SQL 2012 :: How To Resolve IP Conflict Error While Server Clustering
Dec 8, 2014
I am practicing on vmware 2 node failover cluster for doing Sql failover clustering understanding.I did proper Ad Dc setup and configured san storage through iscsi software that I downloaded from net.I did target and initiator configuration for san storage on same Domain controller vm.Name of target is Target1 and has two initialtor for node1 and node2.It has two virtual disk assigned Quorumdisk.vhd and sqldisk.vhd.ON vmnode1 I have initialzed and formatted my both disk with proper volume and label.
Node which are participating in cluster are node1 and node2.while my windows clustering went fine,while Sql server installation on node 1,i got error IP Address conflict occured.
my DC has IP address:192.168.1.10
my Node1 is 192.168.1.20
node2:192.168.1.30
Cluster IP address is 192.168.1.35
What has cause this situation.What configuration is needed.How do I troubleshoot this problem as now I can not install my sql for clustering as also gave me Invalid network name error.Is my storage configuration not proper or IP address is in correct?Do I need to put my virtual disk in Clustered shared volume?
View 2 Replies
ADVERTISEMENT
May 21, 2007
I'm getting the following errors when trying to execute the following script on the server, its part of the standard asp.net membership and roles, anybody have any ideas how I get get round this?
Msg 468, Level 16, State 9, Procedure aspnet_UsersInRoles_RemoveUsersFromRoles, Line 50
Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Latin1_General_CI_AS" in the equal to operation.
Msg 468, Level 16, State 9, Procedure aspnet_UsersInRoles_RemoveUsersFromRoles, Line 58
Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Latin1_General_CI_AS" in the equal to operation.
Msg 468, Level 16, State 9, Procedure aspnet_UsersInRoles_RemoveUsersFromRoles, Line 84
Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Latin1_General_CI_AS" in the equal to operation.
Msg 468, Level 16, State 9, Procedure aspnet_UsersInRoles_RemoveUsersFromRoles, Line 92
Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Latin1_General_CI_AS" in the equal to operation.
/****** Object: StoredProcedure [dbo].[aspnet_UsersInRoles_RemoveUsersFromRoles] Script Date: 05/20/2007 11:23:33 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER OFF
GO
IF NOT EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[aspnet_UsersInRoles_RemoveUsersFromRoles]') AND type in (N'P', N'PC'))
BEGIN
EXEC dbo.sp_executesql @statement = N'
CREATE PROCEDURE [dbo].[aspnet_UsersInRoles_RemoveUsersFromRoles]
@ApplicationName nvarchar(256),
@UserNames nvarchar(4000),
@RoleNames nvarchar(4000)
AS
BEGIN
DECLARE @AppId uniqueidentifier
SELECT @AppId = NULL
SELECT @AppId = ApplicationId FROM aspnet_Applications WHERE LOWER(@ApplicationName) = LoweredApplicationName
IF (@AppId IS NULL)
RETURN(2)
DECLARE @TranStarted bit
SET @TranStarted = 0
IF( @@TRANCOUNT = 0 )
BEGIN
BEGIN TRANSACTION
SET @TranStarted = 1
END
DECLARE @tbNames table(Name nvarchar(256) NOT NULL PRIMARY KEY)
DECLARE @tbRoles table(RoleId uniqueidentifier NOT NULL PRIMARY KEY)
DECLARE @tbUsers table(UserId uniqueidentifier NOT NULL PRIMARY KEY)
DECLARE @Num int
DECLARE @Pos int
DECLARE @NextPos int
DECLARE @Name nvarchar(256)
DECLARE @CountAll int
DECLARE @CountU int
DECLARE @CountR int
SET @Num = 0
SET @Pos = 1
WHILE(@Pos <= LEN(@RoleNames))
BEGIN
SELECT @NextPos = CHARINDEX(N'','', @RoleNames, @Pos)
IF (@NextPos = 0 OR @NextPos IS NULL)
SELECT @NextPos = LEN(@RoleNames) + 1
SELECT @Name = RTRIM(LTRIM(SUBSTRING(@RoleNames, @Pos, @NextPos - @Pos)))
SELECT @Pos = @NextPos+1
