SQL Error (SQL Express Related)
Apr 26, 2006
Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed.
This is the error i get every now and then when i attempt to browse to a page. It seems that i am getting this error as its trying to connection to a sql express database??? Only i have set my project up to use sql server 2000 and i am using that DB but every now and then i get this error. Im not sure what else i need to do? Any ideas?
View 4 Replies
ADVERTISEMENT
May 21, 2008
Hi y'all I have a problem in my query.This is my querySELECT dbo.BOS_GL_Workplace.WpszState, Emp2.szName, Emp1.szName AS szEmpName, Emp1.szEmployeeId, dbo.BOS_PI_Division.szName AS Divisi, dbo.BOS_PI_Team.szDescription,dbo.BOS_SD_Route.szRouteId, dbo.BOS_SD_Route.szDescription, dbo.BOS_SD_Route.szScheduleId, dbo.BOS_SD_RouteItem.szCustId, dbo.BOS_SD_Route.szOpUserId,dbo.BOS_AR_Customer.szCustId ,dbo.BOS_AR_Customer.szName, dbo.BOS_AR_Customer.CustszAddress_1 AS AlamatKirim, dbo.BOS_AR_Customer.szTaxId, dbo.BOS_AR_Customer.CustszAddress_1 AS AlamatTagih, dbo.BOS_AR_Customer.CustszCity, dbo.BOS_AR_Customer.CustszZipCode, dbo.BOS_AR_Customer.szStatus, dbo.BOS_AR_CustSales.szPaymentTermId, dbo.BOS_AR_CustSales.decCreditLimit,BOS_AR_Customer.dtmStart,BOS_AR_Customer.dtmLastUpdated FROM dbo.BOS_PI_Employee Emp1 LEFT OUTER JOIN BOS_PI_Employee Emp2 on Emp1.szSupervisorID = Emp2.szEmployeeID Left outer join dbo.BOS_GL_Workplace ON Emp1.szWorkplaceId = dbo.BOS_GL_Workplace.szWorkplaceId LEFT OUTER JOIN dbo.BOS_PI_Division ON Emp1.szDivisionId = dbo.BOS_PI_Division.szDivisionId LEFT OUTER JOIN dbo.BOS_PI_Team ON Emp1.szTeamId = dbo.BOS_PI_Team.szTeamId LEFT OUTER JOIN BOS_SD_Route on Emp1.szEmployeeId = BOS_SD_route.szOPuserId LEFT OUTER JOIN BOS_SD_RouteItem on BOS_SD_Route.szRouteId = BOS_SD_RouteItem.szRouteID LEFT OUTER JOIN BOS_AR_Customer on BOS_SD_RouteItem.szCustID = BOS_AR_Customer.szCUstID LEFT OUTER JOIN BOS_AR_CustSales on BOS_AR_Customer .szCustId = BOS_AR_CustSales.szCustID When I run that query, it was working fine the result was correct. Then I tried to add the where clause, like this:WHERE BOS_AR_Customer.dtmLastUpdated >= '8/1/2006' AND BOS_AR_Customer.dtmLastUpdated <='9/21/2007'And it was also working fine, the result was also correct--pay attention dudes the date format is mm/dd/yyyyThen I try to change the date format to dd/mm/yyyy in the where clause like this (because later I realized that, this is the query that gonna be used):WHERE BOS_AR_Customer.dtmLastUpdated >= '1/8/2006' AND BOS_AR_Customer.dtmLastUpdated <='21/9/2007'The result was an error message saying:"The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value."Can you tell me whats wrong, please. I appreciate anykinds of help guys, thanks. FYI : I use SQL SERVER 2000 Best Regards.
