Is it possible to allow a user to insert and update data in a table but prevent them from performing deletes against that same table? For auditing purposes I need to prevent the end users from being able to delete data.
View 1 RepliesWe are facing a weird scenario in which the snapshot is getting corrupted after insertupdate few million records in to a table .
SQL Server 2012
windows server 2008 R2
service pack 1
64-bit OS
Our system runs a SQL Server 2012 DB, it has a table (table_a) which has over 10M records. Our system have to receive data file from previous system daily which contains approximate 3M updated or new records for table_a. My job is to update table_a with the new data.
The initial solution is:
1 Create a table (table_b) which structur is as the same as table_a
2 Use BCP to import updated records into table_b
3 Remove outdated data in table_a:
delete from table_a inner join table_b on table_a.key_fileds = table_b.key_fields
4 Append updated or new data into table_a:
insert into table_a select * from table_b
As the test result, this solution is very inefficient. Step 3 costs several hours, e.g. How can I improve it?
I want Compare two Table data and insert changed field to the third table ...
View 9 Replies View RelatedFrom: JAGADISH KUMAR GEDELA [jgedela@miraclesoft.com]
Sent: 10/10/2007 4:13:43 PM
To: jgedela@miraclesoft.com [jgedela@miraclesoft.com]
Subject: forum
Hi all,
I need to Insert the XML File data into SQL SERVER 2005 db(table).
For that I created the table with XML Native column (using typed xml)
*********************************create table command************
CREATE TABLE XmlCatalog (
ID INT PRIMARY KEY,
Document XML(CONTENT xyz))
***********************************
In order to Create the table with typed xml ,before that we have to create the xml schema which i
mentioned below
************************************create schema command********
CREATE XML SCHEMA COLLECTION xyz AS
'Place xml schema file ’
************************************
I created the xml schema file by using the xmlspy software.
--------------------------Insert command---------
INSERT into XmlCatalog VALUES
(1,'copy xml file ‘)
-------------------------------
I need to retrieve the xml data from the table
------------select query----------
SELECT Document.query (‘data (/X12//UserId)') AS USERID,
Document.query (‘data (/X12/X12_Q1/header/ISA//ISA_Authorization_Information_Qualifier)')
AS
ISA_Authorization_Information from XmlCatalog.
-----------------
I Need to update/insert/delete the xml data in the table
Can you please suggest the procedure to implement the above requirement(insert/update/delete)
I have a UDF called 'GetTable1()'. In this function, the return value are the rows selected from table 'Table1'.
But, before returning, I would like to check if the table is empty, and if it is then insert a dummy row into this table. How would I do this within a function?
I have two databases DB1 and DB2 DB1 has a source table named 'Source' I have created a login 'Test_user' in DB2 with Public access. I have also created a view named 'Test_view' in DB2 which references data from DB1.dbo.Source
How can I do the following: AS A Test_user
SELECT * FROM DB2.dbo.Test_view --Should work
SELECT * FROM DB1.dbo.Source --Should Not work
How to create insert statements of the data from a table for top 'n' rows. I know we can create using generate scripts wizard, but we can't customize the number of rows. In my scenario i got a database with 10 tables where every table got millions of records, but the requirement is to sample out only top 10000 records from each table.
I am planning to generate table CREATE statements from GENERATE Scripts wizard and add this INSERT STATEMENT at the bottom.
EX : INSERT [dbo].[table] ([SERIALID], [BATCHID] VALUES (126751, '9100278GC4PM1', )
What I am trying to do, Extract the data from SQL table and Insert in Email Body and email to user. I got good article on Internet, I follow all steps as it is, but still I am getting error.
Here is the link : [URL] ....
But I am getting Error:
Error: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.FormatException: Index (zero based) must be greater than or equal to zero and less than the size of the argument list.
at System.Text.StringBuilder.AppendFormat(IFormatProvider provider, String format, Object[] args)
at System.String.Format(IFormatProvider provider, String format, Object[] args)
at ST_7f59d09774914001b60a99a90809d5c5.csproj.ScriptMain.Main()
[Code] ....
