SQL 2012 :: Ignored Column In SSIS Package Throws Conversion Errors?
Dec 12, 2013
I have a data flow task in which I have a ADO NET source and OLE DB Destination. I have in the ADO NET source a sql command which pulls all the columns in a table. My requirement is to ignore a particular column,say column99. I opened advanced editor and deleted the mapping between the external and output columns for column99. I had also set the Error and Truncation to "Ignore Failure" for column99. I had also mapped the destination column to <Ignore> in OLD DB destination.
But this still throws the error-
Description: The ADO NET Source was unable to process the data. Field table-column99 missing an escape character for a quote.Unable to update PK WHERE clause.Error processing data batch.
How do I solve this?
View 9 Replies
ADVERTISEMENT
Oct 12, 2015
I am re-writing old DTS packages(from sql 2005) to convert them to SSIS packages(sql 2014) and in one of the script task, the old activex script does not run.
The script is :
'************************
' Visual Basic ActiveX Script
'************************
Function Main()
mydate = now()
yrs = ""
mth = ""
mth = Month(mydate) - 1
yrs = Right(Year(mydate), 4)
If Month(mydate) = 1 Then mth = "12"
[code].....
Not sure how to proceed forward? I am quite new to package migration
View 0 Replies
View Related
May 2, 2008
Hi All,
I am in the process of moving from a 32-bit SQL Server 2005 Enterprise (9.0.3054) to a 64-bit SQL Server 2005 Enterprise (9.0.3054 with 4 CPUs and 8GB of memory on Win 2003 SP2) and the process has been very frustrating to say the least. I am having a problem with packages that I created on my 64-bit SQL Server. I am importing a few tables from the 32-SQL Server into the 64-bit SQL Server using the Task --> Import to create the package.
Sometimes when I am creating a package I get the following error in a message box:
SQL Server Import and Export Wizard
The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered. The wizard cannot continue and it will terminate.
Additional information: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (System.Windows.Forms)
Other times when I run a package that has run successfully before I get the following error:
Faulting application dtexecui.exe, version 9.0.3042.0, stamp 45cd726d, faulting module unknown, version 0.0.0.0, stamp 00000000, debug? 0, fault address 0x025d23f0.
Other times I get this error message:
.NET Runtime version 2.0.50727.1433 - Fatal Execution Engine Error (79FFEE24) (80131506)
And still other times
The package appears to hang when running. By this I mean that the Package Execution Progress shows progress up to a point then it just stops. (The package takes about 17 seconds to run normally) CPU usage is at 1% and the package cannot be stopped.
I have deleted and re-created the package several times and I have also re-installed the service pack on the SQL Server (9.0.3054) but that did not help.
Does anyone have any other suggestions to try?
Thanks.
View 4 Replies
View Related
Apr 19, 2007
I€™m trying to copy data from production to my local machine using the SQL Server 2005 import and export wizard. It works fine if I select a small number of tables but throws errors
When there€™s a lot of tables. Have you ever experienced problems using it? Is there a better way to transfer the data?
the data source is SQL Server 2000 and the target is 2005. I have the optimize for many tables and transaction options selected
Here€™s the errors I get
Execute the transfer with the TransferProvider. (Error)
Messages
· ERROR : errorCode=-1073451000 description=The package contains two objects with the duplicate name of "output column "ErrorCode" (49)" and "output column "ErrorCode" (14)".
helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
· ERROR : errorCode=-1073451000 description=The package contains two objects with the duplicate name of "output column "ErrorCode" (31)" and "input column "ErrorCode" (52)".
helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
· ERROR : errorCode=-1073451000 description=The package contains two objects with the duplicate name of "output column "ErrorCode" (49)" and "output column "ErrorCode" (14)".
helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
· ERROR : errorCode=-1073451000 description=The package contains two objects with the duplicate name of "output column "ErrorCode" (31)" and "input column "ErrorCode" (52)".
helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
· ERROR : errorCode=-1073451000 description=The package contains two objects with the duplicate name of "output column "ErrorCode" (49)" and "output column "ErrorCode" (14)".
helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
· ERROR : errorCode=-1073451000 description=The package contains two objects with the duplicate name of "output column "ErrorCode" (31)" and "input column "ErrorCode" (52)".
helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
· ERROR : errorCode=-1073451000 description=The package contains two objects with the duplicate name of "output column "ErrorCode" (49)" and "output column "ErrorCode" (14)".
helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC} (Microsoft.SqlServer.DtsTransferProvider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
View 7 Replies
View Related
Oct 16, 2006
I got an SSIS package
that first "truncate the product table" then populate the table with new rows....if there is an error then i will invoke the send email task. However in the "truncate the product table" task, the sql i put "truncate dbo.product" instead of "truncate table dbo.product" but this error is not captured in the text file that I m going to send an email to the appropriate personnel.
Under logging, and when i go into "truncate product table" tasks , "Details", i saw "OnError", "OnWarning" and other error handlers...which should i tick in order for the text file to ONLY show errors I encounteered during the running of the SSIS package?
View 8 Replies
View Related
Jun 22, 2007
Hi folks,
I have a simple SSIS package I built to migrate data from a SQL db on one server to another SQL db on another server. All it does is: Execute SQL task to disable some triggers on the target table, Data Flow Task to pull the data from the source (a simple sql query) into the destination table (using OLEDB), then another Execute SQL task to re-enable the triggers.
This package ran fine several times during my testing. However, this morning it's not working anymore. When I run it and check its progress, the "Validation has started" is the only thing runs, then nothing else happens... no error messages, no timeouts, nothing in the output window besides "DTS.Pipeline: Validation phase is beginning".
The only thing that has changed is one change to a date in the where clause of my source query, so I'm baffled on why it no longer runs.
I'm pretty new to SSIS, so I could easily be missing something obvious here.
Anyone have any ideas on what's up, or who can point me in the right direction? I'm currently reading up on how to debug and add more comprehensive error handling, in hopes of finding a better description of the problem.
Thanks in advance,
Geoff
View 4 Replies
View Related
Feb 14, 2007
Hi All,
I hope someone can help becuase this problem is issue us several headaches.
We are currently trying to deploy an SSIS package to a production server. The deployment goes fine, the package runs ok when executed manually. The issues start when we try and execute it under the SQL agent.
Having gone back to the drawing board and spent much of the day reading various articles and applying the various options (especially those within the MS KB article 918760), we are still no closer to a resolution.
The SSIS package was created under an Administrator, and the SQL agent runs under a different Domain Admin account.
When we set up the Schedule to read from SQL Server or the SSIS Store the standard "Executed as user: DOMAINUSERNAME. The package execution failed. The step failed" in the history.
We tried to create the package as a file access and now get "Package could not be found" even though you can browse to i in the schedule list. The Domain account as full access to the folder where the package resides.
Has anyone else come across this issue, or have a workable solution?
Many TIA.
View 6 Replies
View Related
May 1, 2008
Hi All,
I have SQL query as:
SELECT CASE @sortcolumn
WHEN 'TYPE' THEN TYPE_TXT
WHEN 'DATE' THEN CHECKOUT_TS
WHEN 'ACCT' THEN ACCT_NBR
WHEN 'FIRST' THEN FIRST_NM
WHEN 'LAST' THEN LAST_NM
WHEN 'DAYS' THEN DATEDIFF(dd, CHECKOUT_TS, GETDATE())
ELSE DELIVER_ID END
FROM REQUEST
If @sortcolumn has 'DATE' or 'DAYS' it runs fine....any other value, I get an exception "Conversion failed when converting datetime from character string". All columns except CHECKOUT_TS are of type varchar.
Any help would be greatly appreciated.
Thanks,
Shashi
View 3 Replies
View Related
Jan 29, 2007
I have an SSIS package that fires an OnTaskFailed event whenever any of my tasks fail.
I would like to put any SSIS task failure message into a user defined variable.
Any idea how to do this?
Any help appreciated.
Regards,
Paul.
View 1 Replies
View Related
Aug 10, 2007
I get errors when I check out an SSIS package from source control (both Source Safe and TFS) relating to the connection objects where I was not the original developer who checked it in. Is there a solution to this other than altering the connection loginpassword for every connection object in the package before deploying?
