SQL/CLR Debugging Hangs On Visual Studio 2003 And SQL 2005
Feb 5, 2008
I am unable to debug code from a SQL Database Project using the CLR. After VS 2005 does the auto-attaching to the SQL server, VS hangs until I tell it to stop debugging. Many others have reported this as a similar problem, however this only seems to affect me when I€™m connecting to specific servers. Specifically it seems to be remote connections. When I attempt to connect to my SQL 2005 Developer Edition €œlocally€? I get right through and can debug.
From my VS output window:
Auto-attach to process '[1688] [SQL] gx620-eric' on machine 'gx620-eric' succeeded.
Debugging script from project script file.
testing
No rows affected.
(0 row(s) returned)
Finished running sp_executesql.
The thread 'gx620-eric [59]' (0x1730) has exited with code 0 (0x0).
The thread 'gx620-eric [59]' (0x1730) has exited with code 0 (0x0).
The thread 'gx620-eric [59]' (0x1730) has exited with code 0 (0x0).
The thread 'gx620-eric [59]' (0x1730) has exited with code 0 (0x0).
The program '[1688] [SQL] gx620-eric: gx620-eric' has exited with code 0 (0x0).
When I attempt to connect to a remote server running Enterprise Edition, it hangs after a successful attach.
Auto-attach to process '[1856] [SQL] virtual2003eric' on machine 'virtual2003eric' succeeded.
Sometimes after countless attempts, I am able to get this to work, but lately I have had no success. As far as the SQL Server side, enabling and disabling the CLR through the Surface Area Configuration seems to be the only place to do anything relative to the CLR inside SQL server.
I have firewalls disabled. All SQL Servers presently have both SQL 2005 SP2 and Visual Studio 2005 SP1 installed.
I€™ve tried restarting servers and services, checking and un-checking €œAllow SQL/CLR Debugging€? and those steps did not work for me.
Does anyone have any insight on this one? Any ideas on how I can further debug this one?
Thanks.
Eric
View 4 Replies
ADVERTISEMENT
Jan 19, 2006
I ask because I'm still looking for the source of interface problems I have in using the SSIS designer.
View 4 Replies
View Related
Feb 29, 2008
Hi ,I am using Visual studio 2005 with sql server 2005. I want to debug my stored procedure, which is situated on the server on the network(accessible through network share). I followed the following URL: http://aspnet.4guysfromrolla.com/articles/051607-1.aspxI have used Direct database debugging : When I right click my stored procedure and click 'step into stored procedure', I get the following error: "Unable to start T-SQL debugging. could not attach
to SQL server process on 'sql_server_name'. The remote procedure call failed and did not
execute" I am using windows authentication to login to sql server Any help?
View 7 Replies
View Related
Aug 2, 2006
Hello,
we have a SQL server 2005 with Visual studio Prof. 2005 in the
employment.
The debuggers function only in Visual studio correctly, as long as no
code on the SQL server must be implemented.
If a BREAK POINT in a Stored Procedure is set, this is not activated,
since this cannot be bound.
Does someone know, what it lies and can like one it eliminate?
Thank you for your assistance in advance.
Yours sincerely
Big_Ben_31
This entry was translated automatically with the translation
service babel.altavista.com from the German into English.
View 1 Replies
View Related
Jun 2, 2006
I am just starting to work with Visual Studio and SQL. I have Visual Studion 2003 with .net Framework 1.1. I want to download the SQL 2005 Express version and it requires the upgrade to .NET Framework 2.0
Will this affect my Visual Studio 2003? And can I use SQL 2005 with Visual Studio 2003?
Any help would be appreciated.
Thanks,
View 1 Replies
View Related
Jul 16, 2007
Hi, is it possible to use SQL server express 2005 with visual studio 2003?
i've some problems...
Thanks
View 4 Replies
View Related
Jul 21, 2006
hello all,
i have SQL Server 2005 installed on a network computer and want to access it through code in asp.net. I am using visual studio 2003.
