SQL Connection - Named Pipes Error
Dec 27, 2006
Hi all,
I've got a little problem.
I'm working on a ASP.NET project. The applications has 4-layers. When I look in the Data Access Layer and test the typed dataset, then the "Preview Data" works fine. I see the right records from SQL Server 2005.
But when I run the app (default.aspx) in debug-mode, then the system gives the following error:
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)"
Please help.....
View 9 Replies
ADVERTISEMENT
Jun 9, 2008
I get this error when I try and log into my SQL Server 2005 database:
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)" Does any one have solutions please reply. thanks & regards Priya.
View 1 Replies
View Related
Dec 5, 2007
Hello All!
I'm getting the following error message below from SQL server error log, see below.
And the following error on the web browers:
"System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) "
I have see this link (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=192622&SiteID=1) and other links and done the changes they recommend, but it does not give any positive results.
I have also in the firewall added named pipes internal and external port 445.
I have also in RUN executed "cliconfg.exe" and enable the tcp ip port number 1433 and named pipes "sqlquery".
In the sql server configuration manager, have I enabled both tcp/ip and named pipes. The same in the server surface area configuration. I have also enabled remote access.
Still having the same problem??!!??
Iam out of ideas ...
Please need help, thanks in forehand!
Nikita
SQL SERVER LOG file:
2007-12-05 11:31:11.12 Server Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86)
Feb 9 2007 22:47:07
Copyright (c) 1988-2005 Microsoft Corporation
Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
2007-12-05 11:31:11.12 Server Error: 17054, Severity: 16, State: 1.
2007-12-05 11:31:11.12 Server The current event was not reported to the Windows Events log. Operating system error = 1502(error not found). You may need to clear the Windows Events log if it is full.
2007-12-05 11:31:11.12 Server (c) 2005 Microsoft Corporation.
2007-12-05 11:31:11.12 Server All rights reserved.
2007-12-05 11:31:11.12 Server Server process ID is 1744.
2007-12-05 11:31:11.12 Server Authentication mode is MIXED.
2007-12-05 11:31:11.12 Server Logging SQL Server messages in file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.
2007-12-05 11:31:11.12 Server This instance of SQL Server last reported using a process ID of 4884 at 5.12.2007 11:30:09 (local) 5.12.2007 9:30:09 (UTC). This is an informational message only; no user action is required.
2007-12-05 11:31:11.12 Server Registry startup parameters:
2007-12-05 11:31:11.12 Server -d C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf
2007-12-05 11:31:11.12 Server -e C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG
2007-12-05 11:31:11.12 Server -l C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf
2007-12-05 11:31:11.20 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2007-12-05 11:31:11.20 Server Detected 2 CPUs. This is an informational message; no user action is required.
2007-12-05 11:31:11.67 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2007-12-05 11:31:11.75 Server Database mirroring has been enabled on this instance of SQL Server.
2007-12-05 11:31:11.75 spid4s Starting up database 'master'.
2007-12-05 11:31:11.93 spid4s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2007-12-05 11:31:12.11 spid4s SQL Trace ID 1 was started by login "sa".
2007-12-05 11:31:12.20 spid4s Starting up database 'mssqlsystemresource'.
2007-12-05 11:31:12.23 spid4s The resource database build version is 9.00.3042. This is an informational message only. No user action is required.
2007-12-05 11:31:12.49 spid8s Starting up database 'model'.
2007-12-05 11:31:12.49 spid4s Server name is 'ESPMK60134SQLEXPRESS'. This is an informational message only. No user action is required.
2007-12-05 11:31:12.51 spid4s Starting up database 'msdb'.
2007-12-05 11:31:12.65 spid8s Clearing tempdb database.
2007-12-05 11:31:13.03 Server A self-generated certificate was successfully loaded for encryption.
2007-12-05 11:31:13.03 Server Server is listening on [ 'any' <ipv4> 1175].
2007-12-05 11:31:13.03 Server Server named pipe provider is ready to accept connection on [ \.pipeMSSQL$SQLEXPRESSsqlquery ].
2007-12-05 11:31:13.03 Server Dedicated administrator connection support was not started because it is not available on this edition of SQL Server. This is an informational message only. No user action is required.
