SQL Configuration Holding Connections To DS
May 27, 2006
Hello All,
I have about 160 packages in my system, all using about 20 shared datasources.
When changing one of the datasource's connection (changing the server name), I need to open every one of my packages and press OK to allow the remapping to the new server. (this is something I don't understand: wasn't this the meaning of using a share datasource in the first place? what's the advantages in that case?)
So, I have heard about Package configuration, and how it supposed to support all of this, But I don't understand something: The configuration is set to a certain package. If I have 2 packages, using the same two (of four) Datasources. Using the configuration wizard from one of the packages, I mark the connection string from the datasource. I need to do the same in the other package? will the configuration table hold only one value for that connection? If I change the value of the connection string will it affect all the packages using that datasource or only the ones using configuration?
Thanks,
Liran
View 10 Replies
ADVERTISEMENT
Dec 7, 2006
If I look under SQL native client configuration | Client protocols, I have no entries and no ability to look at the properties of SQL Native client Configuration. Something is missing which I think is related to an error when connecting to my local server.
sqlcmd -E -S .devmain, 1064
I get error :
Encryption not support
sqlcmd: Error: microsoft SQL native Client : Client unable to establish connection
An error has occurred while establish a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections..
In comparison to other machines here at work, it appears my remote connections are configured. But I have no Client Protocols under sql native client configuration, how can I get them in there?
Thanks, in advance.
View 5 Replies
View Related
Mar 7, 2008
Hi all,
I have a package that does simple exporting from an excel sheet to a table.
I used a Dataflow task with Excel Source and OLEDB Destination Components.
And i created Package configurations for Source and Destination Components.
After than when i execute the package i get the following error.
Information: 0x40016041 at ProductDetails_Import: The package is attempting to configure from the XML file "D:TEST_ETLLPL_Config2.dtsConfig".
Information: 0x40016041 at ProductDetails_Import: The package is attempting to configure from the XML file "D:TEST_ETLDBCon2.dtsConfig".
SSIS package "ProductDetails_Import.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Error: 0xC0202009 at ProductDetails_Import, Connection manager "Excel Connection Manager": SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
Error: 0xC020801C at Data Flow Task, Excel Source [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error: 0xC0047017 at Data Flow Task, DTS.Pipeline: component "Excel Source" (1) failed validation and returned error code 0xC020801C.
Error: 0xC004700C at Data Flow Task, DTS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at Data Flow Task: There were errors during task validation.
SSIS package "ProductDetails_Import.dtsx" finished: Failure.
The program '[2416] ProductDetails_Import.dtsx: DTS' has exited with code 0 (0x0).
I have been trying to troubleshoot the error message given below from last evening.
I have been trying to troubleshoot the error from last morning.
Counld not figure out what is causing this error to occur.
Please help!!!!
Any pointersSuggestions would be highly appreciated.
Thanks & Regards
View 3 Replies
View Related
Oct 7, 2007
Hi -
Is there a resource I can go to that lists people who I pay to talk me through stuff like getting SQL Server Express installed, get some sample data input and then get that data into Excel? I just cannot seem to get any help that works for me to learn SQL Server; the books are obtuse, the online help too indirect. Once I get something working I hope to enhance it on my own, but I have been stuck at the start for a very long time. There is stuff for me to do that is not getting done.
Doug
View 1 Replies
View Related
Feb 8, 2007
I already posted this question in the Wrong Forum.
However I was wondering if it is possible to create a variable that holds the filename as an expression. I am using a For each loop to pick up files and i want to insert the 'Filename' as a colum so that i can differentiate among the rows in my destination Table.
Using the 'Derived Colum' in DTS I can link the colum to the variable. However i do not know how to create the variable which will store the filename for each file....
Any Clues...
Would really appreciate the help.....
View 2 Replies
View Related
Dec 7, 2005
this querry below works perfect when i assign the us.UserID = 29 but i need to be able to use the @UsersMaxID variable..... when i debug all of my values are right where they need to be... even this on ((( @UsersMaxID ))) but for some reason it will not work with the next select statement...
can someone make the pain go away and help me here..??
erik..
