SQL Command Columns

Jan 31, 2006

I entered an SQL Command into an OLEDB datasource and was able to preview the results but no columns were available for mapping. If anyone can tell me what I doing wrong I would much appreciate it.

Dick Campbell

View 1 Replies


ADVERTISEMENT

No External Columns Available From SQL Command?

May 9, 2008

Hello.

I have a OLE DB Data Source Component that uses an SQL command as the data access mode. On the Connection Manager "tab" of the OLE DB Source Editor I can sucessfully parse my query and produce a preview of the data.

However, when I go to the Columns tab I see no available external columns? Apart from the fact I'm using a union I can't think of any reason why I can't see any columns, it doesn't make sense.

Please Help.

Thanks

View 7 Replies View Related

OLE DB Command Transform And Output Columns.

Jan 10, 2007

Hi All,

I have an OLE DB transform with a SQL Command of:

sp_get_sponsor_parent ?,? OUTPUT

where sp_get_sponsor_parent is defined like:




CREATE PROCEDURE [dbo].[sp_get_sponsor_parent]

@pEID int,

@results int OUTPUT

AS

BEGIN


.

.

.
END

I map the columns, refresh & OK out of the component without trouble, but on executing the package it fails during validation on this component. I'm utterly stumped.
Any light shed would be greatly appreciated.
Many thanks in advance,
Tamim.

View 3 Replies View Related

Any T-SQL Command Can Show The Description Of Specified Table Columns?

Mar 22, 2004

I want to ask something because i need.

Any SQL/T-SQL command inside MsSQL Server 2000 can show the description of {all table columns or specified table columns} of specified table inside specified database?

can you teach me how to do and any example(s)?

View 2 Replies View Related

Maximum Number Of Destination Columns In OLE DB Command??

Apr 29, 2008

I'm using 2 OLE DB Commands; 1 to perform an insert the other an update. I have found that on the column mapping tab, I only have 10 parameters available to map to. The issue is I need 40 parameters. Am I doing something wrong? Is there a setting I am missing? Is there another way to do this? Am I out of luck .
Here is the sql query I am using, so you can see that I have the correct number of parameters listed:

Insert into Reqs_Data (G_COLLECTDATE, PROGRAM, PRODUCT_ID, TOTAL, ADDED, CHANGED, DELETED, NOT_ALLOCATED, NEWREQS, MODIFIED, LEGACY, UNCATEGORIZED, NOT_TRACED_DOWN, NOT_TRACED_UP, PASSED, PARTIALLY_PASSED, WAIVED, FAILED, NOT_VERIFIED, PLANNED_ADDED, RQTS_TOTAL_TBD_COUNT, RQTS_TOTAL_MODS_IN_MONTH, BUILD_ID, RTM_PRODUCT_ID, TRACED_UP, TRACED_DOWN, ALLOCATED, LASTMONTHTOTAL, CALC_ADD, CALC_DELETE, IS_TRACED_DOWN, IS_TRACED_UP, LEVEL3, LEVEL2, LEVEL1, LEVEL0, IPT1, IPT2, IPT3, IPT4 ) Values(?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)


Update Reqs_Data SET TOTAL = ?, ADDED = ?, CHANGED = ?, DELETED = ?, NOT_ALLOCATED = ?, NEWREQS = ?, MODIFIED = ?, LEGACY = ?, UNCATEGORIZED = ?, NOT_TRACED_DOWN = ?, NOT_TRACED_UP = ?, PASSED = ?, PARTIALLY_PASSED = ?, WAIVED = ?, FAILED = ?, NOT_VERIFIED = ?, PLANNED_ADDED = ?, RQTS_TOTAL_TBD_COUNT = ?, RQTS_TOTAL_MODS_IN_MONTH = ?, BUILD_ID = ?, RTM_PRODUCT_ID = ?, TRACED_UP = ?, TRACED_DOWN = ?, ALLOCATED = ?, LASTMONTHTOTAL = ?, CALC_ADD = ?, CALC_DELETE = ?, IS_TRACED_DOWN = ?, IS_TRACED_UP = ?, LEVEL3 = ?, LEVEL2 = ?, LEVEL1 = ?, LEVEL0 = ?, IPT1 = ?, IPT2 = ?, IPT3 = ?, IPT4 = ?
WHERE G_Collectdate = ? AND Program = ? AND PRODUCT_ID = ?

View 5 Replies View Related

INSERT INTO Command (two Columns) With One Fixed Value, One String With Several Values

Nov 7, 2006

I have a string with values value1,value2, value3, value(n) which I would like to append to my table.
In the second column of my table I have a parameter which stays the same, so I end up with (if the parameter value is "123456")
Column 1   |         Column 2
123456      |         Value1
123456      |         Value2
123456      |         Value3
I would like to set up a single SQL statement which will process this regardless of the number of values (therefore rows) desired.
Something like:
INSERT INTO dbo_tblUserLevelApplicationRequests ( Column1, Column2) select EmployeeNumberParam as EmployeeNumber, ((stringofvalues) as valuestring)
Is it possible to do this with a single SQL statement?

