SQL Browser Warnings In A Cluster
Nov 23, 2007
We have a 6 node cluster with 4 SQL Server named instances in the cluster. I am noticing a lot of warnings in the event log with the following information:
Event Type: Warning
Event Source: SQLBrowser
Event Category: None
Event ID: 3
Description:
The configuration of the AdminConnectionTCP protocol in the SQL instance
<instance name> is not valid.
The event occurs for all four instances.
Additional Information:
* OS is Windows 2003 R2 Enterprise x64 Edition w/SP2
* SQL Server 2005 Enterprise Edition w/SP1, hot fix level 2221
* All SQL services runs under the same domain user account
I did some internet searches and found several others who have had this problem. However, I didn't see any solutions. There also seems to be a similar problem with SQL Express but that is not what I am using.
Any thoughts are appreciated.
View 7 Replies
ADVERTISEMENT
Apr 22, 2008
i have setup a sql job with 4 steps
1-checkdb
2-indexdefrag
3-sp_updatestats
4-email notification.
if 1,2 success go next step
if 1,2,3 fails go step 4
if 3, 4 success quit with success
if 4 fails quit with failure
i created a script and pasted it in production server and i get this msg:
Warning: Non-existent step referenced by @on_fail_step_id.
Warning: Non-existent step referenced by @on_fail_step_id.
Warning: Non-existent step referenced by @on_fail_step_id.
how can i fix it? I think the error is due to step 4 not executing before calling it from stepe 1,2,3
View 1 Replies
View Related
May 8, 2008
I have so many warnings in the package which i create and to open a package to takes a very long time..
How do i get rid of the warnings
Warning 2 Validation warning. Tablw1: OLE DB Destination 8 [61186]: Truncation may occur due to inserting data from data flow column "MEMNO" with a length of 255 to database column "MEMNO" with a length of 50. Membership 90-98 Access 2000.dtsx 0 0
In the final oledb dectination of the package i dont connect the error output to error table because they don't have errors
How to proceed with it???
View 1 Replies
View Related
Jul 26, 2002
Hi. I'm Sara Cushman, a reporter for SearchDatabase. We're doing a story about the latest round of SQL server security warnings and patches.
How did you handle the situation? Did you drop everything else and deal with it? How did it compare with other SQL Server problems you have had? Were you able to handle it in a way that you feel left you without any vulnerabilities? If you haven't dealt with it, what are you waiting for?
We're looking for DBAs to share their stories. If you have some, reply here or email me at scushman@techtarget.com so that I can get in touch with you.
Thanks!
View 1 Replies
View Related
Jul 23, 2004
Hey y'all...
Anyone know how to capture SQL Warnings so I can write them to an error log? I can't seem to find any info on it in Books Online...
I can capture the errors just fine by using @@ERROR after a select, but what about warnings such as "Warning: Null value is eliminated by an aggregate or other SET operation."
Thanks!
View 4 Replies
View Related
Sep 11, 2014
Is there a way to disable warnings in ssis? I'm using a third part tool to call an ssis and when the ssis give a warning the tool is showing failure.
View 1 Replies
View Related
Jan 25, 2006
Rao Aregaddan writes "Hi All,
Here is my Query.....
While executing the following code,it is showing some warnings.
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
SET ANSI_WARNINGS ON
GO
Drop procedure [DBO].[Usp_Extract_OLAP_Data_1]
GO
Create Procedure [DBO].[Usp_Extract_OLAP_Data_1] as
begin
IF EXISTS (SELECT * FROM DBO.SYSOBJECTS WHERE ID = OBJECT_ID('[DBO].[processed_olap_data_1]') AND OBJECTPROPERTY(ID, N'ISUSERTABLE') = 1)
DROP TABLE [DBO].[processed_olap_data_1]
select * into dbo.processed_olap_data_1 from pubs.dbo.processed_olap_data_1
EXEC ('ALTER TABLE dbo.processed_olap_data_1 ADD generatedid INT IDENTITY')
select * from processed_olap_data_1 order by generatedid
END
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS OFF
GO
SET ANSI_WARNINGS OFF
GO
Out Put is as follows
----------------------
(141 row(s) affected)
(141 row(s) affected)
Warning: The table 'processed_olap_data_1' has been created but its maximum row size (3873071) exceeds the maximum number of bytes per row (8060). INSERT or UPDATE of a row in this table will fail if the resulting row length exceeds 8060 bytes.