GOSET ANSI_NULLS ON GO
ALTER PROCEDURE AA
ASDECLARE @GenericColumn Varchar (200) DECLARE @GenericValue Varchar (200)
SET @GenericColumn = 'FirstName'SET @GenericValue = 'Erik'
DECLARE @SQL NVARCHAR(4000) DECLARE @UserID INT DECLARE @UsersMaxID INT DECLARE @MaxID INT
declare @tempResult varchar (1000)
-------------------------------------------Define the #Temporary Table----------------------------------------------CREATE TABLE #UsersTempTable ( ID int IDENTITY PRIMARY KEY,
UserID [int], FirstName [varchar](30), LastName [varchar](30), CompanyName [varchar](200), Address1 [varchar](75), Address2 [varchar](75), City [varchar](75),ActiveInd [int], Zip [varchar](10), WkPhone [varchar](12),HmPhone [varchar](12), Fax [varchar](12), Email [varchar](200), Website [varchar](200), UserType [varchar](20),Title [varchar](100),Note [text], StateCD [char](2), CountryCD [char](2), CompanyPhoto [varchar](50), CompanyDescr [varchar](2000)) ---------------------------------------Fill the temp table with the Customers data-----------------------------------SET @SQL = 'INSERT INTO #UsersTempTable (UserID, FirstName, LastName, CompanyName, Address1, Address2, City, ActiveInd, Zip, WkPhone, HmPhone,Fax, Email, Website, UserType, Title, Note, StateCD, CountryCD, CompanyPhoto, CompanyDescr)
Select Users.UserID, Users.FirstName,Users.LastName, Users.CompanyName, Users.Address1, Users.Address2, Users.City, Users.ActiveInd, Users.Zip, Users.WkPhone, Users.HmPhone,Users.Fax,Users.Email,Users.Website, Users.UserType,Users.Title, Users.Note,Users.StateCD, Users.CountryCD,Users.CompanyPhoto,Users.CompanyDescr
FROM USERS
WHERE ' + @GenericColumn +' = ''' + @GenericValue + ''''
EXEC sp_executesql @SQL
SET @MaxID = (SELECT MAX(ID) FROM #UsersTempTable)SET @UsersMaxID = (SELECT UserID From #UsersTempTable WHERE ID = @MaxID)
SELECT SpecialtyName FROM Specialty s INNER JOIN UserSpecialty us ON s.SpecialtyCD = us.SpecialtyCD WHERE us.UserID = 29
SELECT * FROM #UsersTempTable
==========================================================================================SET @UsersMaxID = (SELECT UserID From #UsersTempTable WHERE ID = @MaxID)
SELECT SpecialtyName FROM Specialty s INNER JOIN UserSpecialty us ON s.SpecialtyCD = us.SpecialtyCD WHERE us.UserID = 29 <<<<<<<<<<<<<<<<< i need @UserMaxID ........RIGHT HERE
View 1 Replies
View Related
Apr 8, 2014
I am connecting to a new SQL Server 2008 R2 database using SSMS from my ADMIN VM workstation. I bring up a Stored Procedure and make a change.... I execute the Stored Procedure... after it finishes.... I exit out without saving to a file.... I go back in and my change was not held.
I can do the exact same process with an old SQL Server 2005 database. Is there a permission I am missing to set to be able to do this on the 2008 database.
View 9 Replies
View Related
Apr 25, 2008
I have this query that returns the largest value in a row, but i need to know the column name that this value is in as well. any help in advance is appreciated
select clientID,
(select max(incomeValue)
from
(select earnings as incomeValue
union all
select unemployment
union all
select pensionRetirement
union all
select alimony
union all
select childSupport
union all
select dividendInterest
union all
select SS
union all
select SSI
union all
select SSDI
union all
select veteranBenefits
union all
select FIP
union all
select workStudy
union all
select other
union all
select otherHHWS) as income) as MaxIncomeValue
from tbl_income
View 12 Replies
View Related
Jun 23, 2007
I don't know where to post this kind of stuff so here goes...