I have porvided this connection string to connect to that Sql Server 2005 Express instance but failed:
data source=mynetworkstystemSQLEXPRESS;database=MobMatiLogs;User Id=sa;password=mobmasti786
But I get the error:
SQL Server does not exist or access denied.
Anyone please help me!
Thanks in advance
View 4 Replies
View Related
Aug 3, 2007
I have been experiencing troubles since I was decided to install SQL Server Expr 2005 in my PC, first I needed to remove the .NET framework 1.1 in my computer because it is suggested before installing sql server expr 2k5 that cause my vs.net 2003 to stop loading because sql express runs in .NET framework 2.0 and vs.net 2003 is in .Net Framework 1.1 then what I did is to install .Net Framework 1.1 in my PC together with .Net Framework 2.0 and my vs.net started runnning again.
My problem now is when I try to connect to a database using Data Link Properties in the Server Explorer it says "[DBNETLIB][ConnectionOpen](Connect()).]Sql server does not exist or access denied." how could this happen if I can see the sql server in the Server Explorer in my VS.net environment?
Please somebody help me I am just learning to this language and I think I cannot proceed to the next few chapters remaining because of this.
Thank you very much!
View 5 Replies
View Related
Jun 1, 2007
I have one computer running Visual Studio 2003, and another running SQL Server 2005. I am trying (unsuccessfully) to add a connection to a sqlDataAdapter from an application in the Visual Studio 2003 computer to the db on the SQL 2005 machine.
If I go to the machine running sql 2005, where I am running visual Studio 2005, I can create this connection with no problems.
Is there a way fromvisual Studio 2003 to create a sqlDataAdapter with a connection to SQL 2005?
View 3 Replies
View Related
Jul 20, 2006
I have Visual Studio 2003 and had used it successfully with MSDE. I recently upgraded to SQL 2005 Express and cannot seem to connect to the SQL server. it appears in the list of servers on localhost, but when I try to create a new database it tells me that it "cannot create databases on this server." It will not even open up any existing databases.
I have .NET 2.0 installed. I uninstalled SQL and reinstalled it, but nothing seems to help. I feel I must be missing something, but do not know what.
I no longer have the MSDE installation files, so I hope I can get Studio to talk to SQL Express.
Any help is appreciated.
View 22 Replies
View Related
Oct 30, 2007
Hi
I am following a project to build a small E-Commerce site from a book I have purchased and I have having problems connecting to the SQL Database with the code supplied.
The book is Apress Beginning ASP.NET 1.1 E-Commerce
http://www.amazon.co.uk/Beginning-ASP-Net-1-1-E-Commerce-Professional/dp/1590592549/ref=sr_11_1/202-7684451-7995058?ie=UTF8&qid=1193780707&sr=11-1
The code added to the Web.Config file is :
<configuration>
<appSettings>
<add key="ConnectionString" value="Server=(local)NetSDK;Integrated Security=True;Initial Catalog=JokePoint" />
</appSettings>
The connection details are in a class file called Catalog.vb and is as follows
Imports System.Data.SqlClientPublic Class Catalog
Public Shared Function GetDepartments() As SqlDataReader
'Create the connection objectDim connection As New SqlConnection(connectionString)
'Create and initialize the command objectDim command As New SqlCommand("GetDepartments", connection)
command.CommandType = CommandType.StoredProcedure
'Open the connection
connection.Open()
'Return a SqlDataReader to the calling functionReturn command.ExecuteReader(CommandBehavior.CloseConnection)
End Function
Private Shared ReadOnly Property connectionString() As String
GetReturn ConfigurationSettings.AppSettings("ConnectionString")
End GetEnd Property
End Class
The error is.....
