I have a database that was autogrowing fine and now has stopped. I'm using MS SQL 7 and the database in question just reaced 32 gigabytes in size. That is the old db size limit but now it's 32 terabytes I thought. Has anybody heard of this ? Any ideas?
View 2 RepliesI'm currently running the command below and getting this error message. I am getting it every few seconds for a couple hours now. Seems to have started when I started this SPROC below. I'm just over 2 hours into running.
Not sure what this means yet, any help is much appreciated. Desperately trying to resolve this urgent matter!
thanks once again!
mike123
"Autogrow of file 'templog' in database 'tempdb' was cancelled by user or timed out after 2813 milliseconds. Use ALTER DATABASE to set a smaller FILEGROWTH value for this file or to explicitly set a new file size."
EXEC isp_ALTER_INDEX
@dbName = 'db1',
@statsMode = 'DETAILED',
@defragType = 'REBUILD',
@minFragPercent = 10,
@maxFragPercent = 100,
@minRowCount = 1000
We are running Microsoft SQL 2005 Express.
All queries on our Production database are timing out. Viewing the error log file the following show up over and over again:
Autogrow of file 'tempdev' in database 'tempdb' was cancelled by user or timed out after 3937 milliseconds. Use ALTER DATABASE to set a smaller FILEGROWTH value for this file or to explicitly set a new file size.
Autogrow of file 'Prod' in database 'Production' was cancelled by user or timed out after 33156 milliseconds. Use ALTER DATABASE to set a smaller FILEGROWTH value for this file or to explicitly set a new file size.
Our production database is about 1 gig in size with 3.5 million records. I tried setting the autogrow from 30% which it was before to 100MB, but no luck, still timing out and getting the errors above. Permission should be all good, nothing has changed.
There is about 50gigs of available disk space as well, so that's not the problem. Thanks for the help.
Afternoon
I'm getting the below error message:
Autogrow of file 'FORMS' in database 'FORMS' cancelled or timed out after 30547 ms. Use ALTER DATABASE to set a smaller FILEGROWTH or to set a new size.
FORMS.LDF file is 7613952 KBand the growth is 512MB .
By how much should I set the filegrowth? The users are complaining that the application is freezing on them.
This is sqlserver 2000.
Good Morning,
I am having a problem where I have a process that seems to fill up the database but the database does not seem to grow like it should. The database is set to autogrow by 10%... the database is around 15-16GB and it is right over 16GB when it fails. This happens once a week lately. nothing on the server has changed.
the strange thing is when you look at the database properties through EM it shows as no space available but when you do a shrink file and look at the log and data files there are over almost 2GB free on the data file and 1GB free on the log... it does no make sense...
in order for EM to show there is free space I have to add over 5GB to the data file and 1.5 GB to the log file. then processes continue...
is there something that I am missing??
Is there a way that I can get SQL Server to tell me (Alert?) when it has grabbed another chunk of space for a database that has the "Automatically grow file" option set?
View 1 Replies View RelatedHi,
I've been looking over quite a few of the sql server installations at my new job and I have been noticing that most of them are set up to autogrow the data-files by 1MB unlimited and the log-files by 10% unlimited which is the default settings when creating a new database in SSMS. This is regardless of the database size which in some cases are 400+ GB. I've usually set autogrow to a fixed MB value of around 20% of the current size, but autogrowing a 400GB database by 20% will take a considerable amount of time and could be a killer during peak hours. What would you guys recomend...?
--
Lumbago
Hello Folks,Last evening, as a result of our autogrow settings, our productiondatabase grew from 102 GB to 107 GB. What puzzled me is that, prior tothe growth, we still had a good 10% free space left in the data file.My understanding is that SQL Server will automatically grow a databasewhen worker thread decides that more space is necessary to fulfill arequest. We don't suspect the app of sending over a request whichwould require that much more space.Any ideas on why the file grew unexpectedly?Thanks,Joe
View 1 Replies View Relatedi had a problem with a server instance where an app processing a file and putting the data into the database using a stored procedure was timing out. the app is a service and in the case of errors, will try to process the file until it has been succesfully added data to the database. in the event viewer i keep seeing this message during this timeout period:
"Autogrow of file 'mydatabase_log' in database 'mydatabase' was cancelled by user or timed out after 15687 milliseconds. Use ALTER DATABASE to set a smaller FILEGROWTH value for this file or to explicitly set a new file size."
is there a possibility that this process was causing my SP to timeout? are there any other log or debug files that SQL Express creates that might be helpful in discovering what caused the timeout? currently the log is at... ouch 10gigs restricted... maybe trying to autogrow from this while restricted is hogging resources?
We replicate a SQL2000 database (DataBaseA) to a SQL2000 database (DataBaseB) by using the Restore function and hasn't change its logical name but only the physical data path and file name. It is running fine for a year. We use the same way to migrate the DataBaseB to a new SQL2005 server with the Restore function and the daily operation is running perfect. However, when we do the Backup of DatabaseB in the SQL2005, it just prompt the error message
System.Data.SqlClient.SqlError: The backup of full-text catalog 'DataBaseA' is not permitted because it is not online. Check errorlog file for the reason that full-text catalog became offline and bring it online. Or BACKUP can be performed by using the FILEGROUP or FILE clauses to restrict the selection to include only online data. (Microsoft.SqlServer.Smo)
Please note we left the DataBaseA in the old SQL2000 server.
Please help on how we can delete the Full-text catalog from DatabaseB so we can do a backup
Many Thanks
I have database on localhost and i want to show this data on my website. I want to create a database online and want to sync with Local Host. Can it be possible syncing data automatically after some interval?
View 6 Replies View Relatedyes,I have an error, like 'The database file may be corrupted. Run the repair utility to check the database file. [ Database name = SDMMC Storage Cardwinpos_2005WINPOS2005.sdf ]' .I develope a program for Pocket Pcs and this program's database sometimes corrupt.what can i do?please help me
View 4 Replies View RelatedI want to create a duplicate database in sql 2000 using asp.net from a webform
I created a database using CREATE DATABASE .......
But how to copy tables, views, stored procedures to newly created
database from old using asp.net from webform
Is there any another method to create a duplicate database with another name
from existing database on same server ?
Greetings, I have just arrived back into the country (NZ) and back into ASP.NET.
I am having trouble with the following:An attempt to attach an auto-named database for file (file location).../Database.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
It has only begun since i decided i wanted to use IIS, I realise VWD comes with its own localhost, but since it is only temporary, i wanted a permanent shortcut on my desktop to link to my intranet page.
Anyone have any ideas why i am getting the above error? have searched many places on the internet and not getting any closer.
Cheers ~ J
I have a problem when i restore my .DAT_BAK file. I am getting error like "The backup set holds a backup of a database other than existing database. Restore Database is terminating abnormally".
I tried by using
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH MOVE 'VZAI_DATA' TO D:PROGRAM FILES..MSSQLTEST.MDF',
MOVE 'VZAI_LOG' TO D:PROGRAM FILES..MSSQLTEST.LDF',
REPLACE
And also i tried like
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH REPLACE
When i use like this,
RESTORE FILELISTONLY FROM DISK = 'D:DATAMYTEST.DAT_BAK'. I am able to get the output as LogicalName, PhysicalName, Type, FileGroupName, Size, etc.
Can i anyone please help me out?
Thanks in Advance,
Anand Rajagopal
I am using SQL express and Visual web developer on windows Vista.
When I try to create a new database the following message appears.
CREATE DATABASE permission denied in database master (error 262)
I log on to my computer as an administrator.