I am currently working with C and SQL Server 2012. My requirement is to Bulk fetch the records and Insert/Update the same in the other table with some business logic? How do i do this?
View 14 Replies View RelatedI am unable to load data from flat file to sql table using bulk insert sql statement
My code:-
DECLARE @filePath VARCHAR(200)
DECLARE @sql VARCHAR(8000)
Declare @filename varchar(100)
set @filename='CCNVZ_150401054418'
SET @filePath = 'I:IncomingFiles'+@FileName+'.txt'
[Code] .....
Hi,
My scenario:
I have a master securities table which has 7 fields. As a part of the daily process I am uploading flat files into database tables. The flat files contains the master(static) security data as well as the analytics(transaction) data. I need to
1) separate the master (static) data from the flat files,
2) check whether that data is present in the master table, if not then insert that data into the master table
3) If data present then move that existing record to an history table and then update the main master table.
All the 7 fields need to be checked to uniquely identify a single record in the master table.
How can this be done? Whether we can us a combination of data flow items or write a sql procedure to do all this.
Thanks in advance for your help.
Regards,
$wapnil
I wonder if it possible to move data from tables on a linked server to a "normal database"?
Name linked server: Covas
Name table on linked server: tblCountries
Name field: cntCountryName
Name "normal" database: CovasCopy
Name "normal" table: Countries (or dbo.Countries)
Name "normal" field: Country
This is just a test setup. I figure that if I get this working the rest will be easier.
My current query:
select * from openquery(COVAS,'
INSERT INTO CovasCopy.dbo.Countries(Country)
SELECT cntCountryName FROM db_covas.tblCountries;')
table2 is intially populated (basically this will serve as historical table for view); temptable and table2 will are similar except that table2 has two extra columns which are insertdt and updatedt
process:
1. get data from an existing view and insert in temptable
2. truncate/delete contents of table1
3. insert data in table1 by comparing temptable vs table2 (values that exists in temptable but not in table2 will be inserted)
4. insert data in table2 which are not yet present (comparing ID in t2 and temptable)
5. UPDATE table2 whose field/column VALUE is not equal with temptable. (meaning UNMATCHED VALUE)
* for #5 if a value from table2 (historical table) has changed compared to temptable (new result of view) this must be updated as well as the updateddt field value.
I would like to change a value after the table updates inserts a new row based on the value of that column
Table Name is: MPanel
Col Names: RID, FPID.
I want to:
If column RID='16'
Then UPDATE FPID='1'
How can I trigger that update? Would this work:???
CREATE TRIGGER dbo.MyTrigLI
ON dbo.MPanel
FOR INSERT, UPDATE
AS
BEGIN
UPDATE [MPanel]
SET
FPID='1'
WHERE (UPDATE(RID='16')
END
Hello, I recently view a webcast of sql injection, and at this moment I created a user, and give dbo to this user, and this same user, is the one I have in the connection string of my web application, I want to create a user to prevent sql injection attacks, I mean that user wont be able to drop or create objects, only select views, tables, exec insert,update, deletes and exec stored procedures.
Is any easy way to do this?
A database role and then assing that role to the user?
Hello
I've to write an trigger for the following action
When a entry is done in the table Adoscat79 having in the index field Statut_tiers the valeur 1 and a date in data_cloture for a customer xyz
all the entries in the same table where the no_tiers is the same as the one entered (many entriers) should have those both field updated
statut_tiers to 1
and date_cloture to the same date as entered
the same action has to be done when an update is done and the valeur is set to 1 for the statut_tiers and a date entered in the field date_clture
thank you for your help
I've never done a trigger before
I am writing a query to return some production data. Basically i need to insert either 1 or 2 rows into a Table variable based on a decision as to does the production part make 1 or 2 items ( The Raw data does not allow for this it comes from a look up in my database)
I can retrieve all the source data i need easily but when i come to insert it into the table variable i need to insert 1 record if its a single part or 2 records if its a twin part. I know could use a cursor but im sure there has to be an easier way !