I have maintenance plans which sometimes fail because the delete step reports that the old backup file is "in use." I have no idea how to determine what Windows thinks is holding the file. HOw do you determine who is holding a file hostage??
Thanks.
View 3 Replies
View Related
Feb 25, 1999
Warning: Process Being Freed While Holding Dataserver Semaphore
I understand that this is a bug. And that it is supposed to be fixed in
service pack 4.
However, has anyone experienced or figured out how to get rid of this message?
Thanks for your help.
View 1 Replies
View Related
Jul 20, 2002
Here's a quick script that will return the inputbuffer of processes that are holding more than a certain threshold of locks (by default, 10, but it's easy to modify). Handy for tracking down what query is holding those 1400 locks.
Yes, it uses a cursor. I'd welcome amendment by anyone who has the insight on converting it to pure set-based.
Cheers
-b
CREATE PROCEDURE sp_lock4 AS
set nocount on
DECLARE @tSpids table(spid int PRIMARY KEY CLUSTERED,count int)
DECLARE @iSpid int,@iCount int
insert into @tSpids (spid,count)
select convert (smallint, req_spid) As spid,
count(*) as count
from master.dbo.syslockinfo,
master.dbo.spt_values v,
master.dbo.spt_values x,
master.dbo.spt_values u
where master.dbo.syslockinfo.rsc_type = v.number
and v.type = 'LR'
and master.dbo.syslockinfo.req_status = x.number
and x.type = 'LS'
and master.dbo.syslockinfo.req_mode + 1 = u.number
and u.type = 'L'
group by converT(smallint,req_spid),'dbcc inputbuffer(' + cast(req_spid as varchar(4)) + ')'
having count(*)>10
order by count(*) desc
DECLARE cLoop cursor for
select spid,count from @tSpids
OPEN cLoop
FETCH NEXT FROM cLoop INTO @iSpid,@iCount
WHILE @@FETCH_STATUS=0
BEGIN
select 'spid ' + cast(@iSpid as varchar(4)) + ' has ' + cast(@iCount as varchar(5)) + ' locks.'
exec ("dbcc inputbuffer (" + @ispid + ")")
FETCH NEXT FROM cLoop INTO @iSpid,@iCount
END
CLOSE cLoop
DEALLOCATE cLoop
return (0) -- sp_lock
GO
View 1 Replies
View Related
Oct 1, 2007
I've done some basic database design in the past, but am a relative newbie to design. I have recently come across a situation I'm not sure how to handle. Here's the situation...
Assume we've got a contacts table which holds information about our contacts. All contacts have the same basic information - name, address, telephone, etc. Each contact is of a certain type - let's just say a, b, and c, for ease. This contact type is stored in the contacts table. Now, on contacts of type b, I also have to store some additional data. What it is doesn't really matter. I found a way to set this up, but I'm not sure that I'm going about it the right way, and would love some advice on the proper way to do this. Basically, what I did is create my contacts table:
Contact_id, contactName, ContactAddress, ContactPhone, ContactType.
Created a contacttype table
ContactType, ContactTypeDescription, ContactAddInfo
What I've done is left contactaddInfo as a nullable field. When it has a value, that value is the name of a table which holds the additional information that I need for the contact... So when I'm running a query, I can tell if I need to reference another table by checking the value of ContactAddInfo.
I can't imagine that this is the best solution, but it was the first thing that popped into my head, and it's a really small database that's using it. However, I'm now being faced with the same situation in a much more important, larger database, and I'd love to know the 'right' way.
Thanks for any guidance you can provide!
Erin
View 4 Replies
View Related
May 13, 2015
is there any more efficient way for example to implement the next query?
SELECT s1.article, dealer, s1.price
FROM shop s1
JOIN (
SELECT article, MAX(price) AS price
FROM shop
GROUP BY article) AS s2
ON s1.article = s2.article AND s1.price = s2.price;
WHERE dealer = 'dealer sample'
What indexes I should create for this query?