View 1 Replies
View Related
Jul 6, 2005
I'm having trouble getting a query to run that contains an IF statement:
*****************************************
DECLARE @lid int, @ptf varchar(50)
SET @lid = 3
set @ptf = '05-00005'
SELECT
tblInfoData.PTFileNumber AS [PT File Number],
IF @lid > 3
BEGIN
tblInfoData.OrigGrantor AS [Original Grantor],
END
tblPropertyData.propStreet AS [Property Address],
tblPropertyData.propCity AS City,
tblPropertyData.propState AS State,
tblPropertyData.propZip AS Zip,
tblSaleData.OrigSaleDate AS [Original Sale Date],
tblInfoData.Status AS Status
FROM tblInfoData INNER JOIN
tblPropertyData ON tblInfoData.PTFileNumber = tblPropertyData.PTFileNumber INNER JOIN
tblSaleData ON tblInfoData.PTFileNumber = tblSaleData.PTFileNumber
WHERE CONTAINS(tblInfoData.PTFileNumber, @ptf)
*********************************************
This throws the following error in Query Analyser:
Server: Msg 156, Level 15, State 1, Line 12
Incorrect syntax near the keyword 'IF'.
Server: Msg 170, Level 15, State 1, Line 14
Line 14: Incorrect syntax near 'tblInfoData'.
Any help/ideas?
thanx
</c>
View 6 Replies
View Related
May 23, 2007
While MOM processes are running at some point, a process goes into deadlock and uses up all existing CPUs.
Sysprocesses shows this it opened up 4 threads and program name is Microsoft® Reliability Analysis Service.
Profiler doesn't show which command it was trying to execute, but last notable command which has started was MRAS_pcLoad EXECUTE @i_Return_Code = sp_getapplock @Resource = N'MOM.Datawarehousing.DTSPackageGenerator.exe', @LockMode = N'Exclusive', @LockOwner = N'Session', @LockTimeout =
Can you please help us, what could be the problem. It has been running fine till couple of days back.
--Prabhu
View 5 Replies
View Related
Sep 19, 2005
Can anyone explain what's wrong with this code which is supposed to populate a dropdownlist using a parametised stored procedure and SqlDataAdapter?
objCmd = new SqlCommand("bs_GetActivityValueTypes", objConn.GetConnection()); objCmd.Parameters.Add("@scid", SqlDbType.Int);objCmd.Parameters["@scid"].Value = Convert.ToInt32(Request.QueryString["scorecard"].ToString()); objAdapter = new SqlDataAdapter(objCmd);objAdapter.Fill(dsInitData, "tblValueTypes");
comboResultType.DataSource = dsInitData.Tables["tblValueTypes"]; comboResultType.DataValueField = "Type_ID";comboResultType.DataTextField = "Type_Desc";comboResultType.DataBind(); comboResultType.Items.Insert(0, new ListItem("- Select a value type -", ""));Basically, if I remove the parameter from the code and the stored procedure it works fine, but when I add the parameter back I get an "Incorrect syntax near 'bs_GetActivityValueTypes'" error at line: objAdapter.Fill(dsInitData, "tblValueTypes"); This makes no sense to me because I know the stored procedure is well formed and I've used almost identical code elsewhere. All variables are declared further up the code. Someone help please!
View 3 Replies
View Related
Aug 1, 2006
i am testing some encryption
scenarios ,in profiler the statements like "OPEN KEY" and all "Encrypt"
and "Decrypt" functions are removed automaticly from the trace
and replaced with a comment ,create a trace and try the code i attached ,
you will see in profiler trace that that all encryption related commands
are commented out ,this is what expected.
but now go to the batch and comment out the "SELECT @rrr' statment,
and run the batch ,this batch will fail beacuse "@rrr" is not declared,
now go back to profiler and you will see that for the failed batch
all the encryption command are NOT COMMENTED OUT !!!
esspecially important is the visibility of the password of the open key command.
seems like a very dangerous bug to me!!!
CREATE CERTIFICATE test1
ENCRYPTION BY PASSWORD = 'pGFD4bb925DGvbd2439587y'
WITH SUBJECT = 'Sammamish Shipping Records',
EXPIRY_DATE = '10/31/2009';
GO
CREATE SYMMETRIC KEY Key09 WITH ALGORITHM = TRIPLE_DES
ENCRYPTION BY CERTIFICATE test1;
GO
declare @Str nvarchar(100)
declare @Enc varbinary(max)
set @Str = 'encrypt this'
OPEN SYMMETRIC KEY Key09
decryption by CERTIFICATE test1 WITH PASSWORD = 'pGFD4bb925DGvbd2439587y'
SET @Enc
= EncryptByKey(Key_GUID('Key09'), @Str);
---select @rrr
select CONVERT(nvarchar(100), DecryptByKey(@Enc))
go
View 1 Replies
View Related
Aug 10, 2015
I am doing a distinct count on a related table's column, but get an out of memory error if I run it for the entire table (works great for just a few rows when filtered down).The error I get is: "We couldn't get data from the external source.The operation has been cancelled because there is not enough memory available for the application. If using 32-bit version of the product consider upgrading.
