I have an issue on SQL Agent and wish you to advice:
Servers Environment:
The SQL Server and SQL Agent Service is installed on clustered Server1 where the Integration Services (IS) is installed on Server2. Deployment of SSIS packages have been done on Server1 and IS on Server2 is pointing to it.
Case:
1. In SQL Managament Studio, connection on Database Engine is up on Server1, connection on IS is up on Server2.
2. Execution of all packages via IS connection on Server2 is working well. No issue on running.
3. SQL Agent Job is created under Server1. The job failed on running. Message from the Log File Viewer:
"The job failed. The Job was invoked by User domainhost. The last step to run was step 1 (tewst)."
"Executed as user: domainhost. ...n 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Code: 0xC0048020 Description: The version of component "Update to DB" (828) is not compatible with this version of the DataFlow."
I have created a job with several SSIS packages included in it. There is a failure when I schedule and run the job. Where can I find the information why it is failing? When I run the packages individually, they run fine. Thanks in advance.
HELP>>> I am getting desperate we recently had a failure which ended up wrecking my replication. The basic layout is from a source server -> Distribution Server then out to several other servers. Long story short the distribution database had to be moved to a new drive and I am now getting the following error message
The specified LSN (0003d4f0:0000721e:001b) for repldone log scan occurs before the current start of replication in the log (0003d63a:00002803:0001). (Source: fsdpdcis (Data source); Error number: 18768) --------------------------------------------------------------------------------------------------------------- The process could not set the last distributed transaction. (Source: fsdpdcis-DPDDATA-1 (Agent); Error number: 22017)
I have reinitialized all subscriptions on the fsdpdcis server and run subscription validation (with no response). The data did re-load during the reinitialization but does not seem to be getting updated. This is driving me crazy and I am desperate. Any suggestions would be greatly appreciated. I have search MS knowledge base with no results and BOL has not been any help so far.
I am running transactional replication between a pair of SQL Server 2005 machines using a remote distributor. Occasionally the log reader agent fails with the error
"Replication-Replication Transaction-Log Reader Subsystem: agent * failed. The process could not execute 'sp_MSpub_adjust_identity' on '*'."
The agent starts back up again almost immediately on its own with seemingly no problems. I haven't been able to find any documentation on this error from Microsoft. Any ideas?
It is not a permissions issue as the log reader agent (and all of the other agents at that) are running under windows accounts with domain admin access for the domain that both the publisher and the distributor SQL Servers are on. (I know, I know, that's horrible. I've only been here a week and a half and I just found out about this today, so I didn't have anything to do with such a glaring security issue.) All of the SQL Servers involved with the replication are still granting sysadmin access to the windows administrators group.
I have scheduled a job in SQL Server Agent, as it executes it fails Immediatly. The error history displays the following error details, which i copied from the log file
"Description: Unable to load the package as XML because of package does not have a valid XML format. A specific XML parser error will be posted.
The system cannot find the path specified.". This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format. End Error ... The package could not be f... The step failed."
I am using the File System Type to load my package.
I'm new to sql server administration so please show some understanding!
I installed sql server 2000 personal edition (upgrated to sp4) on an windows xp pro OS, but I cannot get the sql server agent service running. I get a message " the service did not start due to a logon failure". The server is my local pc, I'm using windows authentication and the login is "domain/loginname" where domain is my pc name.
Does it have to be installed on a server OS to have this service running?
D:WINDOWSMicrosoft.NETFrameworkv2.0.50727InstallUtil.exe SQLAgent.exe by running it from a command prompt.
and got an error that the system could not find the file or one of its components. It is a farily new install. I do not think I've lost any files any time.
I have a publisher, remote distributor and subscriber all running SS2000.
Under replication monitor on the distributor, under replication alerts i have enabled the "replication agent failure" alert. All i need to know is should this alert trigger if the distribution agent that runs on the subscriber not the distributor fails?
I have add occurences of the distribution agent failing and the alert is not triggerred, is this because it only triggers for the agents that run on the distributor, ie: snapshot and log reader agents?