View 2 Replies
View Related
Jun 19, 2015
I'm working on an application that allows users to set up scheduled time based reports. Each scheduled report creates a SQL Agent job associated with a schedule.The default time to fire these off is 8:00 AM. There are several hundred. DWH and it has no trouble running hundreds of reports all fired off at the same time.
There are several ETL processes and occasionally they don't complete before our verbal SLA of 8:00 AM.
My problem is on days where the ETL runs past 8:00 AM I wan't to hold these scheduled jobs from firing off.
View 4 Replies
View Related
Sep 22, 2007
I am getting following error when trying to install SQL express 2005 on XPSP2.
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
The SQL Server System Configuration Checker cannot be executed due to WMI configuration on the machine SIGMA-805539A79 Error:2147944122 (0x800706ba).
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=setup.rll&EvtID=70342
I tied re-installing WMI using http://blogs.msdn.com/jpapiez/archive/2004/12/09/279041.aspx link but could not get it working.
Do i need IIS installed? Its not installed on this box...
please suggest something... i am stuck...
Thanks,
View 3 Replies
View Related
May 2, 2007
I have just finished installing SQL 2005 Ent Edition on Win 2000 Adv Server, SQL2005 SP2, and SP2 Hotfix KB934458. After the installation, I could see and configure all services via SQL Configuration Manager and SQL Server Surface Area Configuration tools. This worked for a couple of days and now both configuration tools no longer detect SQL2005 components. SQL Server Surface Area Configuration issued an error that said "No SQL Server 2005 components were found on specified computer. Either no components are installed, or you are not an administrator on this computer. (SQLAC)". SQL Configuration Manager did not list any installed services. I don€™t know what caused this. Anyone has any idea? Please help! Below is the Installation Report which shows installed components.
===================================
The following components are installed on this server
DEV
Analysis Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Database Engine
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Reporting Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
QA
Analysis Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Database Engine
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Common components
Integration Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Notification Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Workstation Components
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
===================================
View 1 Replies
View Related
May 23, 2006
Hi --I was wondering if this is a bug when I add new data in my table SSIS Confiurations and give wizard a new Configuration filter the package configuration wizard can not see the new values --the old values from the previous configuration are still showing---is there any known workaround or forced refresh I can do
thanks in advance Dave
Background:
SQL Package Configurations are most important because they provide the possibility of a central configuration store for your entire enterprise!!!!!!!! and is in my mind the only way to go
http://sqljunkies.com/WebLog/knight_reign/archive/2005/01/24/6843.aspx
Wizard results:
Name:
ETL
Type:
SQL Server
Connection name:
ETLConfiguration
Any existing configuration information for selected configuration filter will be overwritten with new configuration settings.
Configuration table name:
[dbo].[SSIS Configurations]
Configuration filter:
PT_CUST_ABR
Target Property:
Package.Variables[User::gsPreLoad].Properties[Value]
Package.Variables[User::gsPostLoad].Properties[Value]
Package.Variables[User::gsLoad].Properties[Value]
Package.Variables[User::gsFlatFilename].Properties[Value]
Package.Variables[User::gsFileName].Properties[Value]
Package.Variables[User::gsCDOMailTo].Properties[Value]
Package.Variables[User::gsCDOMailSubject].Properties[Value]
Package.Variables[User::giRecordCount].Properties[Value]
Package.Variables[User::giFileSize].Properties[Value]
Package.Variables[User::giBatchID].Properties[Value]
Package.Variables[User::gdFileDateCreated].Properties[Value]
Package.Connections[MyDatabase].Properties[ServerName]
Package.Connections[MyDatabase].Properties[InitialCatalog]
USE [ETLConfiguration]
GO
/****** Object: Table [dbo].[SSIS Configurations] Script Date: 05/23/2006 13:34:35 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[SSIS Configurations](
[ConfigurationFilter] [nvarchar](255) COLLATE Latin1_General_CI_AS NOT NULL,
[ConfiguredValue] [nvarchar](255) COLLATE Latin1_General_CI_AS NULL,
[PackagePath] [nvarchar](255) COLLATE Latin1_General_CI_AS NOT NULL,
[ConfiguredValueType] [nvarchar](20) COLLATE Latin1_General_CI_AS NOT NULL
) ON [PRIMARY]
View 3 Replies
View Related
Aug 16, 2007
Here is my code
ALTER PROCEDURE Test
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
DECLARE @From varchar(10)
DECLARE @To varchar(10)
DECLARE @DBName varchar
SELECT TOP 1 @From = CONVERT(char,CreateDate,101) FROM CustomerInfo
WHERE TicketNum =
(SELECT TOP 1 TicketNum FROM CustomerInfo
WHERE CreateDate <= DATEADD(mm, -30, CURRENT_TIMESTAMP)
ORDER BY CreateDate DESC)
SELECT @To = CONVERT(char,GETDATE(),101)
SET @DBName = 'Archive_SafeHelp'
CREATE DATABASE @DBName + ' ' + @From + ' ' + @To
END
I am trying to create a database based on the name contained in the variables. I get the error 'Incorrect syntax near '@DBName'. How do i accomplish this?