Cannot open database "JokePoint" requested by the login. The login failed. Login failed for user 'MachineNameASPNET'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Cannot open database "JokePoint" requested by the login. The login failed. Login failed for user 'MachineNameASPNET'.Source Error:
Line 15: 'Open the connection
Line 16:
Line 17: connection.Open()
Line 18:
Line 19: 'Return a SqlDataReader to the calling function
Source File: C:MyCommerceSiteJokePointBusinessObjectsCatalog.vb Line: 17 Stack Trace:
[SqlException: Cannot open database "JokePoint" requested by the login. The login failed.
Login failed for user 'MachineNameASPNET'.]
System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction)
System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction)
System.Data.SqlClient.SqlConnection.Open()
JokePoint.Catalog.GetDepartments() in C:MyCommerceSiteJokePointBusinessObjectsCatalog.vb:17
JokePoint.DepartmentsList.Page_Load(Object sender, EventArgs e) in C:MyCommerceSiteJokePointUserControlsDepartmentsList.ascx.vb:44
System.Web.UI.Control.OnLoad(EventArgs e)
System.Web.UI.Control.LoadRecursive()
System.Web.UI.Control.LoadRecursive()
System.Web.UI.Control.LoadRecursive()
System.Web.UI.Page.ProcessRequestMain()
The connection tests ok in Visual Studio 2003. All permissions are set using SQL Management Studio Express 2005.
The book is using SQL 2000, I have been trying different connection syntax's in the Web.Config file all day and now I have a big headache. I know its something simple, can anyone please advise ?
Thanks in advance.
Mark
View 3 Replies
View Related
Mar 3, 2006
We are new to SQL Server 2005 Express Edition. We are going to develope a solution for one of our client and we have to decide on which database to use for the solution. Client wanted to have a low cost solution. Thus we were not in a position to push them for SQL Sever 2000.
In the process, we also thought of having MySQL as one of the option. Another option we have is to use SQL Server 2005 Express Edition.
We wanted to know if SQL Server 2005 Express Edition can be used with Visual Studion 2003 (Ver 1.1) or it can only be used with Visual Studio 2005 (Ver 2.0)?
Hope to get feedback soon.
Regards
Sanjeev
View 1 Replies
View Related
Jan 11, 2006
I was wondering if it is possible to connect the SQL Server 2005 Express Version to Visual Studio 2003.If its possible , how can it be done?Cos i seem to have an error if i do so.
View 4 Replies
View Related
Oct 15, 2007
Hello,
I've seen this question floating around, but I have not been able to find a definitive answer.
Can this be done, and if so, what do I need to install into Visual Studio 2003?
Thank you.
-Gumbatman
View 5 Replies
View Related
Oct 19, 2006
I am using Visual Studio 2005 Professional Edition
I open it up, Connect to a SQL Server, expand through to the stored procedure I want, Right Click and ...... There are no options for stepping into the stored proc.
Could I have missed something on the install. Please Help!!!
View 1 Replies
View Related
Jan 23, 2008
Hello all. I've been trying to find answers for my problem in this forum (and others) but with no sucess so far.
My problem is that Visual Studio crashes when I start debugging a specific package. This package will call most of the other packages in the project (around 200) and it seems that Visual Studio is unable to handle that number of packages, or if it is, then something else is flawed somewhere.
All the packages run as they should when I debug them by themselves. Running without debug works fine but I need it to run in debug mode.
I read some topics where the problem was about validation when opening SSIS but that's not my case. Everything runs smoothly and even the first minutes of debugging run ok, but after that the process keeps running, and I know that because some process tasks still popup, but visual studio doesn't respond at all.
Any input is apreciated.
Regards,
Pedro
View 11 Replies
View Related
May 22, 2008
I've followed the steps in http://www.sqlteam.com/article/debugging-stored-procedures-in-visual-studio-2005 & in the MSDN for configuring and setting up debugging SQL 2005 stored procedures in VS 2008 (seems to be the same as in VS 2005). Everything works fine until I Step Into the Stored Procedure. Everything says that a yellow arrow will appear on the left and I can start going line by line. I never get the yellow arrow.