(141 row(s) affected)
Please guide me on this issue that why iam getting this warning even i set the ansi null and ansi warnings off.
one more thing is that is there any other way to add an
identity column with out using alter statement.and is there any problem with front end guys if it shows like this warnings..."
View 3 Replies
View Related
Jul 20, 2005
Hi! guys,I have a SQL agent job fails because it gets 10 warnings when it runsa stored procedure. These warnings are trivial and can be ignored. CanI make it ignore these warnings and proceed? I think there is somesetting I can do to change the default behavour of an agent jobregarding warnings but I just don't know how to do it.Any idea?Thanks,Gary
View 12 Replies
View Related
Feb 4, 2008
Hi,
I would like to get a list of all the unused columns, I have tons of files and fields in the package probably in the hundreds and I need to know which fields I am not using to see which fields are important not to miss out, so is there any way I can get them in a text file or any other format?
Thanks
View 5 Replies
View Related
Dec 19, 2007
Hello,
I am creating a 2005 SSIS Package with multiple data flows with source data based on the XML Source and a XSD Schema that we have created. These data flows load data from XML into different tables in our data warehouse for order data so the XSD Schema has several hierarchies. Because each data flow loads data into one table (I broke it out this way to make the package easier for readability and maintance) and the source for each is based on the XSD hierarchies I receive numerous warnings similar to the following; "Warning: 0x80047076....Removing this unused output column can increase Data Flow task performance." that I would like to remove. However, when I un-check the box to remove those output columns (which leaves several hierarchies without output columns) I then receive a error similar to the following; "Error: 0xC00470B9 at ....contains no output columns. An asynchronous output must contain output columns."
So the question is how to remove the numerous remove column warnings? I have thought about creating one XML schema for each dataflow, breaking the data flows into different packages, etc. but I am still not exaclty sure how to remove the warnings which should increase the speed of the package overall. Thank you!
View 6 Replies
View Related
Mar 13, 2015
I was just going through the default trace files and see full of sort warnings, missing join predicates and hash warnings. The server behaved weirdly last night with queries longer than usual time and the server started choking. I didn't find any info from error logs or event viewer.
View 3 Replies
View Related
Feb 7, 2008
Hi,
I am trying to import from Excel file. So In between Excel file source and OLEDB destination I am using One Data Transformations to convert excel unicode characters to Sqlserver varchar.
Iam getting this following errors:
1)
Error: 0xC020901C at Data Flow Task, OLE DB Destination [382]: There was an error with input column "Copy of Zip" (615) on input "OLE DB Destination Input" (395). The column status returned was: "The value could not be converted because of a potential loss of data.".
Copy of zip is the Data Transformation column mapped Sqlserver Varcahr(200) column of Zipcode.
In excel file the Zip codes are like this:
78712-2344
78123
12345
87651-1234
2)
The column "State" needs to be updated in the external metadata column collection.
This is warning. This type of warnings are for all columns in excel file.
3) Intially I declared the Sqlserver table columns like this Varchar(100), then SSIS showing some warning like truncation of column State 255 characters to .. So I changed columns datatype from Varchar(100) to Varchar(500)? Why we need to change like this.
Thanks in advance
View 1 Replies
View Related
Jul 6, 2007
Hi,
I am getting unusable warnings from dataflow task while running. Say for example I am getting column A, B, C from source and I am using only column C in destination. Whenever I run the package, I am getting a warning saying that
"The output column "A" (67) on output "Output0" (5) and component "Data Flow Task" (1) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance."
Can any one help me how to resolve these warnings?
Thanks in advance.