Thanks
Ganesh
View 2 Replies
View Related
May 17, 2005
Hi there,
Here we have got a
asp.net application that was developed when database was
sitting on SQL server 6.5. Now client has moved all of their databases
to SQL server 2000. When the database was on 6.5 the previous
development team has used oledb connections all over. As the databases
have been moved to SQL server 2000 now i am in process of changing the
database connection part. As part of the process i have a login
authorization code.
Private Function Authenticate(ByVal username As String, ByVal password As String, ByRef results As NorisSetupLib.AuthorizationResult) As Boolean
Dim conn As IDbConnection = GetConnection()
Try
Dim cmd As IDbCommand = conn.CreateCommand()
Dim sql As String = "EDSConfirmUpdate" '"EDSConfirmUpdate""PswdConfirmation"
'Dim cmd As SqlCommand = New SqlCommand("sql", conn)
cmd.CommandText = sql
cmd.CommandType = CommandType.StoredProcedure
NorisHelpers.DBHelpers.AddParam(cmd, "@logon", username)
NorisHelpers.DBHelpers.AddParam(cmd, "@password", password)
conn.Open()
'Get string for return values
Dim ReturnValue As String = cmd.ExecuteScalar.ToString
'Split string into array
Dim Values() As String = ReturnValue.Split(";~".ToCharArray)
'If the return code is CONTINUE, all is well. Otherwise, collect the
'reason why the result failed and let the user know
If Values(0) = "CONTINUE" Then
Return True
Else
results.Result = Values(0)
'Make sure there is a message being returned
If Values.Length > 1 Then
results.Message = Values(2)
End If
Return False
End If
Catch ex As Exception
Throw ex
Finally
If (Not conn Is Nothing AndAlso conn.State = ConnectionState.Open) Then
conn.Close()
End If
End Try
End Function
''' -----------------------------------------------------------------------------
''' <summary>
''' Getting the Connection from the config file
''' </summary>
''' <returns>A connection object</returns>
''' <remarks>
''' This is the same for all of the data classes.
''' Reads a specific
connection string from the web.config file for the service, creates a
connection object and returns it as an IDbConnection.
''' </remarks>
''' -----------------------------------------------------------------------------
Private Function GetConnection() As IDbConnection
'Dim conn As IDbConnection = New System.Data.OleDb.OleDbConnection
Dim conn As IDbConnection = New System.Data.SqlClient.SqlConnection
conn.ConnectionString = NorisHelpers.DBHelpers.GetConnectionString(NorisHelpers.DBHelpers.COMMON)
Return conn
End Function
in the above GetConnection() method i
have commented out the .net dataprovider for oledb and changed it to
.net dataprovider for SQLconnection. this function works fine. But in
the authenticate method above at the line
Dim ReturnValue As String = cmd.ExecuteScalar.ToString
for some reason its throwing the below error.
Run-time exception thrown : System.Data.SqlClient.SqlException - @password is not a parameter for procedure EDSConfirmUpdate.