If I set a breakpoint, it is automatically disabled. The pop-up warning says, "The breakpoint will not currently be hit. Unable to bind SQL breakpoint at this time. Object containing the breakpoint not loaded." I can't find anything about this message or problem on Microsoft's site or on the web. Any assistance is appreciated.
P.S.
I'm running VS 2008 Professional Edition Version 9.0.2.1022.8 RTM
View 7 Replies
View Related
Mar 17, 2004
Hi, I used to be able to debug stored procedures via Visual Studio.net 2003. However, this has stopped working. It does not produce an error just simply doesn't work anymore i.e. the breakpoints are by-passed.
I have the correct settings in the Debug configuration section. If any-one knows how to rectify this your help would be appreciated.
I have thought about re-installing the remote debugging functionality on the server. However, our Visual Studio.net discs are with a developer who is away at present.
Thanks in advance
Lee
View 2 Replies
View Related
Aug 24, 2006
We have a project already developed iusing VS 2003 Enterprise architect edition using sql server 2000(have lots of table and stored procs etc.)
Now planning to switch to Sql server 2005 are there any issues associated with the switch.
I mean front end programming wise asp.net and vb.net front end codes do they work straight away or need to make any changes to all the front end codes, we are using datasets, data readers calling stored procs and also using lot of hash tables and XML object to make bulk loads to sql server via sqlxml3.0 sp3.
Please help thank you very much for the information.
View 1 Replies
View Related
Oct 31, 2007
Hi,
We have a problem with visual studio. It hangs when i use the "execute package" option. New packages are running correctly but the packages which i've already built are not executing anymore...Any ideas to get things on track again?
Gr,
Hennie
View 2 Replies
View Related
Jan 19, 2007
When I push my SSIS packages up to my production server (which has a different data source than my developement environment) and I try to open the package on the production server, it takes forever for to validate all the steps of the SSIS package because it's trying to validate against a datasource that isnt there, so it just waits for each element it's validating to time out. This is exceptionally annoying.
Is there a way to turn off this validation 'feature'?
View 14 Replies
View Related
Jan 24, 2007
Hi
I have around 160 packages in SSIS. When i run these packages, after some times the errror comes that the system is low on virtual memory and then visual studio freezes. I have a machine with 1G memory. All these packages are not running parallely but they have some dependencies defined on them.
Please let me know if theres some way to configure it correctly,
Thanks,
Vipul
View 2 Replies
View Related
Jun 19, 2006
Basically I've been using Visual Studio 2005 for a few weeks now moving a Pocket PC project from 2003 to 2005. When I hit the Start Debugging Button every time until today the project would rebuild and deploy to my pocket PC allowing me to debug etc but now I get
The remote connection to the device has been lost.
Please verify the device conection and restart debugging.
I used to get this problem in VS2003 sometimes and just like the numerous posts on different sites that I've looked at the problem eventually goes away and I'm none the wiser. One guy said that he found that if he went to bed the problem was resolved when he came back!
My PDA running Windows 2003 2nd Edition is directly connected to my PC via a USB port. I've rebooted my PC and done a soft reset on the PDA but it didn't help. I'm using ActiveSync 4.1.
Does anyone know how to resolve this problem?
View 54 Replies
View Related
Mar 7, 2007
When creating a report using reporting Services with a cube as a datasource, visual studio 2005 hangs. I have applied SP1 to visual studio.net 2005 .
This is the query generated by query designer in reporting services. When I try to drag and drop another dimension to slice it by , visual studio hangs.
The fact table has just 10,000 records. Are the number of dimensions used to slice the cube too many? How do I optimize this query?
SELECT NON EMPTY { [Measures].[Avg MT Rate - Speech], [Measures].[Change in Avg MT Rate], [Measures].[Edited Lines Per 1000], [Measures].[Speech Utilization], [Measures].[Time Saved %], [Measures].[Speech Edited for Rev 1], [Measures].[Change in Account Productivity], [Measures].[Hours Saved], [Measures].[Lines Per 1000], [Measures].[Average MT Rate - Total Production], [Measures].[Typed Lines], [Measures].[Productivity Time in hours - Edited Docs],[Measures].[Productivity Time in Hours - Typed Docs],[Measures].[Productivity Time in Hours]} ON COLUMNS, NON EMPTY { ([Dim Customer].[Customer Name].[Customer Name].ALLMEMBERS * [Dim Customer].[Dictator Site Name].[Dictator Site Name].ALLMEMBERS * [Dim Date].[The Month].[The Month].ALLMEMBERS * [Dim Date].[The Year].[The Year].ALLMEMBERS * [Dim MT].[Creator Last Name].[Creator Last Name].ALLMEMBERS * [Dim MT].[Creator First Name].[Creator First Name].ALLMEMBERS ) } DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM ( SELECT ( STRTOMEMBER(@FromDimDateTheYear, CONSTRAINED) : STRTOMEMBER(@ToDimDateTheYear, CONSTRAINED) ) ON COLUMNS FROM ( SELECT ( STRTOMEMBER(@FromDimDateTheMonth, CONSTRAINED) : STRTOMEMBER(@ToDimDateTheMonth, CONSTRAINED) ) ON COLUMNS FROM [ETL DW])) CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING, FONT_NAME, FONT_SIZE, FONT_FLAGS
View 1 Replies
View Related
Jun 16, 2015
I've built an SSIS package in SSDT 2014. The package was running successfully
When I close and open the package it hangs on validation of single task out of all.
OLEDB DESTINATION Task
I have tried several times to close the SSDT and open but facing same issue.
These seems like bugs in SSIS/SSDT. What would cause the relocation of some script code to hang the validation process like this?
View 2 Replies
View Related
Nov 16, 2005
License requiredMaybe you don't have this but have one of the products thatqualifies for the upgrade such as ...Visual Studio .NET 2003 ProfessionalVisual Studio .NET 2003 Professional Special EditionVisual Studio .NET 2003 Enterprise ArchitectVisual Studio .NET 2003 Enterprise DeveloperVisual Studio .NET 2002 Professional EditionVisual Studio .NET 2002 Enterprise DeveloperVisual Studio .NET 2002 Enterprise ArchitectVisual Studio 97 Enterprise EditionVisual Studio 6.0 Professional EditionVisual Studio 6.0 Enterprise EditionVisual Basic 5.0 (or later) Professional EditionVisual Basic 5.0 (or later) Enterprise EditionVisual C++ 5.0 (or later) Professional EditionVisual C++ 5.0 (or later) Enterprise EditionVisual InterDev 1.0 (or later)Visual J++ Professional Edition 1.1 (or later)Visual FoxPro 5.0 (or later) Professional EditionVisual SourceSafe 5.0 (or later)Visio 2000 Enterprise Editionthat you are willing to part with for some cash.Dan Thomas
View 1 Replies
View Related
Apr 14, 2006
I'm attempting to connect to my SQL Server Express instance through Visual Studio 2003. When I go to Data Connections, I choose the Microsoft OLE DB Provider for SQL Server, then fill in all the parameters for my server (server name, username, password, database). When I click "Test Connection" it goes through successfully. When I click "Ok" to create the Data Connection, it fails saying that the username and password should be checked. I changed the username and password to the "sa" account I created when I installed SQL Server Express, and got the same successful connection test, but failure when it tries to create the connection. Any suggestions? Thanks!
View 3 Replies
View Related
Jan 2, 2006
I've recently noticed the availability of SQL Server Mobile, and would
like to take advantage of some of the new features, however, I'm
currently using Visual Studio 2003. The requirements state that Visual
Studio 2005 is required, but I was wondering if anyone has had any
success getting it to work with VS 2003?
