When I exit out of Query Analyzer - it hangs and gives the following error message in Event logger
Hanging application isqlw.exe, version 2000.80.760.0, hang module hungapp, version 0.0.0.0, hang address 0x00000000.
any keyword for exit SP? like the exit sub.. which stop the Sp from next statement if one condition occured? like : if NOT exists (select blabla) exit SP execution else (blablaba)
I have a package that goes out and picks up a file off of a ftp server using the ftp task. How do I force the package to stop running if the file is not there?
I have a job that has several steps. One of the steps is of type T-SQL. I have an IF...ELSE block in it. If the if statement is true...perform an action. Else exit from the job reporting failure.
I would like to know what sql stmts should i use to exit from the job (in the ELSE block) I tried to use EXIT in the else stmt but it is not exiting from the job step.
As part of our application deployment we have wrapped and automated the SQL Server Express install by launching the setup.exe with our parameters and waiting around for the process to exit.
I had been checking for a Exit Code != 0 to detect errors returned by setup.exe but this does not appear to be foolproof. Several customers' deployments have returned non-zero exit codes, but SQL Express seems to be successfully installed.
I have not found a reference of possible codes returned and their meaning that I could use to fine tune our checking. Does one exist? Or am I going about this the wrong way and should just check for the existence of our instance after setup is complete?
I have a package that runs. Inside the package I want to see if a specific table exists. If it does, I go to the next step inside the package. If it does not, I want to exit that package without errors or even warnings.
Folks, I have a SSIS package that works 3 out of 4 times but it does fail occasionally with the following error.
The return value was unknown. The process exit code was 128. The step failed. I have logging enabled ..but mysteriously the log has no information on the failure..
I am running a Sql Server 2005 job and this job is having 25 steps. Each step is calling the .dtsx packae from D: drive location. While running the job i found this error
"The return value was unknown. The process exit code was 128. The step failed."
This error occurs not for any perticular step. It occurs randomally at any step.
I am running this job on 1. Windows 2003 server with SP2 2. Sql Server 2005 (Developer Edition) with SP2
Can any one please help me out resolving this issue.
I have a SSIS package which contains For Loop Container. when a task in the for loop container fails iam setting loop value to 0, even though iam not able to exit the loop. can some help me
Note: when ever the a task in the Loop fails the loop should stop and package should stop.
I have a foreach loop that is processing files in a directory. One of the tasks is the execute sql task that calls a stored proc. If this stored proc returns a certain value then I need to exit the loop and not process any more files. But I have been unable to figure out how to make this happen.
Hi, I have a dts job that imports an IIS log(a text, space delimited file) into a table. I do only one, very simple activeX transformation, and other than that, i copy the columns right in. I am loading hundreds of these logs. DTS will load most of them just fine via a batch script, but it sometimes just stops and hangs. I get no errors, but my Server's cpu is at 99%. There are no locks anywhere in the database. Any clues as to why this happens? Since i don't ever get errors, i'm really getting nervous on this one.
My DTS job scheduled to run every half an hour is hanging for long.If I stop and restart it will succeed.It happened few times in the past where it ran for 3 days when nobody noticed,and still was executing!Any idea what could be the reason? Thanks1
Using nested cursors, I want to exit the outer cursor, all inner cursors have been closed.
??Where do I add the... ---------- if @c1 > 1000 break else continue ----------
Do I add it at the beginning of my cursor???? --------- begin ---------- open cur fetch next... from into.... while @@fetch_status = 0 begin if @c1 > 1000 break else continue
open cur
fetch next.... from into....
do some business nested inner cursors..... set @c1 = @c1 + 1 -- increment the counter... fetch next... from into.... end close cur deallocate cur --------- end ---------- Will the 'break' take be to my end?
TIA
JeffP... cross posted in ms.pub.sqlserver.programming
How do I configure the database so that it will send an alert to all users who are logged in and using SQL*Server, when I need them all to get out of the database ??? Or, what do I need to look up in the documentation ??? I have looked under SQL*Mail, but that doesn't look like it will work for what I am trying to do. Any help you can give me will be greatly appreciated. Thanks, Nancy
I come from an Access/VB background where in an error trapping routine or testing for an error your statement "exit sub" ended the process. WHen using a stored procedure and you come across an error what is the best method to exit/end the stored proc?