INSERT INTO @tbNames VALUES (@Name)
SET @Num = @Num + 1
END
INSERT INTO @tbRoles
SELECT RoleId
FROM dbo.aspnet_Roles ar, @tbNames t
WHERE LOWER(t.Name) = ar.LoweredRoleName AND ar.ApplicationId = @AppId
SELECT @CountR = @@ROWCOUNT
IF (@CountR <> @Num)
BEGIN
SELECT TOP 1 N'''', Name
FROM @tbNames
WHERE LOWER(Name) NOT IN (SELECT ar.LoweredRoleName FROM dbo.aspnet_Roles ar, @tbRoles r WHERE r.RoleId = ar.RoleId)
IF( @TranStarted = 1 )
ROLLBACK TRANSACTION
RETURN(2)
END
DELETE FROM @tbNames WHERE 1=1
SET @Num = 0
SET @Pos = 1
WHILE(@Pos <= LEN(@UserNames))
BEGIN
SELECT @NextPos = CHARINDEX(N'','', @UserNames, @Pos)
IF (@NextPos = 0 OR @NextPos IS NULL)
SELECT @NextPos = LEN(@UserNames) + 1
SELECT @Name = RTRIM(LTRIM(SUBSTRING(@UserNames, @Pos, @NextPos - @Pos)))
SELECT @Pos = @NextPos+1
INSERT INTO @tbNames VALUES (@Name)
SET @Num = @Num + 1
END
INSERT INTO @tbUsers
SELECT UserId
FROM dbo.aspnet_Users ar, @tbNames t
WHERE LOWER(t.Name) = ar.LoweredUserName AND ar.ApplicationId = @AppId
SELECT @CountU = @@ROWCOUNT
IF (@CountU <> @Num)
BEGIN
SELECT TOP 1 Name, N''''
FROM @tbNames
WHERE LOWER(Name) NOT IN (SELECT au.LoweredUserName FROM dbo.aspnet_Users au, @tbUsers u WHERE u.UserId = au.UserId)
IF( @TranStarted = 1 )
ROLLBACK TRANSACTION
RETURN(1)
END
SELECT @CountAll = COUNT(*)
FROMdbo.aspnet_UsersInRoles ur, @tbUsers u, @tbRoles r
WHERE ur.UserId = u.UserId AND ur.RoleId = r.RoleId
IF (@CountAll <> @CountU * @CountR)
BEGIN
SELECT TOP 1 UserName, RoleName
FROM @tbUsers tu, @tbRoles tr, dbo.aspnet_Users u, dbo.aspnet_Roles r
WHERE u.UserId = tu.UserId AND r.RoleId = tr.RoleId AND
tu.UserId NOT IN (SELECT ur.UserId FROM dbo.aspnet_UsersInRoles ur WHERE ur.RoleId = tr.RoleId) AND
tr.RoleId NOT IN (SELECT ur.RoleId FROM dbo.aspnet_UsersInRoles ur WHERE ur.UserId = tu.UserId)
IF( @TranStarted = 1 )
ROLLBACK TRANSACTION
RETURN(3)
END
DELETE FROM dbo.aspnet_UsersInRoles
WHERE UserId IN (SELECT UserId FROM @tbUsers)
AND RoleId IN (SELECT RoleId FROM @tbRoles)
IF( @TranStarted = 1 )
COMMIT TRANSACTION
RETURN(0)
END
'
END
GO
Thanks
View 2 Replies
View Related
Dec 19, 2013
while using store procedure in report getting error as mentioned below.
Cannot resolve the collation conflict between "Latin1_General_CI_AI" and "SQL_Latin1_General_CP1_CI_AS" in the equal to operation.
View 1 Replies
View Related
Dec 12, 2007
Hello,
I have a distributed query that uses tables located on in SQL Server 2005 and SQL Server 2000? Does anyone know how I can fix the error below?
Thanks a lot for help!
Msg 468, Level 16, State 9, Line 1
Cannot resolve the collation conflict between "Latin1_General_CI_AI" and "SQL_Latin1_General_CP1_CI_AS" in the equal to operation.
View 13 Replies
View Related
May 21, 2007
I'm getting the following errors when trying to execute the following script on the server, its part of the standard asp.net membership and roles, anybody have any ideas how I get get round this? Msg 468, Level 16, State 9, Procedure aspnet_UsersInRoles_RemoveUsersFromRoles, Line 50
Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Latin1_General_CI_AS" in the equal to operation.
Msg 468, Level 16, State 9, Procedure aspnet_UsersInRoles_RemoveUsersFromRoles, Line 58
Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Latin1_General_CI_AS" in the equal to operation.
Msg 468, Level 16, State 9, Procedure aspnet_UsersInRoles_RemoveUsersFromRoles, Line 84
Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Latin1_General_CI_AS" in the equal to operation.
Msg 468, Level 16, State 9, Procedure aspnet_UsersInRoles_RemoveUsersFromRoles, Line 92
Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Latin1_General_CI_AS" in the equal to operation.
