removes all the alphabetic characters from the string and just leaves the integers.
How can we change the backup replica in Always on Cluster. I am not able to take backup because of this.
View 7 Replies View RelatedWe have 2 node sql 2012 cluster and we have a scenario where domain,IPs,Hostanmes and SQL network name are changing.
1> Can SQL cluster role be brought online by changing the sql network name and its IP once windows team reconfigure the OS cluster or there will be any challenges.
2>should I uninstall sql cluster on both nodes then windows will destroy OS cluster and they then they need to change IP,hostname and domain and then fresh installation of sql cluster
Version: SQL SERVER 2012 enterprise edition and SP2.
Due to one of the security reason, I have changed default port 1433 to another port number in configuration manger tools->protocols for MSSQLSERVER->TCP/IP --> IP ALL section mention another port number.
After restarted service, SQL SSMS able to connect server itself and new port number also LISTENING.
But SQL client SSMS not connected to one of the PC side after changing default port.
I am in process to develop TSql code to identify change in data.
I read about Binary_checksum and hashbyte. Some people say hashbyte is better than binay_checksum as chances of collision are less.
But if we may consider following, chances exist in hashbyte too. My question is what is the best way to compare data to identify change (I can't configure CDC) ?
select HASHBYTES('SHA','121'+'34'), HASHBYTES('SHA','12'+'134'),BINARY_CHECKSUM('121','34'),BINARY_CHECKSUM('12','134');
in SSIS
( Left(@[User::YourFileName],3) == "AP_" ? 101 : ( Left(@[User::YourFileName],3) == "VD_" ? 102 : ( Left(@[User::YourFileName],3) == "BK_ " ? 103 : 000)))
In the above Variable i want to change the value in Hundreds place i.e from 101,102,103 to 201 ,202, 203 depending upon some Project param
lets say if project param is 1, the values assigned should be as 101,102,103
if project param is 2, the values assigned should be as 201,202,203
if project param is 3, the values assigned should be as 301,302,303 etc...
why when I make a change to a foreach loop container in a SSIS package it does not save?
I am trying to change the base file name and if I change it through either the edit or properties windows, the changes does not save. Fore example i change the Files: or File Spec: from oldfile*.txt to newfilename*.txt and when I save and og bak into the edit area to confirm the change, the Files: section shows as "oldfile*.txt.
I keep getting requests to increase the width of a varchar colum every now and then.
I want to ask if its perfectly ok when you have active users connecting to the application to do this?
I store files in db in sql server 2008 by filestream. But when a column would be added to table which have filestream, properties of table would be changed. by every things change on table, retrieve files will faced to error. but store process work probably.
and filestream filegroup at following address will be empty. why?
Right click on table --> properties --> storage --> filestream filegroup
I have a table with a datetime and an Item column.
I want to retrieve only the rows where item didn't change for a given value.
In the example below, given the value of 5 I only want the rows starting at 19:14:50 to 19:26:06.
Dateteime Item
2015-06-05 19:05:03.0002
2015-06-05 19:08:31.0002
2015-06-05 19:14:50.0001
2015-06-05 19:19:33.0001
2015-06-05 19:20:46.0001
[Code] ....
In an existing SSRS 2012 report, I have a requirement for a user to be able to select by multiple school(s) and/or multiple grade(s). This is fine except certain schools like elementary have grade levels of KG to 06, Middle school has grades of 06 to 09 and high school has grades of 10 to 12. Thus for example, if a user has initially selected grades 11 and 12 and then they select an elementary school that has grades KG through 06, the 'grade level' selection would need to change.In other words, I am thinking of initially having the available and default values for the parameter called 'Grade' set to KG through 12. However if a school is selected that only has specific grade levels like elementary school, how can I override the original grade level and only allow the user to select grades that the particular school contains?
View 3 Replies View RelatedI need to extract a price from a package solution table that was current on a certain date.