After upgrading a server from SQL 2000 to SQL 2005, I can't get any SQL Agent jobs to run, giving logon failed messages. MSSQLSERVER and SQLSERVERAGENT services are set up to run as the same domain account which has administrative rights to the server and is a SQL login with the sysadmin role. For basic testing purposes, I created a test job that all it does is run a T-SQL command 'SELECT @@VERSION'. The job is also set to run as the same account that the Agent is running under. Below are the logs (with trace messages on) from the point of starting the Agent to my attempt to run the job (user and server names have been changed to protect the innocent):
2007-10-22 15:31:15 - ? [297] SQLServer Message: 15457, Configuration option 'show advanced options' changed from 0 to 1. Run the RECONFIGURE statement to install. [SQLSTATE 01000] (DisableAgentXPs)
2007-10-22 15:31:15 - ? [297] SQLServer Message: 15457, Configuration option 'Agent XPs' changed from 0 to 1. Run the RECONFIGURE statement to install. [SQLSTATE 01000] (DisableAgentXPs)
2007-10-22 15:31:15 - ? [297] SQLServer Message: 15457, Configuration option 'show advanced options' changed from 1 to 0. Run the RECONFIGURE statement to install. [SQLSTATE 01000] (DisableAgentXPs)
2007-10-22 15:31:15 - ? [100] Microsoft SQLServerAgent version 9.00.3042.00 (x86 unicode retail build) : Process ID 5168 2007-10-22 15:31:15 - ? [101] SQL Server TESTSERVER version 9.00.3042 (0 connection limit) 2007-10-22 15:31:15 - ? [102] SQL Server ODBC driver version 9.00.3042 2007-10-22 15:31:15 - ? [103] NetLib being used by driver is DBNETLIB.DLL; Local host server is 2007-10-22 15:31:15 - ? [310] 4 processor(s) and 3328 MB RAM detected 2007-10-22 15:31:15 - ? [339] Local computer is TESTSERVER running Windows NT 5.2 (3790) Service Pack 2 2007-10-22 15:31:15 - ? [431] Populating subsystems cache... 2007-10-22 15:31:15 - ? [432] There are 11 subsystems in the subsystems cache 2007-10-22 15:31:15 - ? [124] Subsystem 'TSQL' successfully loaded (maximum concurrency: 80) 2007-10-22 15:31:16 - ? [124] Subsystem 'ActiveScripting' successfully loaded (maximum concurrency: 40) 2007-10-22 15:31:16 - ? [124] Subsystem 'CmdExec' successfully loaded (maximum concurrency: 40) 2007-10-22 15:31:16 - ? [124] Subsystem 'Snapshot' successfully loaded (maximum concurrency: 400) 2007-10-22 15:31:16 - ? [124] Subsystem 'LogReader' successfully loaded (maximum concurrency: 100) 2007-10-22 15:31:16 - ? [124] Subsystem 'Distribution' successfully loaded (maximum concurrency: 400) 2007-10-22 15:31:16 - ? [124] Subsystem 'Merge' successfully loaded (maximum concurrency: 400) 2007-10-22 15:31:16 - ? [124] Subsystem 'QueueReader' successfully loaded (maximum concurrency: 400) 2007-10-22 15:31:16 - ? [124] Subsystem 'ANALYSISQUERY' successfully loaded (maximum concurrency: 400) 2007-10-22 15:31:16 - ? [124] Subsystem 'ANALYSISCOMMAND' successfully loaded (maximum concurrency: 400) 2007-10-22 15:31:16 - ? [124] Subsystem 'SSIS' successfully loaded (maximum concurrency: 400) 2007-10-22 15:31:16 - ? [129] SQLSERVERAGENT starting under Windows NT service control 2007-10-22 15:31:16 - + [260] Unable to start mail session (reason: No mail profile defined) 2007-10-22 15:31:16 - ? [174] Job scheduler engine started (maximum worker threads: 400) 2007-10-22 15:31:16 - ? [193] Alert engine started (using Eventlog Events) 2007-10-22 15:31:16 - ? [146] Request servicer engine started 2007-10-22 15:31:16 - + [396] An idle CPU condition has not been defined - OnIdle job schedules will have no effect 2007-10-22 15:31:16 - ? [110] Starting SQLServerAgent Monitor using '' as the notification recipient... 2007-10-22 15:31:16 - ? [133] Support engine started 2007-10-22 15:31:16 - ? [167] Populating job cache... 2007-10-22 15:31:16 - ? [297] SQLServer Message: 0, SQLServerAgent Monitor started successfully. [SQLSTATE 01000] 2007-10-22 15:31:16 - ? [168] There are 2 job(s) [0 disabled] in the job cache 2007-10-22 15:31:16 - ? [170] Populating alert cache... 2007-10-22 15:31:16 - ? [171] There are 0 alert(s) in the alert cache 2007-10-22 15:32:59 - ? [177] Job Test1 has been requested to run by User DOMAINmyaccount 2007-10-22 15:32:59 - ! [382] Logon to server 'TESTSERVER' failed (ConnAttemptCachableOp) 2007-10-22 15:32:59 - ! [382] Logon to server 'TESTSERVER' failed (ConnAttemptCachableOp) 2007-10-22 15:32:59 - ! [382] Logon to server 'TESTSERVER' failed (ConnAttemptCachableOp) 2007-10-22 15:32:59 - ? [184] Job completion for Test1 is being logged to sysjobhistory 2007-10-22 15:32:59 - ! [382] Logon to server 'TESTSERVER' failed (ConnAttemptCachableOp)
I have a package from SQL Server 2008 R2, that loads data from .xlsx file to database table.There are total 15 columns and 14000 rows in the .xlsx. The package runs fine in BIDS. But the same package in SQL Agent fails with error "omponent "Excel Source" (1)" failed validation and returned validation status "VS_ISBROKEN".
When I tried to run the package by deleting the half of the records for first 7000 rows it ran successfully in agent. Then the second half (last 7000 rows) also succeed from agent job. So, there is no issue with the data/datatypes.The agent job is able to run with record upyo 11000 rows in .xlsx. When I am running for 12000 rows it is failing.Is there any problem with the number of records in .xlsx or size through SQL Agent?
I am running the package from a Proxy account in sql agent job.
ERROR: Error: Executed as user: PROXY_ID. Microsoft (R) SQL Server Execute Package Utility Version 10.50.6000.34 for 32-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. Started: 10:36:09 AM Error: 2015-08-10 10:36:10.87 Code: 0xC0202009 Source: XX Connection manager "Excel Connection Manager 1"
Below the Error Log Reported in SQL Agent (64 bit SQLServer 2008R2 Enterprise Edition Service pack 2 ,32Core CPU Numa Node and 64GB Ram
[298] SQLServer Error: 10054, TCP Provider: An existing connection was forcibly closed by the remote host. [SQLSTATE 08S01] [298] SQLServer Error: 10054, Communication link failure [SQLSTATE 08S01] [165] ODBC Error: 0, A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online. [SQLSTATE 08001] [382] Logon to server '(local)' failed (ConnUpdateStartExecutionDate)
Is there a difference with sql replication between sql server 2005 64bit and sql server 2005 32bit? Both are on a Windows 2003 server. One is 32 bit and the other one is 64 bit. The first time I set up sql replication (test environment), it was on a 32 bit sql server. This worked fine. The second time I wanted to set up replication (live environment), it was on a 64 bit sql server. This didn't worked fine.
I can't call the sqlcesa30.dll file on the 64bit server with IIS. So I called the dll via a remote IIS server. This worked but gave me the following error when calling the following URL: http://domain/PDASYNC/sqlcesa30.dll?diag
SQL Server Mobile Server Agent Diagnostics 2007/07/31 14:26:55
General Information
Item Value
Server Name domain
URL /PDASYNC/sqlcesa30.dll
Authentication Type Anonymous
Server Port 80
HTTPS off
Server Software Microsoft-IIS/6.0
Replication Allowed
RDA Allowed
Logging Level 0
Impersonation and Access Tests
Action Status ErrorCode
Impersonate User SUCCESS 0x0
ReadWriteDeleteMessageFile FAILURE 80070003
SQL Server Mobile Modules Test
Module Status ErrorCode Version
SQLCERP30.DLL SUCCESS 0x0 3.0.5207.0
SQLCESA30.DLL SUCCESS 0x0 Unknown
Reconciler Test
Reconciler Status ErrorCode
9.0 Database Reconciler SUCCESS 0x0
8.0 Database Reconciler FAILURE 0x8007007E
SQL Server Module Versions
Module Version
sqloledb.dll 2000.86.1830.0
9.0 replrec.dll 2005.90.2047.0
9.0 replprov.dll 2005.90.2047.0
9.0 msgprox.dll 2005.90.2047.0
8.0 replrec.dll 2000.80.760.0
8.0 replprov.dll 2000.80.760.0
8.0 msgprox.dll 2000.80.760.0
After seeing this I looked up what ReadWriteDeleteMessageFile could mean. It appeared to be some NTFS acces problem. But when I checked the security settings, it all seemed to be ok.