/****** Object: StoredProcedure [dbo].[aspnet_UsersInRoles_RemoveUsersFromRoles] Script Date: 05/20/2007 11:23:33 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER OFF
GO
IF NOT EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[aspnet_UsersInRoles_RemoveUsersFromRoles]') AND type in (N'P', N'PC'))
BEGIN
EXEC dbo.sp_executesql @statement = N'
CREATE PROCEDURE [dbo].[aspnet_UsersInRoles_RemoveUsersFromRoles]
@ApplicationName nvarchar(256),
@UserNames nvarchar(4000),
@RoleNames nvarchar(4000)
AS
BEGIN
DECLARE @AppId uniqueidentifier
SELECT @AppId = NULL
SELECT @AppId = ApplicationId FROM aspnet_Applications WHERE LOWER(@ApplicationName) = LoweredApplicationName
IF (@AppId IS NULL)
RETURN(2)
DECLARE @TranStarted bit
SET @TranStarted = 0
IF( @@TRANCOUNT = 0 )
BEGIN
BEGIN TRANSACTION
SET @TranStarted = 1
END
DECLARE @tbNames table(Name nvarchar(256) NOT NULL PRIMARY KEY)
DECLARE @tbRoles table(RoleId uniqueidentifier NOT NULL PRIMARY KEY)
DECLARE @tbUsers table(UserId uniqueidentifier NOT NULL PRIMARY KEY)
DECLARE @Num int
DECLARE @Pos int
DECLARE @NextPos int
DECLARE @Name nvarchar(256)
DECLARE @CountAll int
DECLARE @CountU int
DECLARE @CountR int
SET @Num = 0
SET @Pos = 1
WHILE(@Pos <= LEN(@RoleNames))
BEGIN
SELECT @NextPos = CHARINDEX(N'','', @RoleNames, @Pos)
IF (@NextPos = 0 OR @NextPos IS NULL)
SELECT @NextPos = LEN(@RoleNames) + 1
SELECT @Name = RTRIM(LTRIM(SUBSTRING(@RoleNames, @Pos, @NextPos - @Pos)))
SELECT @Pos = @NextPos+1
INSERT INTO @tbNames VALUES (@Name)
SET @Num = @Num + 1
END
INSERT INTO @tbRoles
SELECT RoleId
FROM dbo.aspnet_Roles ar, @tbNames t
WHERE LOWER(t.Name) = ar.LoweredRoleName AND ar.ApplicationId = @AppId
SELECT @CountR = @@ROWCOUNT
IF (@CountR <> @Num)
BEGIN
SELECT TOP 1 N'''', Name
FROM @tbNames
WHERE LOWER(Name) NOT IN (SELECT ar.LoweredRoleName FROM dbo.aspnet_Roles ar, @tbRoles r WHERE r.RoleId = ar.RoleId)
IF( @TranStarted = 1 )
ROLLBACK TRANSACTION
RETURN(2)
END
DELETE FROM @tbNames WHERE 1=1
SET @Num = 0
SET @Pos = 1
WHILE(@Pos <= LEN(@UserNames))
BEGIN
SELECT @NextPos = CHARINDEX(N'','', @UserNames, @Pos)
IF (@NextPos = 0 OR @NextPos IS NULL)
SELECT @NextPos = LEN(@UserNames) + 1
SELECT @Name = RTRIM(LTRIM(SUBSTRING(@UserNames, @Pos, @NextPos - @Pos)))
SELECT @Pos = @NextPos+1
INSERT INTO @tbNames VALUES (@Name)
SET @Num = @Num + 1
END
INSERT INTO @tbUsers
SELECT UserId
FROM dbo.aspnet_Users ar, @tbNames t
WHERE LOWER(t.Name) = ar.LoweredUserName AND ar.ApplicationId = @AppId
SELECT @CountU = @@ROWCOUNT
IF (@CountU <> @Num)
BEGIN
SELECT TOP 1 Name, N''''
FROM @tbNames
WHERE LOWER(Name) NOT IN (SELECT au.LoweredUserName FROM dbo.aspnet_Users au, @tbUsers u WHERE u.UserId = au.UserId)
IF( @TranStarted = 1 )
ROLLBACK TRANSACTION
RETURN(1)
END
SELECT @CountAll = COUNT(*)
FROMdbo.aspnet_UsersInRoles ur, @tbUsers u, @tbRoles r
WHERE ur.UserId = u.UserId AND ur.RoleId = r.RoleId
IF (@CountAll <> @CountU * @CountR)
BEGIN
SELECT TOP 1 UserName, RoleName
FROM @tbUsers tu, @tbRoles tr, dbo.aspnet_Users u, dbo.aspnet_Roles r
WHERE u.UserId = tu.UserId AND r.RoleId = tr.RoleId AND
tu.UserId NOT IN (SELECT ur.UserId FROM dbo.aspnet_UsersInRoles ur WHERE ur.RoleId = tr.RoleId) AND
tr.RoleId NOT IN (SELECT ur.RoleId FROM dbo.aspnet_UsersInRoles ur WHERE ur.UserId = tu.UserId)
IF( @TranStarted = 1 )
ROLLBACK TRANSACTION
RETURN(3)
END
DELETE FROM dbo.aspnet_UsersInRoles
WHERE UserId IN (SELECT UserId FROM @tbUsers)
AND RoleId IN (SELECT RoleId FROM @tbRoles)
IF( @TranStarted = 1 )
COMMIT TRANSACTION
RETURN(0)
END
'
END
GOAny help appreciated thanks,
View 5 Replies
View Related
Sep 2, 2004
Exception information:System.Data.SqlClient.SqlException: Cannot resolve collation conflict for equal to operation.