View 2 Replies View Related

RS2k Issue: PDF Exporting Report With Hidden Columns, Stretches Visible Columns And Misplaces Columns On Spanned Page

Dec 13, 2007

Hello:

I am running into an issue with RS2k PDF export.

Case: Exporting Report to PDF/Printing/TIFF
Report: Contains 1 table with 19 Columns. 1 column is static, the other 18 are visible at the users descretion. Report when printed/exported to pdf spans 2 pages naturally, 16 on the first page, 3 on the second, and the column widths have been adjusted to provide a perfect page span .

User A elects to hide two of the columns, and show the rest. The report complies and the viewable version is perfect, the excel export is perfect.. the PDF export on the first page causes every fith column, starting with the last column that was hidden to be expanded to take up additional width. On the spanned page, it renders the first column on that page correctly, then there is a white space gap equal to the width of the hidden columns and then the rest of the cells show with the last column expanded to take up the same width that the original 2 columns were going to take up, plus its width.

We have tried several different settings to see if it helps this issue or makes it worse. So far cangrow/canshrink/keep together have made no impact. It is not possible to increase the page size due to limited page size selection availablility for the client. There are far too many combinations of what the user can elect to show or hide to put together different tables to show and hide on the same report to remove this effect.

Any help or suggestion on this issue would be appreciated

View 1 Replies View Related

Defining Command,commandtype And Connectionstring For SELECT Command Is Not Similar To INSERT And UPDATE

Feb 23, 2007

i am using visual web developer 2005 and SQL 2005 with VB as the code behindi am using INSERT command like this        Dim test As New SqlDataSource()        test.ConnectionString = ConfigurationManager.ConnectionStrings("DatabaseConnectionString1").ToString()        test.InsertCommandType = SqlDataSourceCommandType.Text        test.InsertCommand = "INSERT INTO try (roll,name, age, email) VALUES (@roll,@name, @age, @email) "                  test.InsertParameters.Add("roll", TextBox1.Text)        test.InsertParameters.Add("name", TextBox2.Text)        test.InsertParameters.Add("age", TextBox3.Text)        test.InsertParameters.Add("email", TextBox4.Text)        test.Insert() i am using UPDATE command like this        Dim test As New SqlDataSource()        test.ConnectionString = ConfigurationManager.ConnectionStrings("DatabaseConnectionString").ToString()        test.UpdateCommandType = SqlDataSourceCommandType.Text        test.UpdateCommand = "UPDATE try SET name = '" + myname + "' , age = '" + myage + "' , email = '" + myemail + "' WHERE roll                                                         123 "        test.Update()but i have to use the SELECT command like this which is completely different from INSERT and  UPDATE commands   Dim tblData As New Data.DataTable()         Dim conn As New Data.SqlClient.SqlConnection("Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|Database.mdf;Integrated                                                                                Security=True;User Instance=True")   Dim Command As New Data.SqlClient.SqlCommand("SELECT * FROM try WHERE age = '100' ", conn)   Dim da As New Data.SqlClient.SqlDataAdapter(Command)   da.Fill(tblData)   conn.Close()                   TextBox4.Text = tblData.Rows(1).Item("name").ToString()        TextBox5.Text = tblData.Rows(1).Item("age").ToString()        TextBox6.Text = tblData.Rows(1).Item("email").ToString()       for INSERT and UPDATE commands defining the command,commandtype and connectionstring is samebut for the SELECT command it is completely different. why ?can i define the command,commandtype and connectionstring for SELECT command similar to INSERT and UPDATE ?if its possible how to do ?please help me

View 2 Replies View Related

Using A Variable In SSIS - Error - Command Text Was Not Set For The Command Object..

Nov 4, 2006

Hi All,

i am using a OLE DB Source in my dataflow component and want to select rows from the source based on the Name I enter during execution time. I have created two variables,

enterName - String packageLevel (will store the name I enter)

myVar - String packageLevel. (to store the query)

I am assigning this query to the myVar variable, "Select * from db.Users where (UsrName = " + @[User::enterName] + " )"

Now in the OLE Db source, I have selected as Sql Command from Variable, and I am getting the variable, enterName,. I select that and when I click on OK am getting this error.

Error at Data Flow Task [OLE DB Source [1]]: An OLE DB error has occurred. Error code: 0x80040E0C.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E0C Description: "Command text was not set for the command object.".

Can Someone guide me whr am going wrong?

myVar variable, i have set the ExecuteAsExpression Property to true too.

Please let me know where am going wrong?

Thanks in advance.








View 12 Replies View Related

Do Somebody Know How Long (in Chars) Script(command) Can Be Solved By SQL Command?