I hope that I can do this with VS 2003, but if VS 2005 will be
required, I'd like to clear up a few issues before asking my workplace
to fork out more money for the upgrade:
What have your experiences been like in getting clients to
upgrade from SQL Server CE to SQL Server Mobile? I've seen some
postings regarding problems with specific devices which seem a bit
worrying, but I was wondering how easy it was in general.
Does SQL Server Mobile really do a good job of reclaiming wasted
space? Using SqlCeEngine's Compact method has caused problems due to
the required storage space to perform the operation.
The documentation states that using SQL Server 2000 with SP3A is
supported, but I was wondering if anyone has any experience with this?
Thanks in advance,
Adrien.
View 6 Replies
View Related
Apr 2, 2007
Hello,
I am having a problem with SQL Server (Express) hanging during simple debugging of CLR code. I created a test project with a user defined function, and call this from the test script. The output log shows that the sqlservr.exe was auto-attached successfully, and then the everything hangs. I have to terminate debugging in order to regain control, and this takes perhaps a minute or two.
Any ideas?
View 11 Replies
View Related
Aug 24, 2006
Hello,
I had a simple question (I'm hoping). Can a 1.1 .NET Framework ASP.NET website use SQL Server 2005 Express edition for it's database? Thanks.
Brandon
View 3 Replies
View Related
Feb 3, 2007
I need help setting up my laptop so that I can develop using Visual Studio 2003 and SQL Server 2000. I currently have both installed on my laptop but can not get them to play nicely together. Here is my connection code:
//string strConnection = "Provider=Microsoft.Jet.OleDb.4.0;";
//strConnection += @"Data Source=C:BegASPNET11ch12Northwind.mdb";
//Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=False;User ID=guest;Initial Catalog=Volkswagen;Data Source=DEREKLAPTOP;Use Procedure for Prepare=1;Auto Translate=True;Packet Size=4096;Workstation ID=DEREKLAPTOP;Use Encryption for Data=False;Tag with column collation when possible=False
string strConnection = "Provider=SQLOLEDB.1";
strConnection += @"Data Source=C:Program FilesMicrosoft SQL ServerMSSQLDataorthwnd.mdf";
////strConnection += @"Data Source=DEREKLAPTOP";
data_src.Text = strConnection;
string strSQL = "SELECT FirstName, LastName FROM Employees";
DataSet objDataSet = new DataSet();
OleDbConnection objConnection = new OleDbConnection(strConnection);
OleDbDataAdapter objAdapter = new OleDbDataAdapter(strSQL, objConnection);
objAdapter.Fill(objDataSet, "Employees");
DataView objDataView = new DataView(objDataSet.Tables["Employees"]);
dgNameList.DataSource=objDataView;
dgNameList.DataBind();
Here is the error message I get in IE:
No error information available: REGDB_E_CLASSNOTREG(0x80040154).
Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code.
Exception Details:
System.Data.OleDb.OleDbException: No error information available:
REGDB_E_CLASSNOTREG(0x80040154).
Source Error:
Line 18: OleDbDataAdapter objAdapter = new OleDbDataAdapter(strSQL, objConnection);
Line 19:
Line 20: objAdapter.Fill(objDataSet, "Employees");
Line 21: DataView objDataView = new DataView(objDataSet.Tables["Employees"]);
Line 22: dgNameList.DataSource=objDataView;
Source
File: C:BegASPNET11ch12datagrid.aspx Line: 20
Stack
Trace:
[OleDbException (0x80040154): No error information available: REGDB_E_CLASSNOTREG(0x80040154).]
[InvalidOperationException: The 'SQLOLEDB.1Data Source=C:Program FilesMicrosoft SQL ServerMSSQLDataorthwnd.mdf' provider is not registered on the local machine.]
System.Data.OleDb.OleDbConnection.CreateProviderError(Int32 hr) +81
System.Data.OleDb.OleDbConnection.CreateProvider(OleDbConnectionString constr) +107
System.Data.OleDb.OleDbConnection.Open() +203
System.Data.Common.DbDataAdapter.QuietOpen(IDbConnection connection, ConnectionState& originalState) +44
System.Data.Common.DbDataAdapter.FillFromCommand(Object data, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +304
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +77
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +36
ASP.datagrid_aspx.Page_Load() in C:BegASPNET11ch12datagrid.aspx:20
System.Web.Util.ArglessEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +10
System.Web.UI.Control.OnLoad(EventArgs e) +67
System.Web.UI.Control.LoadRecursive() +35
System.Web.UI.Page.ProcessRequestMain() +750
Version Information: Microsoft .NET Framework Version:1.1.4322.2032;
ASP.NET Version:1.1.4322.2032
I know that my problem is in the @DataSource part of the connection string. It works if I use the first two lines (the database file is in the same folder as the code). But not when I use it as above. I think I'm pointing to the wrong place, but I can't figure out the right place to point to. I have SQLServer running on my laptop (I think), so can anyone help me out or maybe give me some example connection strings that you have used? Thanks.
Derek
View 3 Replies
View Related
Nov 20, 2005
I'm fairly new to using SQL Server and I'm having problems just trying to edit Functions in the SQL server database with Visual Studio .Net 2003.
View 1 Replies
View Related
Sep 1, 2006
Hello to everyone, I have this problem If I use this code when I try to update a record in my sql database It does not do anything. This is the code. Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click Dim myconn As New SqlConnection("Data Source=.;Initial Catalog=SistemaIntegral; user id=sa") Dim mycmd As New SqlCommand("presup", myconn) mycmd.CommandType = CommandType.StoredProceduremycmd.parameters.Add(New SqlParameters("@txtClave", SqlDbtype.int,4)).Value=txtClave.textmycmd.parameters.Add(New SqlParameters("@txtForig", SqlDbtype.varchar,50)).Value=txtFOrig.textmycmd.parameters.Add(New SqlParameters("@txtFmod", SqlDbtype.varchar,50)).Value=txtFmod.textmycmd.parameters.Add(New SqlParameters("@txtFeje", SqlDbtype.varchar,50)).Value=txtFeje.textmycmd.parameters.Add(New SqlParameters("@txtPorig", SqlDbtype.varchar,50)).Value=txtPorig.textmycmd.parameters.Add(New SqlParameters("@txPmod", SqlDbtype.varchar,50)).Value=txtPmod.textmycmd.parameters.Add(New SqlParameters("@txtPeje", SqlDbtype.varchar,50)).Value=txtPeje.text mycmd.parameters.Add(New SqlParameters("@txtClave", SqlDbtype.int,4)).Value=txtClave.text myconn.Open() mycmd.ExecuteNonQuery() myconn.Close() mycmd.Dispose() myconn.Dispose() End Sub This is the code for the procedure called "presup" in SQL 2000 Server.CREATE PROCEDURE [presup](@txtClave [int],@txtForig [varchar](50),@txtFmod [varchar](50),@txtFeje [varchar](50),@txtPorig [varchar](50),@txtPmod [varchar](50),@txtPeje [varchar](50),@txtIdPresupuesto [int])as Update [Presupuesto]Set [IdClave]=@txtClave,[orig]=@txtForig,[moda]=@txtFmod,[ejer]=@txtFEje,[origr]=@txtPorig,[modar]=@txtPmod,[ejerr]=@txtPejeWhere ([IdPresupuesto]=@txtIdPresupuesto)GO When I click the Update button of my webform it does not do anything. Please Help me I am new to Visual Studio.Net 2003. (2 weeks ago I started using Visual Studio)
View 1 Replies
View Related