2007-12-05 11:31:13.07 Server SQL Server is now ready for client connections. This is an informational message; no user action is required.
2007-12-05 11:31:13.32 spid8s Starting up database 'tempdb'.
2007-12-05 11:31:13.42 spid4s Recovery is complete. This is an informational message only. No user action is required.
2007-12-05 11:31:13.42 spid11s The Service Broker protocol transport is disabled or not configured.
2007-12-05 11:31:13.42 spid11s The Database Mirroring protocol transport is disabled or not configured.
2007-12-05 11:31:13.46 spid11s Service Broker manager has started.
View 3 Replies
View Related
Jan 6, 2006
This was originally posted in the SSIS Forum, but a member of the IS team suggested it be moved here. "Most recently I got this error (Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) so does this mean that SQL Server is still trying to use named pipes even if I only have TCP/IP enabled in SQL Server Configuration Manager?"
I'm having the same issue, and here's our scenario:
Installed SQL Server 2005 Developer Edition on a machine with WinXP SP2 and enabled remote connections over TCP/IP
Installed SQL Server 2005 Standard Edition on a machine with Win2003 SP1 (remote connections over TCP/IP enabled by default)
Attempted to 'Copy Database' from Developer Edition TO Standard Edition using 'Detach and Attach' method and recieved the error on the Win2003 machine: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server
Attempted to 'Copy Database' from Developer Edition TO Standard Edition using 'SQL Management Objects' method and recieved the error on the Win2003 machine: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server
Reinstalled Standard Edition on the Win2003 SP1 machine
Checked all the settings on both machines several times, restarted services etc., and read every post I could find referencing the error.
Same error
Lost my last hair
Thanks in advance,
Steve
View 77 Replies
View Related
Dec 5, 2007
My configuration is: Vista Home Premium, SQL Server Express and I'm trying to access a database on an instance named AxisSQLServer in a C# application.
As a result of a previous post (SQL Network Interface, error 28), I have selected "Local and Remote, using TCP/IP only" in the Surface Area Configuration for Services and Connections.
SQL Server is started.
SQL Server Browser is started.
Both programs have been added as exceptions to the firewall (don't understand why I would need to do this since everything is on the same box).
Have turned off McAfee AV.
My connection string reads:
string connectionString = "Data Source=localhost;" +
"Initial Catalog=AxisSQL;Integrated Security=SSPI";
where AxisSQL is the database I'm trying to read.
I have looked at and followed numerous forums and blogs and always get the same error.
Stan
View 1 Replies
View Related
Apr 10, 2007
I have a web application developed in VS.NET 2005 [using C# as code behind]; and it uses SQL Server 2000 Enterprise edition as backend.
The application runs fine, though it gives an error on IRREGULAR intervals on SQL data requests.
Error Details:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
My problem is this:
1) Why does it show an error of SQL 2005, while I use SQL 2000. SQL 2005 is not even installed on the server, though VS.NET 2005 is installed.
2) The error comes only at irregular intervals. Users are able to login properly otherwise.
3) Application starts working again if we do either of the following: (a) Restart IIS (b) Restart application pool (c) Restart server.
4) Named pipes and TCP/IP are added to the "Network Configuration" of the SQL server 2000.
5) Error does not come on any specific page; or any specific code; or at any specific time.
6) We do not have any background service or any other activity happening on the server; and the server hosts only this application, within a single virtual root.
Any thoughts on why is this happening, and how to resolve this?
View 10 Replies
View Related
Jan 2, 2007
OS: Win 2003 Service Pack I on 2 boxes
SQL: SQL Server 2005 Clustered System
Situation: I have created a maintenance plan to backup my transaction log every hour. This runs fine for some time and then later that day it stops working. This could happen at any anytime, and I end up having to manually kick it off again. I read the SQL error logs and this is what it points to:
[298] SQLServer Error: 2, Named Pipes Provider: Could not open a connection to SQL Server [2]. [SQLSTATE 08001]
[165] ODBC Error: 0, Login timeout expired [SQLSTATE HYT00]
[298] SQLServer Error: 2, An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. [SQLSTATE 08001]
[382] Logon to server 'JAXNVSQL1CLS' failed (ConnAttemptCachableOp)
[177] Job MaintenancePlan Insight Transaction Logs has been requested to run by Schedule 10 (Insight Transaction Log Backup)
[165] ODBC Error: 0, Login timeout expired [SQLSTATE HYT00]
I have already used SAC to confirm that remote connections is enabled using TCP/IP and Named Pipes. I have used the server configuration tool as well to check this. I have used the Studio Management and checked on the remote connections as well.