Help appreciated
Prontonet
Hi all,
From the http://msdn.microsoft.com/en-us/library/bb384469.aspx (Walkthrough: Creating Stored Procedures for the Northwind Customers Table, I copied the following sql code:
--UpdateSPforNWcustomersTable.sql--
USE NORTHWIND
GO
IF EXISTS (SELECT * FROM sysobjects WHERE name = 'SelectCustomers' AND user_name(uid) = 'dbo')
DROP PROCEDURE dbo.[SelectCustomers]
GO
CREATE PROCEDURE dbo.[SelectCustomers]
AS
SET NOCOUNT ON;
SELECT CustomerID, CompanyName, ContactName, ContactTitle, Address, City, Region, PostalCode, Country, Phone, Fax FROM dbo.Customers
GO
IF EXISTS (SELECT * FROM sysobjects WHERE name = 'InsertCustomers' AND user_name(uid) = 'dbo')
DROP PROCEDURE dbo.InsertCustomers
GO
CREATE PROCEDURE dbo.InsertCustomers
(
@CustomerID nchar(5),
@CompanyName nvarchar(40),
@ContactName nvarchar(30),
@ContactTitle nvarchar(30),
@Address nvarchar(60),
@City nvarchar(15),
@Region nvarchar(15),
@PostalCode nvarchar(10),
@Country nvarchar(15),
@Phone nvarchar(24),
@Fax nvarchar(24)
)
AS
SET NOCOUNT OFF;
INSERT INTO [dbo].[Customers] ([CustomerID], [CompanyName], [ContactName], [ContactTitle], [Address], [City], [Region], [PostalCode], [Country], [Phone], [Fax]) VALUES (@CustomerID, @CompanyName, @ContactName, @ContactTitle, @Address, @City, @Region, @PostalCode, @Country, @Phone, @Fax);
SELECT CustomerID, CompanyName, ContactName, ContactTitle, Address, City, Region, PostalCode, Country, Phone, Fax FROM Customers WHERE (CustomerID = @CustomerID)
GO
IF EXISTS (SELECT * FROM sysobjects WHERE name = 'UpdateCustomers' AND user_name(uid) = 'dbo')
DROP PROCEDURE dbo.UpdateCustomers
GO
CREATE PROCEDURE dbo.UpdateCustomers
(
@CustomerID nchar(5),
@CompanyName nvarchar(40),
@ContactName nvarchar(30),
@ContactTitle nvarchar(30),
@Address nvarchar(60),
@City nvarchar(15),
@Region nvarchar(15),
@PostalCode nvarchar(10),
@Country nvarchar(15),
@Phone nvarchar(24),
@Fax nvarchar(24),
@Original_CustomerID nchar(5)
)
AS
SET NOCOUNT OFF;
UPDATE [dbo].[Customers] SET [CustomerID] = @CustomerID, [CompanyName] = @CompanyName, [ContactName] = @ContactName, [ContactTitle] = @ContactTitle, [Address] = @Address, [City] = @City, [Region] = @Region, [PostalCode] = @PostalCode, [Country] = @Country, [Phone] = @Phone, [Fax] = @Fax WHERE (([CustomerID] = @Original_CustomerID));
SELECT CustomerID, CompanyName, ContactName, ContactTitle, Address, City, Region, PostalCode, Country, Phone, Fax FROM Customers WHERE (CustomerID = @CustomerID)
GO
====================================================================================
I executed the above code in my SQL Server Management Studio Express (SSMSE) and I got the following error messages:
Msg 911, Level 16, State 1, Line 1
Could not locate entry in sysdatabases for database 'NORTHWIND'. No entry found with that name.
Make sure that the name is entered correctly.
===============================================================================================================
I know I recreated the NORTHWIND Database from a different Database before and I did not do anything for the entry in sysdatabases. How can I change the entry in sysdatabases for database 'NORTHWIND' now? Please help and advise.
Thanks in advance,
Scott Chang
hii want to copy one database table to onther database table using script?my database is ms-sql server 2000
View 4 Replies View RelatedI recently added a new user to my database. Now I want to delete that user, but I keep getting the error above. What do I need to do to delete my recently added user?
View 4 Replies View RelatedWe have a SQL database that uses Active Directory with Windows Authentication. Can users that are members of the Active Directory group that has read/write access to the SQL database create ODBC connections to access the database directly and update the data? They dont have individual logins on the server. They are only members of the Active Directory group that has a login?
View 1 Replies View RelatedI had to to relocate the database log file and I issued an Alter database command but by mistake I put a space in the file name as below. The space is at the beginning file name. Now I am unable get the database loaded to SQL Server. The database has 2 replications configured, so deleting and re-attaching the database means the replication needs to be re-configured. Is there an alternative way to issue a command to update the database FILENAME ? Not sure if this can be edited in master database (sys files).
ALTER DATABASE [User_DB]
MODIFY FILE (NAME = User_DB_log, FILENAME = 'I:SQLLogs User_DB_log.ldf')
GO
I created the db with the attached script and I am able to access ituntil I reboot the server. I've tried enabling flag 1807 via the SQLserver service and the startup parameters of the instance. In allcases the database always come up suspect after a reboot. There wasone instance where I was able to recover, but I am not sure how thathappened.Does anyone have an idea of how I can reboot the server without thedatabase becomming suspect?USE MASTERGODBCC TRACEON(1807)GO--DBCC TRACEOFF(1807)--DBCC TRACESTATUS(1807)GOCREATE DATABASE ReadyNAS ON( NAME = ReadyNAS_Data,FILENAME = '\NAS1NASDiskSQL ServerReadyNASReadyNAS_Data.mdf',SIZE = 100MB,MAXSIZE = 20GB,FILEGROWTH = 20MB)LOG ON ( NAME = ReadyNAS_Log,FILENAME = '\NAS1NASDiskSQL ServerReadyNASReadyNAS_Log.ldf',SIZE = 20MB,MAXSIZE = 100MB,FILEGROWTH = 10MB)
View 5 Replies View RelatedHi all,
I downloaded and ran AdventureWorks.msi into my SQL Server Management Studio Express (SSMSE) one year ago.But I did not know how to attach it to my SSMSE then. Last week, I deleted it from the "Add or Remove" of Control Panel and I downloaded the new AdventureWork.msi and installed it my SSMSE. Today, I tried to use the Database Explorer of VB 2005 Express for the first Stored Procedure programming. I clicked on AdventureWorks.mdf and I got the following error: One or more files do not match the primary of the database. If you are attempting to attach a database, retry the operation with the correct files. If this is an existing database, the file may be corrupt and should be restored from a backup. Cannot open user default database. Login failed. Login failed for user 'CENADe1enxshc'. Log file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataAdventureWorks_Data_log.ldf' does not match the primary file. It may be from a different database of the log may have been rebuilt previously. Please help and advise me how to correct this problem.
Thanks,
Scott Chang
I have installed 2 SQL Server 2005 Express sample databases from 2 books, ASPnet 2.0 and ADOnet 2.0. The ASPNETDB.MDF was shown in App_Data and Database Explorer, but not in the SQL Server Management Studio Express. The AdoStepBy Step database created by a ConfigDB.exe was displayed in the Management Studio, but not in the App_Data, or Database Explorer.
Is this the way SQL Server 2005 runs the 2005 databases for SQL Server 2005 Express only? Or also in SQL Server 2005?
TIA,
Jeffrey
I am setting up SQL audit on sql servers in my environment based on requirement. I want to create database specifications ASAP database created. I tried DDL trigger but Audit doesn't support triggers. So I created audit specifications on model database. the only problem with this is every specification created on new database with same name.database specification name includes newly created database name or other methods to create database specifications on newly created databases.
View 6 Replies View RelatedI am new to SSIS. I have been struggling with this for the past one week. I have a weird task. I need to import several tables from one database to a different server with a new database name. We need to do this at the end of every year. The main problem here is that the number of tables varies every year. You may not have all the tables as last year or may have more tables. So I need to create a dynamic task that takes care of this every year without changing the package.
