Hi,
I need some help, I have uploaded a copy of a database and cleared all the content of every tables constituting that same database. When trying to log into the main folder, I get the error message bellow. Could anybody tell me what kind of error that is, could it be possible that it's a question of setting the ODBC for the database? A driver issue.
I very new to this, so if anybody could explain it to me in a userfriendly way!
Thank you!
Rudy
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
Hi everybody, I do custom log shipping over network like
step 1 backup log to C:.. step 2 zip log file c:... zip step 3 copy zip to \sm01 estorelogs... step 4 unzip file step 5 restore log with stand by
Few times a month it fails with
Error = -2147467259 (80004005) Error string: Timeout expired Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 Error Detail Records: Error: -2147467259 (80004005); Provider Error: 0 (0) Error string: Timeout expired Error source: Microsoft OLE DB Provider for SQL Server
Hi all. I have just migrated our DWH environment from one server to another, from a named instance to another one. When I run the DTS it works fine, but when I launch it by using a job (running dtsrun) it fails with the following error:
DTSRun: Loading... Error: -2147467259 (80004005); Provider Error: 17 (11) Error string: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0. Process Exit Code 1. The step failed.
I'm writing a PDA app which has an SQL CE database on the storage card. Under certain circumstances, I get an Error Code 80004005 ; "Unspecified Error" exception (henceforth referred to as "The Error".
I can write to a certain table (the only one which has a problem) many times on the first run of the app since the database was created. However if I exit and reload the app, the error starts hapenning. It does not go away until I delete the database and re-create it.
The database has a password (I've tried with and without this to no avail) and the temp file is being stored on the Storage Card (the PDA itself doesn't have enough memory).
I have been extensively searching the net for existing solutions. I found this one from microsoft, (http://support.microsoft.com/?kbid=919150) which suggests the PDA is coming out of suspend mode and trying to access the Storage Card. This sounds reasonable and similair to my case. I would like to change my code so it is not coming out of suspend mode (instead of trying to find that hotfix) but I don't know what suspend mode is. The code is being called from a button's handler. This sounds like it is coming out of suspend mode, doesn't it?
Has anyone else seen this? It has brought my project to a grinding halt and I can not see anything wrong with my code (it's doing the same insert command I've done a million times before on other tables).
I am importing an excel spreadsheet into SQL Server 2000. The dts package runs perfectly when you execute it under the Local Package pane.
My problem is when i schedule a job to execute the DTS package giving me the same error. I can only successfully execute the package under local Packages. Under Jobs i receive this error:
Executed as user: H-OBAdministrator. ...rt: Copy Data from 'Xagent - Report$' to [CIMPRO1].[dbo].[Xagent_Star_Coater_Points] Step DTSRun OnError: Copy Data from 'Xagent - Report$' to [CIMPRO1].[dbo].[Xagent_Star_Coater_Points] Step, Error = -2147467259 (80004005) Error string: 'R:sharedstar coaterMonthly Points RptCurrent_Month_Points.xls' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides. Error source: Microsoft JET Database Engine Help file: Help context: 5003044 Error Detail Records: Error: -2147467259 (80004005); Provider Error: -534774783 (E01FFC01) Error string: 'R:sharedstar coaterMonthly Points RptCurrent_Month_Points.xls' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides. Error source: Microsoft JET Database Engine ... Process Exit Code 1. The step failed.
Any help on this error would be more than appreciated.
Can anyone help me in connecting sql server and asp. Wheneever try to do the connection, I am getting following error. All the connection string which i am using are correct.