I know these protocols are enabled and working because I have used the Studio Management to check on the activity connections type and seen both are working. Plus the fact this maintenance plan does work, it just so happens something causes it later to fail. When this does fail, I log onto the server but can not login using the Studio Management , I get [298] errors. I can login using the Studio Management on my laptop remotely but can not manually kick off the maintenance plan. I end up having to log on to the server and restart the MSSQL Server service and manually kick off my plans. (By the way these services do not show shutting down in the Windows event viewer). After restarting the MSSQL Server service and manually executing the maintenance plan everything is fine until the next time it hits a glitch.
I do have SQL Browser up and running, all of the MSSQL services running, I need some help as to what may be causing this problem!!!!!!!!! HELP!!!!! I am losing my mind!!!!
View 5 Replies
View Related
Sep 28, 2007
Hi,
I have merge replication configured over VPN and the replication is failing to connect to the subscriber through Named pipes with the error Named Pipes Provider, error: 40 - Could not open a connection to SQL Server ......
Actually , I am having issues with Named pipes connection from publisher to subcriber. I have enabled the protocols and also enabled the remote connections using both tcp/ip and named pipes. I have created the client network alias using named pipes
Also, due to security reasons only few ports have been released on the subscriber. Please provide me some information on the following.
1) Does any port specifically be released for listening on named pipes? i am able to connect using tcpip with out any issues as 1433 has been released.
2) How to configure the replciation to use tcpip and not named pipes (guess by default it will use named pipes)?
View 1 Replies
View Related
Apr 23, 2008
Hi Friends,
Im using .Net2008 and MS SQL Server2005, I Have a web application , i want to connect to the server machine SQL Server, When i run the application im getting the following error.
Im trying to connect to the database from local machine application to server machine database
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
My WebConfig File is<connectionStrings>
<add name="NewConnectionString" connectionString="Data Source=sqlserverservername.com;Initial Catalog=Test;UID=User;PASSWORD=Pwd;Integrated Security=True;connect timeout=30" providerName="System.Data.SqlClient"/></connectionStrings>
<appSettings>
<add key="connectionstring" value="Data Source=Sys67;Initial catalog=DB;user id=sa;password=sa;connect timeout=30"/>
</appSettings>
Please Help me to sortout this ISSUe, Its very urgent please
View 7 Replies
View Related
Aug 7, 2005
HiI'm a complete sql/asp.net newbie and want to try this tutorial:http://beta.asp.net/GuidedTour/First I installed:Visual Web Developer 2005 Express Edition Beta 2systemsettingssoftware shows the "sql server 2005 express edition ctp (sqlexpress)" installedmmcservice shows me the SQL Server (SQLExpress) is runningFollowing the guided tour I use the commandline, type cmd, and type in the commandbox: "C:Program FilesMicrosoft SQL Server90ToolsinnSQLCMD90" -S "localhostSqlExpress"Instead of localhost I also tried computername.smallbusiness.local (thats my fully domain name). However I always receive the error:
Named Pipes Provider: Could not open a connection to SQL Server [2]Thank you very much for all your help
View 1 Replies
View Related
Mar 17, 2008
Hi to all,
We have 4 client machine and 1 server machine, that server have all the sql server 2005 database€™s.
A project developed from client1 with Asp.net 2005 now I need to access that project from client2 so I type http://My Ip address/Folder Name/home.aspx in my browser here when the sql connection is open(SqlConnection.Opn()) then I meet this problem
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Please reply me.
View 2 Replies
View Related
Jan 23, 2007
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
I am getting this error and using this connection string
Data Source=192.168.0.100;Network Library=DBMSSOCN;Initial Catalog=ENet;User ID=eonline;Password=eonline;
What can be solution for this.
