SQL Check Expression
Mar 12, 2008I'm using SQL 2000 Enterprise Manager Diagram Check Constrains dialog ???????
How do I CHECK Expression so that cust_zip data is:
- all numbers
- 5<=length<=10
Thanks for any help...
ADVERTISEMENT
Date Check Expression
Feb 22, 2008feel like a dafty asking this one but can anyone tell me the proper syntax for checking if a date being inserted is greater than today ?
I have tried [datetobechecked] >= getdate()
without success in the expression editor
thanks
Problem In Expression Of A Check Constraint
Aug 15, 2006Hi all,
I wrote the expression below in a table's check constraint
(CustomerTypeID = 0 and ContentSiteID is null and ResellerID is null and AffiliateID is null and WhiteLabeLID is null ) or
( CustomerTypeID = 1 and ContentSiteID is not null and ResellerID is null and AffiliateID is null and WhiteLabeLID is null )
It saved it ok, but when I re-opened and viewed the expression again it was converted to:
([CustomerTypeID] = 0 and [ContentSiteID] is null and [ResellerID] is null and [AffiliateID] is null and [WhiteLabeLID] is null
[CustomerTypeID] = 1 and [ContentSiteID] is not null and [ResellerID] is null and [AffiliateID] is null and [WhiteLabeLID] is null )
This is a different logic because the OR is not prioritised above the AND.
Any solution or should I move my condition to the table's Update and Insert triggers?
Thanks!
Ofer
How To Check Null Or '' In Date Field In Expression And ...............
Aug 16, 2006I have a column say 'ActivationDate' which is a (database timestamp [DT_DBTIMESTAMP]) which I want to replace with an expression in derived columns
The condition is if 'ActivationDate' field is null or '' then 'Null' else 'ActivationDate'
I am struggling to write this condition. Without condition i.e. at present it saves the value in this database '1753-01-01 00:00:00.000'.
In the preview the 'ActivationDate'field does not show any thing so I recon it is either null or ''
Reporting Services :: Use IIF IsNothing Expression And Check Another Condition?
Jul 29, 2015Is it possible to use a IIF IsNothing expression and check another condition? For all the values that are blank, I want it to check another column if  "Disposition" = 2 then I want to show "Inactive"
=iif(isnothing(Fields!Value)," ","MS " & Fields!Value)
URGENT - My Error Or Bug? The Result Of The Expression Cannot Be Written To The Property. The Expression Was Evaluated, But
Feb 8, 2007Error 3 Error loading MLS_AZ_PHX.dtsx: The result of the expression ""C:\sql_working_directory\MLS\AZ\Phoenix\Docs\Armls_Schema Updated 020107.xls"" on property "ConnectionString" cannot be written to the property. The expression was evaluated, but cannot be set on the property. c:documents and settingsviewmastermy documentsvisual studio 2005projectsm l sMLS_AZ_PHX.dtsx 1 1
"C:\sql_working_directory\MLS\AZ\Phoenix\Docs\Armls_Schema Updated 020107.xls"
Directly using C:sql_working_directoryMLSAZPhoenixDocsArmls_Schema Updated 020107.xls
as connectionString works
However - I'm trying to deploy the package - and trying to use expression:
@[User::DIR_WORKING] + "\Docs\Armls_Schema Updated 020107.xls"
which causes the same error to occur
(Same error with other Excel source also:
Error 5 Error loading MLS_AZ_PHX.dtsx: The result of the expression "@[User::DIR_WORKING] + "\Docs\Armls_SchoolCodesJuly06.xls"" on property "ConnectionString" cannot be written to the property. The expression was evaluated, but cannot be set on the property. c:documents and settingsviewmastermy documentsvisual studio 2005projectsm l sMLS_AZ_PHX.dtsx 1 1
)
Reporting Services :: Running Value Expression Within Lookup Expression In SSRS?
Oct 28, 2015I have created 1 report with 2 datasets. This report is attached to the 1st dataset.For example,1st one is "Smallappliances", 2nd is "Largeappliances".