Connecting to the database to change a record works fine in xp/xphome but trying the same thing in 2000 workstaton causes the error above. Here is the script....tried adding a password to sa, but same results Any help would surely be appreciated '========================================================================== ' NAME: templateselector.vbs ' DATE : 6/22/2006 ' ' COMMENT: Runs from an External Process. Assigns a template to an client ' and starts a PXE reset '==========================================================================
Set conn = createObject("ADODB.Connection") conn.Open (sConnection)
Set oWshNet = CreateObject("WScript.Network") sCompName = oWshNet.ComputerName
SQLTEXT="select * from WICON_MACHINES where name = '"&sCompName&"'" Set nodeRS = conn.execute(SQLTEXT)
sMID=nodeRS("MachineID")
SQLTEXT="update WIPXECR_CLIENTS set templateid='"&sTemplateID&"', RESETCMD='1', RESETSTATUS='1' where machineid='"&sMID&"'" Set nodeRS = conn.execute(SQLTEXT)
Microsoft SQL Server 6.50 - 6.50.416 (Intel X86) Jan 23 1999 14:10:24 Copyright (c) 1988-1997 Microsoft Corporation
In a SP I generate the infor RDO in a temporate tables. When i call on ASP send this : Microsoft OLE DB Provider for ODBC Drivers error '80004005' [Microsoft][ODBC SQL Server Driver]Protocol error in TDS stream /asp/rdo/rdo_mty/automatico/rdoejecutivo.asp, line 10
Hi everybodyMy problem with sql server is the following one:I've got my backoffice manager application done with asp technologythat works on sql server installed on Win2000 and running on IIS5.what I've done is simply doing a backup of my db and moving the aspapplication on another server: Windows 2003 with IIS6 and sql serververs.8.Then I tried to set up everything as in the beginning on the previousmachine(Win2K), but I'm getting this error:Microsoft OLE DB Provider for SQL Server error '80004005'[DBNETLIB][ConnectionOpen (Connect()).]Server SQL inesistente o accessonegato.(translated would be "SQL Server doesn't exist or access denied")/sitowebsite/bom/login.asp, line 13....where in the line 13 is set the connection to the database:Conn.Open Application("DBsource")which should be driven by what is set inside the global.asa file:Application("DBsource")="Provider=SQLOLEDB;server=127.0.0.1;database=db_nam e;uid=db_uid;pwd=db_pwd;"Application("WS_DB_TYPE") = ( "SQLSERVER" )I tried to restore the database just not losing information and nothinghappens.I tried also to create a new user and modify the properties as itshould be from the previous settings in the db(db_owner,....etc), stillnothing.any clue is appriciated.many thanks in advance.
Until a few weeks ago I was very satisfied with my frontend/backend application Access 2003/SQL Server Express. Then I tried to build a website with Dreamweaver 8.0 and connect it to the Server DBase and everything went wrong. My problems are the following:
In trying out the connection between DW and SQL I tried and changed some things with no result. I suddenly got a problem with the Norton firewall (wurms part) and with the named instance. At this very moment I sometimes have to switch from ".SQLEXPRESS" to "<machinename>SQLEXPRESS under Windows authentication. (provider: TCP provider, error 0 - no connection because of an active refuse of the goalcomputer)(MSQL Server error 10061). How can I solve this problem? The connection between DW (using ASP) and SQL Server always gives the same error: "ODBC drivers error 80004005 cannot open database x requested by login. The login failed". I tried everything I know (that isn't much by the way) but getting no connection between the two programs. When I test the connection and the recordset in DW everything is OK. Anyone any suggestions? The third problem is the most important. By doing things like (1) en (2) my frontend/backend database has become very very slow (it takes minutes to get a simple query done) and in fact doesnot function at all. When I look in de SQL part everything seems OK and I can open the tables quickly, but in Access the menus work but the forms and queries don't. This problem is very essential to me and I hope there is a solution?
I hope I'll get some answers to the above questions.