Who can tell me how to resolve this problem?
Thx
View 3 Replies
View Related
Dec 19, 2013
While using store procedure in report getting error as mentioned below !
Cannot resolve the collation conflict between "Latin1_General_CI_AI" and "SQL_Latin1_General_CP1_CI_AS" in the equal to operation.
View 2 Replies
View Related
Feb 5, 2006
Hi, I have developed a website in asp.net 2. I have tester it and it is working fine on my computer but when I have uploaded it to my server I'm getting an error message when the user signup. The error occurs when I'm setting the user role to 'members'.
Error line > Roles.AddUserToRole(user.UserName, "members")
The strage thig is that it is working on my computer but not on the server. My home computer and the server are running the same software versions and the website database is the same as well.
To double check that my code is not generating the error I have lonched 'SQL Query Analizer' and executed the folowing code on my database:
NOTE: In my database I have create the user “teeluk12� and a role “members�
aspnet_UsersInRoles_AddUsersToRoles "/", "teeluk12", "members", "5/02/2006 4:44:33 pm"
Once again the code is working on my home computer but not on the server. On the server I'm getting the following error:
Server: Msg 446, Level 16, State 9, Procedure aspnet_UsersInRoles_AddUsersToRoles, Line 76
Cannot resolve collation conflict for equal to operation.
Does anybody know what could cause the error?
Could it be some permissions that I didn't set on my server?
Thanks for my help and suggestions...
Regards,
Gonzal
View 9 Replies
View Related
Apr 10, 2006
Hi,
l've a raw data which contains list of device name and # of wires used, i.e.
DEVICE NAME # of Wires
--------------------- -------------
A 10
B 11
C 17
D 5
A 0
E 0
So l would like to import these data into my table (with device name as primary key) which each device only appear once. If the device name appear twices, then l should ignore device with # of wires = 0. If device name appear twice and # of wires <> 0, then l should log it.
How should l do that in SSIS ?
View 2 Replies
View Related
May 31, 2008
hi allin my local machine there was no problem. however, when i put my database on the the hosting company's database server i got this error System.Data.SqlClient.SqlException:
Cannot resolve the collation conflict between
"SQL_Latin1_General_CP1_CI_AS" and "Latin1_General_CI_AI" in the equal
to operationplease help it's urgent thanks
View 3 Replies
View Related
Aug 10, 2004
Hi, I´m having a critical problem.
I have two databases: persons and cars
In database persons I have a table
named persons_class1 as follows:
person_id char(13) not null [primary key]
name varchar(20) not null
In database cars I have a table
named cars_blue as follows:
car_id char(13) not null [primary key]
model varchar(20) not null
person_id char(13) not null
In my program the initial catalog is: cars
and I´m executing the following SQL:
select cars_blue.model,persons.dbo.persons_class1.name
from cars_blue,persons.dbo.persons_class1
where cars_blue.person_id=persons.dbo.persons_class1.person_id
and the following error occurs:
Cannot resolve collation conflict for equal operation
I also tried like instead of = and the error is:
Cannot resolve collation conflict for like operation
what can I do?
Thanks in advance
Roland
View 1 Replies
View Related
Jul 1, 2004
Anyone bang into that?
RESTORED a 7.0 Datbase CP 52 to a 2k box
Built a "Privacy" db from scratch on 2k box
Looked at some table scripts and got
OHM - sql 7
SQL_Latin1_General_CP1_CI_AS NULL
Privacy - sql 2k
Latin1_General_CI_AS NULL
[
Ran this and got the error...any help?
select * from privacy..privacy_column p inner join ohm.information_schema.tables t ON p.table_name = t.table_name
Server: Msg 446, Level 16, State 9, Line 1
Cannot resolve collation conflict for equal to operation.