Aug 30, 2004

Do somebody know how long (in chars) script(command) can be solved by SQL Command?
Thanks

View 1 Replies View Related

What Command Is Used To Get Back The Privileges Offered By The GRANT Command?

Mar 10, 2007

reply.

View 1 Replies View Related

Command Text Was Not Set For The Command Object Error

Sep 19, 2006

Hi. I am writing a program in C# to migrate data from a Foxpro database to an SQL Server 2005 Express database. The package is being created programmatically. I am creating a separate data flow for each Foxpro table. It seems to be doing it ok but I am getting the following error message at the package validation stage:

Description: An OLE DB Error has occured. Error code: 0x80040E0C.

An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E0C Description: "Command text was not set for the command object".

.........

Description: "component "OLE DB Destination" (22)" failed validation and returned validation status "VS_ISBROKEN".

This is the first time I am writing such code and I there must be something I am not doing correct but can't seem to figure it out. Any help will be highly appreciated. My code is as below:

private bool BuildPackage()

{




// Create the package object

oPackage = new Package();

// Create connections for the Foxpro and SQL Server data

Connections oPkgConns = oPackage.Connections;

// Foxpro Connection

ConnectionManager oFoxConn = oPkgConns.Add("OLEDB");

oFoxConn.ConnectionString = sSourceConnString; // Created elsewhere

oFoxConn.Name = "SourceConnectionOLEDB";

oFoxConn.Description = "OLEDB Connection For Foxpro Database";

// SQL Server Connection

ConnectionManager oSQLConn = oPkgConns.Add("OLEDB");

oSQLConn.ConnectionString = sTargetConnString; // Created elsewhere

oSQLConn.Name = "DestinationConnectionOLEDB";

oSQLConn.Description = "OLEDB Connection For SQL Server Database";

// Add Prepare SQL Task

Executable exSQLTask = oPackage.Executables.Add("STOCK:SQLTask");

TaskHost thSQLTask = exSQLTask as TaskHost;

thSQLTask.Properties["Connection"].SetValue(thSQLTask, "oSQLConn");

thSQLTask.Properties["DelayValidation"].SetValue(thSQLTask, true);

thSQLTask.Properties["ResultSetType"].SetValue(thSQLTask, ResultSetType.ResultSetType_None);

thSQLTask.Properties["SqlStatementSource"].SetValue(thSQLTask, @"C:LPFMigrateLPF_Script.sql");

thSQLTask.Properties["SqlStatementSourceType"].SetValue(thSQLTask, SqlStatementSourceType.FileConnection);

thSQLTask.FailPackageOnFailure = true;



// Add Data Flow Tasks. Create a separate task for each table.

// Get a list of tables from the source folder

arFiles = Directory.GetFileSystemEntries(sLPFDataFolder, "*.DBF");

for (iCount = 0; iCount <= arFiles.GetUpperBound(0); iCount++)

{


// Get the name of the file from the array

sDataFile = Path.GetFileName(arFiles[iCount].ToString());

sDataFile = sDataFile.Substring(0, sDataFile.Length - 4);

oDataFlow = ((TaskHost)oPackage.Executables.Add("DTS.Pipeline.1")).InnerObject as MainPipe;

oDataFlow.AutoGenerateIDForNewObjects = true;



// Create the source component

IDTSComponentMetaData90 oSource = oDataFlow.ComponentMetaDataCollection.New();

oSource.Name = (sDataFile + "Src");

oSource.ComponentClassID = "DTSAdapter.OLEDBSource.1";

// Get the design time instance of the component and initialize the component

CManagedComponentWrapper srcDesignTime = oSource.Instantiate();

srcDesignTime.ProvideComponentProperties();

// Add the connection manager

if (oSource.RuntimeConnectionCollection.Count > 0)

{


oSource.RuntimeConnectionCollection[0].ConnectionManagerID = oFoxConn.ID;

oSource.RuntimeConnectionCollection[0].ConnectionManager = DtsConvert.ToConnectionManager90(oFoxConn);

}

// Set Custom Properties

srcDesignTime.SetComponentProperty("AccessMode", 0);

srcDesignTime.SetComponentProperty("AlwaysUseDefaultCodePage", true);

srcDesignTime.SetComponentProperty("OpenRowset", sDataFile);

// Re-initialize metadata

srcDesignTime.AcquireConnections(null);

srcDesignTime.ReinitializeMetaData();

srcDesignTime.ReleaseConnections();

// Create Destination component

IDTSComponentMetaData90 oDestination = oDataFlow.ComponentMetaDataCollection.New();

oDestination.Name = (sDataFile + "Dest");

oDestination.ComponentClassID = "DTSAdapter.OLEDBDestination.1";

// Get the design time instance of the component and initialize the component

CManagedComponentWrapper destDesignTime = oDestination.Instantiate();

destDesignTime.ProvideComponentProperties();

// Add the connection manager

if (oDestination.RuntimeConnectionCollection.Count > 0)