View 11 Replies
View Related
Oct 30, 2006
Hi,
Is there a way of stopping truncation warnings due to the fact the the XL driver assumings BSTR(255) columns. I'm loading data from excel to SQL Server, the SQL Server columns are nvarchar(50) but the Excel source has assumed 255.
I can change the Excel Source using the 'Advanced Editor' and change the meta-data of the 'Output Column', but then there's a mismatch between the External Column and Output Column collection - so a warning is displayed.
The External Column meta-data can be changed, but then it's out of sync with the 'Error Output' meta-data (and the Error Output meta-data is read only).
I'm sure I've missed a step, can anyone enlighten me
Dave
View 6 Replies
View Related
Oct 24, 2005
Hi,
I have a custom component that compiles just fine on one environment. I copied and pasted the code to another environment and now I'm getting compilation warnings:
Warning 1 CA1014 : Microsoft.Design : '*******.Seer.Ssis.Common' should be marked with CLSCompliantAttribute and its value should be true. *******.Seer.Ssis.Common
Warning 2 CA1705 : Microsoft.Naming : Correct the capitalization of type name 'PPDMDataLineageComponent'. C:PROJECTSSeerCode*******.Seer.Ssis.CommonPPDMDataLineageComponent.cs 13 Chevron.Seer.Ssis.Common
Warning 3 CA1062 : Microsoft.Design : Validate parameter 'buffer' passed to externally visible method PPDMDataLineageComponent.ProcessInput(Int32, PipelineBuffer):Void. C:PROJECTSSeerCode*******.Seer.Ssis.CommonPPDMDataLineageComponent.cs 99 Chevron.Seer.Ssis.Common
Any ideas?
Thanks in advance
-Jamie
View 3 Replies
View Related
Dec 6, 2007
When running a stored procedure, how can i retrieve the warnings that are issued within the stored procedure?
the code used is below,
the jdbc is connecting fine, it is running the stored procedure, but when an error is raised in the stored procedure, it is not coming back into s.getwarnings()
warning raised in stored proc with
Code Block
RAISERROR ('Error', 16, 1)with nowait;
there are no results for the stored procedure, I am just wanting to get the warnings
Code Block
Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
Connection con = DriverManager.getConnection("jdbc:sqlserver://localh...........);
CallableStatement s = con.prepareCall("{call procedure_name}");
s.execute();
//running in seprate thread
SQLWarning warn = s.getWarnings();
while (m.running) {
if(warn == null) {
warn = s.getWarnings();
}
safeOut(warn);
if(warn != null)
warn = warn.getNextWarning();
m.wait(100);
}the code is not complete, but should show what is happening
it is continually outputting null for the warning, though the strored proc is definately raising errors, which is proven by running it in a query window in sql server.
it is retreiving warning if the statement is a raiseerror instead of a call to the proc
Code Block
CallableStatement s = con.prepareCall("RAISERROR ('Error', 1, 1)with nowait;");
this thread is quite related, but doesnt offer a working solution
Getting messages sent while JDBC Driver calls stored procedure
any help much appreciated,
thankyou
Simon
View 1 Replies
View Related
Jun 23, 2006
hi!
i am trying to execute through command line the following:
dtexecui /SQL "ArchiveMain" /SERVER "SE413695AASQL2005" /WARNASERROR /MAXCONCURRENT " -1 " /CHECKPOINTING OFF
I am actaully creating an archiving package.
1. All it does is get some data from the Table.
2. creating directory and set usedirectoryifexist = true
shows some warning when i run that directory already exists cos i don't want to create new one i want to use the existing one.
3. actual archiving to get call to another package for archiving - warning while running the package that parent variable is missing
The pacakge seems to run while i execute it thorugh command prompt but i get this message
DTExec: The package execution returned DTSER_SUCCESS (0) but had warnings, with
warnings being treated as errors!