Any ideas?
View 11 Replies
View Related
Aug 10, 2004
Hi, I´m having a critical problem.
I have two databases: persons and cars
In database persons I have a table
named persons_class1 as follows:
person_id char(13) not null [primary key]
name varchar(20) not null
In database cars I have a table
named cars_blue as follows:
car_id char(13) not null [primary key]
model varchar(20) not null
person_id char(13) not null
In my program the initial catalog is: cars
and I´m executing the following SQL:
select cars_blue.model,persons.dbo.persons_class1.name
from cars_blue,persons.dbo.persons_class1
where cars_blue.person_id=persons.dbo.persons_class1.per son_id
and the following error occurs:
Cannot resolve collation conflict for equal operation
I also tried like instead of = and the error is:
Cannot resolve collation conflict for like operation
what can I do?
Thanks in advance
Roland
View 8 Replies
View Related
Oct 19, 2004
Hi, I have this error when running a query:
Cannot resolve collation conflict for equal to operation.
but the situation is that I can run the query perfectly with one user (windows user) but using an standar user, I've got the error, as far as I know the collation feature applies to db's an objects not to users, what can I do to run this query with the standar user? both users have the same permission on the db. Below is the query attached.
Thank you
Gabriel
SELECT B.EmpSupervisorId, a.Info_ID as A_Info_ID,
ISNULL(a.Owner_SSO_ID,'') as A_Owner_SSO_ID,
ISNULL(a.Ref_SSO_ID,'') as A_Ref_SSO_ID,
ISNULL(a.Prev_Owner_SSO_ID,0) as A_Prev_Owner_SSO_ID,
ISNULL(a.MgmtTypeFlag,0) as A_MgmtTypeFlag,
ISNULL(a.CurrentStatusID, 1) as A_CurrentStatusID,
ISNULL(a.PrevStatusID,0) as A_PrevStatusID,
ISNULL(C.ConTypeOption, '') as C_ConTypeOption,
ISNULL(CAST(a.Last_Status_Update_Date AS VARCHAR),'') as A_Last_Status_Update_Date,
ISNULL(B.sfBUID,'0') as A_Bus_Group_ID, 0 AS A_Bus_Group_Seg_ID,
ISNULL(a.Organization,'') as A_Organization,
ISNULL(a.ContactName,'') as A_ContactName,
ISNULL(A.Title, '') as A_ContactTitle,
ISNULL(a.ContactComName,'') as A_ContactComName, ISNULL(a.Phone,'') as A_Phone,
ISNULL(a.NatureOfOppID,'') as A_NatureOfOppID, ISNULL(a.DealAmount,0) as A_DealAmount, ISNULL(CAST(a.Cust_Contacted_Date AS VARCHAR),'') A_Cust_Contacted_Date, ISNULL(CAST(a.Lead_Qualified_Date AS VARCHAR),'') A_Lead_Qualified_Date, ISNULL(CAST(a.Tran_Processed_Date AS VARCHAR),'') A_Tran_Processed_Date,
ISNULL(CAST(a.Quote_Accepted_Date AS VARCHAR),'') as A_Quote_Accepted_Date,
ISNULL(CAST(a.Approved_By_HFS_Date AS VARCHAR),'') as A_Approved_By_HFS_Date,
ISNULL(CAST(a.Funded_By_HFS_Date AS VARCHAR),'') as A_Funded_By_HFS_Date,
ISNULL(a.Lead_In_Amount,0) as A_Lead_In_Amount,
ISNULL(a.Cust_Contacted_Amount,0) as A_Cust_Contacted_Amount,
ISNULL(a.Lead_Qualified_Amount,0) as A_Lead_Qualified_Amount,
ISNULL(a.Tran_Processed_Amount,0) as A_Tran_Processed_Amount,
ISNULL(a.Quote_Accepted_Amount,0) as A_Quote_Accepted_Amount,
ISNULL(a.Approved_By_HFS_Amount,0) as A_Approved_By_HFS_Amount,
ISNULL(a.Funded_By_HFS_Amount,0) as A_Funded_By_HFS_Amount,
ISNULL(CAST(CreationDate AS VARCHAR),'') as A_CreationDate,
ISNULL(a.BusType,'') as A_BusType,
ISNULL(a.NonHFS_XLink_ContactName,'') as A_NonHFS_XLink_ContactName,
ISNULL(a.NonHFS_XLink_Bus_ID,'0') as A_NonHFS_XLink_Bus_ID,
ISNULL(a.Comments,'') as A_Comments, ISNULL(a.ExistCustomerID,'') as A_ExistCustomerID,
ISNULL(a.FinancialNeedID,'') as A_FinancialNeedID,
ISNULL(a.CampaignID,'') as A_CampaignID,
(GEC_HFS_CORE.dbo.GetBusinessDays(Last_Status_Upda te_Date, getdate())-1) as BusDateDiff, ISNULL(A.DealTypeID, '') as A_DealTypeID