{


oDestination.RuntimeConnectionCollection[0].ConnectionManagerID = oSQLConn.ID;

oDestination.RuntimeConnectionCollection[0].ConnectionManager = DtsConvert.ToConnectionManager90(oSQLConn);

}

// Set custom properties

destDesignTime.SetComponentProperty("AccessMode", 2);

destDesignTime.SetComponentProperty("AlwaysUseDefaultCodePage", false);

destDesignTime.SetComponentProperty("OpenRowset", "[dbo].[" + sDataFile + "]");



// Create the path to link the source and destination components of the dataflow

IDTSPath90 dfPath = oDataFlow.PathCollection.New();

dfPath.AttachPathAndPropagateNotifications(oSource.OutputCollection[0], oDestination.InputCollection[0]);

// Iterate through the inputs of the component.

foreach (IDTSInput90 input in oDestination.InputCollection)

{


// Get the virtual input column collection

IDTSVirtualInput90 vInput = input.GetVirtualInput();

// Iterate through the column collection

foreach (IDTSVirtualInputColumn90 vColumn in vInput.VirtualInputColumnCollection)

{


// Call the SetUsageType method of the design time instance of the component.

destDesignTime.SetUsageType(input.ID, vInput, vColumn.LineageID, DTSUsageType.UT_READWRITE);

}

//Map external metadata to the inputcolumn

foreach (IDTSInputColumn90 inputColumn in input.InputColumnCollection)

{


IDTSExternalMetadataColumn90 externalColumn = input.ExternalMetadataColumnCollection.New();

externalColumn.Name = inputColumn.Name;

externalColumn.Precision = inputColumn.Precision;

externalColumn.Length = inputColumn.Length;

externalColumn.DataType = inputColumn.DataType;

externalColumn.Scale = inputColumn.Scale;

// Map the external column to the input column.

inputColumn.ExternalMetadataColumnID = externalColumn.ID;

}

}

}

// Add precedence constraints to the package executables

PrecedenceConstraint pcTasks = oPackage.PrecedenceConstraints.Add((Executable)thSQLTask, oPackage.Executables[0]);

pcTasks.Value = DTSExecResult.Success;

for (iCount = 1; iCount <= (oPackage.Executables.Count - 1); iCount++)

{


pcTasks = oPackage.PrecedenceConstraints.Add(oPackage.Executables[iCount - 1], oPackage.Executables[iCount]);

pcTasks.Value = DTSExecResult.Success;

}

// Validate the package

DTSExecResult eResult = oPackage.Validate(oPkgConns, null, null, null);

// Check if the package was successfully executed

if (eResult.Equals(DTSExecResult.Canceled) || eResult.Equals(DTSExecResult.Failure))

{


string sErrorMessage = "";

foreach (DtsError pkgError in oPackage.Errors)

{


sErrorMessage = sErrorMessage + "Description: " + pkgError.Description + "";

sErrorMessage = sErrorMessage + "HelpContext: " + pkgError.HelpContext + "";

sErrorMessage = sErrorMessage + "HelpFile: " + pkgError.HelpFile + "";

sErrorMessage = sErrorMessage + "IDOfInterfaceWithError: " + pkgError.IDOfInterfaceWithError + "";

sErrorMessage = sErrorMessage + "Source: " + pkgError.Source + "";

sErrorMessage = sErrorMessage + "Subcomponent: " + pkgError.SubComponent + "";

sErrorMessage = sErrorMessage + "Timestamp: " + pkgError.TimeStamp + "";

sErrorMessage = sErrorMessage + "ErrorCode: " + pkgError.ErrorCode;

}

MessageBox.Show("The DTS package was not built successfully because of the following error(s):" + sErrorMessage, "Package Builder", MessageBoxButtons.OK, MessageBoxIcon.Information);

return false;

}

// return a successful result

return true;
}

View 2 Replies View Related

Transact SQL :: Select And Parse Json Data From 2 Columns Into Multiple Columns In A Table?

Apr 29, 2015

I have a business need to create a report by query data from a MS SQL 2008 database and display the result to the users on a web page. The report initially has 6 columns of data and 2 out of 6 have JSON data so the users request to have those 2 JSON columns parse into 15 additional columns (first JSON column has 8 key/value pairs and the second JSON column has 7 key/value pairs). Here what I have done so far:

I found a table value function (fnSplitJson2) from this link [URL]. Using this function I can parse a column of JSON data into a table. So when I use the function above against the first column (with JSON data) in my query (with CROSS APPLY) I got the right data back the but I got 8 additional rows of each of the row in my table. The reason for this side effect is because the function returned a table of 8 row (8 key/value pairs) for each json string data that it parsed.

1. First question: How do I modify my current query (see below) so that for each row in my table i got back one row with 19 columns.