I created a tablix and, the 1st column extracts Total sales per Sales person between 2 dates from 1st dataset (Small appliances). I used running values expression and it works fine.
Now, I would like to add another column that extracts Total sales per sales person between 2 dates from 2nd dataset (Large appliances). I am aware that I need to use Lookup expression and it is giving me the single sales value rather than the total sales values. So, I wanted to use RunningValue expression within lookup table to get total sales for large appliances.
This is the lookup expression that I added for the 2nd column.
=Lookup(Fields!salesperson.Value,Fields!sales_person.Value,RunningValue(Fields!sales_amount.Value,
sum, " sales_person"),
"Largeappliances").
I get this error when I preview the report.An error occurred during local report processing.The definition of the report is invalid.An unexpected error occurred in report processing.
(processing): (SortExpression ++ m_context.ExpressionType)
Data Access :: How To Check All Connection Automatically During Routine Check By Using Batch File
May 20, 2015I have multiple ODBC connection and how to check all connection automatically during routine check by using batch file.
View 5 Replies View RelatedHelp Please (Check File Exists/ Archive File/ Check If File Empty)
Mar 10, 2008
Hello World,
I'm new to SSIS and would like a little assistance getting started, if possible...
Here is what I want to do:
Check if file exist (C:DTS UpgradeFilexxx.txt) --->
Archive file (C:DTS UpgradeArchive) --->
Check if file has data (true or false)
AND/OR
If there are any good website that have good direction, let me know
Thanks in advance for your help!!!
Which Expression To Use ?
May 27, 2008well I have this code. I connect to database and submit data.
now i dont know which expression to use to validate if data is submited redirect to next level else show some error.
protected void Button1_Click1(object sender, EventArgs e) { SqlConnection con = new SqlConnection(@"somecode");
SqlCommand comm = new SqlCommand(); comm.Connection = con; comm.CommandText = "insertuser"; comm.CommandType = CommandType.StoredProcedure;some code... comm.Connection.Open(); comm.ExecuteNonQuery(); con.Close(); }
i dont wanna validate the fields as i can do it using field validator i wanna check if data is inserted in database.
Only One Expression Can Be Specified
May 28, 2008Hi
When I try and create this procedure, I get the error below
CREATE PROCEDURE GetUserSearchTypesCount
-- OUTPUT parameter to hold the count.
@UserID int,
@ReturnVal int OUTPUT
AS
SET @ReturnVal = (SELECT TOP 100 percent searchType, COUNT(searchtype) AS SearchCount
FROM ttracksearchresults
WHERE userid=@UserID
GROUP BY searchtype
ORDER BY searchtype)
GO
Error: Only one expression can be specified in the select list when the subquery is not introduced with EXISTS.
Expression In SET
Feb 7, 2007I need a statement like:UPDATE tblQuestions SET QuestionNumber = QuestionNumber +1 WHERE QuestionNumber >=10 AND TestID = 1 AND SectionNumber = 1
(Required output is clear from statement itself)
I tried with
UPDATE tblQuestions SET QuestionNumber = EVAL(QuestionNumber +1) WHERE QuestionNumber >=10 AND TestID = 1 AND SectionNumber = 1
and
UPDATE tblQuestions SET QuestionNumber = (QuestionNumber +1) WHERE QuestionNumber >=10 AND TestID = 1 AND SectionNumber = 1
I've just started working with SQL. Please suggest correct approach.
Expression
Feb 1, 2008I have the following code in the expression builder for a ExecuteSQL Task in the Control Flow.
"INSERT dbo.StgFileList SELECT ' " + @[User::MyFile] + " ' "
When I evaluate it, it renders as INSERT Staging.StgXMLFileList SELECT ' '
What am I doing wrong in the expression builder?
Expression Help
Feb 20, 2008
Is it possible to nest expressions within a script in a similar fashion to how they're nested within the expression editor?
I have a requirement to strip trailing digits from a string field, so that only two decimal places are left.
e.g.
1.12345 becomes 1.12
12345.6789 becomes 12345.67
I would do this in the expression editor but I need to use Script component because there are a multitude of conditions that need to be evaluated first which I will do inside a Select Case statement.