View 4 Replies
View Related
Mar 10, 2008
Hi, I am working on VS 2005 and using SQL 2005 Express and i am processing excel files and inserting records in data base as i processing starts and almost after processing 600 i got this error provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server. how can i solve that thanx
View 3 Replies
View Related
Apr 26, 2007
We just changed the dev environment to sqlagent. From then we were unable to see the reports on the report server because:
An error has occurred during report processing.
Cannot create a connection to data source 'IHRSDataSource'.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
this error is cropping up.
To Resolve this issue, we checked the Surface Area Configuration and also checked the Reporting Service Configuration . There seem to be no problem and everything looks ok.
Please help me in resolving this issue.
View 4 Replies
View Related
Mar 17, 2008
Hi to all,
We have 4 client machine and 1 server machine, that server have all the sql server 2005 database€™s.
A project developed from client1 with Asp.net 2005 now I need to access that project from client2 so I type http://My Ip address/Folder Name/home.aspx in my browser here when the sql connection is open(SqlConnection.Opn()) then I meet this problem
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Please reply me.
View 1 Replies
View Related
Feb 20, 2006
Hi All,
I am new to dotnet. I tried connecting to the database MS SQL Server 2000. I gave the code like, the one below, in form load event,
SqlDataReader dr = null;
SqlConnection myConnection = new SqlConnection("Data Source=IP;Initial Catalog=name;User Id=uid;Password=pwd;");
myConnection.Open();
myConnection.Close();
But I could not connect. The error message highlights the line myConnection.Open() and displays the error
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
It tries connecting to SQL Server 2005. There is no SQL Server 2005 in that system. There is only SQL Server 2000.
I have the aspx code in my local system and the database in another machine.
Could Someone please help me out in solving this problem.
Thanks,
Arun. S
View 26 Replies
View Related
May 20, 2008
hi all
I realised this has been done to death, and so much information out there but I am still in a quandry.
I have had to rebuild my computer.
This is what I did
XP machine
using SQL Server 2005 Standard Edition
using Windows Authentication
NZ6(MSSQLSERVER)
straight default install all the way
unfortunately when ready to run reports from my instance(computer)
I received the error as in provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server
thought I had it all okayed but obviously something not right
so ended up unistalling then - did the following:
Load SQL Server from disc1 and start install
failed on alter Counter Registry key error
fixed this from KB article (known error that can happen)
restarted
Went to Windows Update
check IIS is installed - tick is on - IIS - admin tools - make sure asp2 is associated - yes ok
Then back to install sql server - there is no instance set up yet
Disk 2 and setup .exe
All ok on Reporting Services, Analysis etc.
But once again all seems fine but still getting the error:
connection is all fine in Management Studio - eg I can see tables etc
connection is all fine in Business Intelligence - eg I can preview my reports
I then can deploy up to - NZ6
open NZ6
eports
report is there fine - but just errors
some simple little tick that I have not done!!
I seem to have checked and rechecked everything and obviously doing another re-install does not seem a logical step from here.
I will continue to check but if someone jump in and advise please would be great.
cheers
jewel
View 6 Replies
View Related
Oct 15, 2007
Hi
I am creating a web site using Visual Studio 2008 & trying to connect to database on SQL Server 2000. My test connection is successful but while debugging the page I am getting this error :
" provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server "
Your suggestions on that will be appreciated.
Thanks
Ashok
View 5 Replies
View Related
Aug 27, 2007
Guys!
has MS done Anything about this issue? I am running NT2K and have the same issue y'all having
provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server
Does anyone have a fix or a workaround that will work once the application goes live?
