SQL 6.5 Connection From Domain Server To Workgroup Server
Jul 22, 1999
I'm trying to establish connection between two SQL servers, one on a Domain and one on a Workgroup. When I log as the local administrator to the Domain machine, everthing is fine and both machines can register each other (both machines have the same local admin user name & password.) When I log back into the Domain on the Domain machine, I cannot register the Workgroup server but I can register Domain server from the Workgroup server. Putting the Workgroup machine on my Domain won't work because I'm going to be using a firewall. Do I need to set up another domain for the Workgroup machine and configure a trust on the Domain machine? Any suggestions?
View 2 Replies
ADVERTISEMENT
Jul 20, 2005
Hi have a small network setup and have MS sql server on workstation.Can access it locally but cannot access it from other work stations.I am assuming it is some sort of logon error, being it is not adomain. Any ideas on getting by this ?
View 2 Replies
View Related
May 8, 2008
Hi folks,
For the past couple of days, I have been trying to get my SQL Server to work with Distributed Views. I am created linked servers, linked server logins, set XACT Abort ON.
I am successful in running a select against the distributed view, but was unable to run an "INSERT"
When I try a simple insert, the query took 3:14 minutes. Then I get an error message like:
Server: Msg 7391, Level 16, State 1, Line 1
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].
I have checked that MSDTC is running and configured under a domain account on both machines - running sQL 2000 and win2K
I have been unsuccessful still after tinkering for several days. I have checked my network configurations and noticed that when I try to ping the other machine by name, I don't get a response. I can only get a response to a ping when I enter the IP address directly.
Could this be a problem? Also, I noticed that for some strange reason, whenever I ping from either machine it is showing an external IP - always the same one no matter which computer name I try to ping. Something like 209.xxx.xxx.xxx instead of the 192.xxx.xxx.xxx that I expect.
Finally, I thought that problem was possibly due to incorrect Active Directory configuration. I tried to remove both machines from the domain by changing them to a workgroup "TEST" instead of the domain.
When I restarted the PC, I am unable to start SQL Server. It shows the Red Stop sign. When I try to start it, it gives an error like: Service could not start because one or more dependencies failed.
When I add the machine back to the domain, SQL server starts working on reboot.
Can anyone help me please.
Thanks.
View 7 Replies
View Related
Aug 24, 2006
I have been asked to move a system running MS SQL 2000 Server from a workgroup to a domain. The SQL server is running in SQL Authentication and the services are running as local system.
Will SQL Server break after the move?
Any advice will help. I thought I remember this being the case, but possibly only with Windows Authentication.
View 3 Replies
View Related
Oct 12, 2007
Hi,
I have a quick question regarding domains and workgroups.
Currently I am working on an issue in the office of a small business. Right now there are 3 client computers that connect to a dell server running windows std. server 2003. The server has sql running on it that takes care of the invoicing system. Two out of the three work stations are able to use the database fine, but there is one that is unable to connect to the database. The only different that I could find is that the two workstations that DO work are currently set to use a workgroup, whereas the one workstation that does NOT work is set to use a domain...... I tried switching that computer to workgroup, but then I was unable to login as the normal user that I had always logged in as before.....
What can I do to solve this dilemma?
Any help would be greatly appreciated!
I apologize if this is the wrong forum for this, and if it is, if someone would point me to the correct one I would appreciate it.
Thanks
-steve
View 4 Replies
View Related
Jan 31, 2008
My company has a large-ish website and we are migrating to new
servers. There will be a web server (accessible to the world) backed
by a SQL Server 2005 Standard server (only accessible by the web server and
through VPN/Remote Desktop to administrators and our internal
network). We can either put the database server (which is not in a
cluster) on our domain or leave it in a workgroup. My first thought
is leave it in a workgroup simply for security and reliability (i.e.
if the DC goes down or loses connectivity), but people here are
disagreeing with me.
Should I put the database server (which is not used internally at all)
on the domain or leave it in a workgroup?
View 1 Replies
View Related
Jan 31, 2008
My company has a large-ish website and we are migrating to new
servers. There will be a web server (accessible to the world) backed
by a SQL Server 2005 Standard server (only accessible by the web server and
through VPN/Remote Desktop to administrators and our internal
network). We can either put the database server (which is not in a
cluster) on our domain or leave it in a workgroup. My first thought
is leave it in a workgroup simply for security and reliability (i.e.
if the DC goes down or loses connectivity), but people here are
disagreeing with me.
Should I put the database server (which is not used internally at all)
on the domain or leave it in a workgroup?