SELECT A.ITEM1,A.ITEM2,A.ITEM3,A.ITEM4, B.*
FROM PRODUCT A
CROSS APPLY fnSplitJson2(A.ITEM5,NULL) B

If updated my query (see below) and call the function twice within the CROSS APPLY clause I got this error: "The multi-part identifier "A.ITEM6" could be be bound.

2. My second question: How to i get around this error?

SELECT A.ITEM1,A.ITEM2,A.ITEM3,A.ITEM4, B.*, C.*
FROM PRODUCT A
CROSS APPLY fnSplitJson2(A.ITEM5,NULL) B,  fnSplitJson2(A.ITEM6,NULL) C

I am using Microsoft SQL Server 2008 R2 version. Windows 7 desktop.

View 14 Replies View Related

T-SQL (SS2K8) :: Select Group On Multiple Columns When At Least One Of Non Grouped Columns Not Match

Aug 27, 2014

I'd like to first figure out the count of how many rows are not the Current Edition have the following:

Second I'd like to be able to select the primary key of all the rows involved

Third I'd like to select all the primary keys of just the rows not in the current edition

Not really sure how to describe this without making a dataset

CREATE TABLE [Project].[TestTable1](
[TestTable1_pk] [int] IDENTITY(1,1) NOT NULL,
[Source_ID] [int] NOT NULL,
[Edition_fk] [int] NOT NULL,
[Key1_fk] [int] NOT NULL,
[Key2_fk] [int] NOT NULL,

[Code] .....

Group by fails me because I only want the groups where the Edition_fk don't match...

View 4 Replies View Related

SQL Server 2014 :: Creating A Table With Updatable Columns And Read-only Columns

May 26, 2015

Here is My requirement, I'm not sure if this is possible. Creating table called master like col1, col2 col3, col4 , col5 ...Where Col1, col2 are updatable - this can be done easily

Col3, col4 are columns in another table but these can be just a read only ?? Is this possible ? this is possible with View but not friendly with share point CRUD...Col 5 is a computed column of col 2 and col5 ? if above step can be done then sure this can be done I guess.

View 4 Replies View Related

Hiding/Showing Columns Based On The Columns Present In The Dataset

Jun 27, 2007

I have query which retrieves multiple column vary from 5 to 15 based on input parameter passed.I am using table to map all this column.If column is not retrieved in the dataset(I am not talking abt Null data but column is completely missing) then I want to hide it in my report.

Can I do that??

Any reply showing me the right way is appricited.



-Thanks,

Digs

View 3 Replies View Related

How Dose It Matter For The Non-clustered Index Key Columns And Included Columns?

Apr 24, 2007

Hi, all experts here,

Thanks a lot for your kind attention.

As I am creating the non-clustered indexes for the tables, I dont quite understand how dose it really matter to put the columns in the index key columns or put them into the included columns of the index?

I am really confused about that and I am looking forward to hearing from you and thank you very much again for your advices and help.

With best regards,

Yours sincerely,

View 4 Replies View Related

A Word About Meta-data, Pass Through Columns And Derived Columns

Oct 13, 2006

Here's another one of my bitchfest about stuff which annoy the *** out of me in SSIS (and no such problems in DTS):

Do you ever wonder how easy it was to set up text file to db transform in DTS - I had no problems at all. In SSIS - 1 spent half a day trying to figure out how to get proper column data types for text file - OF Course MS was brilliant enough to add "Suggest Types" feature to text file connection manager - BUT guess what - it sample ONLY 1000 rows - so I tried to change that number to 50000 and clicked ok - BUT ms changed it to 1000 without me noticing it - SO NO WONDER later on some of datatypes did not match. And boy what a fun it is to change the source columns after you have created a few transforms.

This s**hit just breaks... So a word about Derived Columns - pretty useful feature heh? ITs not f***ing useful if it DELETES SOME of the Code itself after there have been changes in dataflow. I cant say how pissed off im about that SSIS went ahead and deleted columns from flow & messed up derived columns just because the lineageIDs dont match.

Meta-data - it would be useful if you could change it and refresh it - im just sick and tired of it that it shows warnings and errors when there's nothing wrong - so after a change i need to doubleclick all my transforms so that those red & yellow boxes would disappear.

Oh and y I passionately dislike Derived columns - so you create new fields based on some data - you do some stuff - combine multiple columns to one, but you have no way saying remove the columns from the pipeline. Y you need it - well if you have 50K + rows with 30+ columns then its EXTRA useless memory overhead for your package.

Hopefully one day I will understand how SSIS works (not an ez task I say) - I might be able to spend more time on development and less time on my bitchfest - UNTIL then --> Another Day - Another Hassle with SSIS

View 5 Replies View Related

T-SQL (SS2K8) :: Converting Row Values To Columns With Dynamic Columns

Jun 11, 2015

Basically, I'm given a daily schedule on two separate rows for shift 1 and shift 2 for the same employee, I'm trying to align both shifts in one row as shown below in 'My desired results' section.