I have performed the following tasks **
1. Create a new dynamic database. ( I have used Execute SQL Task to do this) 2. Copy all the table structures ( I have used Execute SQL Task to do this)
3. Import Data. This is the main problem. I was trying to create a dynamic connection string with variables as suggested in several forums but I finally came to know that this cannot be done if the table structures are different as the metadata cannot be refreshed at runtime.
4. The final step to create a process to validate the data (the count from each table for both source and destination. I think this can be done with Sql task.
What is the best method to do this? My DBA does not like “Transfer SQL Objects Task” or “transfer Database Task”. I would like to create this as a dynamic process.
I have a medical records system, SoapWare v4.90, that uses MSDE (SQL2000) databases. Due to the 2gb limitation, I am trying to migrate over to SQL 2005 (Standard or Express) which I have heard works fine. The SoapWare has a datamanager that allows me to log in to the MSDE instance, detach the SoapWare databases from msde (as well as do backups, etc) which I can confirm are detached.
Then I log back into a SQL2005 database instance using the datamanager and try to attach the database. This is what their pictured instructions demonstrate. However, I get the following error:
Database 'sw_charts' cannot be upgraded because it is read-only or has read-only files. Make the database or files writeable, and rerun recovery.
Of course, some of the entries will be read only, since doctors have to sign off the charts and are not allowed to subsequently change them. But I should still be able to switch over to sql 2005?!?!?!?
Or... is there a way to attach the databases to SQLExpress manually?
Help pls?
Hi all
Iam working in Prodcution ENV,Please help how make space
The log file for database 'Home_alone' is full. Back up the transaction log for the database to free up some log space.
Dear All,
i have a question abt winCE 4.2 and SQL server CE.
i am using VB.net of Visual Studio 2005
My platform is using a PDA with winCE 4.2 and SQL server CE. The Host program is using dbf files on desktop side.
I got a problem of how to sync / read the sql CE data from a windows application.
so, i wanna ask,
1. any method to access the data from winCE data by windows application? or can i convert the sdf file to windows readable files? or any others?
2. Can i use a MDB to sync with SQL server CE?
can i synchronize the mobile device which has a SQL Server CE database with the Access database on the desktop?
last question,
3. is that windows CE .net 4.2 not support pocket access (cdb) anymore?
please help me out
Hi all (newbie @ asp.net)(oldie @ ASP 3)What is the purpose of using an attached MDF database files in the App_Data folder on a web site as to importing it into the SQL server directly or creating it on the SQL server. Does a mdf database attached file purely use the SQL server as a connection interface.Is it something similiar to DSN(ODBC) Connections for ms access databases.
View 2 Replies View RelatedUsing SQL Server Express 2005, I have two databases. AppDB - The main application database.GeoDB - A somewhat static ZIP code / states / other geographic stuff databaseI need to have some foreign key columns in tables in AppDB reference columns in the GeoDB database tables. Eventually other application database besides AppDB will be doing the same thing in our infrastructure. After googling and reading for days, here is what I
think I know:You cannot create foreign keys that reference tables in another database in SQL Server.You
cannot create foreign keys that reference columns in a view, and you definitely cannot make an index on a view that has base tables in another database.You can create a trigger that references tables in another database, but this can be flaky? (nested/recursive trigger problem).SQLServer
2005 supports multiple schemas within the same database. Maybe I should logically separate my databases this way? Seems like it would be a tough solution to manage since I already have some databases live in production that will eventually use this 'static' GeoDB. Also, seems like it
wouldn't be as portable as keeping the GeoDB info in its own database,
but maybe I'm being too software engineer-ish here - afraid of low
cohesion, high coupling.I will greatly appreciate any advice I can get, or any more options I am missing. Thanks,Adam Nofsingerucnmedia.com
Hi all,
I have to change the date format for one database in a group of databases in my sql server 2000,Can you please tell me how to change the date format.
thanks in advance
I'm taking a database(read-only) backup from one server and restoring it on other server. As soon as restore is done it is bringing database into single-user read-only mode.
why it is bringing the database into single user mode ?