SQL 7 Database Inaccessible After Restore Was Cancelled Mid Stream
May 24, 2001
Hi,
I have a problem with a database on our SQL 7 system . I had set away a restore from tape, but cancelled it after users complained that a different database was performing slowly . However, this has resulted in the database being marked as inaccessible when trying to access it through SQL Enterprise Manager and trying to access it through Query Analyser produces message 927 informing me that the database is in the middle of a restore . How do I remove this error and make the database accessible again??
Many thanks in advance
Peter Burton
(IT Support)
Durham Aged Mineworkers Homes Association
View 1 Replies
ADVERTISEMENT
Apr 27, 2007
I have seen this before. A 2000 restore fails, leaving the database thinking it is being restored but the restore job failed and errors when it is restarted. EM is clueless. I believe there is a proc to reset some flag. Can you share it with me???
Thanks!
View 4 Replies
View Related
May 22, 2006
I've read the other posts related to this issue, but I'm just REALLY confused as to whats happening in my case. Like everyone else it was working fine in SQL 2000 but now in SQL 2005 there is an issue. I'm calling a stored procedure with parameters defined like this:
@action varchar(10),
@GLTransactionID int = NULL OUTPUT ,
@GLBatchID int = NULL ,
@GLAccountID int = NULL ,
@CurrencyID int = NULL ,
@LocalDebit decimal(28, 13) = NULL ,
@LocalCredit decimal(28, 13) = NULL ,
@BaseDebit decimal(28, 13) = NULL ,
@BaseCredit decimal(28, 13) = NULL ,
@TransID int =NULL,
@Description varchar(255) = NULL
I am calling this proc from VS.NET 2003 using the .Net SqlClient Data Povider (C#). I'm setting the values of the parameters like this:
cm.Parameters.Add("@action", "insert");
cm.Parameters.Add("@GLBatchID", _gLBatchID.DBValue);
cm.Parameters.Add("@GLAccountID", _gLAccountID.DBValue);
cm.Parameters.Add("@CurrencyID", _currencyID.DBValue);
cm.Parameters.Add("@LocalDebit", _localDebit.DBValue);
cm.Parameters.Add("@LocalCredit", _localCredit.DBValue);
cm.Parameters.Add("@BaseDebit", _baseDebit.DBValue);
cm.Parameters.Add("@BaseCredit", _baseCredit.DBValue);
cm.Parameters.Add("@TransID", _transID.DBValue);
cm.Parameters.Add("@Description", _description.DBValue);
When I execute the call to the stored proc I get this:
"The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. Parameter 8 ("@BaseDebit"): The supplied value is not a valid instance of data type numeric. Check the source data for invalid values. An example of an invalid value is data of numeric type with scale greater than precision."
Using the VS.NET command window I then inspect that parameter to see what the heck is going on and get this:
?cm.Parameters["@BaseDebit"].SqlDbType
Decimal
?cm.Parameters["@BaseDebit"].Precision
0
?cm.Parameters["@BaseDebit"].Scale
22
?cm.Parameters["@BaseDebit"].DbType
Decimal
?cm.Parameters["@BaseDebit"].Value
1000000
[System.Decimal]: 1000000
So I set a decmial parameter to 1,000,000, that parameter in the DB is defined as decimal(28,13) so should fit no problem, but it seems the Sql data provider is confused and thinks 1,000,000 is decimal (0,22)???
View 5 Replies
View Related
Apr 6, 2008
I receive this error when I make a depolyment to our new server(virtual server).
The report works fine in the report manager. In my application, I use RenderStream method to retrieve the images and embed in the webform. I googled it and found some people having the same issue because of the cookie, so they set 'UseSessionCookies' = false in the table ConfiurationInfo of ReportServer database. I tried this, but no luck.
Also, there is a hotfix from Microsoft http://support.microsoft.com/kb/913363.
I have requested a copy, but not sure whehter it's gonna be helpful.
Any clues or suggestions weclome.
Thanks
View 18 Replies
View Related
Jun 30, 2015
I am not MS SQL Developer, and I have no experience with it. I have had to use it as a part VAMT database of keys and activation.
There is 8.1 box with MS SQL (express I think).
After change host name I cannot connect to database with error "The specified database is not a valid VAMT database."
Looking into log gives me: Could not obtain information about Windows NT group/user 'litkjonca', error code 0x534."
Some googling suggest to use:
sp_dropserver "..." and sp_addserver '...', local
but with no effect .
View 17 Replies
View Related
Aug 12, 2015
Been practicing DR strategies with a test SQL instance by following the scenarios listed here: [URL] ....