Sample Data:

;WITH SampleData ([ColumnA], [ColumnB], [ColumnC], [ColumnD]) AS
(
SELECT 5060,'04/30/2015','05:30', '08:30'
UNION ALL SELECT 5060, '04/30/2015','13:30', '15:30'
UNION ALL SELECT 5060,'05/02/2015','05:30', '08:30'
UNION ALL SELECT 5060, '05/02/2015','13:30', '15:30'

[Code] ....

The results from the above are as follows:

columnAcolumnB SampleTitle1 SampleTitle2 SampleTitle3 SampleTitle4
506004/30/201505:30 NULL NULL NULL
506004/30/201513:30 15:30 NULL NULL
506005/02/201505:30 NULL NULL NULL
506005/02/201513:30 15:30 NULL NULL

My desired results with desired headers are as follows:

PERSONSTARTDATE STARTIME1 ENDTIME1 STARTTIME2 ENDTIME2
506004/30/2015 05:30 08:30 13:30 15:30
506005/02/2015 05:30 08:30 13:30 15:30

View 3 Replies View Related

Matching A View's Columns To It's Underlying Table's Columns

Jul 20, 2005

Hello,Using SQL Server 2000, I'm trying to put together a query that willtell me the following information about a view:The View NameThe names of the View's columnsThe names of the source tables used in the viewThe names of the columns that are used from the source tablesBorrowing code from the VIEW_COLUMN_USAGE view, I've got the codebelow, which gives me the View Name, Source Table Name, and SourceColumn Name. And I can easily enough get the View columns from thesyscolumns table. The problem is that I haven't figured out how tolink a source column name to a view column name. Any help would beappreciated.Garyselectv_obj.name as ViewName,t_obj.name as SourceTable,t_col.name as SourceColumnfromsysobjects t_obj,sysobjects v_obj,sysdepends dep,syscolumns t_colwherev_obj.xtype = 'V'and dep.id = v_obj.idand dep.depid = t_obj.idand t_obj.id = t_col.idand dep.depnumber = t_col.colidorder byv_obj.name,t_obj.name,t_col.name

View 2 Replies View Related

SELECT Query - Different Columns/Number Of Columns In Condition

Sep 10, 2007

I am working on a Statistical Reporting system where:


Data Repository: SQL Server 2005
Business Logic Tier: Views, User Defined Functions, Stored Procedures
Data Access Tier: Stored Procedures
Presentation Tier: Reporting ServicesThe end user will be able to slice & dice the data for the report by


different organizational hierarchies
different number of layers within a hierarchy
select a organization or select All of the organizations with the organizational hierarchy
combinations of selection criteria, where this selection criteria is independent of each other, and also differeBelow is an example of 2 Organizational Hierarchies:
Hierarchy 1


Country -> Work Group -> Project Team (Project Team within Work Group within Country)
Hierarchy 2


Client -> Contract -> Project (Project within Contract within Client)Based on 2 different Hierarchies from above - here are a couple of use cases:


Country = "USA", Work Group = "Network Infrastructure", Project Team = all teams
Country = "USA", Work Group = all work groups

Client = "Client A", Contract = "2007-2008 Maint", Project = "Accounts Payable Maintenance"
Client = "Client A", Contract = "2007-2008 Maint", Project = all
Client = "Client A", Contract = allI am totally stuck on:


How to implement the data interface (Stored Procs) to the Reports
Implement the business logic to handle the different hierarchies & different number of levelsI did get help earlier in this forum for how to handle a parameter having a specific value or NULL value (to select "all")
(WorkGroup = @argWorkGroup OR @argWorkGrop is NULL)

Any Ideas? Should I be doing this in SQL Statements or should I be looking to use Analysis Services.

Thanks for all your help!

View 1 Replies View Related

Identity Columns And Date Columns On Transactional Replication

Sep 16, 2006

Hi,

I am planning to use transacational replication (instead of merge replication) on my SQL server 2000. My application is already live and is being used by real users.

How can I ensure that replicated data on different server would have exact same values of identity columns and date columns (where every I set default date to getdate())?

It is very important for me to have a mirror image of data (without using clustering servers).

Any help would be appreciated.

Thanks,

-Niraj

View 1 Replies View Related

SQL Server 2014 :: Get SUM Of The Sum Of Three Columns And All Three Columns Have Nulls?

Jul 13, 2015

Basically I need to get the SUM of the sum of three columns and all three columns have nulls. To make it more complicated, the result set must return the top 20 in order desc as well.

I keep facing different issues whether I try and use Coalesce, IsNull, Sum, count, anything. My query never returns anything but 0 or NULL regardless of if I am trying to build a CTE or just use a query.

So I'm using Col A to get the TOP 20 in order (which is fine) but also trying to add together the sums of Col A + Col B + Col C for each of the twenty rows...

View 2 Replies View Related

Calculated Columns Based On Multiple Columns?