Has anyone any idea what else to check? Or is sure that I must have done something wrong?
The SQL Server Agent (MSSQLSERVER) service on server started and then stopped. If i Manually start the services also SQL Server Agent services are stopping automatically.Though I selected Auto Restart SQL Server Agent if it stops unexpectedly, The services are stopping automatically.TCP/IP protocol was enabled for port 1433.Are there any setup I missed?
when I run a package from a command window using dtexec, the job immediately says success. DTExec: The package execution returned DTSER_SUCCESS (0). Started: 3:37:41 PM Finished: 3:37:43 PM Elapsed: 2.719 seconds
However the Job is still in th agent and the status is executing. The implications of this are not good. Is this how the sql server agent job task is supposed to work by design.
I am using ODBC to connect SQL Server 2000 + SP4 server runnig on Windows 2003 standard edition Server +SP1. But, sporadically my application server connectivity to DB fails and i receive the following error messages
[Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionWrite (WrapperWrite()). [Microsoft][ODBC SQL Server Driver][DBNETLIB]General network error. Check your network documentation.) In D:de.cpp 702 Apr 12 2006 20:34:47 [Microsoft][ODBC SQL Server Driver]Communication link failure) In D:de.cpp 702 Apr 12 2006 20:34:47 20071017 08:23:10 TID (00000ff0) Sev (3) Err (0) Msg (Read failure. General SQL error.
Strange thing is that i receive this error only sporadically, Please Please advice !
I would appreciate any help here at all. I am pulling my hair out!
I am unable to start the snapshot agent or log reader agent from within SQL management studio. it fails on executing step 2 with unknown username or bad password.
I have checked all account details and they are correctly using my domain admin account. I can connect to SQL using teh same account and it also has sysadmin permissions.
If i copy the step 2 paramters and start from the cmd prompt (again logged in using the same domain account) they both start fine.
I am testing peer to peer replication in our environment. I simulated a three node peer to peer topology and a local distributor.
For some wierd reason I cannot get the Log Reader Agent and snapshot agent to start. The domain account under which SQL Server Agent runs has administrator previlage on the box. I also use a domain account for SQL Server Service. (none of the passwords changed).
This is the error I am getting - "Executed as user: abc. A required privilege is not held by the client. The step failed"
We just moved source server to newer, bigger box ... Windows 2003 and Active Directory ... Snapshot agent worked but distribution failed ... Same login as on older machine, login is sysadm, used DCOMCNFG to allow ability to launch process ... What are we missing?
Hi, I have copied my first web site to our web server, the web site is secured using AspNetSqlProvider. I have attempted to browse the site from IIS tree and I am redirected to the logon page as expected. The autentitcation is attempted and fails with: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) The database is in the app_data file, why is it not found? Regards, JoeBo
Whats happens when moving a sql server database to another sql server database and the DTS fails. Does it copy half the data or it doesn't copy any data????
Does anyone have some suggestions as to why my scheduled recurring DTS packages keep failing to run? I can manually execute the package and it works just fine but I don't know why the schedule job fails and there is not enough information in the error log to help me figure out what I have missed. The DTS is copies a CSV file from a different server into an existing table in my Database. The DTS has the following steps Truncate the table, Copy and import the text file into the table and Finally send me an email if it completes the task.
I have the package and the SQL Agent Service accounts set to my NT Account, which has admin rights
declare @exec varchar(128) set @exec = 'bcp [boxNamemysql2k5].adventureWorks.sales.customer format nul -T -n -f c:customer.fmt' --print @exec exec master..xp_cmdshell @exec
gives me:
SQLState = 08001, NativeError = 17 Error = [Microsoft][ODBC SQL Server Driver][Shared Memory]SQL Server does not exist or access denied. SQLState = 01000, NativeError = 2 Warning = [Microsoft][ODBC SQL Server Driver][Shared Memory]ConnectionOpen (Connect()). NULL
(5 row(s) affected)
It's my local PC, that I am local admin on. I did the same thing (different DB of course) on a local 2000 instance and got the same result. It's been a few years since I used BCP, and this isn't ringing a bell. Can someone please assist?