> Took a backup of the Model database
> Stopped SQL Server
> Deleted model database data & log file
> Started SQL Server and it obviously wouldn't start because TempDB needs a model database present.
> Started SQL instance with trace flags 3608 & 3609
> Connected to SQL instance using command prompt.
> Issued restore command but was met with this error:
Shared Memory Provider: The pipe has been ended.
Communication link failure
And found this in the SQL log..
2015-08-12 16:21:32.83 spid51 Starting up database 'tempdb'.
2015-08-12 16:21:36.88 spid51 Error: 3456, Severity: 21, State: 1.
2015-08-12 16:21:36.88 spid51 Could not redo log record (59:136:21), for transaction ID (0:0), on page (1:20), allocation unit 458752, database 'tempdb' (database ID 2). Page: LSN = (30:165:3), allocation unit = 458752, type = 1.
[Code] .....
View 9 Replies
View Related
Aug 4, 2015
How to fix this SQL error event logg 17204 and 17207 ?
View 8 Replies
View Related
May 27, 2008
We are running Microsoft SQL 2005 Express.
All queries on our Production database are timing out. Viewing the error log file the following show up over and over again:
Autogrow of file 'tempdev' in database 'tempdb' was cancelled by user or timed out after 3937 milliseconds. Use ALTER DATABASE to set a smaller FILEGROWTH value for this file or to explicitly set a new file size.
Autogrow of file 'Prod' in database 'Production' was cancelled by user or timed out after 33156 milliseconds. Use ALTER DATABASE to set a smaller FILEGROWTH value for this file or to explicitly set a new file size.
Our production database is about 1 gig in size with 3.5 million records. I tried setting the autogrow from 30% which it was before to 100MB, but no luck, still timing out and getting the errors above. Permission should be all good, nothing has changed.
There is about 50gigs of available disk space as well, so that's not the problem. Thanks for the help.
View 51 Replies
View Related
Aug 15, 2015
I was putting a database together (its a C# application MSSQL)  the application will handle a few hundred customers records and save  maybe a couple of thousand  word docs/images/other doc files wondered if the way to go was blob or filestream, I see the medium and larger databases seem to go for filestream but just wondered as not much mentioned about smaller dbs.I do not think  security/disk space/super fast access  will be a big issue.
View 4 Replies
View Related
Jun 26, 2007
Afternoon
I'm getting the below error message:
Autogrow of file 'FORMS' in database 'FORMS' cancelled or timed out after 30547 ms. Use ALTER DATABASE to set a smaller FILEGROWTH or to set a new size.
FORMS.LDF file is 7613952 KBand the growth is 512MB .
By how much should I set the filegrowth? The users are complaining that the application is freezing on them.
This is sqlserver 2000.
View 6 Replies
View Related
Nov 21, 2007
Has anyone seen this error related to SSIS? I get this everytime I try to perform any action on (import, export, or run) a file system package. I am racking my brain and I would prefer not to perform a full reinstall, but I am not seeing any posts that have helped with this error.
Unable to cast object of type 'Microsoft.SqlServer.Dts.ObjectExplorerUI.ImportPackageAsAction' to type 'Microsoft.SqlServer.Dts.ObjectExplorerUI.ISimpleAction'. (Microsoft.SqlServer.DtsObjectExplorerUI)
View 7 Replies
View Related
Jan 8, 2008
Something strange just happened to my database.Windows Vista UltimateSQL Server 2005 SP2IIS 7.0I just did an insert into a few tables from my ASP.NET application that I'm building and I suddenly cannot query the database tables. The query window just spins and finally times out.So I decided to try a SELECT TOP and tried 100, nothing, then 10, nothing, then 1 and it returned the first row. Then I tried 2 and got that, and I remember this table had 8 rows prior to my last Insert, and once I tried to select TOP 9, it times out again.Does anyone knows why this happened and how to fix it? It's like every row past 8 either doesn't exist or got corrupted somehow. I can't even drop the table and rebuild it. SQL Server won't let me. If someone doesn't have a solution, I'll have to rebuild the entire database and I'd rather not have to do that.Any help would be appreciated.Thanks,Kahanu
View 2 Replies
View Related
Jun 17, 2008
Msg 945, Level 14, State 2, Line 1
Database 'Northwind' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details.
I keep getting that error for just trying to USE Northwind. I don't understand why this problem is occurring. It was working fine for the past few weeks. Yesterday something happened to the DB and it said something about recovery to which I accidentally clicked cancel. From then on I can't access some of the DB that I have on my computer.