I'm wrestling with code that looks like
Newratefield = ratefield.Substring(1, Findstring(ratefield, ".", 1) + 2)
but VB doesn't like the 'Findstring(ratefield, ".", 1) + 2)' part.
Any suggestions on what I can do here?
Expression
Jan 9, 2007Hi,
In RunningValue expression, can we able to put the DataSet name.
Thanks
Expression
Jul 27, 2007Hi,
In ssis I would like to map a column from table a to a column in table b
Currently this is how I am doing it using sql.
I believe I have to use a derived column but not sure how to implement if statement inside it.
Thanks
case
when len([Column 5]) = 0 then ''
when lower([Column 5]) = 'unknown' then ''
when isdate([Column 5]) = 1 then substring(ltrim([Column 5]), 1, 4) + substring(ltrim([Column 5]), 6, 2) + substring(ltrim([Column 5]), 9, 2)
else
null
end,
The Value Expression
Dec 20, 2006The Value expression for the textbox €˜Name€™ uses an aggregate expression without a scope. A scope is required for all aggregates used outside of a data region unless the report contains exactly one data set....what does this mean...this an error that I have when i try and build my report i get this error for some reason...how do i fix this???
View 4 Replies View RelatedNeed Help With Expression
Sep 28, 2007Hi,
I need to replace a field that might contain a certain character with another should the value occur.
To explain
If i get a hash # in the field, then I need to replace the whole field with a 0 since its a numeric field
I'm just a bit of a noob still with expressions
Regards
Expression Sum And Iif Help?
Aug 17, 2007
Hi All,
SUM(IIF(Fields!NO.Value >= 1, Fields!tsHours.Value,0))
i write this expression inside the group footer row, it give a #error when generating report.
please help
Cheers
Nick
Expression.Like For Numbers?
Aug 26, 2007Hi,
Is it possible to search in columns with a number datatype (I'm using an MS SQL database with bigint columns) with the ICriterion Expression.Like?
Normally the Expression.Like is used for varchar columns. However, if there's a bigint column with the value 167829 I want to search for example on %678%.
Cheers,
koekie
Boolean Expression In SQL
Jun 30, 2005Hello,In VB/VB.NET, I can use an expression as such to evaluate true/false:Dim blnValue As Boolean = (SomeObject.Property = "Some value")Can I do this in T-SQL?declare @var bitset @var = ?Thanks.
View 2 Replies View RelatedSQL Expression Needed
Jan 12, 2006Hello, I need to create a table where a column's data should have a hypen inserted after the second character. The table will accept a large input of rows, so I think it would be better to use a SQL expression or formula on the column to provide the hyphen on insert rather than doing an update statement later. There is no way of knowing how many characters will follow the hyphen.
So for example... 888888 would become 88-8888
or 5555555555555555 would become 55-55555555555555
Any help would be great!
Regular Expression
Jan 10, 2007Hi Guys
I have a table in which one of the column name is "NAME".
I have to write query in which column is not null and if there is something then check for 'trust' or 'trustee' in the string. and if found don't pull that record. skip it
who do i do these. Any help please.
CONCAT + Expression
Mar 2, 2006how can i CONCAT 2 columns & () ?
SELECT CONCAT(A,B) AS C From myTAble
but I want to get A (B)
dog (red)
thank you
Regular Expression?
Mar 25, 2008HiI'm looking to return rows from a table where a column is LIKE a keyword. This is my current code:SELECT DISTINCT business_name FROM Table WHERE business_name LIKE @keyword + '%' ORDER BY business_name ASCThe problem with this is that if a business is called "The White Ship Inn", and the keyword to match is "White Ship" it will not match. If i put another wild card in front of @keyword then this finds too many matches - i need it to match against columns which either start with the keyword, or have a whitespace in front of them. Is there some kind of T-Sql i can use or will i have to go down the regex route (using this (http://www.codeproject.com/KB/mcpp/xpregex.aspx)) ?cheers
View 2 Replies View RelatedRegular Expression..
May 6, 2004Does SqlServer support Regular expression?