I have install same copy for database server at two windows 2000 server box with SP4.
I have been connected both server on LAN and replicate our required data from one to another. It's working fine.
In actual implementation both server would be connected via ISDN Dialup
Total distance between two server is maximum 40 KM.
I apply same method like lan on ISDN Dial up.
1. Given all permission equvallent to administrator to new user 2. Login by new user 3. Install database server at both end. 4. Dial by one place to another. 5. Ping each other by ip address. 6. By dialup place , I can ping new static IP address given by dial. 7. Dial in place I can ping both IP address newok card as well as new dialip IP 8. Search IP address (RAS Base)., Ping also to remote IP.
I didn’t ping physical network IP address. I can’t brows simply, I can’t ping domain name but I am able to ping remote IP.
I got error at the time of registration - 'Specify Sql server not found, Connection Open Connected()'
10. I try to user client network utility again get error as under-
Add 2nd server by client network utility at the another
Try to connect at got error- Unable to connect to server test Server msg 17 level 16 srare 1 ODBC Sql server driver [TCP/IP Socket] sql server doesn't exit
I didn't understand why I getting error in registraion of one server to another, while both can be registered to each other in LAN environment.
Let me help , I am trying to that for last 4day and night but not yet got any conclussion
I am developing a simple DB-Library program in C calling SQL Server 2000 onwindows 2003 and NT 4. I have some T-SQL code that checks for the existenceof a table and want to abort the program if the table doesn't exist. I issuea raiserror if the table doesn't exist and then call RETURN.I construct the string using sprintf and pass it dbfcnd and dbsqlexec. Sincethe commands work, there is no error to halt the execution of the program.Is there an easy, clean way to force dbsqlexec to fail? Do I need a storedprocedure to return an error code and then deal with that?Thanks for any advice,-Gary
Can someone please explain what exit code 259 means as it appears in the debug output below?
When running a C# Stored Procedure within the VS 2005 IDE I receive the following Debug Output:
Auto-attach to process '[1152] [SQL] enterprise' on machine 'enterprise' succeeded.
Debugging script from project script file.
The thread 'enterprisesqlexpress [56]' (0x150) has exited with code 0 (0x0).
The thread 'enterprisesqlexpress [56]' (0x1314) has exited with code 0 (0x0).
The thread 'enterprisesqlexpress [56]' (0x1314) has exited with code 0 (0x0).
'sqlservr.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_32mscorlib2.0.0.0__b77a5c561934e089mscorlib.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'sqlservr.exe' (Managed): Loaded 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnSqlAccess.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'sqlservr.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_32System.Data2.0.0.0__b77a5c561934e089System.Data.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'sqlservr.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_MSILSystem2.0.0.0__b77a5c561934e089System.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'sqlservr.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_32System.Transactions2.0.0.0__b77a5c561934e089System.Transactions.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'sqlservr.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_MSILSystem.Security2.0.0.0__b03f5f7f11d50a3aSystem.Security.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
Auto-attach to process '[1152] sqlservr.exe' on machine 'enterprise' succeeded.
'sqlservr.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_MSILSystem.Xml2.0.0.0__b77a5c561934e089System.Xml.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'sqlservr.exe' (Managed): Loaded 'SQL2005_Test', No symbols loaded.
'ENTERPRISE;.Net SqlClient Data Provider;4400' (Managed): Loaded 'C:WINDOWSassemblyGAC_MSILSystem.Configuration2.0.0.0__b03f5f7f11d50a3aSystem.Configuration.dll', No symbols loaded.
The thread 'enterprisesqlexpress [56]' (0x1314) has exited with code 0 (0x0).
The program '[1152] [SQL] enterprise: enterprisesqlexpress' has exited with code 0 (0x0).
The program '[1152] sqlservr.exe: Managed' has exited with code 259 (0x103).
I would also appreciate hearing back from users as to why I only have two choices in my VS 2005 IDE Output window (Build and Debug). From what I've read, 'Database' should be another choice for 'Show output from:'.