View 4 Replies
View Related
Nov 18, 2014
As part of an ETL conversion I have dataflow task created that copies data from one table to another, we use it as a way to rename fields and change data types. What is strange is that the OLE DB SQL destination has not issue if I copy data from an int to smallint and in another case from an int to a numeric field and it runs fine. So I decided to test using a SQL Server Destination as I heard it may be faste that using OLE Db.
No I am getting the following error
Error: 0xC02020F5 at Insert into TRANSACTION, SQL Server Destination [32]: The column "ID" can't be inserted because the conversion between types DT_I4 and DT_NUMERIC is not supported.
Error: 0xC02020F5 at Insert into TRANSACTION, SQL Server Destination [32]: The column "ID1" can't be inserted because the conversion between types DT_I4 and DT_I2 is not supported.
I do understand the error but not why it runs fine using the OLE DB but when running it through SQL Server Destination I get this error.
View 2 Replies
View Related
Mar 28, 2007
I've deployed an ssis package to the database server through the manifest file over the network..
The package runs great when testing through vs.net on my client.
I've added the package to a job step in the sql server job agent.
When I test the new job, the package step fails, but there is no error or log information in the job history.
Wwhere can I get error information? And/or How can make SSIS error information more verbose in the job history?
Thanks for any help or information.
View 6 Replies
View Related
Feb 20, 2007
Lately, I have been experimenting with SSIS and I created a generic custom error logging component that saves all offending data on data flow component failure. However...
Instead of re-directing rows at the data flow level and handling/logging the data at that level, is it possible to catch all of this information at the package level and handle/process it there?
If so how would you do this?
Thanks!
Tony
View 13 Replies
View Related
Oct 24, 2007
Hi
I have created a package which executes every 10 mins. Last week end for maintenance purpose, I shutdown my database. Now as an initial execution process, my package does the default validation steps on which the database connection validation step fails. As this is the default functionality of SSIS I am not able to capture this error. Is there anyway to capture this error inside SSIS Package?
Thanks in advance.
Gnan
View 3 Replies
View Related
Sep 15, 2015
In a stored procedure, the following code is causing a huge read and CPU load when it really shouldn't. The @IDParameter below is coming in as a parameter to the proc.
Here's the snippet of code where the problem is coming in:
DECLARE @ID INT;
SET @ID = (SELECT ID From OtherTable WHERE FKID = @IDParameter);
SELECT COUNT(*)
FROM LargeTable
WHERE MostlyZeroID = @ID AND MostlyZeroID > 0Most (90+%) of the MostlyZeroID rows are 0 (hence the name) but regardless of distribution this should evaluate with minimal work on SQL Server's part to 0. However, when this was run, it is using a ton of CPU and doing a ton of Reads as it seeks through the entire index. When I look at the execution plan, I see under the seek predicate a Scalar Operator(CONVERT_IMPLICIT(int,[@1],0)) which is what is destroying the performance.
I've confirmed that the MostlyZeroID column in the LargeTable is defined as an INT NOT NULL. I also tested the scenario outside the stored procedure without any variables as the following to make sure it wasn't some kind of strange parameter sniffing scenario:
SELECT COUNT(*)
FROM LargeTable
WHERE MostlyZeroID = 0 AND MostlyZeroID > 0
However, this query also did the implicit conversion. I then tried this out on a temp table populated with a similar number of records (100 million) with a similar distribution and I didn't get the implicit conversion (I got a constant scan as I would've expected) when I did this:
SELECT COUNT(*)
FROM #TestTable
WHERE MostlyZero = 0 AND MostlyZero > 0
I also tried the same on several other tables that are set up similarly (large amount of zeros in an INT column) and I always got a constant scan and didn't do an implicit conversion.
why the query engine is interpreting this 0 as something other than an INT and doing an implicit conversion when getting the count in the scenario above? What can be done to protect against it? In the above scenario, an IF @ID > 0 statement was placed before the code including the count since there was no reason to even run the code if the @ID was equal to zero.