Below is the code i have at the moment
declare @startdate as datetime
declare @enddate as datetime
declare @Line as Integer
DECLARE @count INT
set @startdate = '2015-01-01'
set @enddate = '2015-01-31'
[Code] .....
I have Table Staffsubjects
with columns and Values
Guid AcademyId StaffId ClassId SegmentId SubjectId Status
1 500 101 007 101 555 1
2 500 101 007 101 201 0
3 500 22 008 105 555 1
I need to do 3 scenarios in this table.
1.First i need to update the row if the status column is 0 to 1
2.Need to insert the row IF SegmentId=@SegmentId and SubjectId<>@SubjectId and StaffId=@StaffId
3.Need to insert the row IF StaffId<>@StaffId And ClassId=@ClassId and SegmentId<>@SegmentId and SubjectId<>@SubjectId
I have wrote the stored procedure to do this. But the problem is If do the update. It is reflecting in the database by changing 0 to 1. But it shows error like cannot insert the duplicate
Here is the stored Procedure what i have wrote
ALTER PROCEDURE [dbo].[InsertAssignTeacherToSubjects]
@AcademyId uniqueidentifier,
@StaffId uniqueidentifier,
@ClassId uniqueidentifier,
@SegmentId uniqueidentifier,
@SubjectId uniqueidentifier
[Code] ....
Is there a way in SQL server that can generate stored procedures for select, insert, update, delete on certain tables?
View 4 Replies View RelatedI am trying to use a stored procedure to update a column in a sql table using the value from a variable table I getting errors because my syntax is not correct. I think table aliases are not allowed in UPDATE statements.
This is my statement:
UPDATE [dbo].[sessions_teams] stc
SET stc.[Talks] = fmt.found_talks_type
FROM @Find_Missing_Talks fmt
WHERE stc.sessionid IN (SELECT sessionid FROM @Find_Missing_Talks)
AND stc.coupleid IN (SELECT coupleid FROM @Find_Missing_Talks)
We need to Insert/Update a Fact Table from staging Table. currently we are using a SP which update Fact Table for Each region. this process is schedule, every 5 min job is run and Update fact table.but time of Insert and Update too long from staging to Fact, currently we are using merge statement for Insert and update.in my sp we are looping number how many region we need to update and at a time single Region we are updating using while loop in current SP.
View 7 Replies View RelatedI just created a new table with over 100 Columns and I need to populated just the first 2 columns.
The first columns to populate is an identify column that is the primary key. The second column is a foreign_key to an other column and I am trying to populate this columns with all the values from the foreign_key value. This is what I am trying to do.
column1 = ID
column2= P_CLIENT_D
SET IDENTITY_INSERT PIM1 ON
INSERT INTO PIM1 (P_CLIENT_ID)
SELECT
Client.ID
FROMP_Client
So I am trying to insert both an identity values and a value from an other table while leaving the other columns blank. How do I go about doing this.
To avoid locking/blocking, or in transaction scope, we are trying make a common practice of writing coide for update commands in our all SPs based on primary key columns in where clause. I have a following scenario...
UPDATE [dbo].[TL_CST_Locker_Issuance] SET
[isActive] = 0
WHERE
LockerIssuanceId IN (SELECT LockerIssuanceId
[Code] ...
What is the better approach and should be followed to avoid locks and gain performance or best approach.
I run the following statement and it will not update beyond 7 million plus rows and I have about 38 million to complete. I keep checking updated row counts and after 1/2 day it's still the same so I know something is wrong because it was rolling through no problem when I initiated it. I need to complete ASAP so it's adding to my frustration. The 'Acct_Num_CH' field is an encrypted field (fyi).
