SQL CLuster (Urgent)
May 12, 2001
Hi,
We are having SQL SERVER 7.0 on NT cluster.We have a problem registring server with enterprise manager. Actually it was fine for some time. But actually today to install servicepack we unclustered.It went with some errrors. Actualy we tried to recluster the servers .Every thing is fine but intially at the end it said that it can't connect to the virtual server host name.Now every thing seems to be fine but when we try to register the server with EM we can't do it now.But by using IP address we can register the server.We are able to connect by using SQL Query analyzer.Can anyone suggest me any thing.i greatly appreciate your help.
regards
MM
--------------------------------------------------------------------------------
View 2 Replies
ADVERTISEMENT
May 1, 2001
I have a Sql Server cluster set up in an active/active configuration. It is running NT4.0 SP6 and SQL Server 7.0. The problem is that node 2 has failed over to node 1 and whatever I try, I cannot get node 2 to failback. I think I have tried just about everything. Any SQL Cluster gurus out there ? Any help would be very much appreciated. Thanks in Advance
View 2 Replies
View Related
Apr 17, 2003
Hello,
Can anyone guide me how to create link server to sybase from MS SQL Server 2000 cluster.
Thanks
Sejal
View 1 Replies
View Related
Sep 7, 2006
Hey. I've 2 nodes in this activeactive cluster. Both of them have 20gb memory. Right now, both are configured to use 12gb each. Is that the right way to configure it? I was thinking we'll have IO issues if we ever failed over to a server. I've to migrate to SQL 2005 and needed some help regarding using accounts.
Should I use the same account for the cluster service and the SQL Server/Agent service? If not what are the permissions I've to give to the cluster service account in SQL? I've a cluster with 2 nodes. What permissions should the SQL account be given on the box? Should it be a local admin or when installing, I give it the account and let SQL worry about giving permissions to the box?
Thank you.
View 2 Replies
View Related
Nov 2, 2007
Hi,
I am having an existing sql 2005 cluster on an active passive cluster. I need to add analysis service to this as a new component. I am having enough space available in the cluster disks. Following are my queries,
1) do i need a new virtual ip and virtual server name for the analysis services ?
2) do i need a seperate cluster resource group for analysis services with an additional disk added ?
Regards
Nimesh
View 1 Replies
View Related
Oct 10, 2015
During the installation of Adding node to a SQL Server failover cluster(On passive node) getting error like.. The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI server to start.We run the below commands but didn’t get any resolution & got the same above error .
1<sup>st</sup> Method…
1. Open console command (Run->CMD with administrator privileges).
2. net stop winmgmt
3. Rename folder %windir%System32WbemRepository to other one, for backup purposes (for example _Repository).
4. net start winmgmt
2<sup>nd</sup> Method..
1. Disable and stop the WMI service.
a) Command : - sc config winmgmt start= disabled
b. Command : - net stop winmgmt
2. Run the following commands.
a). Command: Winmgmt /salvagerepository %windir%System32wbem
b). Command: Winmgmt /resetrepository %windir%System32wbem
3. Re-enable the WMI service
Command: sc config winmgmt start= auto
Last command to run after above steps
4. Command: mofcomp "%programfiles(x86)%Microsoft SQL Server100Sharedsqlmgmproviderxpsp2up.mof"
File not found Error for above command.
View 3 Replies
View Related
Jun 10, 2015
I am in the process of moving databases from a SQL 2005 Standard version to a 2-node 2014 cluster.All of my 2005 databases back up successfully.They all restore without issue except for one database that has a full text catalog. I get this message
Msg 7610, Level 16, State 1, Line 2
Access is denied to "fileStoragedataMSSQLSERVERFullTextCatalog", or the path is invalid.
Msg 3156, Level 16, State 50, Line 2
File 'sysft_FTCatalog' cannot be restored to 'fileStoragedataMSSQLSERVERFullTextCatalog'. Use WITH MOVE to identify a valid location for the file.
Msg 3119, Level 16, State 1, Line 2
Problems were identified while planning for the RESTORE statement. Previous messages provide details.
Msg 3013, Level 16, State 1, Line 2
RESTORE DATABASE is terminating abnormally.
[code]....
I went as far as giving the folder full access to everyone temporarily and received the same error.
View 1 Replies
View Related
Apr 10, 2014
I ran the Advanced cluster preparation for a new sql instance on an existing cluster.