I'm fairly new to the SQL Server Environment so I would appreciate any and all help that can be provided. I've google searched the details but I can't seem to get any of those to work. Thanks in advance for your reply.
View 2 Replies
View Related
Dec 21, 2007
Hi All,
Does anyone knows what is the reason behind following error ? And resolution for that ?
Server: Msg 945, Level 14, State 2, Line 1Database 'Blaster' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details.
Thanks in advance,
--kneel
View 1 Replies
View Related
Oct 18, 2006
Hi,
I'm trying to transfer data from a DB2 database to a MS SQL Server database (approx. 150 000 rows).
When I execute the package, the process is always cancelled (In output window: SSIS package "DB2_test_TranAddl.dtsx" finished: Canceled.)
I use a view on DB2 to provide the data and I can modify it to return only a few rows. To achieve this, I use a WHERE clause: WHERE OUTLET_NO Between X And Y.
When I try OUTLET_NO Between 1 And 5 (255 rows) the package executes successfully.
When I try OUTLET_NO Between 5 And 10 (388 rows) it works.
When I try OUTLET_NO Between 1 And 10 (643 rows) it fails!!
Any idea?
View 10 Replies
View Related
Jul 2, 2007
Please help.
I created a linked server with Oracle Provider for OLE DB to Oracle Database from SQL Server 2000 SP 4. Afterwards I created Views from this linked server and granted SQL Server users "select" access to the Views.
Unfortunately when they try to access the views the following error message was generated (see the attached image - error.gif).
Can someone please explain to me what is wrong?
Thanks
Victor
View 7 Replies
View Related
Apr 19, 2007
Hello Guys,
I am currently experiencing a Sql error: operation cancelled by user.
I don't know where this error come from. Is it from ADO.NET or SQL Server 2000.
This error doesn't always occur. It only occurs when many users access the web site. I want to know who issue the error. Why issue the error.
Let me know if you have any ideas
Thanks in advanced
View 5 Replies
View Related
Jan 30, 2006
Hi,
I have scheduled a package "MyPackage" in a SQL Server Agent Job. It runs periodically with success.
Sometimes the package status is shown as "Cancelled" what led me to assume some coincidences.
So I took a look at the eventlog which contains the following message:
Event Type: Information
Event Source: SQLISPackage
Event Category: None
Event ID: 12290
Date: 30.01.2006
Time: 08:00:42
User: NT AUTHORITYSYSTEM
Computer: MYSERVER
Description: Package "MyPackage" has been cancelled.
I assume that the problem occurs when a user locally logs off from the Server where the SSIS-service is running.
Why does this happen? The Service runs under the local system account and so does the SSIS Job.
Can anybody help here?
THX
Fridtjof
View 4 Replies
View Related
Dec 19, 2007
Hi,
I have a trouble with script component. From time to time, I cannot see available data types of the column I´m just editing, in the Script component editor. The cell in the section Data Type properties, where normally combobox with data types is, is completelly black. This happens both with "old" script components I'm only viewing and new script component I'm creating.
This problem occured for the first time immediately after I migrated from Windows XP to Vista Bussiness 64bit and then several times without any obvious similarity among terms under which this appeared.
I have SP2 for SQL Server and SP1 for VisualStudio 2005 Professional edition installed.
Please, can you help me?
Thanks
Jana
View 11 Replies
View Related
Jul 31, 1999
When attempting to update or delete data using Microsoft Access, this error often occurs. The data can be updated or deleted directly through SQL Server and the problem is not resolved by closing and restarting access. The tables accessed have primary keys.
Any ideas?
It occurrs with both Access 2 and Access 95.
View 2 Replies
View Related
Apr 2, 2008
Started a publication on a few tables, and decided to cancel it. Now there are no publications set up, but the sharing hand is still there on the database, and agents all over the place. Boss is angry, can I tidy up this mess?
I can't convince him I haven't made changes to the production database...
View 12 Replies
View Related
Nov 5, 2007
Hi,
I am running two jobs background using SQL agent. There was a power shut down and the two job i was running in back groung were cancelled leaving the below message
The job was stopped prior to completion by Shutdown Sequence 0.
Can any one tell me why this happened although I am running them in back ground.
I am not sure where the servers are located and if they are located in the same bulding .. do u think it is bcoz of tis power shut down only?
View 6 Replies
View Related
Aug 9, 2006
We have a table in our legacy database system representing health insurance polices. The customer can, and usually does, renew the policy after 12 months. The legacy database uses the renewal string "99/99/9999" to signify "continuous until cancelled", in other words, "forever", or until cancelled
We need to convert this legacy table into a sql 2005 table, which supports the concept of "forever". But how can we do this? ("99/99/999" is not a valid sql date type and we don't want to use varchar for dates.)
TIA,
barkingdog
View 1 Replies
View Related
Jan 3, 2007
When I highlight a few
partitions and start processing, the process occasionally stops with a
message that operation has been canceled, like this:
Response 3
Server: the operation has been cancelled.
Response 4
Server: the operation has been cancelled.
Response 5
Server: the operation has been cancelled.
..etc...
(no further error message details are provided)
SQL profiler shows that batch was completed (but rowcount shown in process progress log is too small).
Analysis
Services profiler shows no messages at that time at all. It just shows
messages when it started, and when I restarted the processing.
The Analysis trace appears to be stopped when processing stops with "Server: the operation has been cancelled."This
is an occasional error and sometime occurs within 15-20 minutes from
starting to process. It could fail on 1st partition in the process list
, or on some partition in the middle. Some partitions might run for a
few hours and not error out, but sometimes it fails quickly.I was not sure if this is an issue with the underlying fact data, so I broke up the last partition where it failed into 5 smaller partitions, they processed OK separately.I think restarting SQL Server and SSAS helps to process a few more partitions. Some that failed with this problem process OK after restart, but some fail again.
(apologies for re-posting, wanted to put under more specific thread title)
View 19 Replies
View Related
Jul 28, 2006
I made a merge replication and sucessfully connected with mobile device. Everything works fine. Because I wanna try asynchronous synchronization (which won't stop my application executing when subscribing) I read How to example from MSDN :
http://msdn2.microsoft.com/en-us/library/ms172391.aspx
But there is a problem with creating SyncStatus class object. I can't get into it and I can't create. maybe some reference will help? (I use reference to SQLServerCE). This error stoped my work for now, so I am waiting for some answers.
And if it's simple resolution for this problem - sorry. I just started programming applications for Mobile Devices.
Best regards. Maciek Wysocki
View 3 Replies
View Related
Jul 24, 2001
What I'm trying to solve:
I have an application that generates SQL queries, and sometimes uses
DISTINCT where the result set has no dupe rows. In terms of database
resources, I'm trying to figure out if it's worth it to change to app to be
smart enough to not use DISTINCT where it won't serve any purpose, or
whether to let it do the DISTINCT and save added complexity to the query
building application. I.e. what is the cost of DISTINCT where there are no
dupe rows?
What I want to know:
Can someone explain how the stream aggregate operator actually goes about
doing its work?
Does this always create a temp table for sorting and discarding duplicates
(for DISTICNT)? If the answer is "no or sometimes", how does it do so in
the case where a temp table is not involved? I noticed the the estimated
I/O for this operator was zero for some queries I wrote agains pubs. Does
this mean that the optimizer believes the temp table needed will fit
in-memory and creates it in-memory? Or does the estimated I/O figure not
included disk writes for work tables?
tia for any info
Bill
View 1 Replies
View Related
Jul 28, 2004
Hi all,
I am just trying to establish if there is a way that I can capture a direct data stream(feed) from another server and have it input into a table.
The scenario is -
I have a PABX that is outputting a stream of data with each record being 83 characters long. Each of the fields is seperated by a space. The end of the record is distinguished by a "Line Feed". The port it is being sent to on my local machine is Port 5000.
Is this possible to do or not? I know that some of our DB guys who use oracle can do it, I would like to have this as a MSSQL database so that I can use it and manipulate it a bit further.
Thanks.
View 2 Replies
View Related
Oct 13, 2006
Hi everybody,
I dont know if this is the right place to put in this question.
The problem is
I have an application developed using VB 6.0 and SQl Server 2000. It was working fine on my machine. I had MS XP installed on my system alongwith SP1. But when i installed MS XP SP2, i got the error while saving the record.
the error is
"Protocol Error in TDS Stream".
I went to microsoft site searcing for the resolution of this error. They gave the solution of installing MDAC 2.8 SP1. But when i install MDAC 2.8, it gives me this error
"MDAC 2.8 RTM is incompatible with this version of Windows. All of its features are currently part of Windows."
And since MDAC 2.8 is not installed so i can not install MDAC 2.8 SP1 also.
I have MDAC 2.5 installed on the system.
How can i resolve it. Please give a solution as soon as possible. I am in great need of it.