View 1 Replies
View Related
Apr 3, 2007
Hi,
Am getting the followning error:
{"An error has occurred while establishing a connection to the server. When
connecting to SQL Server 2005, this failure may be caused by the fact that under
the default settings SQL Server does not allow remote connections. (provider: Named
Pipes Provider, error: 40 - Could not open a connection to SQL Server)"}
from my application where 3 service references had been added
and hav added this segment in app.config file
<configSections>
<section name="dataConfiguration" type="Microsoft.Practices.EnterpriseLibrary.Data.Configuration.DatabaseSettings, Microsoft.Practices.EnterpriseLibrary.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=null" />
</configSections>
<dataConfiguration defaultDatabase="Connection String" />
<connectionStrings>
<add name="Connection String" connectionString="Data Source=DPA1W075Binstancename;Initial Catalog=SoapBox;Integrated Security=SSPI;"
providerName="System.Data.SqlClient" />
</connectionStrings>
Solutions recommended for this were start running the SQL browser instance and enable Namespipes in Sqlserver configuration manager.Did both.. but nothing worked.
Still getting the same error..
Can somebody plz help me?
View 2 Replies
View Related
Jul 21, 2007
Hi guys, I have a problem with error: 40.
I made a Web page, and it works perfect on my local machine, everything is OK, until I uloaded page to the server, it reports this error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735091
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +820
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +359
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1770
System.Web.UI.WebControls.Repeater.GetData() +50
System.Web.UI.WebControls.Repeater.CreateControlHierarchy(Boolean useDataSource) +232
System.Web.UI.WebControls.Repeater.OnDataBinding(EventArgs e) +53
System.Web.UI.WebControls.Repeater.DataBind() +72
System.Web.UI.WebControls.Repeater.EnsureDataBound() +55
System.Web.UI.WebControls.Repeater.OnPreRender(EventArgs e) +12
System.Web.UI.Control.PreRenderRecursiveInternal() +77
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1360
I dont't Know what to do. Please HELP!
View 6 Replies
View Related
Apr 4, 2008
I've just posted mywebsite andthis error keep being trhrown as soon as I access the DB
I dont understand what is going on and if I dont get it working bu today will delivery date will expire and I will get in trouble...
So anyone knows what is going on
It says the following:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Here is my con string :
<add name="ASPNETDBConnectionString" connectionString="Data Source=p3swhsql-v09.shr.secureserver.net;Initial Catalog=myCatalog;User ID=MyID;Password='Mypassword"/>
Thanks a lot
View 4 Replies
View Related
Mar 5, 2007
Facts:1. I am using my account on Godaddy trying to connect to my sql server db.2. I can get into my db using user id and password.3. Godaddy's help file shows this for a connection string: connectstr = "Driver={SQL Server};SERVER=" & db_server & ";DATABASE="
&db_name & ";UID=" & db_username & ";PWD=" &
db_userpassword4. My connection string: "Server=whsql-v09.prod.mesa1.secureserver.net;uid=dbasolutions;pwd=***;database=DB_87972;" & _ "Trusted_Connection=False providerName=System.Data.SqlClient"{password **** out}5. Get error message An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) I tried to email Godaddy's help desk with this information. There first response: We do not allow remote connections to our sql server database.There second response was to read the help file!Does anybody have any suggestions? Thanks in advance,bswanson
View 1 Replies
View Related
Apr 5, 2007
We experience the 40 error when our Asp.net code runs under IIS and uses named pipes to a sql server 2005 named instance.
We've tried all suggestions found on blogs and KB articles such as making sure the named pipes protocol is enabled, making sure the Browser service is started, making sure Allow Remote Connections is enabled, making sure we're not using Asp.Net 2.0 membership providers, and the list goes on and on.
We boiled it down to a simple test scenario. We open a SqlConnection to the sql 2005 box in the code with the intention of binding a datareader to a gridview, but it never gets that far because the connection.Open() fails.
If we run this test application as a virtual directory in IIS and Asp.Net 2.0, the connection.Open() fails.
If we run this test application from Visual Studio .Net using Cassini (PWS), the connection.Open() succeeds and binds to the gridview.
What could be causing the connection to fail under IIS but succeed under Cassini? We've tried setting IIS to run as a domain user and with digest authentication enabled. That made no difference.
Any help or insight is appreciated!
View 3 Replies
View Related
Mar 1, 2007
Hi,
I am trying to connect to my SQL Server 2005 but it gave me following error message.
TITLE: Connect to Server
------------------------------
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
So, Please help me to solve this problem.
tnks.