FROM tblInformation a
LEFT OUTER JOIN GEC_HFS_LM_SSOInfo B ON A.Owner_SSO_ID = B.sfSSOID
LEFT OUTER JOIN tblContactType C ON a.Bustype = C.ConType_ID
WHERE a.CurrentStatusID NOT IN (9, 10, 11) AND
ISNULL(a.isNoChange,'NO') = 'NO' AND ISNULL(a.IsDeleted,'NO') = 'NO' AND
DATEDIFF(DAY, Last_Status_Update_Date, GETDATE())<> 0 AND
ISNULL(a.isNonHFS, 'NO') = 'NO'
ORDER BY A_Info_ID
View 3 Replies
View Related
Dec 16, 2005
I've stumbled across the above error and am a little stuck.I've just installed SQL2000 (sp3) on my PC and restored a database fromour Live server. On a simple Update statement on a #temp table, itfails with the above message. I think I understand what it means andfound some old posts suggesting using the following :select name, databasepropertyex(name, 'collation')from master..sysdatabasesselect serverproperty('collation')All of the databases that are there by default are set to'Latin1_General_CI_AS' and the restored db is'SQL_Latin1_General_CP1_CI_AS'.The live server has all of these set to the 'SQL...' version, but astandard install points to the other. So, how do I change mine to the'newer' setting ? All I need to do is mimic the live environment fortesting and development. There is only me using it, and it's not aproblem to bin it and re-install, or tweak if I need to.I've tried using :ALTER DATABASE Northwind COLLATE SQL_Latin1_General_CP1_CI_ASas a test (thought this was the best example to show), but it failsstating the following :Server: Msg 5075, Level 16, State 1, Line 5The object 'CK_Products_UnitPrice' is dependent on database collation.Server: Msg 5075, Level 16, State 1, Line 5The object 'CK_ReorderLevel' is dependent on database collation.Server: Msg 5075, Level 16, State 1, Line 5The object 'CK_UnitsInStock' is dependent on database collation.Server: Msg 5075, Level 16, State 1, Line 5The object 'CK_UnitsOnOrder' is dependent on database collation.Server: Msg 5075, Level 16, State 1, Line 5The object 'CK_Discount' is dependent on database collation.Server: Msg 5075, Level 16, State 1, Line 5The object 'CK_Quantity' is dependent on database collation.Server: Msg 5075, Level 16, State 1, Line 5The object 'CK_UnitPrice' is dependent on database collation.Server: Msg 5075, Level 16, State 1, Line 5The object 'CK_Birthdate' is dependent on database collation.Server: Msg 5072, Level 16, State 1, Line 5ALTER DATABASE failed. The default collation of database 'Northwind'cannot be set to SQL_Latin1_General_CP1_CI_AS.On the Live server, the Northwind database is set to the 'SQL...'version, so it MUST be do-able somehow.Any pointers would be appreciated.Thanks in advanceRyan
View 7 Replies
View Related
Nov 27, 2007
Hi All,
I have collation defined on one column and default on another being used in where clause. How can I resolve this problem without changing collation in table.
Thanks in advance
Niraj
View 1 Replies
View Related
May 20, 2008
I hit this error when I tried to do something like:
Code Snippet
create table #tempTable (ID int IDENTITY(1,1) NOT NULL ,
column1 varchar(200) NOT NULL)
INSERT INTO #tempTable
Values('test')
create table tempTable (ID int IDENTITY(1,1) NOT NULL ,
column2 varchar(200) NOT NULL)
INSERT INTO tempTable
Values('test')
Select * from #tempTable t
inner join tempTable p
on t.ID = p.ID
where t.column1 = p.column2
After a thorough search on sysobjects and syscolumns, I found the collation problem on database "temp" is set to "Latin1_General_CI_AS"
since it's an system db, I cannot alter. My db also cannot alter because some SP is encrypted, though I cna de-crypt it.
Is that anyway to solve it by running the script??