Thanks,
Jas
View 1 Replies
View Related
Jun 22, 2007
I have a manager SSIS package that calls a generic loader SSIS package, via the 'Execute Process Task'. The manger package (amongst other things) creates a config file and and then executes DTExec passing the config specification in the Arguments property, i.e. '
'/FILE "D:AudiencePackagesUKDW_Core_Loader_Persist.dtsx" /CONFIGFILE "D:AudienceDataSCPmystery.dtsconfig" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF"
It works as expected, but, I always get the warning message 'File/Process "DTExec" is not in path.', I know that it is because the exe runs and loads the correct package which then performs the correct actions.
Have I dropped the ball here? I cannot see any reason for the warning as DelayValidation==True, I could set RequireFullFileName==True, but I do not know where SQL is installed on the various nodes.
Any input would be warmly received
Thanks
View 1 Replies
View Related
Aug 3, 2006
Hi,
As I was developing my SSIS package, I created several variables and tasks ( FTP, WMI Reader Task ). I am now cleaning up, deleting unwanted variables and connections in the design window. I save and build the package and when I load the package, I get warnings that these variables are referenced but can't find them and errors that the WMI connection is not found.
When a package calls a sub-package, it stores the absolute path of the child package in its dtsx xml file in a Connection String property. How annoying !!! . When I deploy this to another machine with a different file structure, it becomes a problem. Why can't it store the path relative to the parent package, which would be typically in a sub-directory under the parent ?
These last 2 days have been nothing but frustration and my deadline is slipping. Any help is appreciated.
Thx,
-chiraj.
View 13 Replies
View Related
Oct 10, 2015
During the installation of Adding node to a SQL Server failover cluster(On passive node) getting error like.. The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI server to start.We run the below commands but didn’t get any resolution & got the same above error .
1<sup>st</sup> Method…
1. Open console command (Run->CMD with administrator privileges).
2. net stop winmgmt
3. Rename folder %windir%System32WbemRepository to other one, for backup purposes (for example _Repository).
4. net start winmgmt
2<sup>nd</sup> Method..
1. Disable and stop the WMI service.
a) Command : - sc config winmgmt start= disabled
b. Command : - net stop winmgmt
2. Run the following commands.
a). Command: Winmgmt /salvagerepository %windir%System32wbem
b). Command: Winmgmt /resetrepository %windir%System32wbem
3. Re-enable the WMI service
Command: sc config winmgmt start= auto
Last command to run after above steps
4. Command: mofcomp "%programfiles(x86)%Microsoft SQL Server100Sharedsqlmgmproviderxpsp2up.mof"
File not found Error for above command.
View 3 Replies
View Related
Jun 10, 2015
I am in the process of moving databases from a SQL 2005 Standard version to a 2-node 2014 cluster.All of my 2005 databases back up successfully.They all restore without issue except for one database that has a full text catalog. I get this message
Msg 7610, Level 16, State 1, Line 2
Access is denied to "fileStoragedataMSSQLSERVERFullTextCatalog", or the path is invalid.
Msg 3156, Level 16, State 50, Line 2
File 'sysft_FTCatalog' cannot be restored to 'fileStoragedataMSSQLSERVERFullTextCatalog'. Use WITH MOVE to identify a valid location for the file.
Msg 3119, Level 16, State 1, Line 2
Problems were identified while planning for the RESTORE statement. Previous messages provide details.
Msg 3013, Level 16, State 1, Line 2
RESTORE DATABASE is terminating abnormally.
[code]....
I went as far as giving the folder full access to everyone temporarily and received the same error.
View 1 Replies
View Related
Aug 20, 2007
All:
I've implemented a variation of the Custom Logging provided in this post by Jamie Thomson.
http://blogs.conchango.com/jamiethomson/archive/2005/06/11/SSIS_3A00_-Custom-Logging-Using-Event-Handlers.aspx
Everything seems to work well on my desktop during development, but when I deployed the packages to our DEV environment the packages still execute, but I'm now receiving warning messages in the sysdtslog90 log table...
Precompiled script failed to load. Attempting to recompile. For more information, see the Microsoft Knowledge Base article, KB931846 (http://go.microsoft.com/fwlink/?LinkId=81885).
My log table (SSISLog) looks OK, with only OnPostExecute messages that include the package / task information and rowcounts.