If i comment out the
Dim conn As IDbConnection = New System.Data.SqlClient.SqlConnection
and uncomment the .net oledb provider,
Dim conn As IDbConnection = New System.Data.OleDb.OleDbConnection
then it works fine.
I also have changed the webconfig file as below.
<!--<add
key="Common" value='User ID=**secret**;pwd=**secret**;Data
Source="ESMALLDB2K";Initial Catalog=cj_common;Auto
Translate=True;Persist Security Info=False;Provider="SQLOLEDB.1";'
/>-->
<add key="Common" value='User ID=**secret**;pwd=**secret**;Data Source="ESMALLDB2K";Initial Catalog=cj_common;' />
Please help. Thanks in advance.
View 4 Replies
View Related
Jan 14, 2006
It seems to me, that the best way is to have one Environment Varible containing the name of the SQL Server, so that you can look up the configuration in the SSIS Configuration Table when you run the package.
Is this the preferable way of doing it ? I would like to hear some positive/negative comment of why chosing a configuration type instead of another.
It seems to me that putting all of the configuration in the Environment variable is harder work but most secure (server breakdown vs table corruption/database error...)
Let's have some comments
View 3 Replies
View Related
Jul 20, 2005
Just a quick question about connection management. My application willnever need more than 1 or 2 connections about at any given time. Also, I donot expect many users to be connected at any given time. For efficiency, Iwould like to keep connections alive throughout the lifetime of the objectsrequiring them, rather than opening a new connection, executing code andthen closing it again. What is the most efficient way of doing this?Should I perform the open/close or just one open when I create the objectand a close when I dispose of it?
View 1 Replies
View Related
Mar 6, 2006
Hi Guys,
Here's the current scenario:
I am creating a windows application to manage my ssis packages.
My SSIS packages use package configurations, and by default connect to the "SSIS Configurations" table in sql server.
However, I want it to connect to a view instead of this table, so i create a view "vwSSIS_Configurations" and point the package configuration to use the view in sql server.
The application SHOULD be capable of altering the package configuration's configuration and switch its connection between the default "ssis configurations" table, and the view.
Is this possible? I cannot think of a way which I can have my application switch the package configuration's connection.
Thanks,
kervy
View 3 Replies
View Related
Dec 27, 2007
Hi I have some simple questions of for MS SQL. Say I have a database with a table Called Company. In this table I have Employee's with these columns(EmployeeID<PK>, FirstName, LastName) Now I am inserting some data like this.EmployeeID FirstName, LastName------------------------------------------------------- 1 Bob Smith2 Joe Mitter Now Say I have this situation(this will look weird for this example but for another examples and the stuff I am working on it make sense). Say I have a new Employee Called Jessica White. Jessica must be the second record. So I need to insert it between the 1st and 2nd record. Like I said I am very noob at doing this stuff so I am not sure how I would do it. I first was going to my table and then went to modify. This brought up a blank grid with all my column names. I then started to add all my data in. I found out later to make my life easier I need to enter in certain spots null rows in it to help with formating(otherwise I would have had to figure out a way to do make null rows with c# code). I then went back to this grid and I tried to add a record before the data just like you if you used excel. I quickly found out you can not do that. This resulted me having to recreate the table and reput the all the data back in(this told me I was doing something very very wrong). I was then thinking of writing it with a query and I been playing around with it and still running into problems like say I had a table called test with a coloum called id<PK> and testss(yes bad names just playing around though).So if I did something like this:INSERT INTO testVALUES(2)INSERT INTO testVALUES(1)SELECT * FROM testNow I am trying to figure out how to insert something between rows 1 and 2. Would I have to drop the table or delete all the data and then run a saved copy of my script with the added change or what?My second question is what is a good site that has examples of all the commands(I don't want to read a book on it I have had a oracle sql course and well it was just boring and I did not learn too much.). I think the best way for me to learn is just continue doing my site and picking it up on the file and when I got a problem read about it and ask on the forums. Thanks
View 11 Replies
View Related
Jul 13, 2001
Very strange event. Installed new machine into NT 4 network, which has a PDC and a BDC. We have copies of all SQL databases on both the PDC and the BDC. I installed SQL 7 on new workstation. Throught Control Panel/ODBC connections I can reach the SQL files on bith the PDC and BDC. Howver when I try to use Enterprise Manager, I can connect to the tables on the PDC, but not the BDC. SQL lists both machines in the server group, but only allows me to access tables on PDC! Here is the Event information that I recived on the BDC:
The computer IVR1 tried to connect to the server NTBACKUPSERVER using the trust relationship established by the MASSCOM domain. However, the computer lost the correct security identifier (SID) when the domain was reconfigured.