I tried to do something like:
start /wait setup.exe /qb INSTANCENAME= {my MSSQL 2005 insatnce name} REINSTALL=SQL_Engine REBUILDDATABASE=SAPWD= {my sa password} SQLCOLLATION=SQL_Latin1_General_CP1_CI_AI
but i get no error at Summamry.txt:
Setup succeeded with the installation, inspect the log file completely for status on all the components.
while at "SQLSetup0011__Core.log":
Error: Action "LaunchPatchedBootstrapAction" threw an exception during execution. Error information reported during run:
"C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe" finished and returned: 0
Aborting queue processing as nested installer has completed
Message pump returning: 0
Anyone have any idea?
View 12 Replies
View Related
Jun 27, 2007
Hello,I currently have Table1 and View1.View1 is a query from 2 or 3 tables that works fine on its own.However in my current query if I try to use it...something like...SELECT a.col1, a.col2, a.col3, b.col1, b.col2, b.col3FROM View1 a JOIN Table1 b on a.col1 = b.col1WHERE a.col2 <b.col2 OR a.col3 <b.col3It throws an error "Server: Msg 446, Level 16, State 9, Line 1 Cannotresolve collation conflict for not equal to operation."Clearly I need to use collation between Table1 and View1, But I dontknow where I need to use "COLLATE SQL_Latin1_General_CP850_CI_AI" andhow? this is the collation set on Table1.Thank you!Yas
View 1 Replies
View Related
Oct 14, 2014
I have configured two node cluster environment on vmware with windows 2008 r2 os.I want to configure sql clustering over it.but prior to that I ran failover clustering manager on node V1 to create two node cluster(node v1,node v2 and third node as a domain controller with shared storage using iscsi target).After I successfully created cluster with name SqlClus1 I shut down all my vmware.Now when I start them all and see clustering status I get error RPC server not found and Cluster server can not be connected.On my cluster manager page I see cluster events marked as critical for both nodes.and cluster staus down.
View 2 Replies
View Related
May 14, 2015
Give the Advantages Over SQL SERVER Always on over Clustering....
View 4 Replies
View Related
Jun 26, 2007
I am facing the Follwing error:
Cannot resolve the collation conflict between "Latin1_General_BIN" and "SQL_Latin1_General_CP1_CI_AS" in the equal to operation.
Follwing is my Code:
code]select * from #temp_Table a
where ltrim(rtrim(Model_ID))+''+ltrim(rtrim(Set_Serial_Number)) in
(select ltrim(rtrim(b.Model_SerialNo)) from #temp_Table2 b where b.Auto_Id=1)[[/code]
So Please help me to proper solutions
Thank's
View 1 Replies
View Related
Aug 12, 2015
How to resolve the data inconsistent errors in merge replication ?
View 0 Replies
View Related
Dec 15, 2006
dear friends,
i started using Asp.net for developing webparts, web parts automatically connect to a database to be created and saved in the database.
i had already Sql Server 2005 Express Edition installed so my webpart page ran and automatically created the database "AspNetDb" in the "App_Data" folder.
but when i uninstalled Sql Server 2005 Express Edition and then installed the Sql Server 2005 Enterprise Edition, it gave me the following Error 26 as below :
--------------------------------------------------------- Beginning of Error Message --------------------------------------------------
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. SQLExpress database file auto-creation error:
The connection string specifies a local Sql Server Express instance using a database location within the applications App_Data directory. The provider attempted to automatically create the application services database because the provider determined that the database does not exist. The following configuration requirements are necessary to successfully check for existence of the application services database and automatically create the application services database:
If the applications App_Data directory does not already exist, the web server account must have read and write access to the applications directory. This is necessary because the web server account will automatically create the App_Data directory if it does not already exist.
If the applications App_Data directory already exists, the web server account only requires read and write access to the applications App_Data directory. This is necessary because the web server account will attempt to verify that the Sql Server Express database already exists within the applications App_Data directory. Revoking read access on the App_Data directory from the web server account will prevent the provider from correctly determining if the Sql Server Express database already exists. This will cause an error when the provider attempts to create a duplicate of an already existing database. Write access is required because the web server accounts credentials are used when creating the new database.
Sql Server Express must be installed on the machine.
The process identity for the web server account must have a local user profile. See the readme document for details on how to create a local user profile for both machine and domain accounts.
--------------------------------------------------------- End of Error Message --------------------------------------------------
then when i checked the Machine.config file, i found this....