View 1 Replies
View Related
Sep 26, 2005
We have a set of client servers which will include a SQL Server 2000 active/passive cluster attached to a SAN. We have all the equipment here (no attachment to client site) to configure. My worry is since it will have to be setup as a workgroup, and then shipped to client to add to their domain, is this a doable option. has anyone had to do this or tried this? Or would we be better off shipping whole thing to client and setting up cluster there?
View 6 Replies
View Related
Jul 8, 2006
In the following scenario, I am getting the message 'Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection'.
I am running a Windows Server 2003 with development environment and Sql Server Management Studio in a workgroup on a virtual PC.
My SQL Server 2000 is running on a domain server.
On the virtual Pc I have setup my user login and password to be the same as my domain login and password. Why is the Management Studio not using impersonation and allowing me to connect to the SQL server on the domain?
View 4 Replies
View Related
Dec 27, 2006
This question is regarding a brand new out-of-the-box SQL Server 2005 Workgroup Edition install. The old SQL Server 2000 server is working properly with regard to the issue we're having:
We are using Windows Authentication, and have created SQL logins for about
40 different groups on our domain. We've given those logins the appropriate
permissions on the databases they're supposed to be able to access.
The SQL Server is not a domain controller, but is a member of the domain, and domain logins do work for Windows-login purposes on this box.
The problem is that when users try to connect to the SQL server, they are denied access. An error 18456 is thrown, and logged in the Application event log
stating "Login failed for user OURDOMAIN heuser" (example values). The
domain user is properly a member of group added as a login to SQL Server, and we've
confirmed that there are not conflicting permissions that would deny those
users access via another route. These same groups are working fine on the SQL Server 2000 box.
This is only a problem for domain-based groups. If we create a local group
on the SQL server machine, through Computer Management -> Local Users and
Groups, then make the same domain users a member of THAT group, and finally then
follow the same process to add that local group to SQL Server Logins and set
the database privileges, it works!!
Our group memberships change frequently, and are used for a lot more than
just SQL server permissions. So, using local groups and maintaining
membership in both places is not really feasible. Any ideas why a local
machine group containing domain user accounts would work fine, but a domain
group containing the same accounts would not?
Thanks in advance.
View 20 Replies
View Related
Sep 26, 2006
I'm trying to run a test from my test environment which is a non-domain Windows 2000 server to access my domain 2003 with SQL2005. I have install 2005 tools to try to access the SQL server.
- I have try following the KB265808 - no success.
- Reading alot of blogs and it seems all are pointing to the same problem. "Remote access" but the settign is enabled.Error Message:
TITLE: Connect to Server
------------------------------
Cannot connect to ardsqldatawh.
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=53&LinkId=20476
Question: Could Windows 2003 security be blocking access? I'm using sa account to access.
Also, sa account does not seems to work for remote access. It is ok when accessing locally.
Any help would be appreciated.
949jc
View 1 Replies
View Related
Feb 16, 2007
Hi, I have been creating a web store, which we will be hosting on our Windows Server 2003 system. I am also writing a windows application that will be running on our client systems on the same network/domain. I have no need to allow internet access to the database, just within our domain. Pretty much the windows application will be running and whenever a customer places an order, the program will automatically pop-up the needed information for our credit card processing, and shipping department. So far I have been able to establish a connection to our server by creating a data connection under the server explorer. However, it does not list any databases whatsoever, the web site has been published using Visual Studio 2005 Professional on the server, and is in 100% working order. I have searched and haven't found anything concrete on this, i'm sure its just something simple that im missing. It appears that the server is definetely connected to the database (since the website is fully functional), but it is not listing the information for other systems to access it. If anyone has any ideas, please let me know. Thank you
View 8 Replies
View Related
Sep 28, 2007
Hi,
We have the followoing:
-A "master domain" AD, a "sub domain" AD, a trust relationship between the two (sub trust master)
-A sql server 2005 on a win server 2003 in "sub domain" AD
-A linked server to "sub domain" AD
-A linked server login using a "sub domain" admin acccount
-A view to this linked server
-A grant on masterDomain/Domain Users to the database
-A grant on subDomain/Domain Users to the database
-We want all connections done through "Windows Authentication" not "Database Authentication".
Queries on the view work fine using "sub domain" user accounts.
Queries on the view fail using "master domain" user accounts (including master domain admin accounts)
"Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "ADsDSOObject" for linked server "ADSI" reported an error. The provider indicates that the user did not have the permission to perform the operation."
All connections are done through "Windows Authentication" not "Database Authentication".
Can we establish cross domain connectivity with "Windows Authentication" ?
Below are details of the implementation:
SELECT TOP (100) PERCENT *
FROM OPENQUERY(ADSI,
'SELECT displayname, givenName, sn, cn (etc...)
FROM ''LDAP://OU=PEOPLE,DC=subDomain,DC=com''
WHERE objectCategory = ''Person'' AND objectClass = ''user'' ')
EXEC sp_addlinkedsrvlogin @rmtsrvname ='ADSI', @useself='false',
@rmtuser='subDomainAdminAccnt', @rmtpassword='sunDomainAdminAccntPassword';
In SQL Server Mngt Studio in Server Objects/Linked Servers/Providers/ ADSI properties security tab I have:
"connections will: <be made using this security context> Remote login:'subDomainAdminAccnt' With password: 'subDomainAdminAccntPassword'
Error:
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "ADsDSOObject" for linked server "ADSI" reported an error. The provider indicates that the user did not have the permission to perform the operation.
Msg 7320, Level 16, State 2, Line 1
Cannot execute the query "SELECT displayname, givenName, sn, cn
FROM 'LDAP://OU=PEOPLE,DC=subDomain,DC=com'
WHERE
objectCategory = 'Person'
AND objectClass = 'user'
" against OLE DB provider "ADsDSOObject" for linked server "ADSI".
View 7 Replies
View Related
May 7, 2008
Hi All,
A client of mine was using SQL Express and soon realised this doesn't meet his needs performance or database size wise. He also realised that SQL Server 2005 Workgroup came free with his R2 version of SBS.
So in essence, I have been trying to find the Microsoft recommended way to upgrade from Express to Workgroup. I have not been able to find a step-by-step guide and to add to my confusion, when I run the work-group installer it tells me to run the installer with a switch which I have gone ahead and done but when selecting components it has all of them defaulted to blanked out.
Surely the process for an in-place upgrade should not be so technical as I am finding it ? To my mind, the natural progression would be to upgrade express to a better capable version of 2005 and should be as easy as pie.
Anyway, I am basically looking for a step-by-step guide on how to upgrade to get it done right the first time as opposed to upgrading and than realised some remenants of Express are still larking about causing trouble.
Regards,
QS
View 3 Replies
View Related
May 12, 2007
hi
COMPUTER-1
IP ::::: 129.100.100.5
COMPUTER NAME IS ::::: HASH
MEMBER OF DOMAIN
in this computer sqlserver express edition is installed, i want to remove this express becoz in configuration manager it show two SQLSERVER'S are running. when i browse from COMPUTER - 2 for network servers it show server name as HASH/SQLEXPRESS, but not the main SQLSERVER.
COMPUTER -2
IP::::129.100.100.142
COMPUTER NAME::: FEROZ
MEMBER OF WORKGROUP
can anyone help me how to connect these two computers and remove this express edition
iam new to sqlserver configuration
thanks in advance
waiting for eager reply
View 1 Replies
View Related
Jul 23, 2005
We're running a simple network with a Windows XP Pro machine runningSQL Server. I have a VB application that runs fine on machines withinthe workgroup. There are several computers outside the workgroup butphysically reside on the network that generate OLEDB errors. I knowwith certainty it is establishing a connection to SQL Server. Theerror occurs on a SELECT statement. The user has read and writepermission to the database. I even tried giving the user Admin rightsjust as a test and it still generated the error. Is this a result ofthe cnmputer not being a member of the Workgroup? Thanks.Damon
View 4 Replies
View Related
Jan 4, 2006
How to establish connection string for sql server on non-domain network?
View 2 Replies
View Related
Feb 3, 2007
HI All,
After i installed SQL Server 2005 workgroups edition to my Laptop, P4 and 1 Giga memory. I had a problem.
my problem is: when i start my laptop need 4 minutes to start the windows xp pro edition.
then I format my laptop and install the windows again, and every thing works fine, but I installed the SQL again and i had same problem with windows startup, there is nothing related to SQL in ;msconfig utilities.
do you have any tip about this problem ?
Thank You
View 3 Replies
View Related
Sep 27, 2005
Hello -- Please excuse my extreme newbieness -- trying to get up to speed fast on SQL Server Express for work. I've been able to set up the software, create a database, and access it with no problems on my local computer, but I need to make the database available to other computers in my workgroup. I followed instructions -- enabled TCP/IP and Named Pipes and turned on SQL Server Browser, and I was actually able to manipulate one system database (the "master" database) from another computer but not any other databases, not even the other system databases. I can connect to any of the databases with the SQLCMD commands, but if I try to do any SELECT commands (other than in "master") I get an error: "SELECT permission denied on object '[MyTable]', database '[MyDatabase]', schema 'dbo'". I was only able to get into "master" after adding "guest" as a user, but adding this user to the other databases has no effect. One interesting thing: When I used the sp_table_privileges command on each database, all but "master" showed all privileges being granted to and from "dbo", but "master" didn't show anything being granted to or from anybody. Does anyone know what could be going on here? Am I missing something obvious? Thanks for any and all help!
View 1 Replies
View Related
Oct 5, 2006
Good day,
We have developed an application using VS 2005 and SQL Server 2005 Developer Edition.
Currently, our client is asking if they could buy the SQL Server 2005 Workgroup Edition.
Is it ok? I'm afraid that the SP we made using CLR and any other functionality might not work.
We are suggesting our client to use the SQL Server 2005 Standard Edition instead. But for them to save money, can they use the Workgroup Edition instead?
I would really appreciate your help.
Thanks and more power,
Arthur
View 3 Replies
View Related
Feb 2, 2007
I am putting up a website this month, its pretty complex in terms of the data being stored. We expect to have 1000 users in our first month and grow exponentially from there. In addition, users will be uploading content to the site (mostly jepgs and PDFs).
We currently have a dedicated server and need to decide whether to go with Microsoft SQL Server Workgroup or Standard. Any advice on this?
If we went with workgroup, what is the threshold for the number of users before we would have to switch to standard? Also...are there any huge limitations that would make our site fail if we went with workgroup?
thanks,
sb
View 8 Replies
View Related
Oct 29, 2007
I am trying to install the SQL Sever 2005 Workgroup Edition software that came with our Small Business Server 2003 R2 system. I would like to install to the d: drive because space on the c: drive is limited. Can I do that? If so, how?
View 1 Replies
View Related
Jul 5, 2007
Can any one tell me what I should do with following error :
I'm working with sql server 2005 workgroup and I installed SP2.
When I make a maintenance plan voor backup the databases (full) then at the end I got the following error !
save maintenance plan failed
One or more arguments are invalid.
I red this problem already on forums but I didn't get it resolved.
When I use sql server 2005 developer It worked fine !
Geert
View 1 Replies
View Related
Sep 9, 2006
i have SQL Server 2005 Workgroup Edition
how to connect to it from vb.net 2005 because i try but no use
thanks in advance.
View 4 Replies
View Related
Oct 26, 2007
Hi
I've recently gone through installing and setting up merge replication on Server 2005 Standard. All working.
I am now setting up a different box with SQL 2005 Workgroup with SP2. When I go to the Replication tab in Management Studio there is only Local Subscriptions - No Local Publications.
I've re-run the installation but I can't see how Publications is not getting installed orwhy it is missing.
Any ideas much appreciated.
Thanks
Alistair
View 6 Replies
View Related
Jul 20, 2005
Hi all,it happen to me a strange problem:i have a mdb file (in Access 2K) with SQL Server 2K linked tables whoruns on a workstation which is on a different domain that the SQLServer. It works.If i create a mdb file from a workstation which is a the domain of theSQL Server and then i run it a my non-domain workstation i have errormessage:Login failed for user '(null)'. Reason: Not associated with a trustedSQL Server connectionBut if i reattached my tables it works.If someone have an idea....PS: same ODBC on both machines
View 1 Replies
View Related
May 7, 2008
Does SQL Server 2005 Workgroup Edition have a limit to the number of user logins I can make?
View 1 Replies
View Related
Apr 4, 2007
I made an analysis services project but I can't deploy it because it can't find the server
I search for the analysis service in the Service Control Manager but I can't find it.
Is it possible to download and install it with this version of sql server (workgroup) ?
View 2 Replies
View Related
Aug 30, 2006
Hi,
I am new to SQL Server and I am trying to install SQL Server 2005 Express or Stnadard Edition on a computer runing XP pro on a XP's workgroup network using a router. Can I access the the database from another computer running XP pro on the same network? If I can, what setting do I need when installing SQL 2005 in order to do this?
Any help is appricated.