How do I fix this?
View 2 Replies
View Related
Apr 14, 2000
HI all,
I have a problem here. I am having two computers both are loaded windows NT 4.0 AND SERVICE PACK 4 AND ALSO I INSTALLED SQL SERVER 7.0.
Now i want to connect those two servers , so pls anyone suggest me how i have to do.I connected both servers thru HUB.
Pls suggest me..
thank u..
--ram
View 1 Replies
View Related
Oct 9, 1998
I figure anyone who has done VB and SQL Server might have run into this.
>
> I am set up as a DBO on SQL Server with access to db1 and db2. My default
> is set to db2. From my local machine, I can log through VB(DSN-less) in
> to
> either one without a problem. BUT, if I go to another machine and try to
> log in through VB(DSN-less) to db1, it rejects my login. Here is my
> connect
> string :
>
> UID=xxxxxxx;PWD=pedro;DATABASE=db2;DRIVER={SQL
> Server};SERVER=Athens;DSN=``;
>
> The only thing that changes when I log into db1 is the database parameter-
> "DATABASE=db1".
>
> Am I doing something wrong here? Is there something that needs to be
> setup
> differently in SQL Server? Do I need to put something else into the
> connect
> string?
>
> This happens for the other developers as well, not just me.
>
> Any help would be GREATLY appreciated.
View 2 Replies
View Related
Apr 12, 2001
I am looking for some ideas on the following DTS challenge: I need to import the data from an Access 97 database into a set of tables(about 25). The location of the database can be anywhere on the users drive(s) and I will need to get the location of the database from a registry setting and use it to define the connection.
Thanks
View 1 Replies
View Related
Jun 11, 2004
We have a case where a user is using Excel sheet to connect the database on SQL2K and generally his connection runs in the upper 150 in numbers. He generally gets more than 150 connections open.
I know that it's not a good thing, but is there a way to limit it or even kill it after it reaches max?
What are the disadvantages of opening too many connections?
View 1 Replies
View Related
Sep 7, 2006
I'm getting the classic message "The timeout period elapsed prior to obtaining a connection from the pool" etc when connecting to my SQL Server 2005 Express from a .Net application.
Then I try connecting, simultaneously, from a simple ASP.net thing I wrote just for testing and this works fine. So, then the connection pool can't be full, can it? Or, does each application have its own pool??
View 6 Replies
View Related
Apr 16, 2004
Ok, yeah, I'm being lazy...
Any comments?
View 8 Replies
View Related
Feb 9, 2006
Hi
I have heard that SQL Server can support upto 10,000 users,
What if my application , connects to the sql & does not do antything then , why does the SQL server slow down with just 700 users.
I mean just the connection is established & NOTHING further is done.
Thanks
View 6 Replies
View Related
Nov 29, 2007
hi,
have been looking for ages for somewhere that might be able to answer my question so thought i'd try here.
anyhows, my place of work have goldmine 6.7 running on a server. the problem is that some of the client machines seem to be taking 2 connections to the server when logged into goldmine and some only 1.
when looking at the open sessions it shows a second for some users accessing pipesqlquery. all users show this but only some show it as a second connection.
please any ideas
View 5 Replies
View Related
Dec 21, 2007
Is there any type of performance gain to using DSN connections? Or any real advantage to using them over DSN-Less connections?
--
If I get used to envying others...
Those things about my self I pride will slowly fade away.
-Stellvia
View 5 Replies
View Related