The KB article suggests upgrading to SP2, but I'm well past SP2, using Build 3159 on both machines.
Any suggestions on how to get rid of the warnings?
Thanks!
Leda
View 2 Replies
View Related
Apr 4, 2008
Hola chicos!!!
Estoy empezando a ver sobre la opcion que maneja el RS de envio de emails...podrian apoyarme con un manual o indicandome como o que configurar para que esto fuciones pliz!... o es con el manejo del Sql , crear un procedure y programar una tarea que se ejecute cada cierto tiempo para que se ejecute el proc ????
Gracias!
Karla Ramos
View 1 Replies
View Related
Apr 10, 2014
I ran the Advanced cluster preparation for a new sql instance on an existing cluster.
Slq Server 2012.
After is completed, it was successful, I realized I specified the wrong Instance Root directory.
Is it possible to remove what the preparation installed? Or is it possible to change the root directory?
View 3 Replies
View Related
Jul 6, 2015
Can I build a cluster by adding the cluster service, then the SQL instances, then add the other nodes and their passive SQL instances?I would lean to building the cluster first, the add the SQL instances.
View 4 Replies
View Related
Feb 18, 2014
I´ve been reading that SQL Server 2012 Always On is dependent on having a Windows Failover Cluster setup. Is that correct ?
View 6 Replies
View Related
Nov 6, 2014
I have following script which i am planning to run to drop all non-clustered primary keys on a database and then created as clustered. I am using someone else's script so don't know how to modify this. Some of primary key columns are used in references in other tables.
is there anyway i can drop the existing primary keys and using their original script then create again as clustered including restoring all foreign and reference keys and unique or no unique.
DECLARE @table NVARCHAR(512), @tablename NVARCHAR(512),
@sql NVARCHAR(MAX), @sql2 NVARCHAR(MAX), @sql3 NVARCHAR(MAX),
@column NVARCHAR(MAX);
DECLARE @indexname NVARCHAR(512);
SELECT name As 'Table'
[Code] ....
View 8 Replies
View Related
Oct 8, 2015
can we join a node in a windows cluster which is already in a different cluster?
We have this requirement as we need to setup readable secondary ( always on AG) on the third node.
View 2 Replies
View Related
Jul 15, 2015
We are planning to change all IPs of PRODUCTION Failover Cluster Setup. In my cluster setup ... we have 2 Physical Nodes with windows-2008, Roles are MSDTC and SQL-2008R2.
IP change for:
1. Both Nodes(Physical)
2. MSDTC
3. SQL Server
4. windows Cluster
So Almost... All IPs are going to change.
Im DBA here, I need to take care of SQL cluster and MSDTC. But I haven't performed this activity before.So I'm worrying about Impacts and consequences of this change. steps how should I perform this activity.
View 9 Replies
View Related
May 20, 2003
Hi all,
We have many tables which have cluster index on column with datatype 'Char(200)'.
Does anyone have script to change cluster index to noncluster for all user tables which have clustered index on a column with 'char(200)' datatype.
Thanks,
Deepak
View 2 Replies
View Related
Jul 26, 2015
Wanted to know about difference between cluster and non cluster index with example.
When to use cluster index and non cluster index .
View 3 Replies
View Related
Jun 10, 2015
CREATE TABLE [dbo].[Access](
[AdminID] [int] NOT NULL,
[FnID] [int] NOT NULL,
CONSTRAINT [PK_AccessFn] PRIMARY KEY NONCLUSTERED
[Code] ....
why the cluster and non cluster indexed created on the same key?
View 3 Replies
View Related
Jul 17, 2000
I am trying to upgrade a SQL Server 6.5(Cluster) to SQL Serevr 7.0 (Cluster)..I already have an intsllation of 7.0(On a Cluster),so this means that 6.5 and sql 7 are on seperate cluster's ,if i try to upgrade from 6.5 Cluster to 7.0 Cluster is asks me to uncluster 6.5 and 7.0 is this correct ,assume i cannot break the cluster then what???.. what is the best way i can achieve this functinality.....
thanks in advance
Jack
View 1 Replies
View Related