Dear AllA quick question:I run a set of scheduled jobs. The jobs run Stored Procedures.However, if the sproc fails, the job quits and moves on to the nextone. However, the sproc should carry on. E.g, IF find bad records,EXPORT to file, GO TO NEXT RECORD (BUT DON'T QUIT THE SPROC). The jobscheduler does not allow this, therefore, the sproc does not get achance to finish.Is there a way to ensure a sproc can finish before moving on to thenext step?ThanksSimon
Hi All,We have SQL Server 2000 (sp3), running on Win2k Server. Yesterday, midmorning, during normal processing (selecting data .. loading data ..etc) the sql server service suddenly shut down and would not startagain. We received several messages but the 2 most consistent messageswere that 1) the ums.dll could not be loaded and 2) the services failedto start in a timely fashion.IN the event log, the only thing of interest was this:Application popup: sqlservr.exe - Entry Point Not Found : The procedureentry point?FindNextAvailable@UmsSchedulerQueue@@QAEPAVUmsSch eduler@@W4UmsSchedulerAlgorithms@@@Z could not be located in the dynamic link library UMS.DLL.I am at a complete loss. I did create a new instance of sql Server andreattached all of my databases to the new instance - but, of course, nowthe question being posed to me is "what happened?" I have no idea andam wondering if anyone has experienced this before or has any insightthey might be able to share.Any information would be greatly appreciated! Thanks!Bethany HollidayIU, KSOBIndiana Business Research Center*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
This error continues to occur even after a couple of uninstalls and re-installs, only to result in the same error. I can send the logs if you like, but they are large, so this is the short popup I am getting: ( I can't paste the message, but here is the text:
The installer has encountered an unexpected error: The error code is 2331. Error loading library Cprogram filesmicrosoft SQL Server ... sqlca.dll or finding entry point. The specified module could not be found.
Here is a better message out of the event log:
Product: Microsoft SQL Server 2005 Notification Services -- Error 2331. The installer has encountered an unexpected error. The error code is 2331. Error loading library C:Program FilesMicrosoft SQL Server90Setup BootstrapBin{37E9AD9F-3217-4229-B5A5-7A0C82364C6C}sqlca.dll or finding entry point The specified module could not be found.
Any help would be appreciated. Also, XP Pro SP2. Fresh install, no betas, clean box, not upgrade. Thanks in advance for ANY help! Rick
i am using the ftp task to ftp files from remote location to my local system but the task failed giving error "password was not allowed" (i am trying to retrieve the information for the task from configuration table).pls suggest
I have designed an SSIS that needs to download a set of files via ftp. The ftp is working fine under Business Studio. When I move it to The server and try runing the package I'm getting the following errors:
Error: Unable to connect to FTP server using "FTP Server" Error: An error occurred in the requested FTP operation. Detailed error description: The password was not allowed.
This is not my first FTP in SSIS, so I also have the following item set:
Protectionlevel = EncryptProtectedWithPassword I have several other FTP packages that go to the exact same server, with the exact same user ID and password that are working.
I am new to asp.net 2.0, although I have some experience with asp.net 1.1. In my new machine I have VS 2005, SQL Server 2000 and Sql Server 2005 installed. I wanted to connect to a database in SqlServer 2000 from a simple asp.net 2.0 project. I used the following connection string: string strConn = "Data Source=xyz/abc;Initial Catalog=dbname;UID=abc;PWD=efg;"; xyz/abc is the name displyed in the enterprise manager, under SQLServer Group. When I run the app, I am getting the following error: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) The error indicates that it is trying to connect to SQL Server 2005, although my xyz/abc is a SqlServer 2000 instance. Not sure how to force the connection to the SqlServer 2000 database. Thanks
Hello Everyone and thanks for your help in advance. I have set up a new installation of SQL Server 2005 and VS 2005. I am trying to get some web applications up and working, but am experiencing problems with the database connection. I am tring to use the the sa account to connect, but am receiving the error "Login for user 'sa' failed. Not associated with at trusted account...". I am familiar with this error and have made sure that the SQL Server is using SQL Server and Windows Authentication Mode. The connection string I am passing to it is: server=(local);uid=sa;pwd=password;database=Northwind which I believe is correct. So I'm confused as to what the problem is. Any help on this topic would be greatly appreciated. Thanks.