Slq Server 2012.
After is completed, it was successful, I realized I specified the wrong Instance Root directory.
Is it possible to remove what the preparation installed? Or is it possible to change the root directory?
View 3 Replies
View Related
Jul 6, 2015
Can I build a cluster by adding the cluster service, then the SQL instances, then add the other nodes and their passive SQL instances?I would lean to building the cluster first, the add the SQL instances.
View 4 Replies
View Related
Feb 18, 2014
I´ve been reading that SQL Server 2012 Always On is dependent on having a Windows Failover Cluster setup. Is that correct ?
View 6 Replies
View Related
Nov 6, 2014
I have following script which i am planning to run to drop all non-clustered primary keys on a database and then created as clustered. I am using someone else's script so don't know how to modify this. Some of primary key columns are used in references in other tables.
is there anyway i can drop the existing primary keys and using their original script then create again as clustered including restoring all foreign and reference keys and unique or no unique.
DECLARE @table NVARCHAR(512), @tablename NVARCHAR(512),
@sql NVARCHAR(MAX), @sql2 NVARCHAR(MAX), @sql3 NVARCHAR(MAX),
@column NVARCHAR(MAX);
DECLARE @indexname NVARCHAR(512);
SELECT name As 'Table'
[Code] ....
View 8 Replies
View Related
Oct 8, 2015
can we join a node in a windows cluster which is already in a different cluster?
We have this requirement as we need to setup readable secondary ( always on AG) on the third node.
View 2 Replies
View Related
Jul 15, 2015
We are planning to change all IPs of PRODUCTION Failover Cluster Setup. In my cluster setup ... we have 2 Physical Nodes with windows-2008, Roles are MSDTC and SQL-2008R2.
IP change for:
1. Both Nodes(Physical)
2. MSDTC
3. SQL Server
4. windows Cluster
So Almost... All IPs are going to change.
Im DBA here, I need to take care of SQL cluster and MSDTC. But I haven't performed this activity before.So I'm worrying about Impacts and consequences of this change. steps how should I perform this activity.
View 9 Replies
View Related
May 20, 2003
Hi all,
We have many tables which have cluster index on column with datatype 'Char(200)'.
Does anyone have script to change cluster index to noncluster for all user tables which have clustered index on a column with 'char(200)' datatype.
Thanks,
Deepak
View 2 Replies
View Related
Jul 26, 2015
Wanted to know about difference between cluster and non cluster index with example.
When to use cluster index and non cluster index .
View 3 Replies
View Related
Jun 10, 2015
CREATE TABLE [dbo].[Access](
[AdminID] [int] NOT NULL,
[FnID] [int] NOT NULL,
CONSTRAINT [PK_AccessFn] PRIMARY KEY NONCLUSTERED
[Code] ....
why the cluster and non cluster indexed created on the same key?
View 3 Replies
View Related
Jul 17, 2000
I am trying to upgrade a SQL Server 6.5(Cluster) to SQL Serevr 7.0 (Cluster)..I already have an intsllation of 7.0(On a Cluster),so this means that 6.5 and sql 7 are on seperate cluster's ,if i try to upgrade from 6.5 Cluster to 7.0 Cluster is asks me to uncluster 6.5 and 7.0 is this correct ,assume i cannot break the cluster then what???.. what is the best way i can achieve this functinality.....
thanks in advance
Jack
View 1 Replies
View Related
Sep 27, 2000
This morning I can not connect to our SQL Server 7.0 whatever from client or server. The error message which I list below:
++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++
A connection could not be estabished to server--Timeout expired
Please verfy SQL Server is running and check your SQL Server registration properties and try again.
++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++
We use windows NT authentication. We did not do any change on NT. The SQL Server daily schedule job usally stoped at 10:00AM, but today from the Window NT Task Manager, we can see that the SQL Server is still running untill now.
Please help!!!
View 3 Replies
View Related
May 8, 2007
Hi
We are planning to upgrade the SQL Server in our production environment from SQL Server 2000 to SQL Server 2005. This is a 4 Node cluster environment with 3 Databases on 3 Virtual instances. The main requirement is to achieve this with no/minimal downtime.
Could you please suggest or direct me to any documentation for the best practices used to upgrade such an environment?
Thanks
Priyanka
View 2 Replies
View Related
Aug 30, 2006
We have (had) an active/active cluster. 2 physical machines,
each running their own instance, clustered together. Node1/Ins1 and Node2/Ins2.
Node2 failed and Ins2 failed over to Node1 as it should. Node2 required that we
rebuild the server (rebuild = reinstall O/S). Now we need to get Node2 back
into the cluster and get Ins2 failed back over to Node2.
Does anyone know, for certain, the correct steps to accomplish this? Obviously,
we could backup everything and completely destroy Ins2 and recreate it on Node2
then rejoin the cluster. But I'm looking for something less destructive.
Is it possible to reinstall SQL, then rejoin the cluster, and then fail Node2
over? Or will there be registry conflictions?
Any help would be appreciated. Also, if you have any links to some official
documentation, that would be great too.
Thanks
View 4 Replies
View Related
Dec 28, 2007
We're upgrading a SQL Server 2000 cluster (Active/Passive) running on Windows 2000 Server to a SQL Server 2005 Cluster running on Windows Server 2003. We can't purchase new hardware and we have no spare hardware. We also need to move from Windows 2000 Server to Windows 2003 Server at the same time. We want to keep downtime to a bare minimum.
What we were thinking was the following steps... Anyone try this?
1. Break the link between the servers.
2. Install a fresh copy of windows 2003 server on one side along with SQL Server 2005. While this step is running, the active node would still be live on Windows 2000 Server and SQL Server 2000 serving our customers.
3. Restore a copy of a backup from the active production side to the node we're upgrading and at that point we would bring the active node down, switching the active node to be the newly upgraded server.
4. As a final step, the old active node would now have the link to it broken, we would install a fresh copy of windows 2003 server on it and sql server 2005. At this point we would bring it back into the cluster and the cluster would be complete again.
Thoughts?
View 2 Replies
View Related
May 14, 2008
Friends -
Need your help and guidence for doing upgrading SQL Server 2000 Cluster to SQL Server 2005 Cluster.
Let me explain my current environment.
1. Currently SQL Server 2000 Cluster environment is running on Windows 2000 Server we need to upgrade this to SQL Server 2005 on Windows 2003 Server. >>> Production environment.
My Plans:
1. On Testing Environment Install SQL Server 2000 cluster on Windows 2003 Server and do a restore of databases from the produciton environment.
2. Upgrade In-Place from SQL Server 2000 Cluster to SQL Server 2005 Cluster.
My doubts
1. Can i install SQL Server 2000 Cluster on Windows 2003 Server. Is it possible or not.
Please advise me and correct my steps.
Cheers
VSH
View 1 Replies
View Related
Oct 26, 2000
hi, I have settup up sql mail and did the following:
1. created an E-mail account and configured Out look by creating a pop3 mail profile. tested it by sending and receiving mail, that is ook
2. I Created one domain account for MSsqlserver and Sql Agent service. both services use same account and start automatically in the control panel-services
3. I used the profile that I created in outlook to test the sql mail but got an error:
Error 22030 : A MAPI error ( error number:273) occurred: MapiLogon Ex Failed due to MAPI
Error 273: MAPI Logon Failed
I really do not know what went wrong. I followed the steps from bol and still having a problem. Am I missing something.
I do have a valid email account
I do have a valid domain account
I tested outlook using the email account and it worked. so why sql server does not recognise MAPI.
My next question, How to configure MAPI in Sql server if what I did was wrong.
View 1 Replies
View Related
Mar 23, 2001
Hi, I have 2 windows 2000 server in cluster with sql server 2000 enterprise edition installed.
I have activated the Server-Requested Encryption by using the sql server network utility (Force Protocol Encryption). After this, I have stoped sql server service. But I can't start it at this moment.
The error is:
19015: The encrypton is required but no available certificat has been found.
Please help me to start sql server.
Thanks.
Michel
View 4 Replies
View Related
Jun 13, 2007
Can the SQL Cluster Virtual IP be the same as the cluster IP?
Can I set up the cluster like:
Node 1:10.0.0.1
Node 2:10.0.0.2
MSCS Shared:10.0.0.3
SQL Virtual:10.0.0.3
or do they need to be unique?
View 1 Replies
View Related
Jul 6, 2000
Hello,
I am facing a huge problem in my sql server database using access as a front end.The main problem is trying to execute queries "views" ,since they reside on sql server now,and using variables or parameters in reports and forms to filter on this query.
Ex.
how can the following be implemented using the same query but in sql server?
Access
------
SELECT MAT_Charts.YYYYMM
FROM MAT_Charts
WHERE ((([Area_Code] & "-" & [GROUP_CODE])=[Reports]![MAT_Chart_C1].[MAT_Key]))
GROUP BY MAT_Charts.YYYYMM;
It is specifically this statement in which I am interested:
[GROUP_CODE])=[Reports]![MAT_Chart_C1].[MAT_Key]))
Thank you very much for your concern.
View 2 Replies
View Related
Jul 4, 2007
I have two Windows 2000 servers (Advance Edition) to form a Windows Cluster. I also install MS SQL 2000 Enterprise Edition on the cluster to form a MS SQL cluster. Now, I want to upgrade the hardware and OS (but keep on using SQL 2000), so I install Windows 2003 server Enterprise Edition on two new servers to form a new Windows Cluster. I am planing to install MS SQL 2000 Enterprise Edition on the new cluster, so the old SQL cluster and new SQL cluster are side by side. I would like to know how to setup a new SQL cluster (I know it has problem to rename SQL Cluster name, so how to fix this problem)? And how to transfer everything (such as system databases, users database, sql user account, password and maintenance plan jobs etc) from old SQL cluster to new SQL cluster? And how to switch over from old SQL cluster to new SQL cluster?
Thanks a lot !
View 8 Replies
View Related
Mar 14, 2008
According to microsoft, we can cluster SSIS service but it is NOT RECOMMENDED.
http://msdn2.microsoft.com/en-us/library/ms345193.aspx
Now this is the situation that I have where I need to understand how SSIS works?
Enviornment: Active Active cluster enviornment for SQL server with SSIS server installed as stand alone as default on both node.
Name: Node 1 Node 2
--------- -------------- ---------------------
Server name: Nd1 Nd2
SQL server name: cs-nd1in01 cs-nd2in02
SSIS server name: Nd1 Nd2
BTW, this is cosolidated enviornment so there are more than one application expected and resides on each instance of SQL server.
The question is around SSIS, what would be the best practice to develop SSIS package that can work with above envoinrment.
Secnario: What if my Nd1 fails. SQL server cs-nd1IN01 will be failover to Nd2 and it will be available. But How about SSIS packages? How that understands
to use Nd2 SSIS as Nd1 SSIS is not available. Is anyone has similar experience to setup SSIS in cluster envionrment but as non-cluster service?
Please help. Thanks in adavance.
View 1 Replies
View Related
May 15, 2008
Friends -
Could any one of you provide steps for upgrading SQL Server 2000 cluster to SQL server 2005 cluster.
My environment is Windows 2003 server.
Appreciate your support.
Cheers
VSH
View 1 Replies
View Related
Dec 20, 2000
Hi everybody,
I have a batch which needs to be run every day night at 2:00 am.I Using At command but it is not working. if u have idea, please let me know
I AM USING THE FOLLOWING COMMAND :
AT 2:00AM C:SCHED.BAT
Thanks in advance
Krishna
View 3 Replies
View Related
Apr 19, 2008
hi all
its urgent really urgent
please reply soon
I am getting error in sysindexes when i run dbcc checkdb on a production db.
the error is Server: Msg 8928, Level 16, State 1, Line 1
please help me to remove this
all the options of dbcc checkdb as well as table are not helping me
thanks in advance
View 4 Replies
View Related
Apr 4, 2002
I am trying to configure a 2 node SQL cluster. MSCS is configured and is failing over correctly, however when I start the installation of SQL Server, and specify the IP address of the virtual server and hit next, the installation hangs, and stops responding. I have ran comclust.exe on both nodes and verified that MSDTC shows up in the cluster administrator. I have searched high and low to no avail---
View 2 Replies
View Related
May 24, 2000
I installed MS SQl 7.0 on MS Cluster 1.0 as Active/Active
I have NT Ent with sp6 and Sql 7.0 with Sp1.
After two days from the installation one of the SQl Failed to get online we checked in the log I found that the master Database get corrupted.
after the investigation I found that the Heart Beat cable was not their.
My question is : can the heart beat cable cause this corruption.
View 3 Replies
View Related