View 20 Replies
View Related
Jan 28, 2008
Hi I always get good reply from u all, thank you,
I have copied my asp.net website from one server to another. they administrator made necessary modification on IIS manager . and able to see the website on browser. but now i can't loging to system using old password.
I tryed to create new password then also it gives error
System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Here I have used asp.net login control and membership class. Do I need to make nay changes in code.
I have already modified server name in connection string in web config file.
any one can say what is the problem and how to solve this.
thanks
Pat
View 1 Replies
View Related
Jun 18, 2007
My connection string (to a remote instance of SQL Server Exress 2005) is exactly the same when the web files are located on my local machine or my remote machine, and while it works fine when I use the local web files, I get the following error when I use the remote files:
"Named Pipes Provider: Could not open a connection to SQL Server [53]"
As you can see, since it works from the local version, I've setup SQL to accept remote connections via TCP/IP and Named Pipes. I'm using IIS7 on the local, and IIS6 on the remote, in case that makes a difference. I have other sites setup the same way, which work fine.
Any thoughts?
View 5 Replies
View Related
Apr 18, 2008
Hi ,
I am struck with one issue.Plz help me out if you have any solution for this one.
Details
Front End - Visual Studio 2005
Back End -SQL Server 2000 (Remote database)
Error i am getting is
{System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at dbcAccess.clsSQL.GetConnect() in C:Documents and SettingskerlsgMy DocumentsVisual Studio 2005ProjectsdbcAccessdbcAccessclsSQL.cs:line 296}
{System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
View 6 Replies
View Related
Jan 24, 2008
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
View 2 Replies
View Related
Apr 10, 2008
Hi,I have SQL Server Express Edition. I tried working out some ASP.NET Labs in my local system. Here is the link of the Virtual Lab which I tried. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032286906&EventCategory=3&culture=en-US&CountryCode=USI recieve this error in my local system. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I tried working out solutions from various websites. But the no solution is effective. Could anyone help me in solving this issue.
View 1 Replies
View Related
Apr 30, 2008
I'm working on an insert into a database and I barrowed this code stright from Microsoft, changing the info I need. I keep getting an error "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)" This is the same connection string that I use for querying the database without a problem. Anyone have any ideas?
Jeff
SqlConnection con = new SqlConnection("Data Source=.SQLEXPRESS;AttachDbFilename=software.mdf;Integrated Security=True;User Instance=True;");SqlCommand cmd = new SqlCommand("INSERT INTO download_table (username, computer_name, computer type, install type, date, email, agree, title) VALUES (@username, @computer_name, @comptype, @installtype, @date, @email, @agree, @title)", con);cmd.Parameters.Add(new SqlParameter("@username", SqlDbType.VarChar, 50));cmd.Parameters["@username"].Value = username;cmd.Parameters.Add(new SqlParameter("@computer_name", SqlDbType.VarChar, 50));cmd.Parameters["@computer_name"].Value = computer_name;cmd.Parameters.Add(new SqlParameter("@comptype", SqlDbType.VarChar, 50));cmd.Parameters["@comptype"].Value = comptype;cmd.Parameters.Add(new SqlParameter("@installtype", SqlDbType.VarChar, 50));cmd.Parameters["@installtype"].Value = installtype;cmd.Parameters.Add(new SqlParameter("@date", SqlDbType.DateTime, 50));cmd.Parameters["@date"].Value = date;cmd.Parameters.Add(new SqlParameter("@email", SqlDbType.VarChar, 50));cmd.Parameters["@email"].Value = email;cmd.Parameters.Add(new SqlParameter("@agree", SqlDbType.VarChar, 50));cmd.Parameters["@agree"].Value = agree;cmd.Parameters.Add(new SqlParameter("@title", SqlDbType.VarChar, 50));cmd.Parameters["@title"].Value = title;cmd.Connection.Open(); <--- This is where I get the above errortry{cmd.ExecuteNonQuery();}catch (SqlException ex){}cmd.Connection.Close();
View 7 Replies
View Related
Jun 28, 2001
Can anybody help?
I have recently got any error -
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC SQL Server Driver][Named Pipes]Connection Broken
/
Does anybody know how to resolve or point me in the right direction.....?
Thanks
View 4 Replies
View Related