<connectionStrings> <add name="LocalSqlServer" connectionString="data source=.SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient" /> </connectionStrings>
then i thought it's becoz, of the datasource thing that the Machine.Config file supports by default the default free edition of Sql Server 2005 which is the Sql Server 2005 Express Edition.
but friend in my company we use Sql Server 2005 Enterprise Edition, so can anybody pls guide me and get me out of this soup on helping me to use Sql Server 2005 Enterprise Edition by modifying either 1) Machine.Config File and/or 2) Web.Config file and/or 3) any other way, but please help i want to do this, please......
regards and thanks
Gurjit Singh
View 2 Replies
View Related
Mar 27, 2006
I have just upgraded to SQL Server 2005 from SQL Server 2000.In Microsoft SQL Server Management Studio, when I click on databaseproperties, I receive the following error:-Cannot resolve the collation conflict between"Latin1_General_CI_AS"and "SQL_Latin1_General_CP1_CI_AS" in the equal to operation.(Microsoft SQL Server, Error: 468)Some reference suggest that I can change the database collation byclicking database properties!What can I do?
View 21 Replies
View Related
Oct 23, 2007
Every time I try to add a new row to my table, i get this error which i don't now what it means and how i can correct it, could you please advice. i am using VS 2005 and VB Language
**************The error message
"No row was updated.
The data in row 2 was not committed.
Error source:mscorlib.
Error Message: Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index"
View 3 Replies
View Related
Oct 5, 2015
If Transaction Log Backup fails due to a conflict could it break the Log Chain?
View 3 Replies
View Related
Aug 28, 2014
I want to install sql 2012 in a non-cluster windows servers, then set up Always-on between these 2 servers. Every article mentions Windows Clustering, and we dont have clustering for now.
Can I set up Always On, in a NON_CLUSTER environment?
Also where I can find instructions step-by-step installations of SQL Server 2012 and most importantly ALWAYS-ON.
View 6 Replies
View Related
Apr 24, 2015
What are differences between always on and SQL Server Clustering
View 1 Replies
View Related
Oct 16, 2014
How to remove clustering configuration in windows server 2008 r2 after it shows clustering events as critical and status down...
View 1 Replies
View Related
Apr 11, 2014
Looking for info on ole/requirement of primary and secondary replica under SQL Server 2012 AlwaysOn.
View 4 Replies
View Related
Jun 20, 2015
I have a windows 2012 cluster environment that consists of two SQL servers nodes with Quorum disk configured as witness.
Manual failover between nodes is working fine, however the sql instance virtual is not seeing the Quorum disk.
Moreover the Quorum disk has the same number as another cluster storage disk, is that considered a problem?
When I move the SQL instance from a node to anohter, should the Quorum Disk change ownership as well to that destination node ? if it is not changing ownership what would be the problem??
View 3 Replies
View Related
Apr 15, 2007
Now I need to synchonize the data in Pocket PC to the remote sql server database.
I have configured the publication and the virtual directory in the server. When the Pocket PC directly connects to the server (that to say, the Pocket PC connects to the server through the ActiveSync), the data can be synchronized successfully. But when the Pockec PC connects to another computer () through the ActiveSync (this computer connects to the server through the network), the data cannot be synchronized. But when I run the application in the emulator in the same computer, the data can be synchonized with the server.
using the following codes, the error message is:
Error Code: 80004005
Message:
Minor Err: 28017
Source: Microsoft SQL Server 2005 Mobile Edtion.
private void ShowErrors(SqlCeException ex)
{
SqlCeErrorCollection oErrors = ex.Errors;
StringBuilder oStrBld = new StringBuilder();
Exception oInner = ex.InnerException;
foreach (SqlCeError oErr in oErrors)
{
oStrBld.Append("Error Code: " + oErr.HResult.ToString("X"));
oStrBld.Append("Message : " + oErr.Message);
oStrBld.Append("Minor Err.: " + oErr.NativeError);
oStrBld.Append("Source : " + oErr.Source);
foreach (int iNumPar in oErr.NumericErrorParameters)
{
if (iNumPar != 0)
oStrBld.Append("Num. Par. : " + iNumPar);
}
foreach (String sErrPar in oErr.ErrorParameters)
{
if (sErrPar != String.Empty)
oStrBld.Append(" Err. Par. : " + sErrPar);
}
MessageBox.Show(oStrBld.ToString(), "SqlCeException");
oStrBld.Remove(0, oStrBld.Length);
}
}
The environment is:
Client:
Sql mobile (sql ce 3.0)
Server:
windows 2003 server
sql server 2000 with sp4
IIS 6
And I'm quite sure the virtual directory is correct.
Any body can help me? It's urget for me, thanks in advance.
View 3 Replies
View Related
Dec 10, 2004
Hi All;
I am getting ;
INSERT statement conflicted with TABLE FOREIGN KEY constraint 'FK_ChecklistCases_ChecklistFGroups'. The conflict occurred in database 'Test', table 'ChecklistFGroups'. The statement has been terminated.
but it seems to be no error can you help me please I can send you the related part of database
thank you
View 1 Replies
View Related