View 1 Replies
View Related
Jul 20, 2005
Hi all,I am new to the ADODB.StreamI am using following codelRecordset.Open "Select * from <some table-name>"'this query return more than 1000 recordsdim lstream as new ADODB.stream'assigning the recordset data to the streamlrecordset.save lstreamlStream.Position = 0Dim lRecordset2 As New ADODB.RecordsetlRecordset2.Open lstreamMsgBox lRecordset2.RecordCountmy problem is that query is returning say 1500 records but when i amagain assigning the same stream to another recordset it is copyingonly 485 recordsthat is lstream is saving only 485 records...is there any size limiton stream...?how i can do this using stream only....If u have any solution plz reply back..Thanks in advance...
View 1 Replies
View Related
Nov 19, 1999
11/19
Trying to keep out sysadmins & sa during/between database RESTORE
Configuration:
WINNT Server Enterprise 4.0 w/SP5
SQL Server 7 Enterprise & SP1
2 SQL Servers:
Production Server
Standby server
I Backup (full backup) databases to disk on primary server (logical backup devices are physicaly located on a Standby server (dedicated gigabit NIC in each server for this process). Transaction logs are applied to the Standby server throughout the day.
Problem:
How to keep out "sa" and sysadmins from a database while I'm restoring (or between restores) to a standby server?
The database being restored cannot be in use during a restore.
If a DBA forgets that this process is happening, the statement fails (RESTORE)for the database they happen to be in at the time of the restore.
Example restore statement:
Standby Server -
RESTORE DATABASE databasename FROM database_dd WITH DBO_ONLY, REPLACE, STANDBY = 'g:Mssql7FromPrimaryDatabaseName_undo.ldf'
I could restrict Domain sysadmin access and change sa password. I could also put the database in "Single user" mode, however this could become problem if my process disconnects and then someone else connects - then my process is locked out. What I'm really looking for is to lock out all activity for a database that is in "standby mode" except for RESTORE processes.
Any ideas??
Wade
wadej@vailresorts.com
View 1 Replies
View Related
May 8, 2007
Hi,I have a problem which I don't entirely know how to tackle:Essentially, is it possible to query a web service (via http), usingsql server 2000, and then import that data in to the database?I have seen many posts on openxml and sql servers bulk load facilitiesbut nobody seems to mention whether you can open an http stream andread the xml in from there.Any help would be greatly appreciated.Thanks.
View 3 Replies
View Related
Apr 22, 2008
I have a very simple test report created in Visual Studio 2005 as an rdlc file in my dll. The rdlc file is in the dll because it is built off of the business objects. I need to be able to stream this file (i.e. not use a report viewer) to the browser.
I found code that I included below, but get an error:
The report definition for report 'Monkey.Report1' has not been specified
Yes my test namespace in my dll is named "Monkey" )
Anyway, any idea on how to solve this?
Code Snippet
using Microsoft.Reporting.WebForms;
protected void Page_Load(object sender, EventArgs e)
{
LocalReport localReport = new LocalReport();
localReport.ReportEmbeddedResource = "Monkey.Report1.rdlc";
ReportDataSource reportDataSource = new ReportDataSource("FamilyCollection", Monkey.Family.RetrieveAll());
localReport.DataSources.Add(reportDataSource);
string reportType = "PDF";
string mimeType;
string encoding;
string fileNameExtension;
string deviceInfo =
"<DeviceInfo>" +
" <OutputFormat>PDF</OutputFormat>" +
" <PageWidth>8.5in</PageWidth>" +
" <PageHeight>11in</PageHeight>" +
" <MarginTop>0.5in</MarginTop>" +
" <MarginLeft>1in</MarginLeft>" +
" <MarginRight>1in</MarginRight>" +
" <MarginBottom>0.5in</MarginBottom>" +
"</DeviceInfo>";
Warning[] warnings;
string[] streams;
byte[] renderedBytes;
//Render the report
renderedBytes = localReport.Render(reportType, deviceInfo, out mimeType, out encoding, out fileNameExtension, out streams, out warnings);
//Clear the response stream and write the bytes to the outputstream
Response.Clear();
Response.ContentType = mimeType;
Response.AddHeader("content-disposition", "attachment; filename=foo." + fileNameExtension);
Response.BinaryWrite(renderedBytes);
Response.End();
}
View 1 Replies
View Related
Mar 26, 2014
I am trying to enable the FileStream in SQL Server 2012 Enterprise Edition. I can successfully enable "Enable Filestream for Transact-SQL Access" but I am unable to enable "Enable Filestream for the file I/O access". Due to this I am unable to open the folder location of the filetable.
View 3 Replies
View Related