Columns are:
Product_Reference int,
Change_Date int, -- Note that this is in yyyymmdd format
Price decimal
So for one items you would get
Product_ReferenceChange_DatePrice
100014200401281.59
100014200605131.75
100014200802121.99
100014200906252.35
100014201002242.50
100014201107151.10
100014201205151.15
The challenge is to return the price of the item on 20070906. In this example 1.75.
I've tried joining it to itself
SELECT DISTINCT p1.[Product_Reference]
,p1.[Change_Date]
,p1.[Price]
FROM PHistory p1
INNER JOIN PHistory p2
ON p1.Product_Reference = p2.Product_Reference
WHERE p1.Product_Reference = 100014
AND p1.Change_Date >= 20070906
and p2.Change_Date < 20070906
But it returns the price above and below that date.
We were recently acquired and need to move our existing SSRS 2012 mail server from our internal SMTP service. The internal service doesn't need to have a 'real' account to send email out. Everything seems to be setup and running under the internal service.I think I need to change the Email Settings information in "Reporting Services Configuration Manager". Namely the Sender address and SMTP Server fields. But without actually making these changes, I don't see where it is going to ask for the password. Really hate to make changes on a production server.
Do I need to change the "Log On As" account in the "SQL Server Configuration Manager" as well? If so, does this need to be the same account as used in the Sender Address (above)?. there is a lot of ink about making additions to the "rsreportserver.config" file. Our existing file does not have any of these entries.
How to change encoding in SSRS from UTF8 to SJIS for export to CSV. Is it possible or not.
View 3 Replies View Relatedis there a way to change SSMS 2012 default query save location?
Scenario:
1. Open SSMS
2. Create new query
3. Click Save
I see "DocumentsSQL Server Management Studio" folder, but I want to change it to be "d:". How do I do this?
I tried:
1. [URL]- in folder "DocumentsSQL Server Management StudioSettingsSQL Server Management Studio" there is a file NewSettings.vssettings, setting it to "d:" or "d:" didn't work.
2. Changing HKEY_CURRENT_USERSoftwareMicrosoftMicrosoft SQL Server100ToolsShell VisualStudioProjectsLocation didn't work too. There is no "Shell" under "110Tools"
Did I do something wrong, or is there another way?
I get the following error message when a job calls a Stored Procedure that TRUNCATES a Table:
Cannot truncate table 'CombinedSurveyData' because it is published for replication or enabled for Change Data Capture
Is my only option to change the TRUNCATE to DELETE?
[URL]
We are planning to convert or change all existing Traces to Extended Events in SQL server 2012. What is the procedure to convert custom traces. We have already created some below custom traces: like this we are planning to convert for all servers.
exec sp_trace_setevent @TraceID, 20, 23, @on
exec sp_trace_setevent @TraceID, 20, 8, @on
exec sp_trace_setevent @TraceID, 20, 12, @on
exec sp_trace_setevent @TraceID, 20, 64, @on
exec sp_trace_setevent @TraceID, 20, 1, @on
exec sp_trace_setevent @TraceID, 20, 21, @on
[code]...
I am using SQL Server 2012 and to me a part of data captured by CDC is not making sense.
I have a table called 'Schema.Table1', and I enabled CDC on it by running 'sys.sp_cdc_enable_table'. I see that a table called 'cdc.Schema_Table1_CT' got created which now gets an entry when ever I Insert, Update or delete a record in the original table.
Till this point every thing works fine.
My original Table has a NOT NULL INT column called 'AuditTrackerUserID' with a default value of 1996. My application does not provides a value for this column, but because the column itself has a default value, records get inserted without error.
When I try to execute the following Query I see multiple records with __$operation of 3 and 1.
SELECT * from cdc.Schema_Table1_CT where AuditTrackerUserID IS NULL
My expectation is that I should not ever see any record returned by this query because AuditTrackerUserID is a not null column, but I do.
Can a user of db owner role of a database change the databse option to read only and read-write?If not what permission I need to grant to the user?
View 1 Replies View Related