Aug 12, 2014

MS SQL 2008 R2

I have the following effectively random numbers in a table:

n1,n2,n3,n4,SCORE
1,2,5,9,i
5,20,22,25,i
6,10,12,20,i

I'd like to generate the calculated column SCORE based on various scenarios in the other columns. eg.

if n1<10 and n2<10 then i=i + 1
if n4-n3=1 then i=i + 1
if more than 2 consecutive numbers then i=i + 1

So, I need to build the score. I've tried the procedure below and it works as a pass or fail but is too limiting. I'd like something that increments the variable @test1.

declare @test1 int
set @test1=0
select top 10 n1,n2,n3,n4,n5,n6,
case when (
n1=2 and
n2>5
)
then @test1+1
else @test1
end as t2
from
allNumbers

View 5 Replies View Related

How To Select Columns When Columns Change

Aug 13, 2007

I have a scenario that reminds me of a pivot table and I am wondering if there is a way to handle this in SQL.

I have four tables. Product Line, Item, Property, and Value.

A Product Line has many items and an item can have many property's and a property can have many values.

I want to select a product line and show all the items with the Property's as column headers and the Values as the data. The thing I am having trouble with is the property's for an item are variable from a few to a whole bunch.

Any help would be appreciated.

Thanks,
vmon

View 2 Replies View Related

Identity Columns And XML Columns - OK With Mirroring ?

Feb 13, 2006

Just to confirm, do identity columns and XML columns work OK with database mirroring ? That is, all data types are supported with mirroring, and identities aren't an issue ?

Transactional replication with identity columns was a right pain in the **** in SQL 2000. I'm assuming that mirroring doesn't have these issues, but want to be sure.

View 1 Replies View Related

Looping Through Excel Columns (256 Columns)

Sep 19, 2007

Hello All,

I have a problem and i wish i can get the answers or advices to solve it.

i have like 20 excel files and in each file there is 1 sheet (Planning) . What i need to do is to loop on the on the 20 files (actually this is the easy part and i already done it) the hard part is while looping i need to open each excel file and loop on the 256 columns in it and extract the data from it to a SQL server Database.


Any help will be alot appreciated.

View 7 Replies View Related

External Columns Vs. Output Columns?

May 23, 2006

Can someone please explain the difference between Output and External columns? I can't fathom why "Output" columns aren't good enough. In other words, what is there a need or value in having two types of "output" columns?

TIA,



Barkingdong

View 5 Replies View Related

SQL 2012 :: Split Data From Two Columns In One Table Into Multiple Columns Of Result Table

Jul 22, 2015

So I have been trying to get mySQL query to work for a large database that I have. I have (lets say) two tables Table_One and Table_Two. Table_One has three columns: Type, Animal and TestID and Table_Two has 2 columns Test_Name and Test_ID. Example with values is below:

**TABLE_ONE**
Type Animal TestID
-----------------------------------------
Mammal Goat 1
Fish Cod 1
Bird Chicken 1
Reptile Snake 1
Bird Crow 2
Mammal Cow 2
Bird Ostrich 3

**Table_Two**
Test_name TestID
-------------------------
Test_1 1
Test_1 1
Test_1 1
Test_1 1
Test_2 2
Test_2 2
Test_3 3

In Table_One all types come under one column and the values of all Types (Mammal, Fish, Bird, Reptile) come under another column (Animals). Table_One and Two can be linked by Test_ID

I am trying to create a table such as shown below:

Test_Name Bird Reptile Mammal Fish
-----------------------------------------------------------------
Test_1 Chicken Snake Goat Cod
Test_2 Crow Cow
Test_3 Ostrich

This should be my final table. The approach I am currently using is to make multiple instances of Table_One and using joins to form this final table. So the column Bird, Reptile, Mammal and Fish all come from a different copy of Table_one.

For e.g

Select
Test_Name AS 'Test_Name',
Table_Bird.Animal AS 'Birds',
Table_Mammal.Animal AS 'Mammal',
Table_Reptile.Animal AS 'Reptile,
Table_Fish.Animal AS 'Fish'
From Table_One

[Code] .....

The problem with this query is it only works when all entries for Birds, Mammals, Reptiles and Fish have some value. If one field is empty as for Test_Two or Test_Three, it doesn't return that record. I used Or instead of And in the WHERE clause but that didn't work as well.

View 4 Replies View Related

SQL 2012 :: Calculated Columns Conditional On Calculated Columns Multiple Tables

Apr 20, 2014

I have 4 tables involved here. The priority table is TABLE1:

NAMEID TRANDATE TRANAMT RMPROPID TOTBAL
000001235 04/14/2014 335 A0A00 605
000001234 04/14/2014 243 A0A01 243
000001236 04/14/2014 425 A0A02 500

TRANAMT being the amount paid & TOTBAL being the balance due per the NAMEID & RMPROPID specified.The other table includes a breakdown of the total balance, in a manner of speaking, by charge code (thru a SUM(OPENAMT) query of DISTINCT CHGCODE

TABLE2
NAMEID TRANDATE TRANAMT RMPROPID CHGCODE OPENAMT
000001234 04/01/2014 400 A0A01 ARC 0
000001234 04/05/2014 -142 A0A01 ARC 228
000001234 04/10/2014 15 A0A01 ALT 15

[code]...