View 9 Replies
View Related
Apr 10, 2006
I have imported a package using SSIS into the Maintenance Plan folder from another server.
It imports fine, but when i Modify the package then click save I get the following error : 'Guid should contain 32 digits with 4 dashes'.
This has been reported on other forums without resolution.
Pete
View 17 Replies
View Related
Jun 3, 2014
I would like to fetch the data flow component name while package is executing. Since system variable named [System::SourceName] only fetches name of the control flow tasks? Is there a way to capture them?
View 5 Replies
View Related
Jul 24, 2015
I have an SSIS and SSAS project in the same solution. Â I need to debug the SSIS package regardless if there is an error or two in the SSAS project. Â Is there a way to ignore the SSAS project while I debug the SSIS package?
View 2 Replies
View Related
Feb 27, 2015
How to fetch records which throws error?
For example
I'm inserting records from a table to another table, having multiple columns
SampleQuery :
insert into tableB (col1,col2....col10)
select col1,col2....col10 from tableA
* while executing this query im getting error. (like varchar cant convert to numberic)
* Here I have no clue in which column it is
* also dont know which row causes it
View 3 Replies
View Related
Jul 31, 2006
I have a parent package that calls child packages inside a For Each container. When I debug/run the parent package (from VS), I get the following error message: Warning: The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
It appears to be failing while executing the child package. However, the logs (via the "progress" tab) for both the parent package and the child package show no errors other than the one listed above (and that shows in the parent package log). The child package appears to validate completely without error (all components are green and no error messages in the log). I turned on SSIS logging to a text file and see nothing in there either.
If I bump up the MaximumErrorCount in the parent package and in the Execute Package Task that calls the child package to 4 (to go one above the error count indicated in the message above), the whole thing executes sucessfully. I don't want to leave the Max Error Count set like this. Is there something I am missing? For example are there errors that do not get logged by default? I get some warnings, do a certain number of warnings equal an error?
Thanks,
Lee
View 5 Replies
View Related
Mar 21, 2006
I have a table in sql server 2000 which has a column whose name starts with a number("2ndName").I have a c# code which updates the table by filling a Dataset.When I issue an update, it throws the following error:-"Incorrect Syntax near 2"Query I use to build the adapter is "SELECT id, Name, [2ndName] FROM MyTBL WHERE 1 = 3" and the statement issued to update is "objAdapter.Update(objDSDB, "MyTBL")" when it throws the error "Incorrect Syntax near 2".Any help to resolve this is appreciated.Thanks in advance.Jai
View 3 Replies
View Related
Jul 15, 2014
We have SQL Server 2012 running on Windows 2008 Server. We would like to use a SSIS Package to generate a text file and then secure copy it to a vendor's ftp site. Would it be best to use an FTP Task or Execute Process Task (to call the batch file)? Would I need to install some software like winscp or does the Windows O/S has some secure copy or ftp programs that may be used?
View 4 Replies
View Related
Dec 9, 2014
Looking for steps to execute the package from CMD ?
View 1 Replies
View Related
Jun 18, 2015
We had a scenario where we used to run the Process from front end thru application. on the back ground the the process call the SP & from there it calls the SSIS package then again to SP.
after SSIS package ran succesfully it will be updated on a table with sucess then call the SP & deletes the entry from the other table but in one scenario Package was success but the entry was not getting deleted as the process takes almost 2-3 hours loading 60 millions records. but the process was running in SQL 2008 but once we upgraded to SQL 2012 its not working for one application. its not returning any error as timeout also. we tried changing the server level setting for remote query time out also to 0 but no luck .
View 0 Replies
View Related
Jan 7, 2014
I have a ssis package in the DW environment. How can I run this package in the production environment by creating the job and run remotely.
View 7 Replies
View Related
Apr 3, 2014
We are running SQL Server 2012 SP1 64-Bit EE on Windows Server 2008 R2 SP1. I have a SSIS Package which connects to a FTP Site and downloads a file. Then it truncates a table and loads the file data into a table. This package works okay when executed from within VSS and SSMS (In SSISDB, right click on the package and execute). However, when I execute it as a Job it does not run and appears to be failing on the first task which is the FTP Task. SQL job step - Type: SSIS Package; Run as: SQL Server Agent Service Account (domain account called playuser); Authentication: Windows Authentication.In the All Executions Standard Report for the SSISDB Catalog, it only says: FTP Download File: Errors: There were errors during task validation.
Is this because my domain account does not have access to the FTP Site?Is this where I need to come up with a Proxy Account with Credentials?Do I need to set up a SQL Server Login (Proxy Account) with the same username being used in the FTP Batch file?
FTP Commands in a batch file:
username
password
cd omb
asc
get STRMASTER
quit
View 3 Replies
View Related
Dec 28, 2014
I am tasked with creating a batch file to execute SSIS packages.
View 3 Replies
View Related
Jan 9, 2015
I have a bat file that kicks off a master package, which kicks off about 300 child packages. My bat file is working correctly, however there seems to be issues executing packages in 64 bit mode.
So my question is...
Is there a way to specify in the bat file to execute packages in 32 bit mode and not 64 bit?
bat file:
"C:Program FilesMicrosoft SQL Server110DTSBinnDTExec.exe" /f "E:MasterPackage.dtsx"
View 1 Replies
View Related
Feb 6, 2015
I have been handed a datawarehouse environment to look at however I cannot find the ssis packages (.dtsx).
I see that the packages have been deployed to SSISDB but I can't find the files to load into Datatools.
Once the files have been deployed is it possible to remove the package files? Is there a way of retro'ing the deployed packages out of SQL so I can view them in Datatools?
View 2 Replies
View Related
Aug 3, 2015
I have a multi value  parameter called "Location" and this depends on another multi valued  parameter value. The default value for the parameter "Location" comes from the another another multi valued  parameter. Now say when the default value is set for the parameter Location like the below:
The Location parameter data set has values from the Query and default values has been set as shown below:
=Iif(array.IndexOf(Parameters!Program.Value,"A")>-1,nothing,"N/A")
I get an error on preview saying that . The Default Expression for the report parameter "Location" contains error:
Unable to cast object of type 'System.String' to type 'System.Array'.
View 2 Replies
View Related
Nov 22, 2007
Hi All,
Can i create Row to Column in the package. If i want to have each row in diffrent columns can i have that
For Example
Input :
Column A
101
201
301
404
505
606
Output
Column_AA || Column_BB || Column_CC || Column_DD || Column_EE || Column_FF
101 201 301 404 505 606
Can i do this.......................
View 1 Replies
View Related
Mar 19, 2013
OS: Windows 2012, standard, 64-bit
SQL: 2012 + SP1 + CU2 = 11.0.3339
We recently decided to "break apart" our BI environment. We used to have everything on one box, DB Engine, SSIS, SSAS & SSRS. Everything has been running fine, but we now have other projects using these services, so we decided to break them apart into their own boxes.
We now have DB Engine on one Server, SSIS & SSRS on another server and SSAS on yet another server, so we now have three boxes that replaced one box. All are Windows 2012, standard, 64-bit with SQL Server 2012 + SP1 + CU2.
Since some of our SSIS packages have to access external resources, we used a domain account for it's service account. The DB Engine and SSAS box are using the default service accounts when installed. I can execute the packages fine on the SSIS server, I can even execute them via SQL Agent jobs on the SSIS box (we did install a default instance of SQL on the SSIS box), however when I try to execute a package from my laptop, it fails with the ugly "Login failed for user 'NT AUTHORITYANONYMOUS LOGON'".
I immediately double checked my SPNs and they all looked correct for the SSIS server and the service account we are using (and we had no duplicates). I also double checked the User Rights Assignment in the Local policy editor and all the correct Rights have been assigned (Log on as a service, Bypass traverse checking, Impersonate a client after authentication).
View 3 Replies
View Related
Dec 2, 2013
I was assigned a project to make a backup of data from 3 lists in a sharepoint with the objective of using that data to do reports on it using Report Builder.
I was abble to do the downloads using the add in to do downloads Sharepoint List Source and Destination "plug in" in SSIS, now the issue is how to update the backup table only with updated and new rows.
Daniel
View 1 Replies
View Related