SET rowcount 10000
UPDATE [dbo].[CC_Info_T]
SET [Acct_Num_CH] = 'ayIWt6C8sgimC6t61EJ9d8BB3+bfIZ8v'
WHERE [Acct_Num_CH] IS NOT NULL
WHILE @@ROWCOUNT > 0
BEGIN
SET rowcount 10000
UPDATE [dbo].[CC_Info_T]
SET [Acct_Num_CH] = 'ayIWt6C8sgimC6t61EJ9d8BB3+bfIZ8v'
WHERE [Acct_Num_CH] IS NOT NULL
END
SET rowcount 0
I'm working with an existing program that crafts an insert statement
from user input. The data is machine generated, though, and some
of it has semicolons. How can I "escape" those semicolons so that
I can insert them into the database? Does the ESCAPE key work
with the insert statement, too? Can I just replace the ";" with
some other character(s) to escape it? I'm not finding much in the
online help. Thanks!
hi ,
i am new to this.
how should i update the user input values into sql server database?
i am using asp.net and c#
FIELDS are-
userId,
name,
description,
startTime,
endTime,
audiencePassword,
presenterPassword
i know it must be simple...but i haven't worked on this before.
Jaimin
I've just written a query that successfully brings back the data from one table based on the information from another. Basically we have been given a table of information and need to update certain fields in our user_group table with the new info.
Here is the SELECT statement
SELECT user_group.id, user_group.name, user_group.description, Consultants.description AS Expr10, user_group.btype, user_group.rootmenu,
user_group.intra_user, user_group.primary_g_id, user_group.fname, user_group.lname, user_group.ntlogon, user_group.lang_id,
user_group.[external], user_group.title, user_group.work_tel, user_group.work_fax, user_group.work_ext, user_group.mobile, user_group.sex,
user_group.add2, user_group.add3, user_group.town, user_group.county, user_group.pcode, user_group.private_flag,
[code]....
We want to update the 'description' on the user_group table with the 'description' from the 'consultants' table. To test this, we only want to write the UPDATE so that it changes the description where the name is 'Adam Froth. The UPDATE statement that we've written is
UPDATE user_group
SET user_group.description = Consultants.description
FROM user_group
INNER JOIN Consultants
ON user_group.description = consultants.description
WHERE name like 'Adam Froth%'
but it keeps erroring and saying that it could 'Not be bound'.
I wrote query to update id int(1,1) to some value but its not giving me the result. Is it not possible to update id on the table.
View 7 Replies View RelatedI have a temporary table #Temp with, among others, a column CountryCode and a column Lastname.I would like to change the ü that appears in some names to u (u umlaut to a plain u), but only for those that have the nationality 'Ned'
My code so far:
Update #Temp
set LastName = replace(Lastname, 'ü', 'ue') WHERE CountryCode = 'Ned'
This code deletes all entries in the column Lastname
I think it must be easy, but I keep staring at the code.
What to do?
I'm importing XML file into DataTable and need to Insert Data into SQL Table.
I'm not sure if its posible to take a DataTable with Data and insert into DataAdapter. From there i wanted to update SQL using TableAdapter?
Any Tips?
Thanks,
This should be easy for someone, but I just can't seem to find a sample to do this.....I have created a table...CREATE TABLE dbo.test ( oId int NOT NULL UNIQUE, test1 varchar(50) NOT NULL PRIMARY KEY )Now, I need to go back and simply add another column to the table such as test2 varchar(50)Not sure if the insert is the way to go and been playing around with various statements but with no luck.Suggestions?Thanks all,Zath
View 2 Replies View RelatedI am new to triggers and need help on the following:
I have a hourly table that inserts new rows every hour but I need to either Insert or Update the daily table with the sum of the reading from the hourly table. If a row exist in the daily table with the date of the hourly table, then I need to update this row but if it doesn't exist, I need to insert this row.
Thanks for any suggestions...
Alan