In my string below, my forum setup up file, setup.asp , when run delivers an error that it is unable to connect to the database. Error: 800004005
I am running this from within IIS 5.0 aon a Windows 2000 Server, by right clicking the file in IIS and choosing "browse" I am trying to set this up so user IUSR_SERVER_NAME can "read and Write" to the database or instance I have created called rpggamerpro. The authentication in the SSSAC is set to use both Windows and SQL Authentication for the "master". I have set permissions on the folder which contains the SQL 2005 Express installation and database for IUSR_SERVER_NAME to read/write. I have created a IUSR_SERVER_NAME user in the Security/User directory for the database or instance "rpggamerpro" and gave the user read/write permissions there. So I am still at a loss as to what permissions, strings, settings, configuration or whatever the heck else needs to be done in order to get this thing to work. Please anyone willing to help a realative new commer to the SQL and DB world would be greatly appreciated.
trConnString = "Provider=SQLOLEDB;Data Source=nssqlexpress;database=rpggamerpro;uid=IUSR_NS;pwd=;" '## MS SQL Server 6.x/7.x/2000 (OLEDB connection)
After disconnected from VPN (Cisco) , I am not able to connect to my SQL. Getting the error Microsoft OLE DB Provider for SQL Server error '80004005' Timed Out.
Restarting the SQL Server or Reset IIS, nothing works.
If I restart the machine, it works fine again. If I don't connect to VPN, I have no problem.
I am wondering that might be the problem. I enabled all the protocols.
I have posted this also in one forum. Somebody might have idea here.
We have four Windows 2003 advance servers with SP 3 configured on NLB. Each of them has one NIC. Recently we started to get frequent time-out error messages from web applications on those servers when they try to establish the connection with the SQL 2005. If you run web pages application to connect to sql server 10 times, 9 times you will get good connection results and 1 time you will get time-out.
Microsoft OLE DB Provider for SQL Server error '80004005' Timeout expired /common/mypage.asp, line 20
Connection to sql server is established with the connection string. Any idea how to solve this problem? Is there a connectionproblem? from NLB to Web to SQL?
We have tried doing some suggestions (e.g. LMHOST, IP, domain account for WEb to SQL connection, the Query Wait in SQL advance property.), but seems this timeout expired still exist
I've had a DTS Package scheduled to run every morning since June last year, however on Monday and again this morning, the DTS package has failed on two of its steps. This DTS package runs on SQL Server 2000 and the server is a Windows 2000 Server.
Basically, the DTS Package steps that fail are populating a "cache" table from a "live" table and then performing Inserts / Updates on the "live" table from a CSV file depending upon whether data exists in the "cache" table and whether the CSV file contains an "Insert" or "Update" flag. The live table has just over 800,000 rows of data and our nightly CSV extract, containing both inserts and updates, has about 6000 rows.
The error / failure has only happened in the last two days and I'm not too sure if there's any "timeout" feature in DTS and if there is, how I can modify it, or whether this may be something to do with long transactions or temp dbspace running out.
The time that the DTS package runs was modified last week to run two hours earlier (03:00 instead of 05:00) and has ran okay for a few days. I don't know whether this change is a red herring, as I have checked other DTS packages on the machine and none appear to run at the same time.
Here's the message from the third step in the DTS Package (second one that's failing).
Executed as user: SOEincaservice. ... Start: DTSStep_DTSExecuteSQLTask_1 DTSRun OnStart: DTSStep_DTSExecuteSQLTask_10 DTSRun OnError: DTSStep_DTSExecuteSQLTask_1, Error = -2147467259 (80004005) Error string: Timeout expired Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 Error Detail Records: Error: -2147467259 (80004005); Provider Error: 0 (0) Error string: Timeout expired Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_1 DTSRun OnError: DTSStep_DTSExecuteSQLTask_10, Error = -2147467259 (80004005) Error string: Timeout expired Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 Error Detail Records: Error: -2147467259 (80004005); Provider Error: 0 (0) Error string: Timeout expired Error source: Micros... Process Exit Code 2. The step failed.
Any help is greatly appreciated as I've searched these forums and the web and can't really find any answers.
when i am running a Stored Procedures, system always returns me error message below and Stored Procedures stops. please help
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC SQL Server Driver] Received an unrecognized datatype 0 from TDS data stream
sometime it returns error messge like, TDS Buffer Length Too Large or Unknown token received from SQL Server
or Protocol error in TDS stream or Bad token from SQL Server: Datastream processing out of sync. or Invalid cursor state or TDS Buffer Link Too Large or Function sequence error
I am getting the error "Hr=80004005 ERR:OpenDB failed getting pub version 28627" in the SQLCESA30.LOG log file in the "C:Program FilesMicrosoft SQL Server 2005 Mobile EditionServerSqlMobileReplication" directory - the directory set up as the Virtual Directory in Internet Explorer. This occurs when I try to set up a .sdf file to be replicated to a SQL Server 2005 Mobile database (I'm following the instructions from the Microsoft Tutorial - http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnppcgen/html/med302_msdn_sql_mobile.asp).
In the UI, when I attempt to set up a new Subscription (setting up my publication goes without any problems), I get an error. It occurs at the last step of the "New Subscription" step on "Synchronizing Data (100%)" / "In Progress" and reads as follows: TITLE: Microsoft SQL Server Management Studio------------------------------Failure to connect to SQL Server with provided connection information. SQL Server does not exist, access is denied because the SQL user is not a valid user on the SQL Server, or the password is incorrect.HRESULT 0x80004005 (29060) I have set up the snapshot directory, and given the IUSR_[machine name], and IWAM_[machine name], and Administrator users full access to the works. I have given Full Access for Share permissions for this folder as well. When running http://MYBOX/SqlMobileReplication/sqlcesa30.dll?diag from either Firefox or IE, there are no problems (I do get 8.0 Database Reconciler FAILURE 0x80004005, however I'm not using SQL Server 2000, so it shouldn't matter).
I don't believe it's a file permissions problem, because each time I access the URL, an entry is made in the SQLCESA30.LOG file as follows: 2006/01/07 12:53:16 Hr=80004005 ERR:OpenDB failed getting pub version 28627
I've tried running the wizard with the Administrator account, the sa account, and even setting the IIS Virtual Directory to use the Administrator account as the account that Anonymous users run under. I've also set up both TCP/IP and Named Pipes to accept remote connections using the Start Menu ‡’ Programs ‡’ Microsoft SQL Server 2005 ‡’ Configuration Tools ‡’SQL Server Configuration Manager. I've tested this connectivity from another box using the osql command. The connection succeeded. I've even tried regenerating the snapshot, then checking file permissions on the snapshot, but I find no problems (the snapshot generates correctly, and permissions to the IIS User allow read).
I have configured the publication's "Publication Access List" to include every single account that exists in SQL Server, but it still doesn't work.
According to MSDN, error 28627 is a "Client Agent Error" which means SSCE_M_OPENSQLSERVER - "Failure to open SQL Server with given connect string." I'm setting the logon password as the [sa] account in the last step of the Subscription wizard, though. Further, I've configured the SQL Server Agent to run as the Administrator account on my machine (which is both the Publisher and Subscriber at this stage), and I have configured Administrator to have db_owner in each database.
I'm currently receiving the following error message whilst attempting to install SQL Server 2005 Standard Edition on Windows Server 2003 (32 Bit): Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.
This server already has an install of SQL Server 2000 as the default instance. I'm attempting to install a new named instance of SQL Server 2005.
Extract from log:
<Func Name='LaunchFunction'> Function=Do_sqlPerfmon2 <Func Name='GetCAContext'> <EndFunc Name='GetCAContext' Return='T' GetLastError='0'> Doing Action: Do_sqlPerfmon2 PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007 <Func Name='Do_sqlPerfmon2'> <EndFunc Name='Do_sqlPerfmon2' Return='0' GetLastError='2'> PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007 MSI (s) (4C:FC) [10:20:02:833]: Executing op: ActionStart(Name=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Removing performance counters,) <EndFunc Name='LaunchFunction' Return='0' GetLastError='0'> MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1281,Source=BinaryData,Target=Rollback_Do_sqlPerfmon2,CustomActionData=100Removing performance counters200000DTSPipelineC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INI) MSI (s) (4C:FC) [10:20:02:849]: Executing op: ActionStart(Name=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Installing performance counters,) MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1025,Source=BinaryData,Target=Do_sqlPerfmon2,CustomActionData=100Installing performance counters200000C:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INIC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.HC:Program FilesMicrosoft SQL Server90DTSBinnDTSPipelinePerf.dllDTSPipeline0DTSPipelinePrfData_OpenPrfData_CollectPrfData_Close) MSI (s) (4C:94) [10:20:02:864]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI1683.tmp, Entrypoint: Do_sqlPerfmon2 <Func Name='LaunchFunction'> Function=Do_sqlPerfmon2 <Func Name='GetCAContext'> <EndFunc Name='GetCAContext' Return='T' GetLastError='0'> Doing Action: Do_sqlPerfmon2 PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007 <Func Name='Do_sqlPerfmon2'> <EndFunc Name='Do_sqlPerfmon2' Return='2' GetLastError='2'> PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007 Gathering darwin properties for failure handling. Error Code: 2 MSI (s) (4C!F0) [10:23:46:381]: Product: Microsoft SQL Server 2005 Integration Services -- Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.
You can ignore this and it will complete the installation, but subsequently trying to patch with SP2 will fail on the same sections - Hotfix.exe crashes whilst attempting to patch Database Services, Integration Services and Client Components (3 separate crashes).
I've removed SQL Server 2005 elements and tried to re-install, but it's not improved the situation.
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
I cannot execute a package by using Execute Package task. I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says
Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
I am running dts in Sql Server 2005 management studio from Management, Legacy and data Transformation Services.
Once the dts has run, I get this error message "Error Source : Microsoft Data Transformation Services (DTS) Package Error Description : Error accessing Windows Event Log."
We have reports deployed in the Report Server. While connecting from client, we are getting the error "An internal error occurred on the report server. See the error log for more details. rsInternal Error)"
Then we went to Report Server, Reporting Service and SQL Server service are all are running fine.
Important thing is some time the reports are working fine, sometimes i am receiving this error. Please help.
We predict whether the services are automatically restarted or transaction logs exceeding the limit or any other parameters to set to avaoid this error?
I'm trying to use an XML Task to do a simple XSLT operation, but it fails with this error message:
[XML Task] Error: An error occurred with the following error message: "There are multiple root elements. Line 5, position 2.".
The source XML file validates fine and I've successfully used it as the XML Source in a data flow task to load some SQL Server tables. It has very few line breaks, so the first 5 lines are pretty long: almost 4000 characters, including 34 start-tags, 19 end-tags, and 2 empty element tags. Here's the very beginning of it:
<?xml version="1.0" encoding="UTF-8"?> <ESDU releaselevel="2006-02" createdate="26 May 2006"><package id="1" title="_standard" shorttitle="_standard" filename="pk_stan" supplementdate="01/05/2005" supplementlevel="1"><abstract><![CDATA[This package contains the standard ESDU Series.]]></abstract>
There is only 1 ESDU root element and only 1 package element.
Of course, the XSLT stylesheet is also an XML document in its own right. I specify it directly in the XML Task:
I have the error above, but no error log. I can preview the sub report - but this main report fails after working this morning. This is for internal company reports and I rebuilt this one after converting from access. I have looked where the error logs should be, but there are no error logs. I rebuilt the query as I needed to change this, but this did not help. Is there someone who could point me in the correct direction.
I'm running Vista Ultimate. SQL 2005 is set as my Default instance, and SQL2000 is set as (local)SQL2000.
Today, actually half way through today, I restarted my computer after installing Photoshop Updates.
Upon getting my computer back up and running, I cannot access SQL2000 from any website on my computer, nor can I access it from SQL2005 Management Stdio. I CAN access it from Enterprise Manager (SQL2000 tool).
Whenever I run an web app that connects to it I get this error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Now I usually get these when ASP.NET can't point to the right spot, but in this case I'm pointing exactly where I need to go. Any thoughts?
--Edit
I should also add my password got changed a few days ago on our Domain. This was the first time restarting after the PW change.
My link server was working just fine until friday evening. It stopped worked over the week end. with and error Error 7399: OLE DB provider 'MSDAORA' reported an error. OLE DB error .
---my oracle 10g client is working just fine --TNS names looks fine ---i recreated the link but i am still getting the same error.
I need your help because a lot of jobs are using that link on Monday it is going to be crazzzy.
We have a production SQLServer 6.5 running with service pack SP5a update:
I got the following 2 errors.....
1.
Error : 806, Severity: 21, State: 1 Could not find virtual page for logical page 67833121 in database 'tempdb' database 'tempdb'
2.
I got error when I ran a job for Update statistics Error : 614, Severity: 21, State: 3 A row on page 2697653 was accessed that has an illegal length of -8631 in database 'abc'.
For Error 2: I ran update statistics using query analyser. It is fine Is there anything I have to do further?
For Error 1 : The work around given by Microsoft ================================================= I ran DBCC CHECKTABLE(syslogs)
I am getting the following message on : master: Checking syslogs The total number of data pages in this table is 1. *** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device. Table has 11 data rows. DBCC execution completed. If DBCC printed error messages, see your System Administrator.
model: Checking syslogs The total number of data pages in this table is 47. *** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device. Table has 532 data rows. DBCC execution completed. If DBCC printed error messages, see your System Administrator.
tempdb:
Checking syslogs The total number of data pages in this table is 1. *** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device. Table has 31 data rows. DBCC execution completed. If DBCC printed error messages, see your System Administrator.
I ran dbcc checkdb on master,model and tempdb . Still I get the same problem.
for tempdb:
Checking 8 The total number of data pages in this table is 1. *** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device. Table has 19 data rows.
for master: Checking 8 The total number of data pages in this table is 1. *** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device. Table has 27 data rows.
for model: Checking 8 The total number of data pages in this table is 47. *** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device. Table has 532 data rows.
All system databases and userdatabase recovered successfully when I restarted sqlserver.
Hi, I have application in which i am performing synchronization between SQL Server 2000 and SQL Server 2005 CE. I have one table "ItemMaster" in my database.There is no relationship with this table,it is standalone.I am updating its values from Windows Mobile Device.
I am performing below operations for that. Step : 1 Pull To Mobile
Code BlockmoSqlCeRemoteDataAccess.Pull("ItemMaster", "SELECT * FROM ItemMaster", lsConnectString,RdaTrackOption.TrackingOn);
Step : 2 Using one device form i am updating table "ItemMaster" table's values.
So i am getting an error on 3rd step. While i am trying to push it says, "The Push method returned one or more error rows. See the specified error table. [ Error table name = ]". I have tried it in different ways but still i am getting this error.
Note : Synchronization is working fine.There is not issue with my IIS,SQL CE & SQL Server 2k.
Can any one help me?I am trying for that since last 3 days.
Recently in an SSIS package I am getting the following error for a particular Data flow task.
Error: 2008-01-25 12:01:48.58
Code: 0xC0202009
Source: Import Datasynapse Data User Events Source [3017]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF.
End Error
Error: 2008-01-25 12:01:48.73
Code: 0xC004701A
Source: Import Datasynapse Data DTS.Pipeline
Description: component "User Events Source" (3017) failed the pre-execute phase and returned error code 0xC0202009.
End Error
Our guess is when the data size of User Events table is more it throws this error. If we try to transfer small subset of data it succeeds. What could be reason for this error?
Since this is very urgent, immediate response would be very much appreciated.