I know I can add a related column and that works fine...but that seems to me like I've defeated the purpose, I have a good and proper lookup table, and should be able to run my query against its relationship.Here is the query and details below *Note I supplied a scaled down sample, on my actual model I receive these errors, not in the sample as it has only a few rows
List Workers Distinct Project Customers:=CALCULATE(DISTINCTCOUNT(Projects[CustomerID]),'WorkersToProjects')
Other measure which returns no errors, but included for completeness:
List Workers Projects:=CALCULATE(DISTINCTCOUNT([ProjectID]),ISBLANK(WorkersToProjects[ProjectID])=FALSE())
My goal here is to allow the user to view the workers assigned to a project, but also get counts of the workers assigned to the CUSTOMER of a project. For example, suppose we lose a customer, we want to see how many workers would be impacted by that, so a count of projects per worker is not useful there, we need to see a count of workers per project's customer (owner of project whom project work is being done for)The question being: How can I accomplish this:
1. WITHOUT adding a calculated column to WorkersToProjects (of Projects.CustomerID)
2. WITH better performance?
There must be a better way to write this DAX to still get the correct answer?*Pic of pivot table, again, the numbers are accurate but the formula used to List Workers Distinct Project Customers measure does NOT scale :( 3 count for red , the number of Projects John has and 2 count for blue, the unique customers/owners of those projects "Veridian Dynamics" and "Massive Dynamic". URL....
View 3 Replies
View Related
Aug 18, 2006
I get an error dialog when I try to create a new SQL database, both via the Add New Item dialog and the property wizard of a new SqlDataSource control. The error is:
Local Database File:
User does not have permission to perform this action.
I've searched for help with this.
I ensured the App_Data folder exists and I added the local ASP.NET account to the group that have R/W access to it (although the RO flag is in an unchangeable tri-state on the folder).
The SQL Server Express error log is clean and indicates full functionality.
Everything is running locally.
No VWD installation errors.
Any ideas?
Thank you!
View 3 Replies
View Related
Feb 15, 2008
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
here is my web.config file:<?xml version="1.0"?><!--
Note: As an alternative to hand editing this file you can use the
web admin tool to configure settings for your application. Use
the Website->Asp.Net Configuration option in Visual Studio.
A full list of settings and comments can be found in
machine.config.comments usually located in
WindowsMicrosoft.NetFrameworkv2.xConfig
--><configuration xmlns="http://schemas.microsoft.com/.NetConfiguration/v2.0">
<appSettings><add key="EmailFrom" value="webmaster@reaganpower.com"/>
<add key="EmailSubject" value="File Ready for Download!"/><add key="SmtpServer" value=""/>
<add key="MailUser" value=""/><add key="MailPassword" value=""/>
<add key="MailPort" value="25"/><add key="EmailFormatSelected" value="Text"/>
<add key="PageTitle" value="Send It Now!"/><add key="ShareLocalFolderPath" value="H:MIS DepartmentIntranetSendItNowFileStorage"/>
<add key="httpDownloadPath" value="http://misfs/SendItNow/ContentFiles/"/>
<!--
<add key="CurrentTheme" value="CleanBlue" />-->
<add key="CurrentTheme" value="CleanOrange"/></appSettings>
<connectionStrings>
<add name="ConnectionString" connectionString="Data Source=(local)SqlExpress;AttachDbFilename=|DataDirectory|FileShareDB.mdf;Integrated Security=True;User Instance=True"providerName="System.Data.SqlClient"/>
</connectionStrings><system.web><!--
Set compilation debug="true" to insert debugging
symbols into the compiled page. Because this
affects performance, set this value to true only
during development.
Visual Basic options:
Set strict="true" to disallow all data type conversions
where data loss can occur.
Set explicit="true" to force declaration of all variables.-->
<identity impersonate="false"/>
<roleManager enabled="true"/><compilation debug="true" strict="false" explicit="true">
<assemblies><add assembly="System.Design, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/></assemblies></compilation>
<pages><namespaces>
<clear/><add namespace="System"/>
<add namespace="System.Collections"/><add namespace="System.Collections.Specialized"/>
<add namespace="System.Configuration"/><add namespace="System.Text"/>
<add namespace="System.Text.RegularExpressions"/><add namespace="System.Web"/>
<add namespace="System.Web.Caching"/><add namespace="System.Web.SessionState"/>
<add namespace="System.Web.Security"/><add namespace="System.Web.Profile"/>
<add namespace="System.Web.UI"/><add namespace="System.Web.UI.WebControls"/>
<add namespace="System.Web.UI.WebControls.WebParts"/><add namespace="System.Web.UI.HtmlControls"/>
</namespaces></pages>
<!--
The <authentication> section enables configuration
of the security authentication mode used by
ASP.NET to identify an incoming user. -->
<authentication mode="Forms"/>
<!--
The <customErrors> section enables configuration
of what to do if/when an unhandled error occurs
during the execution of a request. Specifically,
it enables developers to configure html error pages
to be displayed in place of a error stack trace.
<customErrors mode="RemoteOnly" defaultRedirect="GenericErrorPage.htm">
<error statusCode="403" redirect="NoAccess.htm" />
<error statusCode="404" redirect="FileNotFound.htm" />
</customErrors>-->
</system.web>
</configuration>
View 2 Replies
View Related
Feb 4, 2006
Looking for help in diagnosing this error:
Unable to open the physical file "C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDatacartracker.mdf". Operating system error 32: "32(error not found)".
An attempt to attach an auto-named database for file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDatacartracker.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
I am using Visual Basic 2005 Express Edition along with SQL Server 2005 Express Edition.
Now here's what I did:
Rather than use the Database Explorer within VB2005 EE to create my database, I thought I would try creating my database externally using the downloadable "SQL Server Management Studio Express" tool. (I figured that if I had a stable data model for my database, I could side-step the copying/overwriting issues that come with creating a database as part of a VB solution.)
So having gotten my database setup and populated with some sample data, I am now trying to connect to it from Visual Basic. In VB (in the context of working on a VB Solution), I do the following:
Select Add New Data Source... from the Data menu to bring up the Data Source Configuration Wizard.
Choose "Database" for the data source type and click Next.
Click "New Connection..." to bring up the Add Connection dialogue.
For data source I choose "Microsoft SQL Server Database File", with ".NET Framework Data Provider..." as the data provider.
Navigate to my existing database file (in "C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData" folder).
Use Windows Authentication.
When I click "Test Connection" or just click "OK", i get the Microsoft Visual Basic 2005 Express Edition error shown at the top of this message.
Is this occuring because I'm trying to access my database as an .MDF file rather than through Named Pipes / Shared Memory / TCP/IP? If this is the case, is there any way that I can tell VB2005 EE to use Named Pipes / Shared Memory / TCP/IP? Is this a fundamental limitation of VB2005 EE?
Thanks in advance to the guru who is able to explain this to me...
View 8 Replies
View Related
Mar 8, 2008
Hi,
I'm getting an error while trying to install SQL Server Express 2005 Express Edition. I'm attaching the log of the installation process here. Please throw some light on the same.
Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (3) The system cannot find the path specified.
.
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='203'>
Doing Action: Do_sqlShutDownRANUInstance
PerfTime Start: Do_sqlShutDownRANUInstance : Sat Mar 08 21:39:12 2008
<Func Name='Do_sqlShutDownRANUInstance'>
Service SQLEXPRESS with parameters '' is being started at Sat Mar 08 21:39:12 2008
Unable to start service (3)
Error Code: 0x80070003 (3)
Windows Error Text: The system cannot find the path specified.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqls:ervice:tart
Source Line Number: 316
---- Context -----------------------------------------------
Setting status of unmanaged components and removing unmanaged resources
Error Code: 3
MSI (s) (D0!64) [21:39:17:257]: Product: Microsoft SQL Server 2005 -- Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (3) The system cannot find the path specified.
.
Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (3) The system cannot find the path specified.
.
View 4 Replies
View Related
Mar 3, 2008
So i am getting an error of "An error has occurred while establishing a connection to the server. When connecting to SQL Server 205, this faliure may be caused by the fact that under the defualt setting SQL Server does not allow remote connections.(ProviderQL Net work Interfaces, error: 26- Eror Locating Server?Instance Specified)
So i have Windows Xp SP2,750 mb Ram, 1.6 Ghz, Uninstalled Everything (visual basic express,SQL express) then reinstalled everthing all over again. Same problem . Any Ideas???
View 1 Replies
View Related
Mar 20, 2008
Hi thanks for looking at my question
Using sqlServer management studio 2005
My Tables are something like this:
--Table 1 "Employee"
CREATE TABLE [MyCompany].[Employee](
[EmployeeGID] [int] IDENTITY(1,1) NOT NULL,
[BranchFID] [int] NOT NULL,
[FirstName] [varchar](50) NOT NULL,
[MiddleName] [varchar](50) NOT NULL,
[LastName] [varchar](50) NOT NULL,
CONSTRAINT [PK_Employee] PRIMARY KEY CLUSTERED
(
[EmployeeGID]
)
GO
ALTER TABLE [MyCompany].[Employee]
WITH CHECK ADD CONSTRAINT [FK_Employee_BranchFID]
FOREIGN KEY([BranchFID])
REFERENCES [myCompany].[Branch] ([BranchGID])
GO
ALTER TABLE [MyCompany].[Employee] CHECK CONSTRAINT [FK_Employee_BranchFID]
-- Table 2 "Branch"
CREATE TABLE [Mycompany].[Branch](
[BranchGID] [int] IDENTITY(1,1) NOT NULL,
[BranchName] [varchar](50) NOT NULL,
[City] [varchar](50) NOT NULL,
[ManagerFID] [int] NOT NULL,
CONSTRAINT [PK_Branch] PRIMARY KEY CLUSTERED
(
[BranchGID]
)
GO
ALTER TABLE [MyCompany].[Branch]
WITH CHECK ADD CONSTRAINT [FK_Branch_ManagerFID]
FOREIGN KEY([ManagerFID])
REFERENCES [MyCompany].[Employee] ([EmployeeGID])
GO
ALTER TABLE [MyCompany].[Branch]
CHECK CONSTRAINT [FK_Branch_ManagerFID]
--Foreign IDs = FID
--generated IDs = GID
Then I try a simple single row DELETE
DELETE FROM MyCompany.Employee
WHERE EmployeeGID= 39
Well this might look like a very basic error:
I get this Error after trying to delete something from Table €śEmployee€?
The DELETE statement conflicted with the
REFERENCE constraint "FK_Branch_ManagerFID".
The conflict occurred in database "MyDatabase",
table "myCompany.Branch", column 'ManagerFID'.
Yes what I€™ve been doing is to deactivate the foreign key constraint, in both tables when performing these kinds of operations, same thing if I try to delete a €śBranch€? entry, basically each entry in €śbranch€? and €śEmployee€? is child of each other which makes things more complicated.
My question is, is there a simple way to overcome this obstacle without having to deactivate the foreign key constraints every time or a good way to prevent this from happening in the first place? Is this when I have to use €śON DELETE CASCADE€? or something?
Thanks
View 8 Replies
View Related
Mar 28, 2007
Que tal. Al iniciar el instalador SQL Server 2005 Express me saca el error "System Configuration Checker cannot be executed due to WMI configuration on te machine..." Si alguien sabe como solucionarlo agradeceria se ayuda. Gracias.
View 1 Replies
View Related
Dec 20, 2006
Hi,
I am trying to install "Microsoft SQL Server 2005 Express Edition" through VS2005 Setup but it is always failing to install. I am presenting here log file information.I appriciate if any one help me on this..I have marked all failed message with red color
--------------------------------------------------------------------------------------------------------------------
Microsoft SQL Server 2005 9.00.1399.06
==============================
OS Version : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Time : Wed Dec 20 15:04:57 2006
Machine : DATLA
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SQLSupport_1.log
--------------------------------------------------------------------------------
Machine : DATLA
Product : Microsoft SQL Server Native Client
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SQLNCLI_1.log
--------------------------------------------------------------------------------
Machine : DATLA
Product : Microsoft SQL Server VSS Writer
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SqlWriter_1.log
--------------------------------------------------------------------------------
Machine : DATLA
Product : MSXML 6.0 Parser
Product Version : 6.00.3883.8
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_MSXML6_1.log
--------------------------------------------------------------------------------
Machine : DATLA
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SQLSupport_2.log
--------------------------------------------------------------------------------
Machine : DATLA
Product : Microsoft SQL Server Native Client
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SQLNCLI_2.log
--------------------------------------------------------------------------------
Machine : DATLA
Product : MSXML 6.0 Parser
Product Version : 6.00.3883.8
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_MSXML6_2.log
--------------------------------------------------------------------------------
Machine : DATLA
Product : SQL Server Database Services
Error : Failed to set registry settings for server network libraries. The action is SetDefaults. The error is 111 (The file name is too long.
)
--------------------------------------------------------------------------------
Machine : DATLA
Product : SQL Server Database Services
Error : Failed to set registry settings for server network libraries. The action is SetDefaults. The error is 111 (The file name is too long.
)
--------------------------------------------------------------------------------
Machine : DATLA
Product : Microsoft SQL Server 2005 Express Edition
Product Version : 9.00.1399.06
Install : Failed
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SQL.log
Last Action : InstallFinalize
Error String : Failed to set registry settings for server network libraries. The action is SetDefaults. The error is 111 (The file name is too long.
Error Number : 29530
--------------------------------------------------------------------------------
Machine : DATLA
Product : Microsoft SQL Server 2005 Tools Express Edition
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_Tools.log
--------------------------------------------------------------------------------
SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%Microsoft SQL Server90Setup BootstrapLOGSummary.txt.
Time : Wed Dec 20 15:19:47 2006
List of log files:
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_Core(Local).log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SQLSupport_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SQLNCLI_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SqlWriter_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_MSXML6_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SQLSupport_2.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SQLNCLI_2.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_MSXML6_2.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SQL.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_Tools.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_Datastore.xml
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_.NET Framework 2.0.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SNAC.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_Core.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSummary.txt
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_Support.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SCC.log
---------------------------------------------------------------------------------------------------------------
Thanks in Advance.
View 2 Replies
View Related
Dec 8, 2005
I have tried installing SQL Express using the latest download. I've also intalled the latest Windows Installer (3.1) but I have the following error message (taken from log). All contributions gratefully accepted
View 3 Replies
View Related
Nov 23, 2004
Hi,
Is there a format function in MDX which will help me solve the following
scenario:
One of my measures is Net Sales and I have tried all different formats
in Analysis Services so that it shows without the decimal places i.e.
instead of showing the Net Sales for any selected combination of
Dimensions as 123,456.04, I want to show it as 123,456
When I browse the cube (in Analysis Services), I can meet my
requirement. However, in my front-end (Microsoft Data Analyzer), I am
still getting it as 123,456.04 (even when the same in Analysis services,
i.e. when I browse the cube, is being shown as 123,456).
I do not have much choice at the moment and am stuck with Microsoft Data
Analyzer and unfortunately have not been able to solve this :(
Can someone think of a solution/workaround/use of MDX which will help me
get the results being displayed without the decimal. Is there a format function that I can use in MDX and how to use it???
Many TIA
View 2 Replies
View Related
Aug 5, 2006
Hello,What is uniqueidentifier as a data type?Also what is the data type for setting unique STRINGS ((nchar,nvarchar), for example to be used for emails and user names in a userregistration system).SQL Server does not allow me set primary keys for columns where datatypes are not INT.Thanks in advance.
View 3 Replies
View Related
Nov 20, 2006
I've been working on a performance review web application (i.e., employee's annual reviews done via the web). In the process of creating the application I've been teaching myself .NET - maybe not the best way to do it but I've been learning a lot. However, I still feel like I'm not doing something right.On each Page_Load I'm doing database work with a data reader: Reading the data in, displaying it, letting the user add, edit, or delete it, etc. So every Page_Load code behind looks like this: string sql = "SELECT UserID, Passwd, RecID, Name FROM UserList";
SqlConnection myConn = new SqlConnection("Server=BART; Database=WSSD; User ID=sa; Password=wss1231");
SqlCommand cmd = new SqlCommand(sql, myConn);
SqlDataReader dr;
myConn.Open();
dr = cmd.ExecuteReader(); And so forth and so on. Now since I re-use this code again and again - I imagine it's a good idea to implement my connection code in a class that I can re-use easily. But I have no idea where to start on something like that. What can I say? I'm a newb. A push in the right direction would be great.
View 8 Replies
View Related
Jan 5, 2008
I have the following tablestblUserdatausercode username firstname lastname5 peter peter smith11 john433 john doe15 simonsays Simon SmithtblEventsID postedbycode title eventtext createdate1 5 woodstock 'oldies' 12/12/20082 11 love parade 'dance all night 1/1/20083 11 spring break 'great party' 2/2/2006tblEventVisitorsusercode eventid5 15 311 111 211 3As you can see User John433 is going to 3 events.But I only want to select the one that has the first upcoming startdate bigger than now: getdate()Desired output would be:username firstname lastname eventid title eventtext eventdatepeter Peter Smith 1 woodstock 'oldies' 12/12/2008john433 john doe 2 love parade 'dance all night 1/1/2008simonsays Simon Smith NULL NULL NULL NULLHow can I make such a selection? (perhaps see this thread for similar info: http://forums.asp.net/t/1201266.aspx)Thanks!
View 16 Replies
View Related
Feb 12, 2008
I want to make simple database application but I want that I make just one transaction with the database..
If I have , say 10 insert queries, i want to transact with the database just once.
Somebody told me this could be done by 'containers' or 'data transfer objects'
So please, somebody help..
View 1 Replies
View Related
Mar 10, 2005
Hi,
I made a DTS which appends data coming infrom a view to an exisiting table.So far no problem and all goes well.
I am facing a problem due to the format of the date that is coming in (getting appended) and while going through BOL, came across the following topic:
mk:@MSITStore:C:Program%20FilesMicrosoft%20SQL%2 0Server80ToolsBookshowtosql.chm::/ht_dts_trns_97ou.htm
I tired the above tips but it appears that if I try to do this in my DTS (which appends data),the logic of the DTS will change. A single arrow also gets added whichI think represents a simple mapping/transformation rather than a append. To clarify my point, please note the attached image which represents that the data is being appended (due to the many sided arrows pointing to the source and destination - visible under the Transformations tab of my DTS).
Sincerely hoping that my post is clear, can someone help me find how to make changes in a DTS (which appends data) and ensuring that thelogic remains the same i.e. it should append data.
Many TIA
View 4 Replies
View Related
Jul 24, 2007
I have a function written in postgresql that I want to create in sql server (UDF). After effort of full day I am seding this request to please help me, here is the function:
CREATE OR REPLACE FUNCTION fn_comma_env(int4)
RETURNS text AS
$BODY$
DECLARE
rec record;
str text;
comstr text;
BEGIN
str := '';
comstr := '';
FOR rec IN SELECT class.classname FROM hostenv, class WHERE hostenv.classid = class.classid AND (hostenv.hostid = $1) LOOP
str := str || comstr || rec.classname;
comstr := ',';
END LOOP;
RETURN str;
END;
$BODY$
LANGUAGE 'plpgsql' VOLATILE;
Thanks in advance,
Syed
View 1 Replies
View Related
Jun 20, 2008
select @xml = bulkcolumn from openrowset(bulk 'C:Documents and
SettingsKasiDesktopewsrss.xml' , single_blob) as channel
here after bulk instead of giving path, we have to give parameter so that the paramter takes the value from the table.
the tables contains paths of xml files
View 2 Replies
View Related
Jan 4, 2006
there is a prblem with data in pivoting the table.
problem is like this--
there is some data 'xy' and some data 'xy '. when i m giving 'xy' as a pivot key value it doesent recognise 'xy ' and viseversa..
i can't reduce the size of the datatype coz there is some data of diffrent size as 'abcd'.
this data is loaded from excel sheet to sql sever table.
wht can i do for this problem.
is there any method to truncate the indivisual data, i m using nvarchar datatype for this.
View 2 Replies
View Related
Jan 12, 2007
Hi friends,
I am backing up the database using the Database Maintenance Plan.
Everything is in place. I want to save the file name in the format yyyy-mm-dd_finbck.bak. how can i assign the date from here itself ? this should be done through the DB maintenance plan only.
is it possible ? can we assign the date to the backup file through the DB maintenence plan ?
kindly guide.
Regards,
Amit
View 4 Replies
View Related
Dec 10, 2007
Dear All,
Could anyone guide me to prepare for the Interview in SQL SERVER 2005.
I have studied the relevant things from background knowledge from the SQL Server books. But is there any specific areas in which I have to concentrate for the sake of Interview?
Thanks in Advance.
View 16 Replies
View Related
Jul 23, 2005
Is it possible to retrieve all tables that a given one is related tovia foreign keys?
View 2 Replies
View Related
Aug 11, 2005
We had been running SQL Server without any control of security (sincethe company is very small -100 employees). All of us know the adminpassword and has been accessing the database as admin. Our databaseserver crashed due to hardware failure twice last month and we lost alot of important data. Now the management is taking the control ofserver access seriously.SQL Enterprise manager is installed on many PCs and any one can deleteany database with a right click.My question is:1. Can the enterprise manager be installed on client's PC with alimited right (or as a user not as admin)?We need to limit the user's access of using the Enterprise Manager.In other words, how can we set this up for different users.2. How can we keep running SQL Server if one server fails?Clustering or Replication or Mirroring? OI would highly appreciate if you could direct me to any website orresources on how to set up security of SQL Server (2000 with the latestservice pack).Thanks a million in advance.Best regards,Mamun
View 2 Replies
View Related
Oct 26, 2006
Any idea the cause of this error. I got it while trying to execute a stored proc (in sql 2005). I had just restored database and below error is stucking me to move ahead. Any help please
Error invoking method 'ExecuteQuery' for transaction (Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding)
View 1 Replies
View Related
Jul 25, 2007
I have a function written in postgresql that I want to create in sql server (UDF). After effort of full day I am seding this request to please help me, here is the function:
CREATE OR REPLACE FUNCTION fn_comma_env(int4)
RETURNS text AS
$BODY$
DECLARE
rec record;
str text;
comstr text;
BEGIN
str := '';
comstr := '';
FOR rec IN SELECT class.classname FROM hostenv, class WHERE hostenv.classid = class.classid AND (hostenv.hostid = $1) LOOP
str := str || comstr || rec.classname;
comstr := ',';
END LOOP;
RETURN str;
END;
$BODY$
LANGUAGE 'plpgsql' VOLATILE;
Thanks in advance,
Syed
View 1 Replies
View Related
Mar 20, 2008
Hi,
I have a data including "year", "month" and "day" columns and I'm using these columns as parameter to create a report. I'm using the parameters successfully in my report. I import all possible year-month-day combinations but in my data there are some unmatched combinations. (For ex, for 2007 there's just last 3 months of the year, and some days are missing) To make the report more affective, I wanna make the parameters dynamic; when I choose 2007 in year-combobox I wanna see just the related months (not all 12) and the related days after I choose the month. Is it possible in reporting services?
View 9 Replies
View Related
Apr 3, 2007
hi there,
please i want any body to help me on this.I'm working on internal website at my company using iis5,sql server 2005 express,visual studio 2005 and windows xp sp2.
After I attached the db using microsoft management studio express and deployed the files C:InetpubwwwrootXCopyDeploy on IIS.when I run the application using localhost
http://localhost/XCopyDeploy/Default.aspx. any files have connection with database gives me that error
Unable to open the physical file "D:XCopyDeployApp_Datacompany.mdf". Operating system error 5: "5(error not found)".
An attempt to attach an auto-named database for file D:XCopyDeployApp_Datacompany.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Unable to open the physical file "D:XCopyDeployApp_Datacompany.mdf". Operating system error 5: "5(error not found)".
An attempt to attach an auto-named database for file D:XCopyDeployApp_Datacompany.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
I dont know what to do this is the third time I reinstall the windows and the sql server 2005 and i still face this problem.i made sure that I didnt attach more than one db file on microsoft management studio.I'm also administrator on my machine which is in a network domain.
also,I heared that sql express is not suitable to work in development stage.is that correct ?so,which db is better than it ?
View 5 Replies
View Related