Also with a remaining balance (per CHGCODE) column. Any alternative solution that would effectively split the TABLE1.TRANAMT up into the respective TABLE2.CHGCODE balances? Either way, I can't figure out how to word the queries.

View 0 Replies View Related

Adding Columns To A Matrix Report That Don't Belong To The Matrix Columns Groups

Jan 2, 2007

Can we do this?



Adding more columns in a matrix report that don€™t
belong to the columns drilldown dimensions€¦



That is, for example, having the following report:

Product Family


Product

Country City Number of units sold





Then I
would add some ratios, that is, Units Sold/Months (sold per month) and other that
is the average for Product Family (Units Sold/Number of Product Family), for putting an example€¦ some
columns should be precalculated prior to the report so do not get into it, the
real problem I don€™t see how to solve is adding one or two columns for showing
these calculated column that doesn€™t depend on the column groups but they do
for the rows groups€¦




Any guidance
on that?


The only
way I am seeing by now is to set it as two different reports, and that is not
what my client wants€¦






Many
thanks,
Jose

View 4 Replies View Related

Dumping Rows Of 2 Columns Of A Table To A Different Table With Different No Of Columns

Sep 19, 2007



Hi,

I have two tables

Table Source
{

category varchar(20),
LastUpdate datetime
}



Table Destination
{


SubjectId varchar(20),
SubjectDate datetime,
category varchar(20),
LastUpdate datetime
}

Please note that the number columns are different in each table.
I wanted to dump the data of Source table to Destination table. I meant to say that the rows of 2 columns in Source table to last 2 rows of Destination table.
And also my oreder of the columns in Destination table will vary. So i need to a way to dynamically insert the data in bulk. but i will know the column names for sure before inserting.

Is there anyway to bulk insert into these columns.


Your quick response will be appreciated

~Mohan Babu

View 2 Replies View Related

Problem Restoring Database With Encrypted Columns To Different Database Or Server With Encrypted Columns.

Jan 23, 2006

I need to start encrypting several fields in a database and have been doing some testing with a test database first. I've run into problems when attempting to restore the database on either the same server (but different database) or to a separate server.

First, here's how i created the symmetric key and encrypted data in the original database:

create master key
encryption by password = 'testAppleA3';

create certificate test
with subject = 'test certificate',
EXPIRY_DATE = '1/1/2010';

create symmetric key sk_Test
with algorithm = triple_des
encryption by certificate test;

open symmetric key sk_Test decryption by certificate test;

insert into employees values (101,'Jane Doe',encryptbykey(key_guid('sk_Test'),'$200000'));
insert into employees values(102,'Bob Jones',encryptbykey(key_guid('sk_Test'),'$500000'));

select * from employees
--delete from employees
select id,name,cast(decryptbykey(salary) as varchar(10)) as salary from employees

close all symmetric keys

Next I backup up this test database and restore it to a new database on a different server (same issue if restore to different database but on same server).

Then if i attempt to open the key in the new database and decrypt:

open symmetric key sk_Test decryption by certificate test;

I get the error: An error occurred during decryption.

Ok, well not unexpected, so reading the forums, i try doing the below first in the new database:

ALTER MASTER KEY ADD ENCRYPTION BY SERVICE MASTER KEY

Then I try opening the key again and get the error again:

An error occurred during decryption.

So then it occurs to me, maybe i need to drop and recreate it so i do

drop symmetric key sk_test

then

create symmetric key sk_Test
with algorithm = triple_des
encryption by certificate test;

and then try to open it.

Same error!

So then i decide, let's drop everything, the master key, the certificate and then symmetric key:

drop symmetric key sk_test
drop certificate test
drop master key

Then recreate the master key:

create master key
encryption by password = 'testAppleA3';

Restore the certificate from a backup i had made to a file:

CREATE CERTIFICATE test
FROM FILE = 'c:storedcertsencryptiontestcert'

Recreate the symmetric key again:

create symmetric key sk_Test
with algorithm = triple_des
encryption by certificate test;

And now open the key only to get the error:

Cannot decrypt or encrypt using the specified certificate, either because it has no private key or because the password provided for the private key is incorrect.

So what am I doing wrong here? In this scenario I would appear to have lost all access to decrypt the data in the database despite restoring from a backup which restored the symmetric key and certificate and i obviously know the password for the master key.

I also tried running the command

ALTER MASTER KEY ADD ENCRYPTION BY SERVICE MASTER KEY

again but this does not resolve the issue.



Thx.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved