SQL Diagrams And Back And Restore
Jan 25, 2006Everyone,
I simply would like to know if ER Diagrams (under Database -Diagrams) on SQL Server and removed once the database is updated via a backup and restore.
Thanks,
Saurav
ADVERTISEMENT
Back And Restore MSSQL
Mar 14, 2008How could i back and restore my MSSQL using a programmatic way throw asp.net. Also Can i use do an incremental back. Regards,IseL
View 7 Replies View RelatedBack Up And Restore Problem
Aug 11, 2006Hi All,
I have a problem that I haven't been able to solve it. At the end I am confused I need some clarifications.
Background:
I am using full back up recovery plan. I am getting daily full back up and every 15 minutes log_back up. I created these back ups by using Database Maintenance option. However I have been trying to restore the log_back up, but I couldn't achieve it.
Question1- When I take log back up do I have to activate "Remove inactive entries from transaction log" or not??
Info: When the log back up was done it deletes the latest 4th one. I have done this without no reason. Should I keep like that or should I allow the files being deleted right away after transaction logs backed up?
Question2- I cannot restore the log files I don't know why? I have followed every description that I read. After I restored full back up with NOREOCVERY the database hangs out says "loading" but it doesn't do anything and when I try to restore it doesn't accept the latest log back up file and it urges me to put newer file than I have but ıt is only latest log back up that I have Why does this happen?
I am so confused. Please help me
:confused:
Thanks
LS
HELP!!! Can Not Restore Database From Only Back Up I Have
Jul 10, 2006I had to transfer my database from one server to another. Both are running SQL 2000. I backed the database up and moved it to the new server however when I try to do a restore I get the following message:
The media set for database "xxx' has 2 family members but only 1 are provided. RESTORE DATABASE is terminating abnormally.
I did some searching and found a couple of posts that mentioned something about the back up including 2 files.
My problem is that the machine I backed this up from crashed when it was shut down and would not reboot so all of the data and the original database do not exist. Is there any hope of restoring this database. It is pretty critical.
Thanks,
Melissa :-)
Back And Restore Scripting
May 23, 2008
Hi i am backing up a database, copying it to a shared folder on a different computer on same LAN, then restoring it on the different computer.
it used to work fine untill last few weeks.
I have also tried robocopy to copy the files....doesnt works.
the backup is 90GB.
It reports, insufficient resources.
I have rebooted the different computer too.
Restore Back To SQL 2000
Oct 1, 2007Is it possible to uninstall SQL 2005 and reinstall SQL 2000 if I need to? I would obviously have a backup copy of the database(s) from the SQL 2000 version. If so, is this a major ordeal to perform?
View 5 Replies View RelatedIs It Possible To Just Restore Particular Tables From A Back Up Of A Database
Jan 29, 2007Hi,
I backed my sql server database on Fri at 3:15pm and then tried importing some tables individually from a different database and but that didnt work out too good, so is there a way i can just restore particular tables from the backup.
any help will be appreciated.
regards,
Karen
Need To Back Up A Database And Then Restore It On Another Server
May 18, 2007I need to back up a production database on one server and then copy it to a test server wherel it will be restored. The problem is that I don't know where to move the file to on the production server before I restore it. Is there a special folder I need to copy the file to? I see a folder named ProgramFilesMicrosoft SQL Server but beyond that I have no idea where to copy the file so that it can be restored?
Can someone help me out please?
Back Up And Restore For Hosting Company
Jan 16, 2008Hi I need for my hosting company to send my db that I have convert from SQL EXR.2005 to 2000 and send them a backup file.
I have back up it (task> backup )and sand it over they cant open (restore) it and I do not understand why
What did I do wrong? (this time:- )
Thanks assaf
Back Up To A Logical Device And Restore It
Nov 6, 2007I want to back up my database to a logical drive and restore it from this logical device. But I am unable to see my logical device through sql server management studio interface. I am able to back up to a logical device and restore it from logical device through T-SQL code. I am wondering how come I am unable to see my logical device from sql server management studio interface. Is there any way, I can solve this problem? Thanks in advance.
View 3 Replies View RelatedHow Can Take Back-Up And Restore Database From A Web Form Wsing Asp.net(vb.net)
Aug 18, 2005I want to give a facility to backup database restore database to the customer in my project.
Database is stored in sql server 2000.
From the website the browser can take backup by clicking BACKUP button and
restore database by clicking RESTORE button.
is it possiable in asp.net programatically ?
Back Up And Restore Using Transaction Log And Incremental Backup
Feb 1, 2001hi, I would like to know the correct reaction for a crash in both senarios.
First senario,
I made a full back up at 6 am , then scheduled sql server to make transaction log back up every 2 hours (8,10,12,2 pm,4,6,8) . If I have a crash at 12:30. How would I resotre the data in the first senario....Can I restore the full back up done at 6 am then restore the last transaction log backup ( which is 12 Noon ) . I am not sure If I need to resotre the whole tran from 6 am till the time it was crashed.
Second senario,
I made a full back up at 6 am, then scheduled sql server to make Incremental backup every 2 hours (8,10,12,2 pm,4,6,8) . If I have a crash at 3:00 pm. How would I resotre the data in the second senario. ....Do I restore the full backup at 6 am then restore each incremental backup backwords ( 2,12,10,8)
AS you can see, I am not sure how to deal with this issue, I do appreciate your feedback.
Best regards
Ahmed
Upgrading Hard Drives, Best Way To Back Up And Restore SQL
Jul 20, 2005I'm formatting my mirrored drives and installing a third drive forraid 5 to add more space. I have backup exec. Can anyone tell me thebest way to backup SQL so I can be sure it will restore properly? Iwas thinking of using imaging software and creating an image to a USB2.0 hard drive. The DB is 80 gigs.ThanksNH
View 3 Replies View RelatedNeed To Back Up && Restore A SQL Server Database When Only SQL 2000 And 2005 Are Available.
Oct 22, 2007I am maintaining a .net 1.0 asp.net web application that accesses a SQL server 2000 database. I need to backup the database and then restore it on a laptop. Currently it resides on a server. The problem is that on the server they are using sql server 2005. If I backup using 2005 and then try and restore this database using SQL server 2000 or 2005 on the laptop, I get an error message. "Too many backup devices specified for backup or restore; only 64 are allowed. RESTORE DATABASE is terminating abnormally.
What can I do to restore the database? Must it be backed up with SQL server 2000 and then restored with SQL Server 2005?
Please help!
How Do I Restore Sql Server Database Primary Data Back .mdf
Feb 12, 2007
Hello guys
My server crashed but luckily I was not able to get back my files with help of recovery software.
Now, all I have from the database are just sql server database primary data .mdf and sql server databaseTransaction Log Files .ldf. I need to restore these data back to sql server.
Please could someone tell me how to restore these two file types back to my sql sever 2007 database?
Thanks
netboy
How To Verify The Integrity Of A Back-up File Prior To Restore?
Mar 22, 2007Hello,
I have some C# (.NET 2.0) code that performs back-ups and also can perform restores of back-up files. I would like to validate the integrity of a file prior to initiating a restore operation. In other words, I want to know, before I try to restore, if the file is just a random file (picture, work doc, zipped backup, etc.) or if it is a valid SQL backup file.
Any help would be greatly appreciated.
Thanks,
hassiah
Back && Restore From Network Path Using SQL Server 2005 Express Edition
May 27, 2008
I am trying to restore database from network drive but
sql server 2005 express is giving error
"system.data.sqlclient.sqlErroratabase <dbname> cannot be opened due to inaccessible files
or insufficient memory or disk space (microsoft.sqlserver.express.smo)."
But when I restore database from "C:" or local drive it alows to do so.
Can anyone help.
I Want To Revert Back To Original State Of Database Before I Performed Restore Database
Nov 15, 2006Hello,i am in great trouble. I want to revert back to original state ofdatabase before i performed restore database on my sql server 2KDatabase. Accidently i didn't take backup of my Database and i didrestore, so is there any way to get the original state back of myDatabase?Any suggestion will be highly appriciated.Regards,S. Domadia.
View 2 Replies View RelatedHaving Difficulty Setting Back Up To Back Up File Wihout Datetime Stamp SQL 2K
Apr 24, 2007Hello,I'm trying to create a simple back up in the SQL Maintenance Plan that willmake a single back up copy of all database every night at 10 pm. I'd likethe previous nights file to be overwritten, so there will be only a singleback up file for each database (tape back up runs every night, so each daysback up will be saved on tape).Every night the maintenance plan makes a back up of all the databases to anew file with a datetime stamp, meaning the previous nights file stillexists. Even when I check "Remove files older than 22 hours" the previousnights file still exists. Is there any way to create a back up file withoutthe date time stamp so it overwrites the previous nights file?Thanks!Rick
View 5 Replies View RelatedMirroring :: Principal Database Get Role Back After Being Back On Line
May 14, 2015New to Database Mirroring and I have a question about the Principal database server. I have a Database Mirroring setup configured for High-safety with automatic fail over mode using a witness.
When a fail over occurs because of a lost of communication between the principal and mirror, the mirror server takes on theĀ roll of Principal. When communication is returned to the Principal server, at some point does the database that was the previous Principal database automatically go back to being the Principal server?
Reporting Services :: Run Two Reports Back To Back Without Page Eject?
Jun 9, 2015I need to run two reports each of A5 Size to run back to page and print on single A4 paper means in 1st half Sale bill will be printed and in second half Gate Pass Will Be Printed both report will be on same page and size and shape should be maintained. How to do it.
View 4 Replies View RelatedHow Do I Back-up &> Truncate &> Shrink &> Back-up SQL 2000
Jul 20, 2005Hello,I am hoping you can help me with the following problem; I need to process the following steps every couple of hours in order to keep our Sql 2000 database a small as possible (the transaction log is 5x bigger than the db).1.back-up the entire database2.truncate the log3.shrink the log4.back-up once again.As you may have determined, I am relatively new to managing a sql server database and while I have found multiple articles online about the topics I need to accomplish, I cannot find any actual examples that explain where I input the coded used to accomplish the above-mentioned steps. I do understand the theory behind the steps I just do not know how to accomplish them!If you know of a well-documented tutorial, please point me in the right direction.Regards.
View 2 Replies View RelatedDiagrams
Nov 6, 2000I am trying to create a new db diagram.
I selected my db -->right-click on Diagrams--> New database diagram -->Select some of the existing tables in the wizard-->finish and....
I don't see anything else but an empty screen
When I tried to edit an existing database diagram, by right-clicking on it -->Add existing table and selecting a new table from the list, I got an error message: "Co Initialize has not been called."
Could you help me on this one, please?
;-)
Thank you,
Anastasia
SQL Diagrams
Mar 28, 2008I am not able to see SQL diagrams of SQL Server 2000 IN SQL2K5 SSMS, is there a work around for this?
------------------------
I think, therefore I am - Rene Descartes
Rolling Back SQL Server 2005 Databases Back To SQL Server 2000
Sep 22, 2006Does anybody know of a way to rollback SQL Server 2005
databases back to SQL Server 2000? Is there a way of doing it without
resorting to Copy Database Wizard? I love to find a way of attaching a SS 2005 database
to a SS 2000 instance without any issues.
I recently upgraded to SS 2005 and I am very unhappy with the SS 2005 and I
want to rollback to SS 2000, which was a lot more stable. I am having
several major issues that are affecting my whole company's day-to-day
operations and the managers are not happy. Some of the issues include
night time batch running very sluggish for no apparent reason. This is a
biggest problem because it only occurs once or so a week and causes a disturbance
with the daily activities when the night time processing isnt completed on
time. The rest of the time, the batch processing runs great, even a little better then on SS 2000. I
don't believe it is a matter of my application needing to be retuned because if
that was the case, then why isn't it running sluggish every night? Also,
it's never the same day that the sluggish behavior occurs. If it was occurring
on the same night, then I would have something to investigate within our
application, but it doesn't. Another issue that I am having involves a
night time job that restores a copy of the production database to the Data
Warehouse server to be used for updating the data warehouse. Again, most
of the time it runs great (~2 1/2 hours), but once or twice a week, it goes
stupid and takes 6 1/2 hours for no apparent reason. Again, it is not happening
the same day either, which could give me something to invesigate. On SS 2000, this same job ran flawlessly. Never I did I run into situation that the
database restoration took that long to run. Even another issue involves a SQL Server Agent Job that was put into suspended
state. What's a suspended state and how can I get it out of suspended
state? I can find no information about suspended state in BOL. I
did a Google and nothing came up. If this suspended state was put
in for security reasons, great, but then tell me how I can remove the suspended
state. I am also not happy with the
fact that I can't get accurate information about the queries that are actively
running at that particular moment. In SS 2000, when I noticed high CPU
usage on the server, I would run the sp_who2 active stored proc and it would
show me all the active thread and how much CPU it was consuming. I would
then find the running threads with the highest CPU numbers and investigate the
query and see if we could improve it. Now in SS 2005, I get in the same
situation and run the sp_who2 stored proc, and there is no smoking gun.
All of the active threads are showing very little CPU usage, which I am very
suspect of. What the heck happen to sp_who2? I looked at some of
the other ways of looking at running processes (i.e... sys.sysprocesses) and
they don't appear to be giving the information that I need.
I am very unhappy and I just want to roll back to SS 2000 and wait a couple of
years before I upgrade to SS 2005.
Dave Brown
Database Diagrams
Mar 9, 1999Is there a way to use an Oracle linked server to create a database diagram? Or do I have to bring the whole Oracle db into SQL7 and then create the diagram?
Peter Cwik
Copying SQL Diagrams
Feb 26, 2002Is there a way to export a database diagram? No preference as to the format of the exported file.
Thanks!
How To Copy Diagrams
Aug 6, 2002Subject says it all; how do I copy diagrams from one SQL2K database to another? (This is coming up because I'm converting collation sequences by DTSing data from DB1 to DB2, where DB1 was copied from SQL7 and DB2 was created with the collation I want. It gets tables and views, but not Diagrams and Stored Procedures. )
Thanks,
AL
Database Diagrams
Oct 11, 2001Is there a way to allow a non-dbo to look at another's database diagram?
View 3 Replies View RelatedDatabase Diagrams
Apr 5, 2004Do you need to be a member of the dbo role or an sa on a particular sql server to create a database diagram? I just want to confirm this is the case.
Any assistance will be helpful.
Maria
DataBase Diagrams
Nov 29, 2007In our organization, we are using SQL Server 2005 Management studio as the client interface to access all our enterprise Databases.Most of the databases are built on SQL 2005 DB Server.
However, We have one of the Database built on SQL Server 2000, which also has Database diagrams in it. Though We are able to view all the DB objects through SQL 2005 managment studio interface, but unable to view the diagrams.
I understand that, the binary data of the diagrams are stored in "dtproperties" table on SQL 2000 but in SQL 2005, it is stored in "sysobjects"(not sure) table and both are entirely different.
Following are my questions.
1.Since the DB is still on SQL 2000,How can we view the diagram objects thru the SQL 2005 Enterprise manager.
2.For the migration process of SQL 2000 to SQL 2005, How can i migrate the database diagrams.
Appreciate the responses.
Database Diagrams
Jan 11, 2008Hi All
I am using SQL server 2000 and I would like to create Database diagrams but It doesn't give me any option to crate one. It only shows "Working with SQL Server 2000 diagrams" and "Refresh" with no "create new diagram" and in other servers it but its only in my desktop that doesn't and I have full access
Lost My Diagrams
Jul 23, 2005I'm using SQL Server 2000 and yesterday I seem to have lost mydiagrams. Not the diagram icons themselves, but the data diagrams yousee when you double click the icon.I tried reinstallling Enterprise manager, unregistereing andregistering the database without success.Any help appreciated.Thanks,Tom
View 4 Replies View Related