My environment consists of the following:
Database:
Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Feb 9 2007 22:47:07 Copyright (c) 1988-2005 Microsoft Corporation Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
I have verified the SQL Server connection has 'Allow SQL/CLR Debugging' enabled.
The Visual Studio 2005 IDE is:
8.0.50727.762 (SP.050727-7600)
Running Microsoft .Net Framework version 2.0.50727
I have changed a SSIS package last week. Now, I met the problem that the package sometimes failed both in SQL agent and the BIDs.
SQL agent just give the detail: Process Exit Code -1073741819. The step failed.
In BIDs,when I Check the log,there is even no error. But the last Infomation in the output windows is the package canceled. It just like somebody stop running package manually.
The more strange thing is the package sometimes succeed with running the same data.
I have a problem with a process hanging my SQL server machine and the only thing that can fix it is to reboot the machine. The environment is SQL Server 7, NT sp5, dual processor 500MHZ, 1 gig Ram. The applications are run through MTS written in VB all executing stored procedures. The symptoms are that the process hangs with an open transaction and it can be seen through DBCC OPENTRAN. It can also be seen in MTS on the Transaction List screen and shows as Aborting. It seems to get stuck in that state. The Kill command does not work on the process either. I have tried one fixs that I thought may be causing the error by setting the Max Degree of Paralelism in sp_configure to 1 but that does not fix the problem.
Has anyone seen this and/or have any ideas on how to fix/repair the problem.
One of my clients runs a report using Access retrieving data from SQL*server. Recently I often encounter a problem which makes the server hang. The error messages are something like this, can somebody help?
SqlDumpExceptionHandler: Process 42 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process. Error: 0, Severity: 19, State: 0 CImageHelper::GetSym Error - The specified module could not be found Stack Dump being sent to H:MSSQL7logSQL00158.dmp
I created a simple DTS which executes a VB standard exe that simply writes a string to an ascii file opened as append. SQL Server, the exe, and the ascii file are all on the same NT box (mine). If I execute the DTS myself the process works with no problems. When I attempt to execute the DTS via a job the job hangs with no apparent indications as to what may be the cause of the hangup. The SQL Server Agent is up and running and set to run under the system account. I have applied SQL Server SP3. The same problem was occuring prior to applying SP3.
Does anybody have any idea? All sugestions are appreciated.
We have just combined 3 sites into one server. Two of the sites are serving fine, however one site has spids that won't disconnect. By the end of the day there are over 600 spids from that one site. At first we thought it was due to the ASP pages had a db connect, but nothing that closed that db connection. But after they modified the pages, we are still having the same problem. Checked the webserver and they are identical to the other webservers. Any ideas???
Can anyone suggest what might be causing SQL Server 6.5 to hang? The following messages were in the error log just before, but Books Online is not much help:
2000/08/21 10:35:20.90 ods Error : 17805, Severity: 18, State: 0 2000/08/21 10:35:20.90 ods Invalid buffer received from client. 2000/08/21 10:35:20.90 spid142 Process 142 entered sequencer without owning dataserver semaphore
there are then many messages like this one: 2000/08/21 10:36:21.06 ods Error : 17824, Severity: 10, State: 0 2000/08/21 10:36:21.06 ods Unable to write to ListenOn connection '.pipesqlquery', loginname 'E04180', hostname 'N90459'. 2000/08/21 10:36:21.06 ods OS Error : 109, The pipe has been ended.
and finally many more messages like this: 2000/08/21 10:51:20.75 ods Unable to connect. The maximum number of '750' configured user connections are already connected. System Administrator can configure to a higher value with sp_configure.
I don't think that simply increasing the number of user connections will help, but if anyone can throw some light on the cause of the first message I would be grateful.
I have a scheduled job on my SQL Server 2000 that runs a DBREINDEX job on all the tables in my database. For some reason the system just hangs for hours now when it reaches one particular table. Can somebody please help me to correct the problem. Thank you all in advance.
I am attempting a very simple bcp out to a text file in SQL 2000 for the first time. I've tried various syntax but the command consistently hangs no matter which i use. Nothing is being directed to the output log............
"bcp rfsspd..bcp_product_view out product.out -T -c -b500 -r>>test.log"
I have no problems with this command in SQL 6.5, could it be initial setup or config of 2000 or something really daft????