I want to know if it's avilable or not...
And if it's not available, I want to know any other efficient way to validate string.. manipulating Regular expression style validation.
Thank you all...
Only One Expression Can Be In SELECT
Feb 2, 2014The full error is this: Only one expression can be specified in the select list when the subquery is not introduced with EXISTS.
My Code:
SELECT Customers.CustomerID, Customers.EmailAddress, Customers.LastName, Customers.FirstName,
(SELECT Addresses.Line1, Addresses.Line2, Addresses.City, Addresses.State, Addresses.ZipCode FROM Addresses JOIN Customers
ON Addresses.CustomerID = Customers.CustomerID WHERE Addresses.AddressID = Customers.BillingAddressID),
(SELECT Addresses.Line1, Addresses.Line2, Addresses.City, Addresses.State, Addresses.ZipCode FROM Addresses JOIN Customers
ON Addresses.CustomerID = Customers.CustomerID WHERE Addresses.AddressID = Customers.ShippingAddressID)
FROM Customers JOIN Addresses
ON Customers.CustomerID = Addresses.CustomerID;
I am trying to test a query I am going to use to create a view with all of a customers addresses (billing and shipping).
Is It Possible To Format An Expression?
Sep 12, 2005I have an expression based upon 2 fields in a view that I want to be able to divide and then multiply by a number. Whenever I do the division portion of the calculation all I get are 0 & 1's. I was hoping to use the percentage in other calculations.
Is there something similar to FORMAT(X/Y,0.00)?
(vwLbrPosSum.PosMin/vwMinByEmp.TotMin) x (a)vwLbrPosSum.PosMin or (b) 2400 or (c)vwMinbyEmp.TotMin - 2400
If the person worked more than 40 hrs I could allocate the OTMins to the different positions in labor reporting.
Thanks in advance for your assistance.
Expression To Find 0
Dec 4, 2007Hi i'd like to create a expression to find if the first character is 0 and if it is then don't display it, but if the first charactar is not 0 then its ok, am trying to do this within a drived column in SSIS
View 14 Replies View RelatedFilter Expression
Jul 23, 2005HiI have some data that need to be filtered based on a SET of Id's.If it's about a single ID, then i would pass it as a parameter in astored procedure and use it within the the WHERE Clause, but here thoseID's are determined in run time and I can't simply create a a storedprocedure for an unknown amount of ID's.I looked into the SQL Server 8.0 Manual but had no examples how to usethe Function Filter.Generaly, how can filter some records based on a set of ID's?Best regards
View 1 Replies View RelatedRegular Expression?
Sep 6, 2005I need to remove all the [ and ] in every sql stmt where they are usedto close encircling numeric value, fyi, all these sql stmt areconverted from an Access db. For instance,select *from XYZtblwhere fieldA = [1] or fieldA = [2] or fieldA = [3]to beselect *from XYZtblwhere fieldA = 1 or fieldA = 2 or fieldA = 3-- and of course I'd have written in as follows, but that's not-- the pointselect *from XYZtblwhere fieldA IN (1,2,3)Thanks.
View 5 Replies View RelatedUsing Alias In An Expression
Jul 20, 2005HiI tried to use the alias a1 for the column f1 like this, but it fails:create table a (f1 int not null primary key)insert into a (f1) values (2)select f1 a1 from a where a1 = 2Server: Msg 207, Level 16, State 3, Line 1Invalid column name 'a1'.In my real situation f1 is a "pretty complex" calculation, and a1 is analias of that.I wanted to use the alias in the query instead of repeating the calculationseveral times.If this use of alias is not legal, then is there a way to get around this?TIAGunnar VøyenliEDB-konsulent asNORWAY
View 2 Replies View RelatedExpression Problem
Apr 14, 2008Hello,
I need to pass a parameter that has multiple values depending on a picklist. I'll show you an schema of what I need:
Parameters:
label value
Open 11
Closed -1
Others >0 and <11
Of course there's no problem with "open" and "closed", but I don't know how to build an expression for "others". Can you help me?
Thanks in advance, regards