View 1 Replies
View Related
Jul 20, 2005
Hi all,Have a situation that my company has never run across before. Clientis running NT4 for the domain server, using terminal services 2000 andrunning an application with a SQL Server backend and they areexperiencing locking problems. Once one person gets locked out theneveryone trying to access that tables is also locked out as a result.It is not specific to a certain User, or module within theapplication. It's not a specific time of the day (like when a backupwould be running) and sometimes it's in the middle of the night whenthere are actually less Users on the system.We have 500 customers using this application. Most are using SQLServer backend, alot of the newer customers are using TerminalServices, and the number of Users is not accessive as compared to ourother customers. THe only difference is that I do not specificallyknow of another client with an NT4 Domain server in the mix.We actually switched to SQL Server as the recommended back end due tolocking issues using SQLBase because SQL Server is row locking andSQLBase is page locking. Since making this change we have stoppedseeing the locking for years until now. Is this a SQLServer issue orissue with the NT Domain server?Anyone have any ideas???ThanksA
View 3 Replies
View Related
Oct 23, 2007
I'm setting up a simple SSRS implementation for a non-profit organization, using two servers hosted at a data center. The first server has SQL Server Standard Edition and Reporting Services installed. I've designed and deployed a number of useful reports on this server.
I was hoping to isolate this first server by installing IIS and SSRS on the second server, have users browse from the Internet to that second server (over SSL, of course), and have all reports served up from databases (and, presumably, the report server database) on the first server.
During the installation of SSRS on the second server, however, I'm being prompted to specify the service account. According to the help text:
"Reporting Services. Service accounts are used to configure a report server database connection. Choose a domain user account if you want to connect to a report server database on a remote SQL Server instance. If you are using a local report server database, you can use a domain user account or Local System to run the service."
I believe I want to configure SSRS to connect to a report server database on a remote SQL Server instance; therefore, it appears that I need to enter a domain user account. The only problem is, neither server belongs to a domain; they are members of a simple two-server workgroup.
Does SSRS, configured to connect to a report server database on a remote SQL Server instance, require a domain? Does what I'm hoping to accomplish require a domain? Creating a two-server domain seems like overkill for this implementation, doesn't it?
I appreciate any comments and suggestions. Thanks!
View 1 Replies
View Related
Apr 4, 2007
Subject problem has me quite vexed.
I am receiving the following error when attempting to access reporting services... to sum things up real nice and tidy-
I get three login prompts - then the access denied response. It is almost as if it is unable to authenticate the user... anyway... here's the actual error response, I'd really appreciate any input/insight/resolution.
Server Error in '/Reports' Application.
Access to the path 'C:Program FilesMicrosoft SQL ServerMSSQL.2Reporting ServicesReportManagerin' is denied.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.UnauthorizedAccessException: Access to the path 'C:Program FilesMicrosoft SQL ServerMSSQL.2Reporting ServicesReportManagerin' is denied.
ASP.NET is not authorized to access the requested resource. Consider granting access rights to the resource to the ASP.NET request identity. ASP.NET has a base process identity (typically {MACHINE}ASPNET on IIS 5 or Network Service on IIS 6) that is used if the application is not impersonating. If the application is impersonating via <identity impersonate="true"/>, the identity will be the anonymous user (typically IUSR_MACHINENAME) or the authenticated request user.
To grant ASP.NET access to a file, right-click the file in Explorer, choose "Properties" and select the Security tab. Click "Add" to add the appropriate user or group. Highlight the ASP.NET account, and check the boxes for the desired access.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[UnauthorizedAccessException: Access to the path 'C:Program FilesMicrosoft SQL ServerMSSQL.2Reporting ServicesReportManagerin' is denied.]
System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) +2014163
System.IO.Directory.InternalGetFileDirectoryNames(String path, String userPathOriginal, String searchPattern, Boolean includeFiles, Boolean includeDirs, SearchOption searchOption) +1817
System.IO.Directory.GetDirectories(String path, String searchPattern, SearchOption searchOption) +36
Microsoft.ReportingServices.Diagnostics.Localization.GetInstalledCultures() +112
Microsoft.ReportingServices.Diagnostics.Localization..cctor() +66
[TypeInitializationException: The type initializer for 'Microsoft.ReportingServices.Diagnostics.Localization' threw an exception.]
Microsoft.ReportingServices.Diagnostics.Localization.SetCultureFromPriorityList(String[] localeList) +0
Microsoft.ReportingServices.UI.GlobalApp.Application_BeginRequest(Object sender, EventArgs e) +157
System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +92
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210
View 1 Replies
View Related
Feb 11, 2007
We have only a small busines and haven't got too much experience with servers and now have a proliant server coming in with SBS 2003 R2 Premium with the 4 GB max memory that SBS 2003 can handle according to the specs.
We weren't planning on using the SQL 2005 worlgroup edition up till now, but now we might. According to the specs of SQL server 2005 workgroup edition however, it has a max RAM of 3GB!
Is this going to be a problem and should we keep using our previous DB, or can we migrate toward SQL server with the 4 GB of RAM?
View 2 Replies
View Related
